Cisco Unified Communications Manager Dialed Number Analyzer Guide - Analyzing Cisco Unified Communications Manager Dial Plan Configuration [Cisco Unified Communications Manager (CallManager)]

Table Of Contents

Analyzing Cisco Unified Communications Manager Dial Plan Configuration

Database Synchronization

Disabling Database Synchronization

Simple Analysis by Using the Analyzer Window

Analysis by Using Phones

Finding a Phone

Choosing a Phone Line

Performing Analysis by Using Phones

Analysis by Using Gateways

Finding a Gateway

Choosing Gateway Endpoints and Entering Analysis Input

Choosing Cisco IOS MGCP / Cisco IOS SCCP Gateways

Choosing Non-IOS MGCP Gateways

Choosing Cisco IOS H.323 Gateways

Choosing Analog Access Gateways

Choosing Cisco VG248 Analog Phone Gateways

Performing Analysis by Using Gateways

Analysis by Using Trunks

Finding a Trunk

Choosing a Trunk

Performing Analysis by Using Trunks

Analysis by Using Multiple Analyzer

Using DNA Template to Create the CSV Data File for Multiple Analysis

Creating a Text-Based CSV File for Multiple Analysis

Multiple Analyzer CSV File Format

Uploading Input Files

Viewing CSV File Content

Deleting Uploaded CSV Data Files

Analyzing the Uploaded CSV Data File

Understanding Analysis Output

Analysis Results Examples

Example 1

Example 2

Example 3

Example 4

Example 5

Example 6

Example 7

Example 8

Results Summary

Call Flow Details

Translation Pattern

Route Pattern

Hunt Pilot

Directory Number

Device Information

Intercom DN Pattern

Alternate Matches

Dumping Digit Discard Instructions and Dialing Patterns

Viewing Dialed Number Analyzer Output Files

Trace Configuration Files

Related Topics

Analyzing Cisco Unified Communications Manager Dial Plan Configuration

Dialed Number Analyzer allows analysis of a configured Cisco Unified Communications Manager dial plan and provides details on the call flow of dialed digits. In the predeployment stage, you can use the tool to identify problems in a complex dial plan and fine tune the dial plan. You can also use the tool, after the dial plan is deployed, to identify real-time problems in the call flow of dialed digits.

Using Dialed Number Analyzer to analyze dial plans for a cluster of Cisco Unified Communications Manager systems and numerous devices may enable you to access the windows and enter data for analysis quickly. However, you may not be able to see any results when you perform the analysis. The following message displays:

Check if the DNA service is running. If the DNA service is running, then Dialed Number Analyzer is still initializing. Wait for a few minutes for Dialed Number Analyzer to initialize and try again.
Use the following topics to understand how to use the Service Control window and how to use Dialed Number Analyzer to analyze a Cisco Unified Communications Manager dial plan configuration:

•Database Synchronization

•Disabling Database Synchronization

•Simple Analysis by Using the Analyzer Window

•Analysis by Using Phones

•Analysis by Using Gateways

•Analysis by Using Trunks

•Analysis by Using Multiple Analyzer

•Understanding Analysis Output

•Dumping Digit Discard Instructions and Dialing Patterns

•Viewing Dialed Number Analyzer Output Files

•Trace Configuration Files

Database Synchronization

Dialed Number Analyzer replicates and uses the Cisco Unified Communications Manager database configuration to analyze calls in a dial plan. For this reason, make sure that Dialed Number Analyzer is in sync with the Cisco Unified Communications Manager database before you use the tool to perform any analysis. When changes are made to the Cisco Unified Communications Manager database, ensure that Dialed Number Analyzer reflects the changes to facilitate analysis by using current data. Examples of database changes include addition or deletion of devices, modification of route patterns, modification of gateway configuration settings, and so on.

You can enable Dialed Number Analyzer to receive database change notifications from Cisco Unified Communications Manager whenever database changes are made by using Cisco Unified Communications Manager Administration. Use the following steps to enable database change notifications to Dialed Number Analyzer.

Procedure

Step 1 In Dialed Number Analyzer, choose Service > Control Center.

The Control Center window displays. Database Synchronization displays under the Service Name-Database column.

Step 2 By default, the system enables Database Synchronization when Dialed Number Analyzer is installed. To keep database synchronization enabled, do not modify this setting.

Note Every time that you disable and enable database synchronization again, stop and start the Dialed Number Analyzer service to ensure that Dialed Number Analyzer is in sync with the Cisco Unified Communications Manager database. For instructions on starting the Dialed Number Analyzer service, see "Activating Dialed Number Analyzer Service" section on page 2-2.

