Guest

Cisco Unified Communications Manager (CallManager)

Using Cisco Unified CallManager Upgrade Utility 4.2(3)

 Feedback

Table Of Contents

Using Cisco Unified CallManager Upgrade Utility 4.2(3)

Contents

Conventions

Related Documentation

Before You Begin

Understanding How the Utility Works

Installing the Utility

Running the Utility

Interpreting the Results

Obtaining the Log File

Obtaining Documentation

Cisco.com

Product Documentation DVD

Ordering Documentation

Documentation Feedback

Cisco Product Security Overview

Reporting Security Problems in Cisco Products

Obtaining Technical Assistance

Cisco Technical Support & Documentation Website

Submitting a Service Request

Definitions of Service Request Severity

Obtaining Additional Publications and Information


Using Cisco Unified CallManager Upgrade Utility 4.2(3)


The Cisco Unified CallManager Upgrade Utility, a nonintrusive tool, detects the health of the servers in the Cisco Unified CallManager cluster before you perform an upgrade to Cisco Unified CallManager.

This version of Cisco Unified CallManager Upgrade Utility replaces previous versions of Cisco Unified CallManager Upgrade Utility, Release 3.3(5), Release 4.0(2a), Release 4.1(2), Release 4.1(3), Release 4.2(1), and Release 4.2(2). Cisco Unified CallManager Upgrade Utility 4.2(3) adds support for multiple version upgrades. Use Cisco Unified CallManager Upgrade Utility, version 4.2(3) or later, to detect the health of your servers before you upgrade to Cisco CallManager Release 3.3(5), 4.0(2a), 4.1(2), 4.1(3), 4.2(1), 4.2(3), and 5.0(1) and later.


Caution This utility identifies problems that could cause the Cisco Unified CallManager upgrade to fail. This utility does not correct the problem(s); you must perform the corrective action for the problem that the utility identifies.

Cisco strongly recommends that all servers in the cluster pass the validation before you upgrade any servers.

Contents

This document contains the following topics:

Related Documentation

Before You Begin

Understanding How the Utility Works

Installing the Utility

Running the Utility

Interpreting the Results

Obtaining the Log File

Conventions

Consider the following documentation conventions as you review this upgrade document.

Blue Text—To quickly navigate to a section or URL, click text that appears in blue.


Note Reader, take note. Notes contain helpful suggestions or references to material not covered in the publication.



Caution Reader, be careful. You may do something that could result in equipment damage or loss of data.


Timesaver Reader, this tip saves you time as you perform the procedure.


Related Documentation

Use the following documentation in conjunction with this document. Click the URLs in Table 1 to navigate to the appropriate documentation.

Table 1 Quick Reference for URLs 

Related Documentation and Software
URL and Additional Information

Operating system documentation and Virtual Network Computing (VNC) documentation

(not readme documentation)

http://www.cisco.com/univercd/cc/td/doc/product/voice/iptel_os/index.htm

Cisco Unified CallManager Compatibility Matrix

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/ccmcomp.htm

Cisco Unified CallManager documentation

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/index.htm

Cisco Unified Communications Applications Backup and Restore documentation

http://www.cisco.com/univercd/cc/td/doc/product/voice/backup/index.htm

Service releases and readme documentation

http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml

Note The operating system and SQL Server support patches post on the voice products operating system cryptographic software page. You can navigate to the site from the Cisco Unified CallManager software page.

Related Cisco IP telephony application documentation

http://www.cisco.com/univercd/cc/td/doc/product/voice/index.htm


Before You Begin

Before you run the utility, Cisco strongly recommends that you perform the following tasks.

Back up your Cisco Unified CallManager servers. To obtain the backup utility documentation, go to http://www.cisco.com/univercd/cc/td/doc/product/voice/backup/index.htm.

Review the "Understanding How the Utility Works" section.

Verify that your server login account has Administrative privileges to run the utility.

Understanding How the Utility Works

Before you perform an upgrade to a Cisco Unified CallManager version, download and run the latest version of Cisco Unified CallManager Upgrade Utility, a nonintrusive tool that detects the health of the servers in the Cisco Unified CallManager cluster without changing the state of the system.

To verify that the server meets the minimum requirement for the Cisco Unified CallManager version to which you are upgrading, refer to the Cisco Unified CallManager Compatibility Matrix. To obtain the most recent version of this document, go to

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/ccmcomp.htm


Caution Your server login account must have Administrative privileges to run the utility. You may log in to the server by using the Administrator username and password.

Before you begin the upgrade on the publisher database server, you must run the utility on all servers in the cluster. If any server fails the validation process, investigate and correct the problem(s) before you begin the upgrade on the publisher database server. After you correct the problem(s), run the utility again before you upgrade.

You can run the utility on only one server at a time.

