Error Code
|
Description
|
ASSOCIATED_LINE_NOT_OPEN
|
This error indicates that the request is issued on a line, which is not open
|
CALL_ALREADY_EXISTS
|
This error indicates that another call already exists on the line
|
CALL_DROPPED
|
The call dropped after the feature request (hold, unhold, transfer, or conference) but before the request was completed.
|
CALLHANDLE_NOTINCOMINGCALL
|
This error indicates that an attempt is made to answer a call that either does not exist or is not in the correct state
|
CALLHANDLE_UNKNOWN_TO_LINECONTROL
|
This error indicates that attempt to redirect call that was unknown to line control
|
CANNOT_OPEN_DEVICE
|
This error indicates that device open failed because the associated device is unregistering
|
CANNOT_TERMINATE_MEDIA_ON_PHONE
|
This error indicates that media cannot be terminated by an application when the device is a physical phone (the phone always terminates the media)
|
CFWDALL_ALREADY_SET
|
This error indicates that attempt to set CFWALL while it is already set
|
CFWDALL_DESTN_INVALID
|
This error indicates that attempt to CFWALL to an invalid destination
|
CLUSTER_LINK_FAILURE
|
This error indicates that link to one of the cisco unified communications managers failed in the cluster (network error)
|
COMMAND_NOT_IMPLEMENTED_ON_DEVICE
|
This error indicates that device does not support the command.
|
CONFERENCE_ALREADY_PRESENT
|
This error indicates that attempt to conference a party that is already in conference
|
CONFERENCE_FAILED
|
This error indicates that conference completion was not successful.
|
CONFERENCE_FULL
|
This error indicates that all conference bridges are busy.
|
CONFERENCE_INACTIVE
|
This error indicates that attempt to complete conference while consult conference is not active
|
CONFERENCE_INVALID_PARTICIPANT
|
This error indicates that an attempt to conference to self or an invalid participant
|
CTIERR_ACCESS_TO_DEVICE_DENIED
|
This error indicates that the access to device is denied.
|
CTIERR_APP_SOFTKEYS_ALREADY_CONTROLLED
|
This error indicates that the application softkeys are already controlled by another application
|
CTIERR_APPLICATION_DATA_SIZE_EXCEEDED
|
This error indicates that application data size has exceeded limit
|
CTIERR_BIB_NOT_CONFIGURED
|
This error indicates built in bridge is not configured
|
CTIERR_BIB_RESOURCE_NOT_AVAILABLE
|
This error indicates that built in bridge resource not available
|
CTIERR_CALL_MANAGER_NOT_AVAILABLE
|
This error indicates that Communications Manager is not available currently
|
CTIERR_CALL_NOT_EXISTED
|
This error indicates that call does not exist
|
CTIERR_CALL_PARK_NO_DN
|
This error indicates no call park DN
|
CTIERR_CALL_REQUEST_ALREADY_OUTSTANDING
|
This error indicates call request already outstanding
|
CTIERR_CALL_UNPARK_FAILED
|
This error indicates that call unpark did not succeed
|
CTIERR_CAPABILITIES_DO_NOT_MATCH
|
This error indicates that capabilities do not match
|
CTIERR_CLOSE_DELAY_NOT_SUPPORTED_WITH_
REG_TYPE
|
This error indicates that the close delay is not supported with this registration type
|
CTIERR_CONFERENCE_ALREADY_EXISTED
|
This error indicates that conference already exists
|
CTIERR_CONFERENCE_NOT_EXISTED
|
This error indicates that conference does not exist
|
CTIERR_CONNECTION_ON_INVALID_PORT
|
This error indicates application is trying to connect to invalid port
|
CTIERR_CONSULT_CALL_FAILURE
|
This error indicates consult call failure
|
CTIERR_CONSULTCALL_ALREADY_OUTSTANDING
|
This error indicates that consult call already outstanding
|
CTIERR_CRYPTO_CAPABILITY_MISMATCH
|
This error indicates that device registration failed as device crypto algorithms does not match with current device registration
|
CTIERR_CTIHANDLER_PROCESS_CREATION_FAILED
|
This error indicates that CTIHandler process creation failed
|
CTIERR_DB_INITIALIZATION_ERROR
|
This error indicates DB initialization error
|
CTIERR_DEVICE_ALREADY_OPENED
|
This error indicates that device is already opened
|
CTIERR_DEVICE_NOT_OPENED_YET
|
This error indicates that device is not yet opened
|
CTIERR_DEVICE_OWNER_ALIVE_TIMER_STARTED
|
This error indicates that there is a device registration failure
