Feedback
|
Table Of Contents
Cisco Unified IP Phone 6901 and 6911 (SCCP) Release Notes for Firmware Release 9.0(2)
Trust Verification Service and Security by Default
Installing Cisco Unified Communications Manager
Installing Cisco Unified Communications Manager Express
Installing Firmware Release 9.0(2)
Obtaining Documentation and Submitting a Service Request
Cisco Unified IP Phone 6901 and 6911 (SCCP) Release Notes for Firmware Release 9.0(2)
Published: March 31, 2010
Use these release notes with a Cisco Unified IP Phone running SCCP firmware release 9.0(2). This version of firmware release 9.0(2) is compatible with Cisco Unified Communications Manager 8.0.
Note
Firmware release 9.0(2) is compatible with Cisco Unified Communications Manager 7.1(3) by using a device pack.
Contents
These release notes provide the following information. You might need to notify your users about some of the information provided in this document.
•
Obtaining Documentation and Submitting a Service Request
Introduction
The Cisco Unified IP Phone 6901 and 6911 are new, easy-to-use, cost effective IP phones that provide high-quality voice services over IP. These IP phones are suitable for use in elevators, lobbies, hallways, hotel bathrooms and any other location where a basic phone is needed. These IP phones offer a variety of features including:
•
Cisco Unified IP Phone 6901—Dedicated buttons for Hold, Redial, and Volume
•
Cisco Unified IP Phone 6911—Dedicated buttons for Hold, Redial, Volume, Conference, Transfer, Messages, and Speaker
•
Single line—Simplifies user interaction with traditional telephony-like experience
•
Interactive Voice Response (IVR)—Enables access to some features such as voicemail
Related Documentation
Cisco Unified IP Phone Documentation
Refer to publications that are specific to your language, phone model and Cisco Unified Communications Manager release. Navigate from the following documentation URL:
http://www.cisco.com/en/US/products/ps10326/tsd_products_support_series_home.html
Cisco Unified Communications Manager Documentation
Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
Cisco Unified Communications Manager Business Edition Documentation
Refer to the Cisco Unified Communications Manager Business Edition Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release. Navigate from the following URL:
http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html
Cisco Unified Communications Manager Express Documentation
Refer to the Cisco Unified Communications Manager Express Documentation Guide and other publications specific to your Cisco Unified Communications Manager Express release. Navigate from the following URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
New and Changed Information
This section contains these topics:
•
Trust Verification Service and Security by Default
Adaptive LLDP-MED
The Adaptive Link Layer Discovery Protocol-Media Endpoint Device (Adaptive LLDP-MED) feature delays transmitting LLDP packets at IP phone startup until the system verifies that LLDP messaging is supported. During this period, the voice-VLAN phone configuration is available through valid Cisco Discovery Protocol (CDP) messaging. The duration of the verification is typically about 6 to 30 seconds.
The Adaptive implementation was added to the LLDP-MED feature two reasons:
•
Some customers enable Cisco Catalyst Port Security features on the Cisco Catalyst switches that do not support LLDP-MED, which may cause switch ports to shut down and the IP phones to be disabled when port security is enabled.
•
Some legacy Cisco IOS switches do not recognize the LLDP multicast address, which may cause connectivity problems with the IP phones.
The feature affects only the network (switch) port-state machine of the IP phone.
After both CDP and LLDP packets have been received on the SW port, LLDP becomes the preferred protocol. (Even with the Adaptive implementation, some exceptions may cause a port to shut down.)
If the customer's network configuration does not support LLDP messaging, it is recommended that LLDP be disabled permanently in the Cisco Unified CM Administration application in the Phone Configuration window. Failing to disable LLDP when it is not supported may cause issues for customers that are using older or legacy switches with port security enabled.
To disable LLDP in the Cisco Unified CM Administration application, choose Device > Phone, select the appropriate IP phones, and scroll to the Product Specific Configuration Layout pane.