Cisco strongly recommends that you run this utility during a scheduled, maintenance window.

The utility runs the validation modules that display in Table 2. The utility runs some validation modules only on publisher servers, some validation modules only on subscriber servers, and some modules on both publisher and subscriber servers. As soon as the utility identifies a problem with a module, the utility begins checking the next module. After the utility performs the entire validation process, review the validation list in the Summary window for modules that fail the validation or for modules that provide warnings.

Table 2 Validation Checks That the Utility Performs 

Module
Applicable Server
Additional Information
The utility performs the following validations for servers that are running Cisco CallManager Release 3.1 or 3.2.

Backup File Integrity Validation

This check occurs on the publisher database server only.

The Upgrade Utility verifies the following items:

The existence of the chosen MCS.sti file

If the file does not exist after you click Select, an error message displays.

The backup file size

The backup utility version that is used to create the file

If you do not want the utility to validate the backup file, click the Skip button; a dialog box prompts you to skip the backup file validation.

If you do not choose a backup file for the utility to validate, the utility assigns a Skipped status to the module.

OS Flag Files Validation

This check occurs on the publisher database and subscriber servers.

The utility verifies that the Stirnw.flg and Stisys.inf files exist.

Database Location Setting Validation

This check occurs on the publisher database and subscriber servers.

The utility performs a check of your Cisco Unified CallManager registry (specifically, dbconnection0) to verify that the registry points to the proper database.

Resource Validation

This check occurs on the publisher database and subscriber servers.

This utility verifies that the system has enough physical memory.

The utility performs the following validations for servers that are running Cisco CallManager Release 3.3, 4.0, 4.1, or 4.2

Software Version Validation

This check occurs on the publisher database and subscriber servers.

The utility validates the Cisco-provided operating system/related service releases and SQL Server/related service releases.

For information on minimum software requirements, refer to the Cisco Unified CallManager Compatibility Matrix. To obtain the most recent version of this document, see Table 1.

The Upgrade Utility checks only for software applications that this document lists. If you run other applications in the cluster or other applications on the servers, verify that compatibility exists between Cisco Unified CallManager and the application before you upgrade. Failing to do so may cause applications to not work as expected.

Database Location Setting Validation

This check occurs on the publisher database and subscriber servers.

The utility performs a check of your Cisco Unified CallManager registry (specifically, dbconnection0) to verify that the registry points to the proper database.

DC Directory HealthCheck Validation

This check occurs on the publisher database and subscriber servers.

The utility validates whether Cisco Unified CallManager is integrated with DC Directory. This utility validates the DC Directory connection and the DC Directory configuration containers.

Security Settings Validation

This check occurs on the publisher database and subscriber servers.

The utility validates the following policies and accounts:

Password policies, including Enforce Password History, Minimum Password Age, and Minimum Password Length

Verify that these policies are set to default.

Account lockout policies

Verify that these policies are set to default.

Local system accounts for all Administrator accounts

Verify that the local system accounts for all Administrator accounts are set to Never Expire.

Note The utility validates the settings of the publisher database server even when it is running on the subscriber server.

Cisco Unified CallManager Database Replication Validation

This check occurs on the publisher database server.

The publisher database server upgrade requires that all call-processing processes that the server handles fail over to the configured subscriber servers. Database replication must exist prior to the upgrade, so failover occurs.

This utility verifies the database replication status for all subscriber servers in the cluster. This utility validates that the database contains the latest information about the system. Validation results include Running, Idle, Failed, or Succeeded.

Hostname Resolution Validation

This check occurs on the subscriber database server only.

The utility validates that the server hostname resolves to a valid IP address.

Password Validation

This check occurs on the subscriber database server only

The utility performs a check on each subscriber database server to verify that the Administrator password on the subscriber database servers matches the Administrator password on the publisher database server.

Domain Validation

This check occurs on the publisher database and subscriber servers.

The utility verifies that the system is not part of a domain.

Resource Validation

This check occurs on the publisher database and subscriber servers.

This utility verifies that the system has enough physical memory.


Installing the Utility


Caution If you choose to do so, you can use Virtual Network Computing (VNC) to install and run this utility. To obtain the most recent version of this document, go to http://www.cisco.com/univercd/cc/td/doc/product/voice/iptel_os/index.htm.

Do not use Integrated Lights Out (ILO) or Terminal Services to install or run this utility; Cisco installs Terminal Services, so Cisco Technical Assistance Center (TAC) can perform remote management and configuration tasks.

Perform the following procedure to install the utility:

Procedure


Step 1 Click http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml.

Step 2 Click CallManager Utilities.

Step 3 Download the Upgrade Utility file to your hard drive.


Tip For this utility, Cisco uses the file format, CCMUpgdAsstInstall_<utility version>.exe.