Additional Information

See the "Related Topics" section.

Disabling Database Synchronization

You can choose not to notify Dialed Number Analyzer of changes that are made to the Cisco Unified Communications Manager database. Use the following steps to disable notification of database changes.

Procedure

Step 1 Choose Service > Control Center.

The Control Center window displays. Database Synchronization displays under the Service Name-Database column.

Step 2 Click Disable in the corresponding Action column.

Additional Information

See the "Related Topics" section.

Simple Analysis by Using the Analyzer Window

Simple analysis involves entering calling party and called party digits in Dialed Number Analyzer and choosing a calling search space for the analysis. Dialed Number Analyzer uses this calling search space and analyzes the dialed digits. You need not choose specific devices or provide any other input. Dialed Number Analyzer allows analysis of a route pattern, translation pattern, phone DN, or CTI Route Point.

Use this procedure only when you want to perform a quick analysis by entering dialed digits, selecting a calling search space, and entering the time and date of the calling party for analysis. Analysis results that are obtained by using this procedure do not display details like partitions, AAR calling search space details, and so on in the Calling Party Information section. Enter a calling party number that is not associated with any device that is configured in the Cisco Unified Communications Manager system, because you do not choose a specific device to dial digits.

You can enter numerals, the symbols # and *, and the alphabet letters A, a, B, b, C, c, D, and d in the Dialed Digits and Calling Party fields for analysis.

Access Dialed Number Analyzer and use the following procedure to perform a simple analysis.

Procedure

Step 1 Choose Analysis > Analyzer.

The Analyzer window displays. Enter input for the analyzer in this window.

Step 2 In the Calling Party field, enter the calling party digits. You do not have to associate this number with a device.

By default, 1000 displays in this field.

Step 3 In the Dialed Digits field, enter the digits that the calling party is to call.

Step 4 In the Pattern Analysis field, check the check box corresponding to SIP Analysis, if applicable, and choose Domain Route or IP Route.

Note If you want to perform a Session Initiation Protocol (SIP) analysis, make sure that you have configured a SIP Route Pattern in Cisco Unified Communications Manager Administration. For more details, refer to Cisco Unified Communications Manager Administration Guide.

Note You can perform SIP analysis only for phones that support SIP and for SIP trunks.

Step 5 From the Calling Search Space drop-down list box, choose the calling search space that is to be used to analyze the dialed digits. A calling search space comprises a collection of partitions that are searched to determine how a dialed number should be routed.

Step 6 From the Device Time Zone drop-down box, choose the time zone of the calling party. The time zone displays by default. This time zone represents the time zone information from the operating system of the server where Cisco Unified Communications Manager is installed.

Note The system uses this time zone for analysis only when the partition time zone setting is configured to Originating Device, in the Partition Configuration window in Cisco Unified Communications Manager.

Step 7 If Time of Day routing is enabled in Cisco Unified Communications Manager, choose the time zone, date, and time settings for analysis. If Time of Day routing is not enabled, leave the default settings.

The local time and date display by default in the Date and Time drop-down list boxes. This time and date represent the time and date information from the operating system of the server where Cisco Unified Communications Manager is installed.

•From the Time Zone drop-down list box, choose the time zone that Dialed Number Analyzer must use for analysis. Greenwich Standard Time (GMT) displays by default.

•From the Date drop-down list boxes, choose the year, month, and date that Dialed Number Analyzer must use for analysis.

•From the Time drop-down list boxes, choose the hour, minute, second, and millisecond that Dialed Number Analyzer must use for analysis.

Step 8 To start the analysis, click Do Analysis or to clear the fields and to reenter data, click Clear.

When you click Do Analysis, Dialed Number Analyzer analyzes the dialed digits and displays the results in a new window that is called DNA Analysis Output window. You can simply view the results or save the results in a file format on your PC for later use.

To save the results, use Steps 9, 10, 11, and 12; otherwise, skip to Step 13.

Step 9 To save the results, in the upper, right corner of the DNA Analysis Output window, click Save.

The File Download dialog displays.

Step 10 Click Save.

The Save As dialog displays. Browse to a location on your PC where you want to save the file.

Step 11 Click Save.

The system saves the results in an XML file on your PC. The saved file has the following naming convention:

dnaOutput_<callingparty>_<dialeddigits>.xml

where <callingparty> and <dialeddigits> specify the digits that are entered in the Calling Party and Dialed Digits fields, respectively.

