Cisco Unified IP Phone 7900 Series

Table Of Contents

Cisco IP Phone 7902G/7905G/7912G Release Notes for Firmware Release 6.0(0) for Cisco CallManager 3.3.2 or Later

Installing Required Firmware for the Cisco IP Phone

Related Documentation

Resolved Defects

Known Defects

Obtaining Documentation

Cisco.com

Ordering Documentation

Documentation Feedback

Obtaining Technical Assistance

Cisco TAC Website

Opening a TAC Case

TAC Case Priority Definitions

Obtaining Additional Publications and Information

Cisco IP Phone 7902G/7905G/7912G Release Notes for Firmware Release 6.0(0) for Cisco CallManager 3.3.2 or Later

---

February 24, 2005

These release notes include the following sections:

•Installing Required Firmware for the Cisco IP Phone

•Related Documentation

•Resolved Defects

•Known Defects

•Obtaining Documentation

•Obtaining Technical Assistance

•Obtaining Additional Publications and Information

Installing Required Firmware for the Cisco IP Phone

Before using the Cisco IP Phone models 7902G, 7905G, and 7912G with Cisco CallManager release 3.3.2 or later, you must install the latest firmware on all Cisco CallManager servers in the cluster. The firmware image names are:

•For the Cisco IP Phone 7902G: CP7902060000SCCP050124A

•For the Cisco IP Phone 7905G: CP7905060000SCCP050124A

•For the Cisco IP Phone 7912G: CP7912060000SCCP050124A

To install the firmware, follow these steps:

Procedure

---

Step 1 Go to the following URL:

http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser

Step 2 Double-click one of the following hyperlinks, and follow the prompts to download the firmware:

•For the Cisco IP Phone 7902G: cmterm-7902g-sccp.6-0-0.exe

•For the Cisco IP Phone 7905G: cmterm-7905g-sccp.6-0-0.exe

•For the Cisco IP Phone 7912G: cmterm-7912g-sccp.6-0-0.exe

Step 3 Go back to the URL shown in Step 1, double-click one of the following hyperlinks, and follow the prompts to download the Readme file, which contains installation instructions for the corresponding firmware:

•For the Cisco IP Phone 7902G: cmterm-7902g-sccp.6-0-0-Readme.htm

•For the Cisco IP Phone 7905G: cmterm-7905g-sccp.6-0-0-Readme.htm

•For the Cisco IP Phone 7912G: cmterm-7912g-sccp.6-0-0-Readme.htm

Step 4 Follow the instructions in the Readme file to install the firmware.

---

Related Documentation

For more information about Cisco IP Phones, refer to the following publications, which are available at this URL:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm

•Cisco IP Phone Administration Guide for Cisco CallManager Models 7902G, 7905G, and 7912G

•Cisco IP Phone 7902G Phone Guide

•Cisco IP Phone 7905G/7912G Phone Guide

•Customizing Your Cisco IP Phone on the Web

•Regulatory Compliance and Safety Information for the Cisco IP Phone 7900 Series

For more information about Cisco CallManager, refer to the following publications, which are available at this URL:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_0/index.htm

•Cisco CallManager Administration Guide

•Cisco CallManager Features and Services Guide

•Cisco CallManager System Guide

•Cisco CallManager Serviceability Administration Guide

•Cisco CallManager Serviceability System Guide

•Cisco IP Telephony Troubleshooting Guide for Cisco CallManager

•Bulk Administration Tool User Guide

Resolved Defects

Table 1 describes Severity 1, 2, and 3 defects that were resolved in this release.

Table 1 Defects Resolved in this Release 

Identifier	Summary
CSCeg20129	Cisco IP Phone models 7905G/7912G may crash and fail on re-registering
CSCeg24105	Multiple Calls on Directory Number calls were disconnected by Cisco CallManager failover
CSCeg36552	OPickUp softkey does not work on Cisco IP Phone models 7905G/7912G
CSCeg37103	Cisco IP Phone models 7905G/7912G reboot with keep-conference feature
CSCeg43626	Phone does not accept DHCP ACK sent to the broadcast address
CSCeg45959	Select softkey in phrase 609 and 178 should be defined properly
CSCeg48526	Cisco IP Phone 7912G: unable to be registered when user locale is Japanese
CSCeg48734	Cisco IP Phone 7905G web server sends data in wrong HTTP version
CSCeg59743	Cisco IP Phone models 7905G/7912G does not add 802.1p tag when no VLAN is configured

Known Defects

Table 2 describes known Severity 1, 2, and 3 defects in this release.