|
CTIERR_DEVICE_REGISTRATION_FAILED_NOT_
SUPPORTED_MEDIATYPE
|
This error indicates an invalid media type, CTIPort need to be registered with Dynamic media port registation if it has an intercom line
|
CTIERR_DEVICE_RESTRICTED
|
This error indicates that the device is restricted
|
CTIERR_DEVICE_SHUTTING_DOWN
|
This error indicates that device is shutting down
|
CTIERR_DIRECTORY_LOGIN_TIMEOUT
|
This error indicates that there is a directory login time out
|
CTIERR_DUPLICATE_CALL_REFERENCE
|
This error indicates duplicate call reference
|
CTIERR_DYNREG_IPADDRMODE_MISMATCH
|
This indicates registration failure when Cisco Media/Route Tterminal is already registered with different Addressing mode
|
CTIERR_FAC_CMC_REASON_CMC_INVALID
|
Client Matter Code (CMC) entered is invalid
|
CTIERR_FAC_CMC_REASON_CMC_NEEDED
|
CMC is required to offer the call
|
CTIERR_FAC_CMC_REASON_FAC_CMC_NEEDED
|
Forced Authorization Code (FAC) and CMC are required to offer call
|
CTIERR_FAC_CMC_REASON_FAC_INVALID
|
FAC entered is invalid
|
CTIERR_FAC_CMC_REASON_FAC_NEEDED
|
FAC is required to offer the call
|
CTIERR_FEATURE_ALREADY_REGISTERED
|
This error indicates feature already registered
|
CTIERR_FEATURE_DATA_REJECT
|
This error indicates feature data reject
|
CTIERR_FEATURE_SELECT_FAILED
|
This error indicates that feature select failed
|
CTIERR_ILLEGAL_DEVICE_TYPE
|
This error indicates that the device type is illegal
|
CTIERR_INCOMPATIBLE_AUTOINSTALL_PROTOCOL_
VERSION
|
This error indicates that auto install protocol version is incompatible
|
CTIERR_INCORRECT_MEDIA_CAPABILITY
|
Device registration failed due to incorrect media capability
|
CTIERR_INFORMATION_NOT_AVAILABLE
|
This error indicates that information is not available
|
CTIERR_INTERCOM_SPEEDDIAL_ALREADY_CONFIGURED
|
This error indicates that intercom target value is already configured, application is trying to make call with Intercom target DN
|
CTIERR_INTERCOM_SPEEDDIAL_ALREADY_SET
|
This error indicates that intercom request failed as intercom target value is already set, application is trying to set again
|
CTIERR_INTERCOM_SPEEDDIAL_DESTN_INVALID
|
This error indicates that intercomm request failed as intercom target value in not in the intercom group
|
CTIERR_INTERCOM_TALKBACK_ALREADY_PENDING
|
This error indicates that intercom talk back request is already pending
|
CTIERR_INTERCOM_TALKBACK_FAILURE
|
This error indicates that talkback request failed for some reason
|
CTIERR_INTERNAL_FAILURE
|
This error indicates there is a CTI internal failure
|
CTIERR_INVALID_CALLID
|
This error indicates the call ID is invalid
|
CTIERR_INVALID_DEVICE_NAME
|
This error indicates that the device name is not valid
|
CTIERR_INVALID_DTMFDIGITS
|
Play DTMF request failed because it is an invalid DTMF digit
|
CTIERR_INVALID_FILTER_SIZE
|
This error indicates that filter size is invalid
|
CTIERR_INVALID_MEDIA_DEVICE
|
This error indicates that the media device is not valid
|
CTIERR_INVALID_MEDIA_PARAMETER
|
This error indicates media parameter is invalid
|
CTIERR_INVALID_MEDIA_PROCESS
|
This error indicates that there is an invalid media process
|
CTIERR_INVALID_MEDIA_RESOURCE_ID
|
This error indicates media resource ID is not valid
|
CTIERR_INVALID_MESSAGE_HEADER_INFO
|
This error indicates that the header info is not valid
|
CTIERR_INVALID_MESSAGE_LENGTH
|
This error indicates that message length is invalid
|
CTIERR_INVALID_MONITOR_DESTN
|
This error indicates monitoring request failed due to invalid monitoring destination
|
CTIERR_INVALID_MONITOR_DN_TYPE
|
This error indicates an invalid monitor DN type
|
CTIERR_INVALID_MONITORMODE
|
This error indicates monitor request failed due to an invalid monitor mode
|
CTIERR_INVALID_PARAMETER
|
This error indicates that the parameter is not valid
|
CTIERR_INVALID_PARK_DN
|
This error indicates that the DN is an invalid park DN
|
CTIERR_INVALID_PARK_REGISTRATION_HANDLE
|
This error indicates that the handle is an invalid park registration handle
|
CTIERR_INVALID_RESOURCE_TYPE
|
This error indicates an invalid resource type
|
CTIERR_IPADDRMODE_MISMATCH
|
This indicates the registration failure due to IP Addressing Mode mismatch.