Step 12 In the Download Complete dialog box, click Close to complete the Save As procedure.

Note For instructions on how to view the saved XML file in the browser, see the "Viewing Dialed Number Analyzer Output Files" section.

Step 13 Close the DNA Analysis Output window.

Additional Information

See the "Related Topics" section.

Analysis by Using Phones

Dialed Number Analyzer provides a Phones window where you can find and list phones by device name, description, directory number, calling search space device pool, device type, and call pickup group. You can find a phone and choose it as a calling device for the analysis that you want to perform. You can further choose a configured phone line (directory number) and use it as a calling party number.

Use the following topics to choose a phone and a phone line and to carry out analysis by using that phone line:

•Finding a Phone

•Choosing a Phone Line

•Performing Analysis by Using Phones

Finding a Phone

Dialed Number Analyzer allows you to locate a phone that you can use to analyze dialed digits from that phone. Use the following procedure to locate a phone.

Procedure

Step 1 Choose Analysis > Phones.

The Find and List Phones window displays.

Step 2 From the first Find Phones where drop-down list box, choose one of the following criteria:

•Device Name

•Description

•Directory Number

•Calling Search Space

•Device Pool

•Phone Type

•Call Pickup Group

•LSC Status

•Authentication String

•Device Protocol

•Security Profile

Note The criterion that you choose in this drop-down list box specifies how the list of phones displays. For example, if you choose Device Name, the Device Name column will display as the left column of the results list.

Note If you choose Directory Number, Calling Search Space, or Call Pickup Group, the options that are available in the database display.

Step 3 From the second Find Phones where drop-down list box, choose one of the following criteria:

•begins with

•contains

•ends with

•is exactly

•is not empty

•is empty

Note If you choose Calling Search Space, Device Pool, Device Type, or Call Pickup Group in the first field, you can choose a value from the drop-down list for this field.

Step 4 Specify how many items per window to display.

Step 5 Specify the appropriate search text, if applicable, and click Find.

Tip To find all phones, click Find without entering any search text or choose Device Name in the first Find Phones where drop-down list box and "is not empty" in the second Find Phones where drop-down list box.

A list of discovered phones that match the criteria displays.

This window also lists the total number of records that are displayed.

Step 6 To view the next set of discovered phones, click Next.

Step 7 From the list of records, click the record that you want to open.

The Phone Configuration window displays.

Step 8 Continue with "Choosing a Phone Line" section.

Additional Information

See the "Related Topics" section.

Choosing a Phone Line

After you have identified a phone to use for analysis, you need to choose a phone line that is configured in the system. Use the following procedure to choose a phone line as the calling party.

Procedure

Step 1 Find the phone that you want to use as a calling party device by using the procedure that the "Finding a Phone" section describes.

In the Phone Configuration window, under the Device Information column, information on the device displays. The address of the machine (MAC Address), the device pool to which the phone belongs, calling search space, AAR calling search space, Media Resource Group List details, and device time zone display.

Step 2 From the list of records, choose the phone line by clicking the Line radio button for the phone line that you require.

Note To return to the Find and List Phones window, in the upper, right corner of the window, choose Back to Find/List Phones from the drop-down list box and click Go.

Step 3 Continue with the procedure in "Performing Analysis by Using Phones" section.

Additional Information

See the "Related Topics" section.

Performing Analysis by Using Phones

After you have identified a phone and chosen a phone line, you can enter dialed digits for analysis. This section describes how to perform analysis by using the chosen phone line.

Procedure

Step 1 Find the phone that you want to use as a calling party device by using the procedure in the "Finding a Phone" section. The Phone Configuration window displays.

Note The time zone that is configured for the phone in Cisco Unified Communications Manager displays in the Device Time Zone field.

Step 2 Choose a phone line by using the procedure in the "Choosing a Phone Line" section.

Step 3 In the Dialed Digits field, enter the digits that are to be dialed from the chosen phone line.

Step 4 In the Pattern Analysis field, check the check box corresponding to SIP Analysis, if required, and choose Domain Route or IP Route.

Note If you want to perform a Session Initiation Protocol (SIP) analysis, make sure that you have configured a SIP Route Pattern in Cisco Unified Communications Manager Administration. For more details, refer to Cisco Unified Communications Manager Administration Guide.

Note You can perform SIP analysis only for phones that support SIP and for SIP trunks.

Step 5 If Time of Day routing is enabled in Cisco Unified Communications Manager, choose the time zone, date, and time settings for analysis. If Time of Day routing is not enabled, leave the default settings.

