Interdomain Federation for IM and Presence Service on Cisco Unified Communications Manager, Release 9.0(1)
Federation integration verification
Download this chapter
Federation integration verificationFederation integration verification
Download the complete book
Interdomain Federation for IM and Presence Service on Cisco Unified Communications Manager, Release 9.0(1)Interdomain Federation for IM and Presence Service on Cisco Unified Communications Manager, Release 9.0(1) (PDF - 5 MB)
 Feedback

Federation integration verification

Verify SIP federation configuration

This procedure describes how to verify the configuration for a federated network between a IM and Presence Service enterprise deployment, and a Microsoft OCS enterprise deployment. Use this procedure as a guide for verifying the other types of integrations if necessary.

Procedure
    Step 1   Log on to the Cisco Jabber client or the third-party XMPP client.
    Step 2   Log on to two federated Microsoft Office Communicator clients.
    Step 3   Perform the following steps on the first Microsoft Office Communicator client:
    1. Add the IM and Presence user as a contact.
    2. A pop-up message displays on IM and Presence requesting that you accept or block or ignore the presence subscription of Microsoft Office Communicator user.
    3. Check that the IM and Presence user and the Microsoft Office Communicator user are able to see each other's availability.
    Step 4   Perform the following steps on the client of the IM and Presence client:
    1. Add the second Microsoft Office Communicator user as a contact.
    2. Check that you can see the availability of the Microsoft Office Communicator user.
    3. A pop-up message should appear on the user client for the Microsoft Office Communicator user informing you that the Cisco Jabber user has been added as a contact.
    Step 5   Toggle between the availability states on both the clients of the IM and Presence user and the Microsoft Office Communicator clients. Check that the availability state changes for the contacts on each client.
    Step 6   Initiate an IM from the client of a IM and Presence user to a Microsoft Office Communicator user.
    Step 7   Check that the IM window appears on Microsoft Office Communicator with the message from the IM and Presence user.
    Step 8   Close both the IM window on the client of the IM and Presence user and IM window on the Microsoft Office Communicator client.
    Step 9   Initiate an IM from Microsoft Office Communicator user to the IM and Presence user.
    Step 10   Check that an IM window appears on the client of the IM and Presence user with the message from the Microsoft Office Communicator user.
    Step 11   On the Cisco Jabber client, perform the following steps:
    1. Block one of the Microsoft Office Communicator users.
      Note   

      Any third-party clients that do not support XEP-0016 - Privacy Lists, if you block from a third-party XMPP client, you only block IM; users can still exchange availability status. To block server-side IM and availability, the user configures their privacy settings from the IM and Presence Users Options interface, or from the Privacy configuration on Cisco Jabber.

    2. Check that this Microsoft Office Communicator user now sees that the availability of the IM and Presence user as offline. The second Microsoft Office Communicator user should still be able to see availability status for the IM and Presence user.
    3. On the client of the IM and Presence user, the blocked Microsoft Office Communicator user should still appear online, and you should be able to initiate an IM to the blocked Microsoft Office Communicator user.
    Step 12   Block the IM and Presence user from the Microsoft Office Communicator client.
    Step 13   Verify that the presence of the Microsoft Office Communicator user is no longer available on the client of the IM and Presence user.

    Verify XMPP federation configuration

    This procedure describes how to verify the configuration for a federated network between a IM and Presence Service Release 9.0 enterprise deployment, and either a WebEx, an IBM Sametime. or another IM and Presence Service Release 9.0 enterprise deployment. The procedure below describes the procedure for a IM and Presence Service Release 9.0 and a WebEx deployment. Use this procedure as a guide to verify the other types of XMPP federations.

    Procedure
      Step 1   Log on to the Cisco Jabber client or the third-party XMPP client connected to the IM and Presence Service Release 9.0 server.
      Step 2   Log on to two federated WebEx Connect clients.
      Step 3   Perform the following steps on the first WebEx Connect client:
      1. Add the IM and Presence Service user as a contact.
      2. A pop-up message displays on client of the IM and Presence Service user requesting that you accept or block or ignore the presence subscription from the WebEx Connect user. Accept the subscription.
      3. Check that the IM and Presence Service user and the WebEx Connect user are able to see each other's availability.
      Step 4   Perform the following steps on the client of the IM and Presence Service user:
      1. Add the second WebEx Connect user as a contact.
      2. A pop-up should appear on the WebEx Connect client. Accept the subscription.
      3. Check that you can see the availability of the WebEx Connect user.
      Step 5   Toggle between the availability states on both the client of the IM and Presence Service user and the WebEx Connect client. Check that the availability state changes for the contacts on each client.
      Step 6   Initiate an IM from the client of the IM and Presence Service user to a WebEx Connect contact.
      Step 7   Check that the IM window displays on WebEx Connect client with the IM from the IM and Presence Service user.
      Step 8   Close the IM window on both clients.
      Step 9   Initiate an IM from the WebEx Connect user to the IM and Presence Service user.
      Step 10   Check that an IM window displays on the client of the IM and Presence Service user with the IM from the WebEx Connect user.
      Step 11   On the client of the IM and Presence Service user, perform the following steps:
      1. Block one of WebEx Connect users.
        Note   

        If you block from a third-party XMPP client, you only block IM; users can still exchange availability status. To block server-side IM and availability, the user configures their privacy settings from the IM and Presence Users Options interface, or from the Privacy configuration on Cisco Jabber.

      2. Check that this WebEx Connect user now sees that the availability of the IM and Presence Service user as offline. The second WebEx Connect user should still be able to see availability status for the IM and Presence Service user.
      3. On the client of the IM and Presence Service user, the blocked WebEx Connect user should still appear as online, however you will not be able to send an IM to the blocked WebEx Connect user.
      Step 12   Block the IM and Presence Service user from the WebEx Connect client.
      Step 13   Verify that the availability of the WebEx Connect user is no longer available on the client of the IM and Presence Service user.