|
CTIERR_LINE_OUT_OF_SERVICE
|
This error indicates that line is out of service.
|
CTIERR_LINE_RESTRICTED
|
This er ror indicates that the line is restricted
|
CTIERR_MAXCALL_LIMIT_REACHED
|
This error indicates that maximum call limit has reached
|
CTIERR_MEDIA_ALREADY_TERMINATED_DYNAMIC
|
This error indicates that device registration failed as device is registered with Dynamic media termination
|
CTIERR_MEDIA_ALREADY_TERMINATED_NONE
|
This error indicates that device registration failed as device is already registered with media termination none
|
CTIERR_MEDIA_ALREADY_TERMINATED_STATIC
|
This error indicates that device registration failed as device is registered with Static media termination
|
CTIERR_MEDIA_CAPABILITY_MISMATCH
|
This error indicates that device registration failed as media capability of device does not match with current device registration
|
CTIERR_MEDIA_RESOURCE_NAME_SIZE_EXCEEDED
|
This error indicates that media resource name size has exceeded limit
|
CTIERR_MEDIAREGISTRATIONTYPE_DO_NOT_MATCH
|
This error indicates that media registration types do not match
|
CTIERR_MESSAGE_TOO_BIG
|
This error indicates that message is too big
|
CTIERR_MORE_ACTIVE_CALLS_THAN_RESERVED
|
This error indicates that there are more active calls than reserved
|
CTIERR_NO_EXISTING_CALLS
|
This error indicates there are no existing calls
|
CTIERR_NO_EXISTING_CONFERENCE
|
This error indicates that there is no existing conference
|
CTIERR_NO_RECORDING_SESSION
|
This error indicates recording request failed as there is no recording session
|
CTIERR_NO_RESPONSE_FROM_MP
|
This error indicates no response from media resource
|
CTIERR_NOT_PRESERVED_CALL
|
This error indicates that the call is not preserved
|
CTIERR_OPERATION_FAILED_QUIETCLEAR
|
This error indicates that feature unavailable for this call due to temporary failure
|
CTIERR_OPERATION_NOT_ALLOWED
|
This error indicates that this operation is not allowed
|
CTIERR_OUT_OF_BANDWIDTH
|
This error indicates out of bandwidth error
|
CTIERR_OWNER_NOT_ALIVE
|
This error indicates a failure during registering the device
|
CTIERR_PENDING_ACCEPT_OR_ANSWER_REQUEST
|
This error indicates that there is a pending accept or answer request
|
CTIERR_PENDING_START_MONITORING_REQUEST
|
This error indicates there is a pending start monitoring request
|
CTIERR_PENDING_START_RECORDING_REQUEST
|
This error indicates there is a pending start recording request
|
CTIERR_PENDING_STOP_RECORDING_REQUEST
|
This error indicates there is a pending stop recording request
|
CTIERR_PRIMARY_CALL_INVALID
|
This error indicates that primary call in monitoring request in invalid or gone idle
|
CTIERR_PRIMARY_CALL_STATE_INVALID
|
This error indicates that primary call in monitoring request is in invalid state
|
CTIERR_RECORDING_ALREADY_INPROGRESS
|
This error indicates recording request failed that recording is already in progress
|
CTIERR_RECORDING_CONFIG_NOT_MATCHING
|
This error indicates recording configuration does not match
|
CTIERR_RECORDING_SESSION_INACTIVE
|
This error indicates recording request failed because recording session is inactive
|
CTIERR_REDIRECT_UNAUTHORIZED_COMMAND_USAGE
|
This error indicates a redirect unauthorized command usage
|
CTIERR_REGISTER_FEATURE_ACTIVATION_FAILED
|
This error indicates that register feature activation failed
|
CTIERR_REGISTER_FEATURE_APP_ALREADY_
REGISTERED
|
Register feature application was already registered
|
CTIERR_REGISTER_FEATURE_PROVIDER_NOT_
REGISTERED
|
Register feature provider was not registered.