The local time and date display by default. This time and date represent the time zone information from the operating system of the server where Cisco Unified Communications Manager is installed.

•From the Time Zone drop-down list box, choose the time zone that Dialed Number Analyzer must use for analysis. Greenwich Median Time (GMT) displays by default.

•From the Date drop-down list boxes, choose the year, month, and date that Dialed Number Analyzer must use for analysis.

•From the Time drop-down list boxes, choose the hour, minute, second, and millisecond that Dialed Number Analyzer must use for analysis.

Step 6 Click Do Analysis.

Dialed Number Analyzer chooses the Calling Search Space of the chosen phone line and device for the analysis. The results display in a new window that is called the DNA Analysis Output window. You can simply view the results or save the results in a file format on your PC for later use.

To save the results, use Steps 7, 8, 9, and 10; otherwise, skip to Step 11.

Step 7 To save the results, in the upper, right corner of the window, click Save.

The File Download dialog displays.

Step 8 Click Save.

The Save As dialog displays. Browse to a location on your PC where you want to save the file.

Step 9 Click Save.

The results get saved in an XML file on your PC. The saved file has the following naming convention:

DialedNumberAnalyzerOutput_<dialeddigits>.xml

where <dialeddigits> specifies the dialed digits that are entered in the Dialed Digits field.

Step 10 To complete the Save As procedure, click Close in the Download Complete dialog box.

Note For instructions on how to view the saved XML file in the browser, see the "Viewing Dialed Number Analyzer Output Files" section.

Step 11 Close the DNA Analysis Output window.

Note You can use the DNA Analysis Output window to enter new data in the fields and perform another analysis by using the steps in the "Analysis by Using Phones" section.

Additional Information

See the "Related Topics" section.

Analysis by Using Gateways

Dialed Number Analyzer allows you to find and list gateways through which Cisco Unified Communications Manager receives inbound calls. From the list of gateways, you can choose gateway endpoints to dial digits and analyze the call flow of inbound calls to a Cisco Unified Communications Manager system. You can choose gateway endpoints that are configured in the Cisco Unified Communications Manager system.

Use the following topics to find gateways, choose gateway endpoints, enter dialed digits, and perform analysis:

•Finding a Gateway

•Choosing Gateway Endpoints and Entering Analysis Input

•Performing Analysis by Using Gateways

Finding a Gateway

You can find and list gateways by device name, description, DN/route pattern, device type, calling search space, route group, and device pool. This section describes the procedure to find gateways.

Procedure

Step 1 Choose Analysis > Gateways.

The Find and List Gateways window displays.

Step 2 From the first Find gateways where drop-down list box, choose one of the following criteria:

•Name

•Description

•DN/Route Pattern

•Calling Search Space Name

•Device Pool Name

•Route Group Name

•Gateway Type

Note The criterion that you choose in this drop-down list box specifies how the list of gateways displays. For example, if you choose Device Name, the Device Name column will display as the left column of the results list.

Note If you choose DN/Route Pattern, Calling Search Space, or Route Group, the options that are available in the database display.

Step 3 From the second Find gateways where drop-down list box, choose one of the following criteria:

•begins with

•contains

•is exactly

•ends with

•is not empty

•is empty

Note If you choose Calling Search Space, Device Pool, Route Group, or Device Type in the first field, you can choose a value from the drop-down list for this field.

Step 4 Specify how many items per window to display.

Step 5 Specify whether endpoints of gateways must be shown or hidden.

Step 6 Specify the appropriate search text, if applicable, and click Find.

Tip To find all gateways, click Find without entering any search text or choose Device Name in the first Find gateways where drop-down list box and "is not empty" in the second Find gateways where drop-down list box.

A list of gateways that matches the criteria displays. The information that displays differs for different gateway models.

This window also lists the total number of devices.

Step 7 To view the next set of discovered gateways, click Next.

Additional Information

See the "Related Topics" section.

Choosing Gateway Endpoints and Entering Analysis Input

After you find gateways that match your search criteria, you need to choose gateway endpoints and enter calling and called party information. Use the following steps to choose gateway endpoints.

Procedure

Step 1 Find the gateway that you want to use by using the procedure in the "Finding a Gateway" section.

Step 2 From the list of records that displays in the Find and List Gateways window, choose a gateway. Choose from the following types of gateways:

•Cisco IOS MGCP Gateway

•Non-IOS MGCP Gateway

•Cisco IOS H.323 Gateway

•Analog Access Gateway

•Cisco VG248 Analog Phone Gateway

•Cisco IOS SCCP Gateway

Depending on the type of gateway, different information displays.

