Table Of Contents
Vendor-Specific Management Information Base
Vendor-Specific Management Information Base
Supported Servers in Cisco Unified CM Releases
Cisco Unified CM Release 8.5(1)
Inapplicable MIBs in Cisco Unified CM Release 8.5(1)
Cisco Unified CM Release 8.0(2)
Inapplicable MIBs in Cisco Unified CM Release 8.0(2)
Cisco Unified CM Release 8.0(1)
Inapplicable MIBs in Cisco Unified CM Release 8.0(1)
Cisco Unified CM Release 7.1(2)
Inapplicable MIBs in Cisco Unified CM Release 7.1(2)
Cisco Unified CM Release 7.1(1)
Inapplicable MIBs
Cisco Unified CM Release 7.0(1)
Unsupported Servers by MIB
Cisco Unified CM Release 6.1(3)
Unsupported Servers by MIB
Cisco Unified CM Release 6.1
Unsupported Servers by MIB
Cisco Unified CM Release 6.0
Unsupported Servers by MIB
IBM MIBs
IBM Status Messages
Hewlett Packard MIBs
HP Status Messages
Intel MIBs
Intel Status Messages
Vendor-Specific Management Information Base
This chapter describes the vendor-specific Management Information Base (MIB) text documents that Cisco Unified Communications Manager (Cisco Unified CM) supports and that are used with Simple Network Management Protocol (SNMP). The chapter contains the following sections:
•
Vendor-Specific Management Information Base
•Supported Servers in Cisco Unified CM Releases
•IBM MIBs
•Hewlett Packard MIBs
•Intel MIBs
Vendor-Specific Management Information Base
The MIBs described in this chapter exist on various Cisco Media Convergence Servers (MCS), depending on vendor and model number. To query these MIBS, you can use the standard MIB browsers provided by the vendor. Go to the following URLs:
•For HP, go to http://h18013.www1.hp.com/products/servers/management/hpsim/index.html to download HP SIM.
•For IBM, go to http://www-03.ibm.com/systems/management/director/index.html to download IBM Systems Director.
Supported Servers in Cisco Unified CM Releases
This section lists the supported server models and unsupported server models by MIB and by Cisco Unified CM Release. It contains the following subsections:
•Cisco Unified CM Release 8.5(1)
•Cisco Unified CM Release 8.0(2)
•Cisco Unified CM Release 8.0(1)
•Cisco Unified CM Release 7.1(2)
•Cisco Unified CM Release 7.1(1)
•Cisco Unified CM Release 7.0(1)
•Cisco Unified CM Release 6.1(3)
•Cisco Unified CM Release 6.1
•Cisco Unified CM Release 6.0
Cisco Unified CM Release 8.5(1)
Table 9-1 Servers Available in Cisco Unified CM Release 8.5(1)
Cisco Unified CM Release 8.5(1)
|
IBM Server Models
|
HP Server Models
|
Cisco Unified Computing System
|
•MCS-7816-I3-IPC1
|
•MCS-7816-H3-IPC1
|
•UCS B200 M1
|
•MCS-7816-I4-IPC1/CCX1
|
•MCS-7825-H2-IPC1
|
•UCS C210 M1
|
•MCS-7816-I5-IPC1/CCX1
|
•MCS-7825-H3-IPC1
|
—
|
•MCS-7825-I3-IPC1
|
•MCS-7825-H4-IPC1
|
—
|
•MCS-7825-I4-IPC1
|
•MCS-7828-H3-IPC1
|
—
|
•MCS-7825-I5-IPC1
|
•MCS-7835-H2-IPC1
|
—
|
•MCS-7828-I3-SS1
|
•MCS-7835-H2-IPC2
|
—
|
•MCS-7828-I4-SS1
|
•DL380G6 (Single E5504 CPU)
|
—
|
•MCS-7828-I5-SS1
|
•MCS-7845-H2-IPC1
|
—
|
•MCS-7835-I2-IPC1
|
•MCS-7845-H2-IPC2
|
—
|
•MCS-7835-I2-IPC2
|
•DL380G6 (Single E5540 CPU)
|
—
|
•MCS-7835-I3-IPC1
|
—
|
—
|
•MCS-7845-I2-IPC1
|
—
|
—
|
•MCS-7845-I2-IPC2
|
—
|
—
|
•MCS-7845-I3-IPC1
|
—
|
—
|
Inapplicable MIBs in Cisco Unified CM Release 8.5(1)
IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:
•MCS-7815-I2-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1/CCX1
•MCS-7816-I5-IPC1/CCX1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7825-I4-IPC1
•MCS-7825-I5-IPC1
•MCS-7828-I3-SS1
•MCS-7828-I4-SS1
