Interdomain Federation for IM and Presence Service on Cisco Unified Communications Manager, Release 9.0(1)
Sample Cisco Adaptive Security Appliance configuration
Download this chapter
Sample Cisco Adaptive Security Appliance configurationSample Cisco Adaptive Security Appliance configuration
Download the complete book
Interdomain Federation for IM and Presence Service on Cisco Unified Communications Manager, Release 9.0(1)Interdomain Federation for IM and Presence Service on Cisco Unified Communications Manager, Release 9.0(1) (PDF - 3 MB)
 Feedback

Sample Cisco Adaptive Security Appliance configuration

Sample PAT commands and access list configuration for SIP federation

This section provides a sample configuration for a IM and Presence server that is federating with a foreign OCS enterprise deployment. There are two additional intercluster IM and Presence servers in the local enterprise deployment.

The following values are used in this sample configuration:

  • Public IM and Presence IP Address = 10.10.10.10
  • Private Routing IM and Presence IP Address = 1.1.1.1
  • Private Second IM and Presence IP Address = 2.2.2.2
  • Private Third IM and Presence IP Address = 3.3.3.3
  • Peer Auth Listener Port on IM and Presence = 5062
  • Netmask = 255.255.255.255
  • Foreign Domain = abc.com
  • Microsoft OCS External Interface = 20.20.20.20

These PAT commands are defined for the (routing) IM and Presence server:

(Cisco Adaptive Security Appliance Release 8.2:) 

static (inside,outside) tcp 10.10.10.10 5061 1.1.1.1 5062 netmask 255.255.255.255static (inside,outside) tcp 10.10.10.10 5080 1.1.1.1 5080 netmask 255.255.255.255
static (inside,outside) tcp 10.10.10.10 5060 1.1.1.1 5060 netmask 255.255.255.255

(Cisco Adaptive Security Appliance Release 8.3:) 

nat (inside,outside) source static obj_host_1.1.1.1 obj_host_10.10.10.10 serviceobj_tcp_source_eq_5061 obj_tcp_source_eq_5062
nat (inside,outside) source static obj_host_1.1.1.1 obj_host_10.10.10.10 service
obj_tcp_source_eq_5080 obj_tcp_source_eq_5080
nat (inside,outside) source static obj_host_1.1.1.1 obj_host_10.10.10.10 service
obj_tcp_source_eq_5060 obj_tcp_source_eq_5060

These PAT commands are defined for the two additional intercluster IM and Presence servers in the enterprise deployment:

(Cisco Adaptive Security Appliance Release 8.2:) 

static (inside,outside) tcp 10.10.10.10 45080 2.2.2.2 5080 netmask 255.255.255.255static (inside,outside) udp 10.10.10.10 55070 3.3.3.3 5070 netmask 255.255.255.255
static (inside,outside) tcp 10.10.10.10 55070 3.3.3.3 5070 netmask 255.255.255.255
static (inside,outside) udp 10.10.10.10 45062 2.2.2.2 5062 netmask 255.255.255.255
static (inside,outside) tcp 10.10.10.10 55062 3.3.3.3 5062 netmask 255.255.255.255

(Cisco Adaptive Security Appliance Release 8.3:) 

nat (inside,outside) source static obj_host_2.2.2.2 obj_host_10.10.10.10 serviceobj_tcp_source_eq_5080 obj_tcp_source_eq_45080
nat (inside,outside) source static obj_host_3.3.3.3 obj_host_10.10.10.10 service
obj_tcp_source_eq_5070 obj_tcp_source_eq_55070
nat (inside,outside) source static obj_host_3.3.3.3 obj_host_10.10.10.10 service
obj_udp_source_eq_5070 obj_udp_source_eq_55070
nat (inside,outside) source static obj_host_2.2.2.2 obj_host_10.10.10.10 service
obj_tcp_source_eq_5062 obj_tcp_source_eq_45062
nat (inside,outside) source static obj_host_3.3.3.3 obj_host_10.10.10.10 service
obj_tcp_source_eq_5062 obj_tcp_source_eq_55062

The corresponding access lists for this configuration are provided below. Note that for each foreign domain that you federate with, you must add access lists similar to these access lists for the domain abc.com.