|
CTIERR_RESOURCE_NOT_AVAILABLE
|
This error indicates that resource is not available to fulfill the request
|
CTIERR_START_MONITORING_FAILED
|
This error indicates that start monitoring request failed
|
CTIERR_START_RECORDING_FAILED
|
This error indicates that start recording request failed
|
CTIERR_STATION_SHUT_DOWN
|
This error indicates that there is a station shutdown
|
CTIERR_SYSTEM_ERROR
|
This error indicates CTI system error
|
CTIERR_UDP_PASS_THROUGH_NOT_SUPPORTED
|
This error indicates UDP data passthrough not supported
|
CTIERR_UNKNOWN_EXCEPTION
|
This error indicates an unknown exception occured
|
CTIERR_UNSUPPORTED_CALL_PARK_TYPE
|
This error indicates that call park type is not supported
|
CTIERR_UNSUPPORTED_CFWD_TYPE
|
This error indicates that the call forward type is unsupported
|
CTIERR_USER_NOT_AUTH_FOR_SECURITY
|
This error indicates user is not authorized for secure connection
|
DARES_INVALID_REQ_TYPE
|
This error indicates that there is an internal call processing error: DaRes invalid request type
|
DATA_SIZE_LIMIT_EXCEEDED
|
This error indicates that XML data object size is bigger than allowed.
|
DB_ERROR
|
This error indicates that the device query contained an illegal device type
|
DB_ILLEGAL_DEVICE_TYPE
|
This error indicates illegal device type in DB
|
DB_NO_MORE_DEVICES
|
This error is no longer used.
|
DESTINATION_BUSY
|
This error indicates that destination is busy
|
DESTINATION_UNKNOWN
|
This error indicates that destination is not found
|
DEVICE_ALREADY_REGISTERED
|
This error indicates that device registration attempt failed, because the device is already registered
|
DEVICE_NOT_OPEN
|
This error indicates that an attempt to open a line failed, as the device is not opened or the device is not registered.
|
DEVICE_OUT_OF_SERVICE
|
This error indicates that device is out of service.
|
DIGIT_GENERATION_ALREADY_IN_PROGRESS
|
This error indicates that digit generation is already in progress.
|
DIGIT_GENERATION_CALLSTATE_CHANGED
|
This error indicates that call state is invalid to continue.
|
DIGIT_GENERATION_WRONG_CALL_HANDLE
|
This error indicates that call handle is invalid and call may be gone.
|
DIGIT_GENERATION_WRONG_CALL_STATE
|
This error indicates that call state is not valid to generate digits.
|
DIRECTORY_LOGIN_FAILED
|
This error indicates that directory login failed: directory not initialized
|
DIRECTORY_LOGIN_NOT_ALLOWED
|
This error indicates that directory login failed
|
DIRECTORY_TEMPORARY_UNAVAILABLE
|
This error indicates that directory is temporarily unavailable.
|
EXISTING_FIRSTPARTY
|
This error indicates that there is already a device controlling media.
|
HOLDFAILED
|
This error indicates that the hold was rejected by line control or call control layers
|
ILLEGAL_CALLINGPARTY
|
This error indicates that an attempt was made to originate call using a calling party that is not on the device
|
ILLEGAL_CALLSTATE
|
This error indicates line is not in a legal state to invoke the request
|
ILLEGAL_HANDLE
|
This error indicates the handle is not valid
|
ILLEGAL_MESSAGE_FORMAT
|
This error indicates that there is a QBE protocol error
|
INCOMPATIBLE_PROTOCOL_VERSION
|
This error indicates that JTAPI and CTI versions are not compatible : CTI Error Protocol version not supported
|
INVALID_LINE_HANDLE
|
This error indicates that attempt to perform a line operation on an invalid line handle.
|
INVALID_RING_OPTION
|
This error indicates that the ring option is invalid
|
LINE_GREATER_THAN_MAX_LINE
|
This error indicates that line is greater than the maximum available lines on this device
|
LINE_INFO_DOES_NOT_EXIST
|
This error indicates that line information does not exist in the database.
|
LINE_NOT_PRIMARY
|
This error indicates that internal error returned from call control.
|
LINECONTROL_FAILURE
|
This error indicates line control refuses to allow a new call to be initiated because of its current state.
|
MAX_NUMBER_OF_CTI_CONNECTIONS_REACHED
|
The maximum number of CTI connections was reached.
|
MSGWAITING_DESTN_INVALID
|
This error indicates that attempt to set message waiting lamp for an invalid DN; Message Waiting Destination not found.