Step 4 Remember the location where you save the downloaded file.

Step 5 To begin the installation, double-click the download file.


Note If Cisco Security Agent (CSA) is enabled, a prompt asks you if you are installing software. To continue the installation, click Yes to All.


The Preparing to Install window displays.

Step 6 The Welcome window displays; click Next.

The license agreement displays.

Step 7 Review the license agreement, click the I accept the terms in the license agreement radio button to accept the terms, and click Next to proceed with the installation.

Step 8 Verify the customer information. Click Next.

The Ready to Install window displays. Click Install.

Step 9 When the InstallShield Wizard Complete window displays, click Finish.


Running the Utility


Tip You can run the utility on only one server at a time.

Running this utility takes approximately 1 to 60 (or more) minutes for the publisher database server. The time that it takes on the publisher database server depends on the size of the backup file.

The utility takes approximately 1 to 5 minutes for each subscriber server.


To run the utility, perform the following procedure.

Procedure


Step 1 Choose Start > Programs > Cisco Systems, Inc > CallManager Upgrade Utility.

Step 2 The Welcome window displays. Review the information in the window and click Next.

Step 3 The Choose a Cisco Unified CallManager Version displays. Choose the Cisco Unified CallManager version to which you are interested in upgrading and click Next.

Step 4 The Upgrade Utility Confirmation window displays with a list of checks that the utility performs. Review the information in the window and click Next.

During the validation process, the Cisco Unified CallManager Upgrade Utility Status windows displays. An "x" indicates that the validation failed; a check indicates that the validation succeeded; an arrow indicates the validation task that the utility currently performs.

Step 5 In the Upgrade Utility Summary window, the validation results display. To interpret the results, see the "Interpreting the Results" section.


Caution Clicking Finish closes the window. Review the results before you click Finish. If you close the window, you can obtain the results from the log file; see the "Obtaining the Log File" section.

Step 6 After you fix the problems that the utility identifies, run the utility again on every server in the cluster before you begin the upgrade.


Interpreting the Results

The validation results display in the Upgrade Utility Summary window. At the top of the window, a report summarizes the results for all modules and displays which modules failed, which modules produced warnings, and which modules passed. A link to the folder that contains all log files, including the Upgrade Utility Summary report, displays also.

To identify a problem with the failed validation module, review the following information that displays in the Summary window:

The first link points to the log file that specifies the error or warning.

Click the first link and search for the error or warning; for example, ERR: <message> or WARN: <message>.

The second link points to the corrective action file that describes the log file error message and recommends the corrective action.

To open the corrective action file, click the second link. Search the corrective action file for the error message that is noted in the log file. Review the description and corrective action.


Caution After you correct all problems that the utility identifies, Cisco strongly recommends that you run the utility again on every server in the cluster before you begin the upgrade.

Obtaining the Log File

You can obtain the results from the utility in the following directory:

C:\Program Files\Common Files\Cisco\Logs\UPGRADEASST<date> (for example, UPGRADEASST-05-15-2003_13.47.58)

To access the log file, click the Summary file.


Tip A link to the log file displays in the Summary window for every failed validation module. To access the log file, click the link in the Summary window.

The Summary.html file, which is the Upgrade Utility Summary report, provides the exact same information that displays in the Upgrade Utility Summary window.

Each time that you run the utility, the utility creates a new log folder and new set of log files. The utility does not remove the log files, even if you uninstall the utility. You erase the log files when you reimage the server or manually delete the files.


Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.

Cisco.com

You can access the most current Cisco documentation at this URL:

http://www.cisco.com/techsupport

You can access the Cisco website at this URL:

http://www.cisco.com

You can access international Cisco websites at this URL:

http://www.cisco.com/public/countries_languages.shtml

Product Documentation DVD

The Product Documentation DVD is a comprehensive library of technical product documentation on a portable medium. The DVD enables you to access multiple versions of installation, configuration, and command guides for Cisco hardware and software products. With the DVD, you have access to the same HTML documentation that is found on the Cisco website without being connected to the Internet. Certain products also have .PDF versions of the documentation available.

The Product Documentation DVD is available as a single unit or as a subscription. Registered Cisco.com users (Cisco direct customers) can order a Product Documentation DVD (product number DOC-DOCDVD= or DOC-DOCDVD=SUB) from Cisco Marketplace at this URL:

http://www.cisco.com/go/marketplace/

Ordering Documentation

Registered Cisco.com users may order Cisco documentation at the Product Documentation Store in the Cisco Marketplace at this URL:

http://www.cisco.com/go/marketplace/

Nonregistered Cisco.com users can order technical documentation from 8:00 a.m. to 5:00 p.m. (0800 to 1700) PDT by calling 1 866 463-3487 in the United States and Canada, or elsewhere by calling 011 408 519-5055. You can also order documentation by e-mail at tech-doc-store-mkpl@external.cisco.com or by fax at 1 408 519-5001 in the United States and Canada, or elsewhere at 011 408 519-5001.