(Cisco Adaptive Security Appliance Release 8.2:) 

access-list ent_cup_to_abc extended permit tcp host 1.1.1.1 host 20.20.20.20 eq 5061access-list ent_abc_to_cup extended permit tcp host 20.20.20.20 host 10.10.10.10 eq 5061
access-list ent_secondcup_to_abc extended permit tcp host 2.2.2.2 host 20.20.20.20 eq 5061
access-list ent_thirdcup_to_abc extended permit tcp host 3.3.3.3 host 20.20.20.20 eq 5061
access-list ent_abc_to_secondcup extended permit tcp host 20.20.20.20 host 10.10.10.10 eq 45061
access-list ent_abc_to_thirdcup extended permit tcp host 20.20.20.20 host 10.10.10.10 eq 55061

(Cisco Adaptive Security Appliance Release 8.3:) 

access-list ent_cup_to_abc extended permit tcp host 1.1.1.1 host 20.20.20.20 eq 5061access-list ent_abc_to_cup extended permit tcp host 20.20.20.20 host 1.1.1.1 eq 5062
access-list ent_secondcup_to_abc extended permit tcp host 2.2.2.2 host 20.20.20.20 eq 5061
access-list ent_thirdcup_to_abc extended permit tcp host 3.3.3.3 host 20.20.20.20 eq 5061
access-list ent_abc_to_secondcup extended permit tcp host 20.20.20.20 host 2.2.2.2 eq 5062
access-list ent_abc_to_thirdcup extended permit tcp host 20.20.20.20 host 3.3.3.3 eq 5062

Associate each of your access lists with the a class map:
class-map ent_cup_to_abc
match access-list ent_cup_to_abc

class-map ent_abc_to_cup
match access-list ent_abc_to_cup

class-map ent_secondcup_to_abc
match access-list ent_secondcup_to_abc

class-map ent_thirdcup_to_abc
match access-list ent_thirdcup_to_abc

class-map ent_abc_to_secondcup
match access-list ent_abc_to_secondcup

class-map ent_abc_to_thirdcup
match access-list ent_abc_to_thirdcup

Update the global policy map for each class map you created. In this example, the TLS proxy instance for TLS connections initiated by IM and Presence is called "cup_to_foreign", and the TLS proxy instance for TLS connections initiated by a foreign domain is called "foreign_to_cup".
policy-map global_policy
class ent_cup_to_abc
inspect sip sip_inspect tls-proxy ent_cup_to_foreign

policy-map global_policy
class ent_abc_to_cup
inspect sip sip_inspect tls-proxy ent_foreign_to_cup

policy-map global_policy
class ent_secondcup_to_abc
inspect sip sip_inspect tls-proxy ent_cup_to_foreign

policy-map global_policy
class ent_thirdcup_to_abc
inspect sip sip_inspect tls-proxy ent_cup_to_foreign

policy-map global_policy
class ent_abc_to_secondcup
inspect sip sip_inspect tls-proxy ent_foreign_to_cup

policy-map global_policy
class ent_abc_to_thirdcup
inspect sip sip_inspect tls-proxy ent_foreign_to_cup

Sample access list configuration for XMPP federation


Note

The examples in this section are applicable to Cisco Adaptive Security Appliance Release 8.3.

Example 1: This example access list configuration allows from any address to any address on port 5269:

access-list ALLOW-ALL extended permit tcp any any eq 5269

Example 2: This example access list configuration allows from any address to any single XMPP federation node on port 5269. The following values are used in this example:

  • Private XMPP federation IM and Presence Release 9.x IP address = 1.1.1.1
  • XMPP federation listening port = 5269 
    access-list ALLOW-ALL extended permit tcp any host 1.1.1.1 eq 5269

Example 3: This example access list configuration allows from any address to specific XMPP federation nodes published in DNS.


Note

The public addresses are published in DNS, but the private addresses are configured in the access-list command.

The following values are used in this sample configuration:

• Private XMPP federation IM and Presence Release 9.x IP address = 1.1.1.1

• Private second IM and Presence Release 9.x IP address= 2.2.2.2

• Private third IM and Presence Release 9.x IP address = 3.3.3.3

• XMPP federation listening port = 5269

access-list ALLOW-ALL extended permit tcp any host 1.1.1.1 eq 5269access-list ALLOW-ALL extended permit tcp any host 2.2.2.2 eq 5269
access-list ALLOW-ALL extended permit tcp any host 3.3.3.3 eq 5269

Example 4: This example access list configuration allows only from a specific federated domain interface to specific XMPP federation nodes published in DNS.


Note

The public addresses are published in DNS, but the private addresses are configured in the access-list command.

