|
|||||||||
| PREV NEXT | FRAMES NO FRAMES | ||||||||
CiscoTerminal.getSupportedEncoding () for this terminal is
ASCII and that this terminal supports only ASCII_ENCODING.
TraceWriter to a
TraceWriterManager This class must be extended to provide the functionality to trace
to different streams.CiscoAddrEvFilter interface to selectively restrict those
Address events that are not of interest.CiscoG711MediaCapabilityCiscoG711MediaCapability() -
Constructor for class com.cisco.jtapi.extensions.CiscoG711MediaCapability
CiscoG711MediaCapabilityCiscoG723MediaCapability - Class in com.cisco.jtapi.extensionsCiscoG723MediaCapabilityCiscoG723MediaCapability() -
Constructor for class com.cisco.jtapi.extensions.CiscoG723MediaCapability
CiscoG723MediaCapabilityCiscoG729MediaCapability - Class in com.cisco.jtapi.extensionsCiscoG729MediaCapabilityCiscoG729MediaCapability() -
Constructor for class com.cisco.jtapi.extensions.CiscoG729MediaCapability
CiscoG729MediaCapabilityCiscoGSMMediaCapability - Class in com.cisco.jtapi.extensionsCiscoGSMMediaCapabilityCiscoGSMMediaCapability() -
Constructor for class com.cisco.jtapi.extensions.CiscoGSMMediaCapability
CiscoGSMMediaCapabilityCiscoHuntConnCreatedEv - Interface in com.cisco.jtapi.extensionsCiscoIsacMediaCapabilityCiscoJtapiException - Interface in com.cisco.jtapi.extensionsCiscoJtapiException interface defines error codes that CTI requests may return.CiscoMediaCapability object for the specified payload type and
packet size (in milliseconds).
CiscoRouteUsedEvent event indicates that the RouteSession moved
into the RouteSession.ROUTE_USED state and the call terminated at a destination as a
result of application routing.CiscoTermButtonPressedEv event is delivered on the TerminalObserver when a button is
pressed on the Terminal.CiscoTermEvFilter interface to selectively restrict those
Terminal events that are not of interest.CiscoTone interface defines CTI Tone constant codes.CiscoMediaTerminal.unregister method throws this exception when the
unregistration process fails.CiscoUrlInfo object specifies the properties of the Uniform Resources Locator
(URL) associated with a SIP endpoint.CiscoWideBandMediaCapability object with the specified packet size.
CiscoWideBandMediaCapability object with a default ten-millisecond
packet size.
TraceWriter.
ConditionalTrace interface extends the Trace interface and defines
the methods that allow enabling and disabling of tracing for this particular condition.DefaultAlarmWriter implementation of the AlarmWriter interface.CiscoPartyInfo object.
SyslogTraceWriter makes an exception to the println() method in that it
places a '\0' instead of a System specified line seperator to terminate the message packet.
println method
ACTIVE calls with the same
CallManagerID.
Terminal object representing the device of the current called party.
Terminal object representing the device of the current calling
party.
String getErrorDescription (); instead.
String getErrorName (); instead.
CiscoPartyInfo objects on this connection.
ACTIVE TerminalConnection on this terminal.
ACTIVE TerminalConnection on this terminal.
CiscoTone.
CiscoTerminal.getSupportedEncoding () for this
CiscoMediaTerminal or RoutePoint is NOT_APPLICABLE.
REASON_CLICK_TO_CONFERENCE>: Indicates that the events are caused by Click to Conference feature
- REASON_CONFERENCE -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is CONFERENCE.
- REASON_DIRECTCALL -
Static variable in interface com.cisco.jtapi.extensions.CiscoConnection
- This Connection results from a direct call.
- REASON_DPARK_CALLPARK -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is the DPARK feature.
- REASON_DPARK_REVERSION -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is DPARK Reversion.
- REASON_DPARK_UNPARK -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is DPARK UNPARK.
- REASON_EXTERNALCALLCONTROL -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for events caused by the External Call Control feature
- REASON_FAC_CMC -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is the FAC or CMC feature.
- REASON_FORWARD_NO_RETRIEVE -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
REASON_FORWARD_NO_RETRIEVE>: Indicates that reason for the forward is
FORWARD NO RETRIEVE destination DN is configured and the Park Monitoring Forward-No-Retrieve
timer has expired.
- REASON_FORWARDALL -
Static variable in interface com.cisco.jtapi.extensions.CiscoConnection
- This Connection results from unconditional forwarding.
- REASON_FORWARDALL -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is FORWARD.
- REASON_FORWARDBUSY -
Static variable in interface com.cisco.jtapi.extensions.CiscoConnection
- This Connection results from a forwarding on busy.
- REASON_FORWARDBUSY -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is that is Call Forward Busy is configured.