Documentation Feedback

You can rate and provide feedback about Cisco technical documents by completing the online feedback form that appears with the technical documents on Cisco.com.

You can submit comments about Cisco documentation by using the response card (if present) behind the front cover of your document or by writing to the following address:

Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Cisco Product Security Overview

Cisco provides a free online Security Vulnerability Policy portal at this URL:

http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html

From this site, you will find information about how to:

Report security vulnerabilities in Cisco products.

Obtain assistance with security incidents that involve Cisco products.

Register to receive security information from Cisco.

A current list of security advisories, security notices, and security responses for Cisco products is available at this URL:

http://www.cisco.com/go/psirt

To see security advisories, security notices, and security responses as they are updated in real time, you can subscribe to the Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed. Information about how to subscribe to the PSIRT RSS feed is found at this URL:

http://www.cisco.com/en/US/products/products_psirt_rss_feed.html

Reporting Security Problems in Cisco Products

Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you have identified a vulnerability in a Cisco product, contact PSIRT:

For Emergencies only — security-alert@cisco.com

An emergency is either a condition in which a system is under active attack or a condition for which a severe and urgent security vulnerability should be reported. All other conditions are considered nonemergencies.

For Nonemergencies — psirt@cisco.com

In an emergency, you can also reach PSIRT by telephone:

1 877 228-7302

1 408 525-6532


Tip We encourage you to use Pretty Good Privacy (PGP) or a compatible product (for example, GnuPG) to encrypt any sensitive information that you send to Cisco. PSIRT can work with information that has been encrypted with PGP versions 2.x through 9.x.

Never use a revoked or an expired encryption key. The correct public key to use in your correspondence with PSIRT is the one linked in the Contact Summary section of the Security Vulnerability Policy page at this URL:

http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html

The link on this page has the current PGP key ID in use.

If you do not have or use PGP, contact PSIRT at the aforementioned e-mail addresses or phone numbers before sending any sensitive material to find other means of encrypting the data.


Obtaining Technical Assistance

Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The Cisco Technical Support & Documentation website on Cisco.com features extensive online support resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller.

Cisco Technical Support & Documentation Website

The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, at this URL:

http://www.cisco.com/techsupport

Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:

http://tools.cisco.com/RPF/register/register.do


Note Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting a web or phone request for service. You can access the CPI tool from the Cisco Technical Support & Documentation website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts & RMAs. The CPI tool offers three search options: by product ID or model name; by tree view; or for certain products, by copying and pasting show command output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call.


Submitting a Service Request

Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL:

http://www.cisco.com/techsupport/servicerequest

For S1 or S2 service requests, or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.

To open a service request by telephone, use one of the following numbers:

Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447

For a complete list of Cisco TAC contacts, go to this URL:

http://www.cisco.com/techsupport/contacts

Definitions of Service Request Severity

To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.

Severity 1 (S1)—An existing network is down, or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.

Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operations are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.

Severity 3 (S3)—Operational performance of the network is impaired, while most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.

Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.

Obtaining Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

The Cisco Product Quick Reference Guide is a handy, compact reference tool that includes brief product overviews, key features, sample part numbers, and abbreviated technical specifications for many Cisco products that are sold through channel partners. It is updated twice a year and includes the latest Cisco offerings. To order and find out more about the Cisco Product Quick Reference Guide, go to this URL:

http://www.cisco.com/go/guide

Cisco Marketplace provides a variety of Cisco books, reference guides, documentation, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL:

http://www.cisco.com/go/marketplace/

Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:

http://www.ciscopress.com

Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL:

http://www.cisco.com/packet

iQ Magazine is the quarterly publication from Cisco Systems designed to help growing companies learn how they can use technology to increase revenue, streamline their business, and expand services. The publication identifies the challenges facing these companies and the technologies to help solve them, using real-world case studies and business strategies to help readers make sound technology investment decisions. You can access iQ Magazine at this URL:

http://www.cisco.com/go/iqmagazine

or view the digital edition at this URL:

http://ciscoiq.texterity.com/ciscoiq/sample/

Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:

http://www.cisco.com/ipj

Networking products offered by Cisco Systems, as well as customer support services, can be obtained at this URL:

http://www.cisco.com/en/US/products/index.html

Networking Professionals Connection is an interactive website for networking professionals to share questions, suggestions, and information about networking products and technologies with Cisco experts and other networking professionals. Join a discussion at this URL:

http://www.cisco.com/discuss/networking

World-class networking training is available from Cisco. You can view current offerings at this URL:

http://www.cisco.com/en/US/learning/index.html