The Adaptive LLDP-MED feature is supported on the following IP phones:
•
Cisco Unified IP Phone 6901
•
Cisco Unified IP Phone 6911
Where to Find More Information
•
Cisco Unified IP Phone Guide
•
Cisco Unified IP Phone Administration Guide
Trust Verification Service and Security by Default
To support secure connections with other components of the system, a Cisco Unified IP Phone authenticates the certificates of the components by validating the certificates with corresponding entries in the Certificate Trust List (CTL) file. The CTL file for all Cisco Unified IP Phone models has a maximum limit of 32 entries.
The Trust Verification Service (TVS) allows the phone to authenticate other components without the need to add the corresponding entry to the CTL file. Adding new components or services does not require the CTL file to be updated on all the phones.
The Security by Default feature removes the restriction that requires the user to create the CTL file by using eTokens to provide and enable security features. The signed file is automatically enabled by default.
The Trust Verification Service and Security by Default feature is supported on the following IP phones:
•
Cisco Unified IP Phone 6901
•
Cisco Unified IP Phone 6911
Where to Find More Information
•
Cisco Unified Communications Manager Administration Guide
•
Cisco Unified Communications Manager Security Guide
Installation Notes
This section contains these sections:
•
Installing Cisco Unified Communications Manager
•
Installing Cisco Unified Communications Manager Express
•
Installing Firmware Release 9.0(2)
Installing Cisco Unified Communications Manager
Before using the Cisco Unified IP Phone with Cisco Unified Communications Manager, you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.
Note
You must install the QED file on Cisco Unified Communications Manager before installing the phone firmware.
To download and install the Cisco Unified Communications Manager version, follow these steps:
Procedure
Step 1
Go to the following URL:
http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=278875240
Step 2
Log in to the Tools and Resources Download Software page.
Step 3
Click + and choose the IP Telephony folder.
Step 4
Choose Call Control > Cisco Unified Communications Manager (CallManager).
Step 5
Choose your Cisco Unified Communications Manager version.
Installing Cisco Unified Communications Manager Express
To download and install the Cisco Unified Communications Manager Express version, follow these steps:
Procedure
Step 1
Go to the following URL:
http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=278875240
Step 2
Log in to the Tools and Resources Download Software page.
Step 3
Click + and choose the IP Telephony folder.
Step 4
Choose Call Control > Cisco Unified Communications Manager Express.
Step 5
Choose your Cisco Unified Communications Manager Express version from the Select a File to Download section.
Installing Firmware Release 9.0(2)
To download and install the phone firmware, follow these steps:
Procedure
Step 1
Go to the following URL:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240
Step 2
Log in to the Tools and Resources Download Software page.
Step 3
Click + and choose the IP Telephony folder.
Step 4
Choose your phone type.
Step 5
Choose 9.0(2) under the Latest Releases folder.
Step 6
To download the SCCP firmware for the Cisco Unified IP Phone, click the Download Now or Add to cart button and follow the prompts:
cmterm-6901_6911-sccp.9-0-2-0.cop.sgn
Note
If you added the firmware file to the cart, click the Download Cart link when you are ready to download the file.
Step 7
Click the + next to the firmware file name in the Download Cart section to access additional information about this file.The hyperlink for the Readme file is in the Additional Information section, which contains installation instructions for the corresponding firmware:
cmterm-6901_6911-sccp.9-0-2-0-readme.html
Step 8
Follow the instructions in the Readme file to install the firmware.
Caveats
This section contains these topics:
Using Bug Toolkit
Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:
•
All severity level 1 or 2 bugs.
•
Significant severity level 3 bugs.
You can search for problems by using the Cisco Software Bug Toolkit.
To access Bug Toolkit, you need the following items:
•
Internet connection
•
Web browser
•
Cisco.com user ID and password
To use the Software Bug Toolkit, follow these steps:
Procedure
Step 1
To access the Bug Toolkit, go
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.
Step 2
Log on with your Cisco.com user ID and password.
Step 3
To look for information about a specific problem, enter the bug ID number in the "Search for bug ID" field, then click Go.
Open Caveats
There are no open caveats for firmware release 9.0(2).
Resolved Caveats
There are no resolved caveats for firmware release 9.0(2).
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
CCDE, CCENT, CCSI, Cisco Eos, Cisco Explorer, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase, Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco TrustSec, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link, LightStream, Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are registered trademarks of Cisco and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1002R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2010 Cisco Systems, Inc. All rights reserved.
Feedback