•MCS-7828-I5-SS1
IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:
•MCS-7815-I2-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1/CCX1
•MCS-7816-I5-IPC1/CCX1
•MCS-7825-I4-IPC1
•MCS-7825-I5-IPC1
•MCS-7828-I4-SS1
•MCS-7828-I5-SS1
•MCS-7835-I3-IPC1
•MCS-7845-I3-IPC1
IBM-SYSTEM-STORAGE-MIB does not apply to the following IBM server models:
•MCS-7815-I2-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1/CCX1
•MCS-7816-I5-IPC1/CCX1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7828-I3-SS1
•MCS-7835-I2-IPC1
•MCS-7835-I2-IPC2
•MCS-7845-I2-IPC1
•MCS-7845-I2-IPC2
HP CPQSCSI MIB does not apply to the following HP server model:
•MCS-7816-H3-IPC1
•MCS-7825-H2-IPC1
•MCS-7825-H3-IPC1
•MCS-7825-H4-IPC1
•MCS-7828-H3-IPC1
•MCS-7835-H2-IPC1
•MCS-7835-H2-IPC2
•DL380G6 (Single E5504 CPU)
•MCS-7845-H2-IPC1
•MCS-7845-H2-IPC2
•DL380G6 (Single E5540 CPU)
Cisco Unified CM Release 8.0(2)
Table 9-2 Servers Available in Cisco Unified CM Release 8.0(2)
Cisco Unified CM Release 8.0(2)
|
IBM Server Models
|
HP Server Models
|
Cisco Unified Computing System
|
•MCS-7815-I2-IPC1
|
•MCS-7816-H3-IPC1
|
•UCS B200 M1
|
•MCS-7816-I3-IPC1
|
•MCS-7825-H2-IPC1
|
—
|
•MCS-7816-I4-IPC1/CCX1
|
•MCS-7825-H3-IPC1
|
—
|
•MCS-7825-I2-IPC1
|
•MCS-7825-H4-IPC1
|
—
|
•MCS-7825-I3-IPC1
|
•MCS-7828-H3-IPC1
|
—
|
•MCS-7825-I4-IPC1
|
•MCS-7835-H2-IPC1
|
—
|
•MCS-7828-I3-SS1
|
•MCS-7835-H2-IPC2
|
—
|
•MCS-7828-I4-SS1
|
•DL380G6 (Single E5504 CPU)
|
—
|
•MCS-7835-I2-IPC1
|
•MCS-7845-H2-IPC1
|
—
|
•MCS-7835-I2-IPC2
|
•MCS-7845-H2-IPC2
|
—
|
•MCS-7835-I3-IPC1
|
•DL380G6 (Single E5540 CPU)
|
—
|
•MCS-7845-I2-IPC1
|
—
|
—
|
•MCS-7845-I2-IPC2
|
—
|
—
|
•MCS-7845-I3-IPC1
|
—
|
—
|
Inapplicable MIBs in Cisco Unified CM Release 8.0(2)
IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:
•MCS-7815-I2-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1/CCX1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7825-I4-IPC1
•MCS-7828-I3-SS1
•MCS-7828-I4-SS1
IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:
•MCS-7815-I2-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1/CCX1
•MCS-7825-I4-IPC1
•MCS-7828-I4-SS1
•MCS-7835-I3-IPC1
•MCS-7845-I3-IPC1
IBM-SYSTEM-STORAGE-MIB does not apply to the following IBM server models:
•MCS-7815-I2-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1/CCX1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7828-I3-SS1
•MCS-7835-I2-IPC1
•MCS-7835-I2-IPC2
•MCS-7845-I2-IPC1
•MCS-7845-I2-IPC2
HP CPQSCSI MIB does not apply to the following HP server model:
•MCS-7816-H3-IPC1
•MCS-7825-H2-IPC1
•MCS-7825-H3-IPC1
•MCS-7825-H4-IPC1
•MCS-7828-H3-IPC1
•MCS-7835-H2-IPC1
•MCS-7835-H2-IPC2
•DL380G6 (Single E5504 CPU)
•MCS-7845-H2-IPC1
•MCS-7845-H2-IPC2
•DL380G6 (Single E5540 CPU)
Cisco Unified CM Release 8.0(1)
Table 9-3 Servers Available in Cisco Unified CM Release 8.0(1)
Cisco Unified CM Release 8.0(1)
|
IBM Server Models
|
HP Server Models
|
•MCS-7815-I2-IPC11
|
•MCS-7816-H3-IPC11
|
•MCS-7816-I3-IPC11
|
•MCS-7825-H2-IPC11
|
•MCS-7816-I4-IPC11
|
•MCS-7825-H2-IPC21
|
•MCS-7825-I2-IPC11
|
•MCS-7825-H3-IPC11
|
•MCS-7825-I2-IPC21
|
•MCS-7825-H4-IPC11
|
•MCS-7825-I3-IPC11
|
•MCS-7828-H3
|
•MCS-7825-I4-IPC11
|
•MCS-7835-H2-IPC11
|
•MCS-7828-I3
|
•MCS-7835-H2-IPC21
|
•MCS-7828-I4
|
•MCS-7845-H2-IPC11
|
•MCS-7835-I2-IPC11
|
•MCS-7845-H2-IPC21
|
•MCS-7835-I2-IPC21
|
—
|
•MCS-7835-I3-IPC12
|
—
|
•MCS-7845-I2-IPC11
|
—
|
•MCS-7845-I2-IPC21
|
—
|
•MCS-7845-I3-IPC12
|
—
|
Note For information about the product end-of-life notices, go to http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_eol_notices_list.html