Use the following topics to choose gateway endpoints for each gateway type:

•Choosing Cisco IOS MGCP / Cisco IOS SCCP Gateways

•Choosing Non-IOS MGCP Gateways

•Choosing Cisco IOS H.323 Gateways

•Choosing Analog Access Gateways

•Choosing Cisco VG248 Analog Phone Gateways

Choosing Cisco IOS MGCP / Cisco IOS SCCP Gateways

After you find gateways that match your search criteria, you can choose Cisco IOS MGCP gateway endpoints and Cisco IOS SCCP Gateways. The following list comprises Cisco IOS MGCP gateways:

•Cisco Voice Gateway 200 (VG200)

•Cisco IOS 269X, 26XX, 364X, 366X, 3725, 3745 gateways

•Cisco Catalyst 4000 Access Gateway Module

•Cisco Catalyst 4224 Voice Gateway Switch

•Communication Media Module

•Cisco IAD2400

Use the following steps to choose Cisco IOS MGCP/IOS SCCP gateway endpoints for analysis.

Procedure

Step 1 Find the gateway that you want to use by using the procedure in the "Finding a Gateway" section.

You can use two ways to access Cisco IOS MGCP/IOS SCCP gateway endpoints. You can directly access the Endpoint Identifiers from the Gateway Configuration window, or you can first see a list of all the configured endpoints in a new window and then choose one of them.

Use one of the following procedures.

Procedure 1

•From the list of records that displays in the Find and List Gateways window, click the gateway that you want to use.

–The Gateway Configuration window displays and lists the installed Voice Interface Cards and Endpoint Identifiers for each card. The endpoint identifiers represent configured ports for the chosen devices.

–From the list of endpoint identifiers, click the required endpoint. The appropriate window displays and shows gateway information and port information.

Note The time zone that is configured for the gateway in Cisco Unified Communications Manager displays in the Device Time Zone field.

–In the Calling Party field, the calling party number that is configured for this endpoint displays.

–In the Dialed Digits field, enter the digits to be dialed.

–In the Pattern Analysis field, check the check box corresponding to SIP Analysis, if required, and choose Domain Route or IP Route.

Note If you want to perform a Session Initiation Protocol (SIP) analysis, make sure that you have configured a SIP Route Pattern in Cisco Unified Communications Manager Administration. For more details, refer to Cisco Unified Communications Manager Administration Guide.

Note You can perform SIP analysis only for phones that support SIP and for SIP trunks.

–Choose the time zone, date, and time settings for analysis only if Time of Day routing is enabled in Cisco Unified Communications Manager. If not, leave the default settings.

Note The local time and date that represent the time and date information from the operating system of the server where Cisco Unified Communications Manager is installed display by default. You can choose time and date settings that differ from the Cisco Unified Communications Manager system time.

From the Time Zone drop-down list box, choose the time zone that Dialed Number Analyzer must use for analysis. Greenwich Median Time (GMT) displays by default.

From the Date drop-down list boxes, choose the year, month, and date that Dialed Number Analyzer must use for analysis.

From the Time drop-down list boxes, choose the hour, minute, second, and millisecond that Dialed Number Analyzer must use for analysis.

–Click Do Analysis to analyze the call flow for the dialed digits.

–Use the steps in "Performing Analysis by Using Gateways" section to complete the analysis procedure.

Procedure 2

•From the list of records that displays in the Find and List Gateways window, click the See Endpoints link in the record that you want to use.

The endpoints display in a new window. You can choose BRI and analog endpoints for analysis.

–From the list of endpoints in the new window, click the record that you want to use. The Gateway Configuration window displays and shows Gateway Information and Port Information.

Note The time zone that is configured for the endpoint in Cisco Unified Communications Manager displays in the Device Time Zone field.

–In the Calling Party field, the calling party number that is configured for this endpoint displays.

–In the Dialed Digits field, enter the digits to be dialed.

–In the Pattern Analysis field, check the check box corresponding to SIP Analysis, if required, and choose Domain Route or IP Route.

Note If you want to perform a Session Initiation Protocol (SIP) analysis, make sure that you have configured a SIP Route Pattern in Cisco Unified Communications Manager Administration. For more details, refer to Cisco Unified Communications Manager Administration Guide.

Note You can perform SIP analysis only for phones that support SIP and for SIP trunks.