The following values are used in this sample configuration:

  • Private XMPP federation IM and Presence Release 9.x IP address = 1.1.1.1
  • Private second IM and Presence Release 9.x IP address = 2.2.2.2
  • Private third IM and Presence Release 9.x IP address = 3.3.3.3
  • XMPP federation listening port = 5269
  • External interface of the foreign XMPP enterprise = 100.100.100.100 
    access-list ALLOW-ALL extended permit tcp host 100.100.100.100 host 1.1.1.1 eq 5269access-list ALLOW-ALL extended permit tcp host 100.100.100.100 host 2.2.2.2 eq 5269
access-list ALLOW-ALL extended permit tcp host 100.100.100.100 host 3.3.3.3 eq 5269

Sample NAT configuration for XMPP federation

Example 1: Single node with XMPP federation enabled

The following values are used in this sample configuration:

  • Public IM and Presence IP address = 10.10.10.10
  • Private XMPP federation IM and Presence Release 9.x IP address = 1.1.1.1
  • XMPP federation listening port = 5269 
    nat (inside,outside) source static obj_host_1.1.1.1 obj_host_10.10.10.10 serviceobj_udp_source_eq_5269 obj_udp_source_eq_5269
nat (inside,outside) source static obj_host_1.1.1.1 obj_host_10.10.10.10 service
obj_tcp_source_eq_5269 obj_tcp_source_eq_5269

Example 2: Multiple nodes with XMPP federation, each with a public IP address in DNS

The following values are used in this sample configuration:

  • Public IM and Presence IP addresses = 10.10.10.10, 20.20.20.20, 30.30.30.30
  • Private XMPP federation IM and Presence Release 9.x IP address = 1.1.1.1
  • Private second IM and Presence Release 9.x IP address = 2.2.2.2
  • Private third IM and Presence Release 9.x IP address = 3.3.3.3
  • XMPP federation listening port = 5269 
    nat (inside,outside) source static obj_host_1.1.1.1 obj_host_10.10.10.10 service
obj_udp_source_eq_5269 obj_udp_source_eq_5269
nat (inside,outside) source static obj_host_1.1.1.1 obj_host_10.10.10.10 service
obj_tcp_source_eq_5269 obj_tcp_source_eq_5269

nat (inside,outside) source static obj_host_2.2.2.2 obj_host_20.20.20.20 service
obj_udp_source_eq_5269 obj_udp_source_eq_5269
nat (inside,outside) source static obj_host_2.2.2.2 obj_host_20.20.20.20 service
obj_tcp_source_eq_5269 obj_tcp_source_eq_5269

nat (inside,outside) source static obj_host_3.3.3.3 obj_host_30.30.30.30 service
obj_udp_source_eq_5269 obj_udp_source_eq_5269
nat (inside,outside) source static obj_host_3.3.3.3 obj_host_30.30.30.30 service
obj_tcp_source_eq_5269 obj_tcp_source_eq_5269

Example 3: Multiple nodes with XMPP federation, but a single public IP address in DNS with arbitrary

ports published in DNS (PAT).

The following values are used in this sample configuration:

  • Public IM and Presence IP Address = 10.10.10.10
  • Private XMPP federation IM and Presence Release 9.x IP address = 1.1.1.1, port 5269
  • Private second IM and Presence Release 9.x IP address = 2.2.2.2, arbitrary port 25269
  • Private third IM and Presence Release 9.x IP address = 3.3.3.3, arbitrary port 35269 
    nat (inside,outside) source static obj_host_1.1.1.1 obj_host_10.10.10.10 serviceobj_udp_source_eq_5269 obj_udp_source_eq_5269
nat (inside,outside) source static obj_host_1.1.1.1 obj_host_10.10.10.10 service
obj_tcp_source_eq_5269 obj_tcp_source_eq_5269

nat (inside,outside) source static obj_host_2.2.2.2 obj_host_10.10.10.10 service
obj_udp_source_eq_5269 obj_udp_source_eq_25269
nat (inside,outside) source static obj_host_2.2.2.2 obj_host_10.10.10.10 service
obj_tcp_source_eq_5269 obj_tcp_source_eq_25269

nat (inside,outside) source static obj_host_3.3.3.3 obj_host_10.10.10.10 service
obj_udp_source_eq_5269 obj_udp_source_eq_35269
nat (inside,outside) source static obj_host_3.3.3.3 obj_host_10.10.10.10 service
obj_tcp_source_eq_5269 obj_tcp_source_eq_35269