Inapplicable MIBs in Cisco Unified CM Release 8.0(1)
IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1
•MCS-7825I-3.0-IPC1
•MCS-7825-I1-IPC1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7825-I4-IPC1
•MCS-7828-I3-IPC1
IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1
•MCS-7825-I4-IPC1
•MCS-7828-I4-IPC1
IBM-SYSTEM-STORAGE-MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1
•MCS-7825I-3.0-IPC1
•MCS-7825-I1-IPC1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7828-I3-IPC1
•MCS-7835I-3.0-IPC1
•MCS-7835-I1-IPC1
•MCS-7835-I2-IPC1
•MCS-7835-I2-IPC2
•MCS-7845I-3.0-IPC1
•MCS-7845-I1-IPC1
•MCS-7845-I2-IPC1
•MCS-7845-I2-IPC2
HP CPQSCSI MIB does not apply to the following HP server model:
•MCS-7816-H4-IPC1
•MCS-7825H-3.0-IPC1
•MCS-7825-H1-IPC1
•MCS-7825-H2-IPC1
•MCS-7825-H3-IPC1
•MCS-7825-H4-IPC1
•MCS-7828-H3-IPC1
•MCS-7835H-3.0-IPC1
•MCS-7835-H1-IPC1
•MCS-7835-H2-IPC1
•MCS-7835-H2-IPC2
•MCS-7845H-3.0-IPC1
•MCS-7845-H1-IPC1
•MCS-7845-H2-IPC1
•MCS-7845-H2-IPC2
HP CPQSM2 MIB does not apply to the following HP server model:
•MCS-7825H-3.0-IPC1
Cisco Unified CM Release 7.1(2)
Table 9-4 Servers Available in Cisco Unified CM Release 7.1(2)
Cisco Unified CM Release 7.1(2)
|
IBM Server Models
|
HP Server Models
|
•MCS-7815-I1-IPC1
|
•MCS-7816-H3-IPC1
|
•MCS-7815-I2-IPC1
|
•MCS-7816-H4-IPC1/CCX1
|
•MCS-7815-I3-IPC1
|
•MCS-7825H-3.0-IPC1
|
•MCS-7816-I3-IPC1
|
•MCS-7825-H1-IPC1
|
•MCS-7816-I4-IPC1/CCX1
|
•MCS-7825-H2-IPC1
|
•MCS-7825I-3.0-IPC1
|
•MCS-7825-H3-IPC1
|
•MCS-7825-I1-IPC1
|
•MCS-7825-H4-IPC1/CCE1/
CCX1/ECS1/RC1
|
•MCS-7825-I2-IPC1
|
•MCS-7828-H3-IPC1
|
•MCS-7825-I3-IPC1
|
•MCS-7835H-3.0-IPC1
|
•MCS-7825-I4-IPC1/CCE1/
CCX1/ECS1/RC1
|
•MCS-7835-H1-IPC1
|
•MCS-7828-I3-IPC1
|
•MCS-7835-H2-IPC1
|
•MCS-7835I-3.0-IPC1
|
•MCS-7835-H2-IPC2/CCE2/
CCX2/RC2/ECS2
|
•MCS-7835-I1-IPC1
|
•MCS-7845H-3.0-IPC1
|
•MCS-7835-I2-IPC1
|
•MCS-7845-H1-IPC1
|
•MCS-7835-I2-IPC2/CCE2/
CCX2/RC2/ECS2
|
•MCS-7845-H2-IPC1
|
•MCS-7845I-3.0-IPC1
|
•MCS-7845-H2-IPC2/CCE2/
CCX2/RC2/ECS
|
•MCS-7845-I1-IPC1
|
—
|
•MCS-7845-I2-IPC1
|
—
|
•MCS-7845-I2-IPC2/CCE2/
CCX2/RC2/ECS2
|
—
|
Inapplicable MIBs in Cisco Unified CM Release 7.1(2)
IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1/CCX1
•MCS-7825I-3.0-IPC1
•MCS-7825-I1-IPC1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7825-I4-IPC1/CCE1/CCX1/ECS1/RC1
•MCS-7828-I3-IPC1
IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1/CCX1
HP CPQSM2 MIB does not apply to the following HP server model:
•MCS-7825H-3.0-IPC1
Cisco Unified CM Release 7.1(1)
Table 9-5 Servers Available in Cisco Unified CM Release 7.1(1)
Cisco Unified CM Release 7.1(1)
|
IBM Server Models
|
HP Server Models
|
•MCS-7815-I1-IPC1
|
•MCS-7816-H3-IPC1
|
•MCS-7815-I2-IPC1
|
•MCS-7816-H4-IPC1/CCX1
|
•MCS-7815-I3-IPC1
|
•MCS-7825H-3.0-IPC1
|
•MCS-7816-I3-IPC1
|
•MCS-7825-H1-IPC1
|
•MCS-7816-I4-IPC1/CCX1
|
•MCS-7825-H2-IPC1
|
•MCS-7825I-3.0-IPC1
|
•MCS-7825-H3-IPC1
|
•MCS-7825-I1-IPC1
|
•MCS-7825-H4-IPC1/CCE1/CCX1/ECS1/RC1
|
•MCS-7825-I2-IPC1
|
•MCS-7828-H3-IPC1
|
•MCS-7825-I3-IPC1
|
•MCS-7835H-3.0-IPC1
|
•MCS-7825-I4-IPC1/CCE1/CCX1/ECS1/RC1
|
•MCS-7835-H1-IPC1
|
•MCS-7828-I3-IPC1
|
•MCS-7835-H2-IPC1
|
•MCS-7835I-3.0-IPC1
|
•MCS-7835-H2-IPC2/CCE2/CCX2/RC2/ECS2
|
•MCS-7835-I1-IPC1
|
•MCS-7845H-3.0-IPC1
|
•MCS-7835-I2-IPC1
|
•MCS-7845-H1-IPC1
|
•MCS-7835-I2-IPC2/CCE2/CCX2/RC2/ECS2
|
•MCS-7845-H2-IPC1
|
•MCS-7845I-3.0-IPC1
|
•MCS-7845-H2-IPC2/CCE2/CCX2/RC2/ECS2
|
•MCS-7845-I1-IPC1