|
NO_ACTIVE_DEVICE_FOR_THIRDPARTY
|
This error indicates there is no active device for thirdparty
|
NO_CONFERENCE_BRIDGE
|
This error indicates that no conference bridge available
|
NOT_INITIALIZED
|
This error indicates that attempt is made to open a provider before CTI initialization completes
|
PROTOCOL_TIMEOUT
|
Internal error returned from call control
|
PROVIDER_ALREADY_OPEN
|
This error indicates that an attempt is made to reopen provider
|
PROVIDER_CLOSED
|
This error indicates an attempt to close provider while it is already closed
|
PROVIDER_NOT_OPEN
|
This error indicates that device list incomplete or device list query timeout or query aborted
|
REDIRECT_CALL_CALL_TABLE_FULL
|
This error indicates that internal error is returned from call control
|
REDIRECT_CALL_DESTINATION_BUSY
|
This error indicates that the redirect destination is busy
|
REDIRECT_CALL_DESTINATION_OUT_OF_ORDER
|
This error indicates that redirect destination is out of order
|
REDIRECT_CALL_DIGIT_ANALYSIS_TIMEOUT
|
This error indicates a digit analyss time out, this is an internal error returned from call control
|
REDIRECT_CALL_DOES_NOT_EXIST
|
This error indicates that an attempt is made to redirect a call that does not exist or is not longer active
|
REDIRECT_CALL_INCOMPATIBLE_STATE
|
This error indicates that internal error is returned from call control
|
REDIRECT_CALL_MEDIA_CONNECTION_FAILED
|
This error indicates media connection failure, this is an internal error returned from call control
|
REDIRECT_CALL_NORMAL_CLEARING
|
This error indicates that redirect failed because of normal call clearing
|
REDIRECT_CALL_ORIGINATOR_ABANDONED
|
This error indicates that far end hung up on the call being redirected
|
REDIRECT_CALL_PARTY_TABLE_FULL
|
This error indicates that internal error is returned from call control
|
REDIRECT_CALL_PENDING_REDIRECT_TRANSACTION
|
This error indicates that internal error is returned from call control
|
REDIRECT_CALL_PROTOCOL_ERROR
|
This error indicates a protocol error, this is an internal error returned from call control
|
REDIRECT_CALL_UNKNOWN_DESTINATION
|
This error indicates that an attempt is made to redirect to an unknown destination
|
REDIRECT_CALL_UNKNOWN_ERROR
|
This error indicates that internal error is returned from call control
|
REDIRECT_CALL_UNKNOWN_PARTY
|
This error indicates an unknown party is detected, this is an internal error returned from call control
|
REDIRECT_CALL_UNRECOGNIZED_MANAGER
|
This error indicates that internal error is returned from call control
|
REDIRECT_CALLINFO_ERR
|
This error indicates that internal error is returned from call control
|
REDIRECT_ERR
|
This error indicates that internal error is returned from call control
|
RETRIEVEFAILED
|
This error indicates that retrieval of call was rejected by line control or call control
|
RETRIEVEFAILED_ACTIVE_CALL_ON_LINE
|
This error indicates that error occurred in retrieving held call; because there is already another active call on the line
|
SSAPI_NOT_REGISTERED
|
This error indicates that the redirect command was issued when the internal supporting interface was not initialized; either CTI has not yet finished its initialization or an internal error occurred
|
TIMEOUT
|
This error indicates that the request has timed out.
|
TRANSFER_INACTIVE
|
This error indicates that attempt to complete transfer, while consult tranfer is not there
|
TRANSFERFAILED
|
This error indicates that the transfer failed probably because one of the call legs was hung up or disconnected from the far end
|
TRANSFERFAILED_CALLCONTROL_TIMEOUT
|
This error indicates that expected response from call control not received during a transfer
|
TRANSFERFAILED_DESTINATION_BUSY
|
This error indicates that an attempt is made to transfer call to a busy destination
|
TRANSFERFAILED_DESTINATION_UNALLOCATED
|
This error indicates an attempt is made to to transfer call to a directory number that is not registered
|
TRANSFERFAILED_OUTSTANDING_TRANSFER
|
This error indicates that existing transfer is still in progress
|
UNDEFINED_LINE
|
This error indicates that the line that was specified, is not found on the device
|
UNKNOWN_GLOBAL_CALL_HANDLE
|
This error indicates that the global call handle is unknown
|
UNRECOGNIZABLE_PDU
|
This error indicates that there is a QBE protocol error
|
UNSPECIFIED
|
This error indicates that an unspecified error has occurred.
|
Feedback
Additional Troubleshooting Information