- REASON_FORWARDNOANSWER -
Static variable in interface com.cisco.jtapi.extensions.CiscoConnection
- This Connection results from a forwarding on no answer.
- REASON_FORWARDNOANSWER -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is that Call Forward No Answer is configured.
- REASON_IMMDIVERT -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is imm divert.
- REASON_LOGIN -
Static variable in interface com.cisco.jtapi.extensions.CiscoProvTerminalUnRegisteredEv
- This indicates that Terminal unregistered due to a login
- REASON_LOGOUT -
Static variable in interface com.cisco.jtapi.extensions.CiscoProvTerminalUnRegisteredEv
- This indicates that Terminal unregistered due to a logout
- REASON_MOBILITY -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for events caused by the Mobility Manager feature.
- REASON_MOBILITY_CELLPICKUP -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for events caused by the Mobility Manager feature when the softkey cellpickup
feature was used.
- REASON_MOBILITY_FOLLOWME -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for events caused by the Mobility Manager feature when roaming is enabled.
- REASON_MOBILITY_HANDIN -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for events caused by the Mobility Manager feature when a dual-mode mobile phone
moves from the cellular network into range of the enterprise wireless network.
- REASON_MOBILITY_HANDOUT -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for events caused by the Mobility Manager feature when a dual-mode mobile phone
moves from the enterprise wireless network into the cellular network.
- REASON_MOBILITY_IVR -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for events caused by the Mobility Manager feature when IVR was used to make a call
to an IP phone within a Unified CM cluster.
- REASON_NORMAL -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is NORMAL.
- REASON_OUTBOUND -
Static variable in interface com.cisco.jtapi.extensions.CiscoConnection
- This Connection is an originating Connection, not a destination Connection.
- REASON_PARK -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is the PARK feature.
- REASON_PARKREMAINDER -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- Deprecated. Use REASON_PARKREMINDER.
- REASON_PARKREMINDER -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is a parked call reminder.
- REASON_QSIG_PR -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is QSIG path replacement.
- REASON_REDIRECT -
Static variable in interface com.cisco.jtapi.extensions.CiscoConnection
- This Connection results from a redirection.
- REASON_REDIRECT -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for event is REDIRECT.
- REASON_REFER -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is a REFER done at Unified CM.
- REASON_REPLACE -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is the REPLACE feature done at Unified CM.
- REASON_RESET -
Static variable in interface com.cisco.jtapi.extensions.CiscoProvTerminalUnRegisteredEv
- This indicates that Terminal unregistered due to reset
- REASON_SAF_CCD_PSTN_FAILOVER -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
REASON_SAF_CCD_PSTN_FAILOVER>: Indicates that the reason for the Call Event is that
the call has failed over to a PSTN line as a result of the SAF feature
- REASON_SILENTMONITORING -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is SILENT MONITORING.
- REASON_TRANSFER -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is TRANSFER.
- REASON_TRANSFERREDCALL -
Static variable in interface com.cisco.jtapi.extensions.CiscoConnection
- This Connection results from a transfer.
- REASON_UNKNOWN -
Static variable in interface com.cisco.jtapi.extensions.CiscoProvTerminalUnRegisteredEv
- This indicates that Terminal unregistered for UNKNOWM reason
- REASON_UNPARK -
Static variable in interface com.cisco.jtapi.extensions.CiscoFeatureReason
- The reason for the event is the UNPARK feature.
- RECEIVE_ONLY -
Static variable in interface com.cisco.jtapi.extensions.CiscoMediaConnectionMode
- Only the receive channel is active.
- redirect(String, int) -
Method in interface com.cisco.jtapi.extensions.CiscoConnection
- This method overloads the CallControlConnection.redirect() method.
- redirect(String, int, int) -
Method in interface com.cisco.jtapi.extensions.CiscoConnection
- This method overloads the CallControlConnection.redirect() method.
- redirect(String, int, int, String) -
Method in interface com.cisco.jtapi.extensions.CiscoConnection
- This method overloads the CallControlConnection.redirect() method.
- redirect(String, int, int, int) -
Method in interface com.cisco.jtapi.extensions.CiscoConnection
- This method overloads the CallControlConnection.redirect() method.
- redirect(String, int, int, int, String, String, String) -
Method in interface com.cisco.jtapi.extensions.CiscoConnection
- This method overloads the CallControlConnection.redirect() method.
- redirect(String, int, int, int, String, String, String, int) -
Method in interface com.cisco.jtapi.extensions.CiscoConnection
- This method overloads CallControlConnection.redirect().