|
—
|
•MCS-7845-I2-IPC1
|
—
|
•MCS-7845-I2-IPC2/CCE2/
CCX2/RC2/ECS2
|
—
|
Inapplicable MIBs
IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1/CCX1
•MCS-7825I-3.0-IPC1
•MCS-7825-I1-IPC1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7825-I4-IPC1/CCE1/CCX1/ECS1/RC1
•MCS-7828-I3-IPC1
IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
•MCS-7816-I4-IPC1/CCX1
HP CPQSM2 MIB does not apply to the following HP server model:
•MCS-7825H-3.0-IPC1
Cisco Unified CM Release 7.0(1)
Table 9-6 Servers Available in Cisco Unified CM Release 7.0(1)
Cisco Unified CM Release 7.0(1)
|
IBM Server Models
|
HP Server Models
|
•MCS-7815-I1-IPC1
|
•MCS-7816-H3-IPC1
|
•MCS-7815-I2-IPC1
|
•MCS-7825H-3.0-IPC1
|
•MCS-7815-I3-IPC1
|
•MCS-7825-H1-IPC1
|
•MCS-7816-I3-IPC1
|
•MCS-7825-H2-IPC1
|
•MCS-7825I-3.0-IPC1
|
•MCS-7825-H3-IPC1
|
•MCS-7825-I1-IPC1
|
•MCS-7828-H3-IPC1
|
•MCS-7825-I2-IPC1
|
•MCS-7835H-3.0-IPC1
|
•MCS-7825-I3-IPC1
|
•MCS-7835-H1-IPC1
|
•MCS-7828-I3-IPC1
|
•MCS-7835-H2-IPC1
|
•MCS-7835I-3.0-IPC1
|
•MCS-7845H-3.0-IPC1
|
•MCS-7835-I1-IPC1
|
•MCS-7845-H1-IPC1
|
•MCS-7835-I2-IPC1/IPC2
|
•MCS-7845-H2-IPC1
|
•MCS-7845I-3.0-IPC1
|
—
|
•MCS-7845-I1-IPC1
|
—
|
•MCS-7845-I2-IPC1/IPC2
|
—
|
•MCS-7815-I1-IPC1
|
—
|
Note IBM Model MCS-7835I-2.4-EVV1 is discontinued in this release.
Note HP MCS-7825H-2.2-EVV1, MCS-7835H-2.4-EVV1, and MCS-7845H-2.4-EVV1 are discontinued in this release.
Unsupported Servers by MIB
IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
•MCS-7825I-3.0-IPC1
•MCS-7825-I1-IPC1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7828-I3-IPC1
IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
HP CPQSM2 MIB does not apply to the following HP server model:
•MCS-7825H-3.0-IPC1
Cisco Unified CM Release 6.1(3)
Table 9-7 Servers Available in Cisco Unified CM Release 6.1(3)
Cisco Unified CM Release 6.1(3)
|
IBM Server Models
|
HP Server Models
|
•MCS-7815-I1-IPC1
|
•MCS-7816-H3-IPC1
|
•MCS-7815-I2-IPC1
|
•MCS-7825H-2.2-EVV1
|
•MCS-7815-I3-IPC1
|
•MCS-7825H-3.0-IPC1
|
•MCS-7816-I3-IPC1
|
•MCS-7825-H1-IPC1
|
•MCS-7825I-3.0-IPC1
|
•MCS-7825-H2-IPC1
|
•MCS-7825-I1-IPC1
|
•MCS-7825-H3-IPC1
|
•MCS-7825-I2-IPC1
|
•MCS-7828-H3-IPC1
|
•MCS-7825-I3-IPC1
|
•MCS-7828-H4-BE
|
•MCS-7828-I3-IPC1
|
•MCS-7835H-2.4-EVV1
|
•MCS-7828-I4-BE
|
•MCS-7835H-3.0-IPC1
|
•MCS-7835I-2.4-EVV1
|
•MCS-7835-H1-IPC1
|
•MCS-7835I-3.0-IPC1
|
•MCS-7835-H2-IPC1
|
•MCS-7835-I1-IPC1
|
•MCS-7845H-2.4-EVV1
|
•MCS-7835-I2-IPC1/IPC2
|
•MCS-7845H-3.0-IPC1
|
•MCS-7845I-3.0-IPC1
|
•MCS-7845-H1-IPC1
|
•MCS-7845-I1-IPC1
|
•MCS-7845-H2-IPC1
|
•MCS-7845-I2-IPC1/IPC2
|
—
|
Unsupported Servers by MIB
IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
•MCS-7825I-3.0-IPC1
•MCS-7825-I1-IPC1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7828-I3-IPC1
•MCS-7828-I4-BE
IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
HP CPQSCSI MIB does not apply to the following HP server models:
•MCS-7816-H3-IPC1
•MCS-7825H-2.2-EVV1
•MCS-7825H-3.0-IPC1
•MCS-7825-H1-IPC1
•MCS-7825-H2-IPC1
•MCS-7825-H3-IPC1
•MCS-7828-H3-IPC1
•MCS-7828-H4-BE
•MCS-7835H-2.4-EVV1
•MCS-7835H-3.0-IPC1
•MCS-7835-H1-IPC1
•MCS-7835-H2-IPC1
•MCS-7845H-2.4-EVV1
•MCS-7845H-3.0-IPC1
•MCS-7845-H1-IPC1
•MCS-7845-H2-IPC1
HP CPQSM2 MIB does not apply to the following HP server models:
•MCS-7825H-2.2-EVV1
•MCS-7825H-3.0-IPC1
Cisco Unified CM Release 6.1
Table 9-8 Servers Available in Cisco Unified CM Release 6.1
Cisco Unified CM Release 6.1
|
IBM Server Models
|
HP Server Models
|
•MCS-7815-I1-IPC1
|
•MCS-7816-H3-IPC1