If you have an account with Cisco.com, you can use the Bug Toolkit to find defects of any severity for any release.

To access the Bug Toolkit, perform either of these actions:

•Go to this URL: http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl

•Log in to Cisco.com, click Technical Support, then click Tools & Utilities, then click Software Bug Toolkit under Troubleshooting Tools

Table 2 Known Defects in this Release 

Identifier	Headline and Bug Toolkit Link
CSCeg27958	TFTP Client Busy Retry Behavior http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCeg27958
CSCeg51314	Cisco IP Phone 7912G does not display correct softkeys when using MCDN feature http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCeg51314
CSCeg87585	Cisco IP Phone 7912G cannot ring immediately when receiving a call after fallback http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCeg87585
CSCeh01236	MWI will be turned off by incoming call http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCeh01236
CSCeh06814	Cisco IP Phone 7912G ignores StationClearPriNotifyMessage from Cisco CallManager Express http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCeh06814

Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.

Cisco.com

You can access the most current Cisco documentation on the World Wide Web at this URL:

http://www.cisco.com/univercd/home/home.htm

You can access the Cisco website at this URL:

http://www.cisco.com

International Cisco websites can be accessed from this URL:

http://www.cisco.com/public/countries_languages.shtml

Ordering Documentation

You can find instructions for ordering documentation at this URL:

http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm

You can order Cisco documentation in these ways:

•Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Ordering tool:

http://www.cisco.com/en/US/partner/ordering/index.shtml

•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).

Documentation Feedback

You can submit e-mail comments about technical documentation to bug-doc@cisco.com.

You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:

Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Obtaining Technical Assistance

For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, the Cisco Technical Assistance Center (TAC) provides 24-hour-a-day, award-winning technical support services, online and over the phone. Cisco.com features the Cisco TAC website as an online starting point for technical assistance. If you do not hold a valid Cisco service contract, please contact your reseller.

Cisco TAC Website

The Cisco TAC website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The Cisco TAC website is available 24 hours a day, 365 days a year. The Cisco TAC website is located at this URL:

http://www.cisco.com/tac

Accessing all the tools on the Cisco TAC website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a login ID or password, register at this URL:

http://tools.cisco.com/RPF/register/register.do

Opening a TAC Case

Using the online TAC Case Open Tool is the fastest way to open P3 and P4 cases. (P3 and P4 cases are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Case Open Tool automatically recommends resources for an immediate solution. If your issue is not resolved using the recommended resources, your case will be assigned to a Cisco TAC engineer. The online TAC Case Open Tool is located at this URL:

http://www.cisco.com/tac/caseopen

For P1 or P2 cases (P1 and P2 cases are those in which your production network is down or severely degraded) or if you do not have Internet access, contact Cisco TAC by telephone. Cisco TAC engineers are assigned immediately to P1 and P2 cases to help keep your business operations running smoothly.

To open a case by telephone, use one of the following numbers:

Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447

For a complete listing of Cisco TAC contacts, go to this URL:

http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml

TAC Case Priority Definitions

To ensure that all cases are reported in a standard format, Cisco has established case priority definitions.

Priority 1 (P1)—Your network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.

Priority 2 (P2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.

Priority 3 (P3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.

Priority 4 (P4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.

Obtaining Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

•Cisco Marketplace provides a variety of Cisco books, reference guides, and logo merchandise. Go to this URL to visit the company store:

http://www.cisco.com/go/marketplace/

•The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer support services. Access the Cisco Product Catalog at this URL:

http://cisco.com/univercd/cc/td/doc/pcat/

•Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press online at this URL:

http://www.ciscopress.com

•Packet magazine is the Cisco quarterly publication that provides the latest networking trends, technology breakthroughs, and Cisco products and solutions to help industry professionals get the most from their networking investment. Included are networking deployment and troubleshooting tips, configuration examples, customer case studies, tutorials and training, certification information, and links to numerous in-depth online resources. You can access Packet magazine at this URL:

http://www.cisco.com/packet

•iQ Magazine is the Cisco bimonthly publication that delivers the latest information about Internet business strategies for executives. You can access iQ Magazine at this URL:

http://www.cisco.com/go/iqmagazine

•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:

http://www.cisco.com/ipj

•Training—Cisco offers world-class networking training. Current offerings in network training are listed at this URL:

http://www.cisco.com/en/US/learning/index.html

---

CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StrataView Plus, TeleRouter, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0502R)

Copyright © 2005 Cisco Systems, Inc. All rights reserved.