- REDIRECT_CALL_CALL_TABLE_FULL -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that internal error is returned from call control
- REDIRECT_CALL_DESTINATION_BUSY -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that the redirect destination is busy
- REDIRECT_CALL_DESTINATION_OUT_OF_ORDER -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that redirect destination is out of order
- REDIRECT_CALL_DIGIT_ANALYSIS_TIMEOUT -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates a digit analyss time out, this is an internal error returned from call
control
- REDIRECT_CALL_DOES_NOT_EXIST -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that an attempt is made to redirect a call that does not exist or is not
longer active
- REDIRECT_CALL_INCOMPATIBLE_STATE -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that internal error is returned from call control
- REDIRECT_CALL_MEDIA_CONNECTION_FAILED -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates media connection failure, this is an internal error returned from call
control
- REDIRECT_CALL_NORMAL_CLEARING -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that redirect failed because of normal call clearing
- REDIRECT_CALL_ORIGINATOR_ABANDONED -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that far end hung up on the call being redirected
- REDIRECT_CALL_PARTY_TABLE_FULL -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that internal error is returned from call control
- REDIRECT_CALL_PENDING_REDIRECT_TRANSACTION -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that internal error is returned from call control
- REDIRECT_CALL_PROTOCOL_ERROR -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates a protocol error, this is an internal error returned from call control
- REDIRECT_CALL_UNKNOWN_DESTINATION -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that an attempt is made to redirect to an unknown destination
- REDIRECT_CALL_UNKNOWN_ERROR -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that internal error is returned from call control
- REDIRECT_CALL_UNKNOWN_PARTY -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates an unknown party is detected, this is an internal error returned from
call control
- REDIRECT_CALL_UNRECOGNIZED_MANAGER -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that internal error is returned from call control
- REDIRECT_CALLINFO_ERR -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that internal error is returned from call control
- REDIRECT_DROP_ON_FAILURE -
Static variable in interface com.cisco.jtapi.extensions.CiscoConnection
- This redirect mode instructs the implementation to perform redirect without checking the
validity or availability of the destination.
- REDIRECT_ERR -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that internal error is returned from call control
- REDIRECT_NORMAL -
Static variable in interface com.cisco.jtapi.extensions.CiscoConnection
- This redirect mode instructs the implementation to perform redirect if the destination is
valid and available.
- register(InetAddress, int, CiscoMediaCapability[]) -
Method in interface com.cisco.jtapi.extensions.CiscoMediaTerminal
- This method registers the MediaTerminal.
- register(InetAddress, int) -
Method in interface com.cisco.jtapi.extensions.CiscoMediaTerminal
- Deprecated.
- register(InetAddress, int, CiscoMediaCapability[], int[]) -
Method in interface com.cisco.jtapi.extensions.CiscoMediaTerminal
- This method registers the MediaTerminal.
- register(InetAddress, int, CiscoMediaCapability[], int[], InetAddress, int) -
Method in interface com.cisco.jtapi.extensions.CiscoMediaTerminal
- The CiscoMediaTerminal must be in the
CiscoTerminal.UNREGISTERED state and its
Provider must be in the Provider.IN_SERVICE state The successful effect of this
method is to register the MediaTerminal.
- register(CiscoMediaCapability[]) -
Method in interface com.cisco.jtapi.extensions.CiscoMediaTerminal
- This method registers the MediaTerminal with the specified CiscoMediaCapabilities.
- register(CiscoMediaCapability[], int[]) -
Method in interface com.cisco.jtapi.extensions.CiscoMediaTerminal
- This method registers a MediaTerminal with the specified CiscoMediaCapabilities and supported
SRTP algorithms.
- register(CiscoMediaCapability[], int[], int) -
Method in interface com.cisco.jtapi.extensions.CiscoMediaTerminal
- The CiscoMediaTerminal must be in the
CiscoTerminal.UNREGISTERED state and its
Provider must be in the Provider.IN_SERVICE state.
- register(CiscoMediaCapability[], int) -
Method in interface com.cisco.jtapi.extensions.CiscoRouteTerminal
- Registers a Terminal with specified CiscoMediaCapabilities and register type.
- register(CiscoMediaCapability[], int, int[]) -
Method in interface com.cisco.jtapi.extensions.CiscoRouteTerminal
- Registers a Terminal with the specified CiscoMediaCapabilities, registrationType, and
supported SRTP algorithms.
- register(CiscoMediaCapability[], int, int[], int) -
Method in interface com.cisco.jtapi.extensions.CiscoRouteTerminal
- The CiscoRouteTerminal must be in the
CiscoTerminal.UNREGISTERED state and its
Provider must be in the Provider.IN_SERVICE state.
- registerFeature(int) -
Method in interface com.cisco.jtapi.extensions.CiscoProvider
- used to register for a particular feature for which application will get Provider events.
- registerModule(TraceModule, String[], TraceWriterManager) -
Static method in class com.cisco.services.tracing.TraceManagerFactory
- Returns an instance of a TraceManager object.
- registerModule(TraceModule, TraceWriterManager) -
Static method in class com.cisco.services.tracing.TraceManagerFactory
- Returns an instance of a TraceManager object.