|
•MCS-7815-I2-IPC1
|
•MCS-7825H-2.2-EVV1
|
•MCS-7815-I3-IPC1
|
•MCS-7825H-3.0-IPC1
|
•MCS-7816-I3-IPC1
|
•MCS-7825-H1-IPC1
|
•MCS-7825I-3.0-IPC1
|
•MCS-7825-H2-IPC1
|
•MCS-7825-I1-IPC1
|
•MCS-7825-H3-IPC1
|
•MCS-7825-I2-IPC1
|
•MCS-7828-H3-IPC1
|
•MCS-7825-I3-IPC1
|
•MCS-7835H-2.4-EVV1
|
•MCS-7828-I3-IPC1
|
•MCS-7835H-3.0-IPC1
|
•MCS-7835I-2.4-EVV1
|
•MCS-7835-H1-IPC1
|
•MCS-7835I-3.0-IPC1
|
•MCS-7835-H2-IPC1
|
•MCS-7835-I1-IPC1
|
•MCS-7845H-2.4-EVV1
|
•MCS-7835-I2-IPC1/IPC2
|
•MCS-7845H-3.0-IPC1
|
•MCS-7845I-3.0-IPC1
|
•MCS-7845-H1-IPC1
|
•MCS-7845-I1-IPC1
|
•MCS-7845-H2-IPC1
|
•MCS-7845-I2-IPC1/IPC2
|
—
|
Unsupported Servers by MIB
IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
•MCS-7825I-3.0-IPC1
•MCS-7825-I1-IPC1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7828-I3-IPC1
IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7815-I3-IPC1
•MCS-7816-I3-IPC1
HP CPQSCSI MIB does not apply to the following HP server models:
•MCS-7816-H3-IPC1
•MCS-7825H-2.2-EVV1
•MCS-7825H-3.0-IPC1
•MCS-7825-H1-IPC1
•MCS-7825-H2-IPC1
•MCS-7825-H3-IPC1
•MCS-7828-H3-IPC1
•MCS-7828-H4-BE
•MCS-7835H-2.4-EVV1
•MCS-7835H-3.0-IPC1
•MCS-7835-H1-IPC1
•MCS-7835-H2-IPC1
•MCS-7845H-2.4-EVV1
•MCS-7845H-3.0-IPC1
•MCS-7845-H1-IPC1
•MCS-7845-H2-IPC1
HP CPQSM2 MIB does not apply to the following HP server models:
•MCS-7825H-2.2-EVV1
•MCS-7825H-3.0-IPC1
Cisco Unified CM Release 6.0
Table 9-9 Servers Available in Cisco Unified CM Release 6.0
Cisco Unified CM Release 6.0
|
IBM Server Models
|
HP Server Models
|
Dell Server Models
|
•MCS-7815-I1-IPC1
|
•MCS-7816-H3-IPC1
|
•PE2950
|
•MCS-7815-I2-IPC1
|
•MCS-7825H-2.2-EVV1
|
|
•MCS-7816-I3-IPC1
|
•MCS-7825H-3.0-IPC1
|
|
•MCS-7825I-3.0-IPC1
|
•MCS-7825-H1-IPC1
|
|
•MCS-7825-I1-IPC1
|
•MCS-7825-H2-IPC1
|
|
•MCS-7825-I2-IPC1
|
•MCS-7825-H3-IPC1
|
|
•MCS-7828-I3-IPC1
|
•MCS-7828-H3-IPC1
|
|
•MCS-7835I-2.4-EVV1
|
•MCS-7835H-2.4-EVV1
|
|
•MCS-7835I-3.0-IPC1
|
•MCS-7835H-3.0-IPC1
|
|
•MCS-7835-I1-IPC1
|
•MCS-7835-H1-IPC1
|
|
•MCS-7835-I2-IPC1
|
•MCS-7835-H2-IPC1
|
|
•MCS-7845I-3.0-IPC1
|
•MCS-7845H-2.4-EVV1
|
|
•MCS-7845-I1-IPC1
|
•MCS-7845H-3.0-IPC1
|
|
•MCS-7845-I2-IPC1
|
•MCS-7845-H1-IPC1
|
|
•MCS-7825-I3-IPC1
|
•MCS-7845-H2-IPC1
|
|
Unsupported Servers by MIB
IBM-SYSTEM-POWER (UMSPOWER) MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7816-I3-IPC1
•MCS-7825I-3.0-IPC1
•MCS-7825-I1-IPC1
•MCS-7825-I2-IPC1
•MCS-7825-I3-IPC1
•MCS-7828-I3-IPC1
IBM-SERVERAID MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7825I-3.0-IPC1
•MCS-7825-I1-IPC1
•MCS-7825-I2-IPC1
•MCS-7835-I2-IPC1
•MCS-7845-I2-IPC1
IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:
•MCS-7815-I1-IPC1
•MCS-7815-I2-IPC1
•MCS-7816-I3-IPC1
HP CPQSCSI MIB does not apply to the following HP server models:
•MCS-7816-H3-IPC1
•MCS-7825H-2.2-EVV1
•MCS-7825H-3.0-IPC1
•MCS-7825-H1-IPC1
•MCS-7825-H2-IPC1
•MCS-7825-H3-IPC1
•MCS-7828-H3-IPC1
•MCS-7835H-2.4-EVV1
•MCS-7835H-3.0-IPC1
•MCS-7835-H1-IPC1
•MCS-7835-H2-IPC1
•MCS-7845H-2.4-EVV1
•MCS-7845H-3.0-IPC1
•MCS-7845-H1-IPC1
•MCS-7845-H2-IPC1
HP CPQSM2 MIB does not apply to the following HP server models:
•MCS-7825H-2.2-EVV1
•MCS-7825H-3.0-IPC1
IBM MIBs
Table 9-10 IBM MIBs
MIB
|
OID
|
Function
|
Supported for browsing only
|
IBM-SYSTEM-HEALTH-MIB
|
1.3.6.1.4.1.2.6.159.1.1.30
|
Provides temperature, voltage, and fan status
|
IBM-SYSTEM-ASSETID-MIB
|
1.3.6.1.4.1.2.6.159.1.1.60
|
Provides hardware component asset data
|
IBM-SYSTEM-LMSENSOR-MIB
|
1.3.6.1.4.1.2.6.159.1.1.80
|
Provides temperature, voltage, and fan details
|
IBM-SYSTEM-NETWORK-MIB
|
1.3.6.1.4.1.2.6.159.1.1.110
|
Provides Network Interface Card (NIC) status
|
IBM-SYSTEM-MEMORY-MIB
|
1.3.6.1.4.1.2.6.159.1.1.120
|
Provides physical memory details
|
IBM-SYSTEM-POWER-MIB
|
1.3.6.1.4.1.2.6.159.1.1.130
|
Provides power supply details
|
IBM-SYSTEM-PROCESSOR-MIB
|
1.3.6.1.4.1.2.6.159.1.1.140
|
Provides CPU asset/status data
|
Supported for system traps
|
IBM-SYSTEM-TRAP
|
1.3.6.1.4.1.2.6.159.1.1.0
|
Provides temperature, voltage, fan, disk, NIC, memory, power supply, and CPU details
|
IBM-SERVERAID-MIB
|
1.3.6.1.4.1.2.6.167.2
|
Provides RAID status
|
IBM-SYSTEM-RAID-MIB
|
1.3.6.1.4.1.2.6.159.1.1.200.1
|
Provides RAID status
|
IBM-SYSTEM-STORAGE-MIB
|
1.3.6.1.4.1.2.6.159.3.1
|
Provides RAID status
|
IBM Status Messages
Table 9-11 IBM Hardware Status Messages, MIBs and Objects Names, and Object Responses
Cisco Unified CM Release 6.x
|
MCS-78xx Status
|
MIBS and Object Names
|
Object Responses
|
System Fan
|
IBM-SYSTEM-LMSENSOR-MIB::ibmSystem
TachometerStatus (also see ibmSystemTachometerKeyIndex)
|
This is a string indicating the current status of the object. Various operational and non-operational statuses can be defined.
Operational statuses are OK, Degraded and Pred Fail. Pred Fail indicates that an element may be functioning properly but predicting a failure in the near future. An example is a SMART-enabled hard drive.
|
| |
|
Non-operational statuses are Error, Starting, Stopping and Service. Service can apply during mirror-resilvering of a disk, reload of a user permissions list, or other administrative work.
|
| |
|
Not all such work is on-line, yet the managed element is neither OK nor in one of the other states.
OK = Normal; Error = Critical
|
Voltage Sensor
|
IBM-SYSTEM-LMSENSOR-MIB::ibmSystem
VoltageSensorStatus (also see ibmSystemVoltageSensorKeyIndex)
|
This is a string indicating the current status of the object. Various operational and non-operational statuses can be defined.
Operational statuses are OK, Degraded and Pred Fail. Pred Fail indicates that an element may be functioning properly but predicting a failure in the near future. An example is a SMART-enabled hard drive.
Non-operational statuses are Error, Starting, Stopping and Service. Service can apply during mirror-resilvering of a disk, reload of a user permissions list, or other administrative work. Not all such work is on-line, yet the managed element is neither OK nor in one of the other states.
OK = Normal; Error = Critical
|
Thermal
|
IBM-SYSTEM-LMSENSOR-MIB::ibmSystemTemperatureSensorStatus (also see ibmSystemTemperatureSensorKeyIndex)
|
The Status property is a string indicating the current status of the object. Various operational and non-operational statuses can be defined. Operational statuses are OK, Degraded and Pred Fail. Pred Fail indicates that an element may be functioning properly but predicting a failure in the near future. An example is a SMART-enabled hard drive. Non-operational statuses can also be specified. These are Error, Starting, Stopping and Service. The latter, Service, could apply during mirror-resilvering of a disk, reload of a user permissions list, or other administrative work. Not all such work is on-line, yet the managed element is neither OK nor in one of the other states. OK = Normal; Error = Critical
|
Network Interface Card
|
IBM-SYSTEM-NETWORK-MIB::ibmSystemLogicalNetworkAdapterStatus (also see ibmSystemLogicalNetworkAdapterKeyIndex)
|
The online status of the adapter.