- registerModule(TraceModule) -
Static method in class com.cisco.services.tracing.TraceManagerFactory
- Returns an instance of a TraceManager object.
- registerPickupAlert(String, String) -
Method in interface com.cisco.jtapi.extensions.CiscoProvider
- Registers this provider to receive pickup events for the specified DN/Partition
- registerPickupAlert(CiscoPickupGroup) -
Method in interface com.cisco.jtapi.extensions.CiscoProvider
- Registers this provider to receive pickup events for the specified CiscoPickupGroup
- registerRouteCallback(RouteCallback, boolean) -
Method in interface com.cisco.jtapi.extensions.CiscoRouteAddress
- Deprecated.
- removeAllParameters() -
Method in class com.cisco.services.alarm.ParameterList
- remove all the parameters in the list
- removeParameter(String) -
Method in class com.cisco.services.alarm.ParameterList
- remove a particular parameter if it is in the list
- removeTrace(Trace) -
Method in class com.cisco.services.tracing.implementation.TraceManagerImpl
-
- removeTrace(Trace) -
Method in interface com.cisco.services.tracing.TraceManager
- Removes a Trace object given an object.
- removeTraceWriter(TraceWriter) -
Method in class com.cisco.services.tracing.implementation.TraceWriterManagerImpl
- Remove the Tracewriter from the array of trace writers
- removeTraceWriter(TraceWriter) -
Method in interface com.cisco.services.tracing.TraceWriterManager
- Remove the TraceWriter from the array in the manager
- RESERVED_FOR_EXTENSION -
Static variable in interface com.cisco.jtapi.extensions.CiscoPartyInfo
- This NumberType is same as 6; it represents its a fast dial call - not being used currently
- RESET_ORIGINALCALLED -
Static variable in interface com.cisco.jtapi.extensions.CiscoRouteSession
- This is a parameter value for PreferedOriginalCalled Option; if the value of
preferedOriginalCalledOption is set to this, it will reset the OriginalCalled to
preferedOriginalCalledNumber.
- resetIntercomTarget() -
Method in interface com.cisco.jtapi.extensions.CiscoIntercomAddress
- Resets the intercom target DN, intercom target label, and intercom target Unicode label to
their default values.
- RETRIEVEFAILED -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that retrieval of call was rejected by line control or call control
- RETRIEVEFAILED_ACTIVE_CALL_ON_LINE -
Static variable in interface com.cisco.jtapi.extensions.CiscoJtapiException
- This error indicates that error occurred in retrieving held call; because there is already
another active call on the line
- RINGER_DEFAULT -
Static variable in interface com.cisco.jtapi.extensions.CiscoAddress
- Sets the ringer status to the configured value.
- RINGER_DISABLE -
Static variable in interface com.cisco.jtapi.extensions.CiscoAddress
- Disables the ringer for the address.
- RINGER_ENABLE -
Static variable in interface com.cisco.jtapi.extensions.CiscoAddress
- Enables the ringer for the address.
- ROLLOVER_ANY_DN -
Static variable in interface com.cisco.jtapi.extensions.CiscoTerminal
- This indicates that Terminal is configured to roll over calls to any dn on the terminal
- ROLLOVER_SAME_DN -
Static variable in interface com.cisco.jtapi.extensions.CiscoTerminal
- This indicates that Terminal is configured to roll over calls to same dn on the terminal
- ROLLOVER_THRESHOLD -
Static variable in class com.cisco.services.tracing.LogFileTraceWriter
-
- ROUTEADDRESS_SEARCH_SPACE -
Static variable in interface com.cisco.jtapi.extensions.CiscoRouteSession
- This indicates that the redirect should be done by using the search space of the route point
address.
try/catch logic for observer callbacks
destination.
enable is true, message-waiting gets activated if not already
activated.
destination.
TraceManager.addSubFacilities method
TraceManager.addSubFacility method
SyslogTraceWriter refines the BaseTraceWriter to allow tracing to
syslog.Trace interface defines the methods that allow application tracing.TraceManager interface defines the methods that allow applications trace
management.TraceManagerFactory class is a class by which applications obtain a TraceManager
object.TraceManagerImpl class implements the TraceManager interface.TraceModule interface serves two purposes.CallControlCall.transfer(String address) interface
except that it also takes facCode (Forced Authorization Code) and cmcCode (Client Matter
Code) if the transfer Address requires these codes to offer the call.
CiscoTerminal.getSupportedEncoding () for this terminal is
UCS2UNICODE_ENCODING.
UnconditionalTrace interface extends the Trace interface.CiscoTerminal.getSupportedEncoding () for this terminal is
UNKNOWN.
Provider.IN_SERVICE state.
|
|||||||||
| PREV NEXT | FRAMES NO FRAMES | ||||||||