|
Logical Drive
|
IBM-SYSTEM-TRAP-MIB::ibmSystemRaidLogicalDriveStatus (also see ibmSystemRaidLogicalDriveKeyIndex)
|
The status of the logical drive
|
Physical Drive
|
IBM-SYSTEM-TRAP-MIB::ibmSystemRaidDiskDriveStatus & ibmSystemRaidControllerStatus (also see ibmSystemRaidDiskDriveKeyIndex & ibmSystemRaidControllerKeyIndex)
|
|
Hewlett Packard MIBs
Table 9-12 HP MIBs
MIB
|
OID
|
Function
|
Supported for browsing and system traps
|
CPQSTDEQ-MIB
|
1.3.6.1.4.1.232.1
|
Provides hardware component configuration data
|
CPQSINFO-MIB
|
1.3.6.1.4.1.232.2
|
Provides hardware component asset data
|
CPQIDA-MIB
|
1.3.6.1.4.1.232.3
|
Provides RAID status/events
|
CPQHLTH-MIB
|
1.3.6.1.4.1.232.6
|
Provides hardware components status/events
|
CPQSTSYS-MIB
|
1.3.6.1.4.1.232.8
|
Provides storage (disk) systems status/events
|
CPQSM2-MIB
|
1.3.6.1.4.1.232.9
|
Provides iLO status/events
|
CPQTHRSH-MIB
|
1.3.6.1.4.1.232.10
|
Provides alarm threshold management
|
CPQHOST-MIB
|
1.3.6.1.4.1.232.11
|
Provides operating system information
|
CPQIDE-MIB
|
1.3.6.1.4.1.232.14
|
Provides IDE (CD-ROM) drive status/events
|
CPQNIC-MIB
|
1.3.6.1.4.1.232.18
|
Provides Network Interface Card (NIC) status/events
|
HP Status Messages
Table 9-13 lists status messages, MIBs and OIDs, MIB object names and clearing values, and object responses.
Table 9-13 HP Hardware Status Messages, MIBs and OIDs, MIB Object Names and Clearing Values, and
Object Responses
Cisco Unified CM Release 6.x
|
MCS-78xx Status
|
MIB and OID
|
MIB Object Name and Clearing Value
|
Object Response
|
Logical Drive1
|
CPQIDA-MIB
1.3.6.1.4.1.232.3.2.3.1.1.4
|
cpqDaLogDrvStatus
Clearing Value = 2
|
The logical drive can be in one of the following states:
•Ok (2) Indicates that the logical drive is in normal operation mode.
•Failed (3) Indicates that more physical drives have failed than the fault tolerance mode of the logical drive can handle without data loss.
•Unconfigured (4) Indicates that the logical drive is not configured.
•Recovering (5) Indicates that the logical drive is using Interim Recovery Mode. In Interim Recovery Mode, at least one physical drive has failed, but the logical drive's fault tolerance mode lets the drive continue to operate with no data loss.
|
| |
|
|
•Ready Rebuild (6) Indicates that the logical drive is ready for Automatic Data Recovery. The physical drive that failed has been replaced, but the logical drive is still operating in Interim Recovery Mode.
|
| |
|
|
•Rebuilding (7) Indicates that the logical drive is currently doing Automatic Data Recovery. During Automatic Data Recovery, fault tolerance algorithms restore data to the replacement drive.
•Wrong Drive (8) Indicates that the wrong physical drive was replaced after a physical drive failure.
•Bad Connect (9) Indicates that a physical drive is not responding.
|
Physical Drive1
|
CPQIDA-MIB
1.3.6.1.4.1.232.3.2.5.1.1.6
|
cpqDaPhyDrvStatus
Clearing Value = 2
|
•The following values are valid for the physical drive status:
•other (1) Indicates that the instrument agent does not recognize the drive. You may need to upgrade your instrument agent and/or driver software.
•ok (2) Indicates the drive is functioning properly.
•failed (3) Indicates that the drive is no longer operating and should be replaced.
•predictiveFailure(4) Indicates that the drive has a predictive failure error and should be replaced.
|
System Fan
|
CPQHLTH-MIB
1.3.6.1.4.1.232.6.2.6.4
|
cpqHeThermalSystem
FanStatus
Clearing Value = 2
|
This value will be one of the following:
•other(1) Fan status detection is not supported by this system or driver.
•ok(2) The fan is operating properly.
•degraded(2) A redundant fan is not operating properly.
•failed(4) A non-redundant fan is not operating properly.
|
CPU Fan
|
CPQHLTH-MIB
1.3.6.1.4.1.232.6.2.6.5
|
cpqHeThermalCpuFan
Status
Clearing Value = 2
|
This value will be one of the following:
•other(1) Fan status detection is not supported by this system or driver.
•ok(2) The fan is operating properly.
•degraded(2) A redundant fan is not operating properly.
•failed(4) A non-redundant fan is not operating properly.
|
Network Interface Card (NIC)
|
CPQNIC-MIB
1.3.6.1.4.1.232.18.2.3.1.1.13
|
cpqNicIfPhysAdapter
State
Clearing Value = 2 and 3
|
The following values are valid—
•unknown(1) The instrument agent was not able to determine the status of the adapter. The instrument agent may need to be upgraded.
•ok(2) The physical adapter is operating properly.
•generalFailure(3) The physical adapter has failed.
•linkFailure(4) The physical adapter has lost link. Check the cable connections to this adapter.
|
Thermal
|
CPQHLTH-MIB
1.3.6.1.4.1.232.6.2.6.1
|
cpqHeThermalCondition
Clearing Value = 2
|
This value will be one of the following:
•other(1) Temperature could not be determined.
•ok(2) The temperature sensor is within normal operating range.
•degraded(3) The temperature sensor is outside of normal operating range.
•failed(4) The temperature sensor detects a condition that could permanently damage the system.
Note The system automatically shuts down if the failed (4) condition occurs, so it is unlikely that 4 will ever be returned by the agent. If the cpqHeThermalDegradedAction is set to shut down (3), the system will shut down if the condition occurs.
|
Power Supply1
|
CPQHLTH-MIB
1.3.6.1.4.1.232.6.2.9.3.1.5
|
cpqHeFltTolPower
SupplyStatus
Clearing Value = 1
|
This value will be one of the following:
•other(1) The status could not be determined or not present.
•ok(2) The power supply is operating normally.
•degraded(3) A temperature sensor, fan or other power supply component is outside of normal operating range.
•failed(4) A power supply component detects a condition that could permanently damage the system.
|
NIC Errors
|
CPQNIC-MIB
1.3.6.1.4.1.232.18.2.3.1.1.16
|
cpqNicIfPhysAdapter
GoodTransmits
Clearing Value = <0.5% for 1 hour
|
Interface is experiencing excessive errors
|
| |
1.3.6.1.4.1.232.18.2.3.1.1.18
|
cpqNicIfPhysAdapter
BadTransmits
|
|
| |
1.3.6.1.4.1.232.18.2.3.1.1.17
|
cpqNicIfPhysAdapter
GoodReceives
|
|
| |
1.3.6.1.4.1.232.18.2.3.1.1.19
|
cpqNicIfPhysAdapter
BadReceives
|
|
NIC Utilization
|
CPQNIC-MIB
1.3.6.1.4.1.232.18.2.3.1.1.16
|
cpqNicIfPhysAdapter
GoodTransmits
Clearing Value = <50% for 1 hour
|
Interface is experiencing High Utilization
|
1.3.6.1.4.1.232.18.2.3.1.1.18
|
cpqNicIfPhysAdapter
BadTransmits
|
1.3.6.1.4.1.232.18.2.3.1.1.17
|
cpqNicIfPhysAdapter
GoodReceives
|
1.3.6.1.4.1.232.18.2.3.1.1.19
|
cpqNicIfPhysAdapter
BadReceives
|
Memory Module Trap
|
1.3.6.1.4.1.232.6.3
|
cpqHe4CorrMem
ReplaceMemModule
See CPQHOST-MIB for information on the following trap variables:
•sysName
•cpqHoTrapFlags
•cpqHeResMemBoardIndex
•cpqHeResMemModule
Index
•cpqHeResMemModule
SparePartNo
•cpqSiMemModuleSize
•cpqSiServerSystemId
Trap number is 6056 which replaces 6029.
|
A correctable memory log entry indicates a memory module needs to be replaced. The errors have been corrected, but the memory module should be replaced. The error information is reported in the variable cpqHeCorrMemErrDesc
|
78x5-H Insite Manager Service
|
HOST-RESOURCES-MIB
1.3.6.1.2.1.25.4.2.1.2
|
cmaeventd
|
Compaq Insite Manager Service Failure
|
| |
|
cmafcad
|
|
| |
|
cmahealthd
|
|
| |
|
cmahostd
|
|
| |
|
Positive String ID forcmaidad
|
|
| |
|
cmaided
|
|
| |
|
cmanicd
|
|
| |
|
cmapeerd
|
|
| |
|
cmaperfd
|
|
| |
|
cmasm2d
|
|
| |
|
cmastdeqd
|
|
| |
|
cmathreshd
|
|
Intel MIBs
Table 9-15 lists Intel MIBs, OID, and functions. See "Intel Status Messages" section for descriptions of messages.
Table 9-14 Intel MIBs
MIB
|
OID
|
Function
|
Supported for browsing and system traps
|
INTEL-SERVER-BASEBOARD6
|
1.3.6.1.4.1.343.2.10.3.6.200
|
Denotes the power group and describes voltage probes, status, and readings
|
1.3.6.1.4.1.343.2.10.3.6.300
|
Denotes the thermal group and describes cooling devices, fans, and temperature probes
|
1.3.6.1.4.1.343.2.10.3.6.10
|
Denotes the instances of cooling devices
|
1.3.6.1.4.1.343.2.10.3.6.20
|
Denotes the status, reading, and threshold for every cooling device and fan
|
1.3.6.1.4.1.343.2.10.3.6.30
|
Denotes the instances of temperature probes
|
1.3.6.1.4.1.343.2.10.3.6.40
|
Denotes the status, reading, thresholds for every temperature probe
|
1.3.6.1.4.1.343.2.10.3.6.1000
|
Denotes the events group and describes power, thermal, and system events
|
Intel Status Messages
Table 9-15 lists status messages, MIBs and OIDs, MIB object names and clearing values, and object responses.
Table 9-15 Intel Hardware Status Messages, MIBs and Objects Names, and Object Responses
Cisco Unified CM Release 7.x
|
MCS-78xx Status
|
MIBS and Object Names
|
Object Responses
|
Power
|
INTEL-SERVER-BASEBOARD6::powerEvents
|
|
System
|
INTEL-SERVER-BASEBOARD6::systemEvents
|
|
Thermal
|
INTEL-SERVER-BASEBOARD6::thermalEvents
|
|
Feedback