–If Time of Day routing is enabled in Cisco Unified Communications Manager, choose the time zone, date, and time settings for analysis. If Time of Day routing is not enabled in Cisco Unified Communications Manager, leave the default settings.

Note The local time and date that represent the time and date information from the operating system of the server where Cisco Unified Communications Manager is installed display by default. You can choose time and date settings that differ from the Cisco Unified Communications Manager system time.

From the Time Zone drop-down list box, choose the time zone that Dialed Number Analyzer must use for analysis. Greenwich Median Time (GMT) displays by default.

From the Date drop-down list boxes, choose the year, month, and date that Dialed Number Analyzer must use for analysis.

From the Time drop-down list boxes, choose the hour, minute, second, and millisecond that Dialed Number Analyzer must use for analysis.

–To analyze the call flow for the dialed digits, click Do Analysis.

Use the steps in "Performing Analysis by Using Gateways" section to complete the analysis procedure.

Note Gateways include one or more configured ports with multiple endpoints. All ports for the chosen gateway display in the left frame of the Gateway Configuration window. Click another endpoint to go to that endpoint Gateway Configuration window.

Note In the upper, right corner or the lower, right corner of the Gateway Configuration window, choose Back to MGCP Configuration from the Related Links drop-down list box to return to the Gateway Configuration window. To return to the discovered gateways on the Find and List Gateways window, choose Back to Find/List Gateways.

Additional Information

See the "Related Topics" section.

Choosing Non-IOS MGCP Gateways

After you find gateways that match your search criteria, you can choose Non-IOS MGCP gateway endpoints. The following list comprises Non-IOS MGCP gateways:

•Cisco Catalyst 6000 E1 VoIP Gateway

•Cisco Catalyst 6000 T1 VoIP Gateway

•Cisco DT-24+ or DE-30+ Digital Access Trunk Gateway

Use the following procedure to choose Non-IOS MGCP gateway endpoints for analysis.

Procedure

Step 1 Find the gateway that you want to use by using the procedure in the "Finding a Gateway" section.

Step 2 From the list of records that displays in the Find and List Gateways window, click the Non-IOS MGCP gateway that you want to use.

The Gateway Configuration window displays and shows Device Information and Call Routing Information.

Note The time zone that is configured for the gateway in Cisco Unified Communications Manager displays in the Time Zone field.

Step 3 In the Calling Party field, the calling party number that is configured for this endpoint displays.

Step 4 In the Dialed Digits field, enter the digits to be dialed.

Step 5 In the Pattern Analysis field, check the check box corresponding to SIP Analysis, if required, and choose Domain Route or IP Route.

Note If you want to perform a Session Initiation Protocol (SIP) analysis, make sure that you have configured a SIP Route Pattern in Cisco Unified Communications Manager Administration. For more details, refer to Cisco Unified Communications Manager Administration Guide.

Note You can perform SIP analysis only for phones that support SIP and for SIP trunks.

Step 6 If Time of Day routing is enabled in Cisco Unified Communications Manager, choose the time zone, date, and time settings for analysis. If Time of Day routing is not enabled in Cisco Unified Communications Manager, leave the default settings.

Note The local time and date that represent the time and date information from the operating system of the server where Cisco Unified Communications Manager is installed display by default. You can choose time and date settings that differ from the Cisco Unified Communications Manager system time.

•From the Time Zone drop-down list box, choose the time zone that Dialed Number Analyzer must use for analysis. Greenwich Median Time (GMT) displays by default.

•From the Date drop-down list boxes, choose the year, month, and date that Dialed Number Analyzer must use for analysis.

•From the Time drop-down list boxes, choose the hour, minute, second, and millisecond that Dialed Number Analyzer must use for analysis.

Step 7 To analyze the call flow for the dialed digits, click Do Analysis.

Step 8 Follow the steps in "Performing Analysis by Using Gateways" section to complete the analysis procedure.

Note In the upper, right corner or the lower, right corner of the window, choose Back to Find/List Gateways from the Related Links drop-down list box to return to the discovered gateways on the Find and List Gateways window.

Additional Information

See the "Related Topics" section.

Choosing Cisco IOS H.323 Gateways

After you find a list of gateways that match your search criteria, you can choose Cisco IOS H.323 gateway endpoints. Use the following procedure to choose Cisco IOS H.323 gateway endpoints for analysis.

Procedure

Step 1 Find the gateway that you want to use by using the procedure in the "Finding a Gateway" section.

Step 2 From the list of records that displays in the Find and List Gateways window, click the Cisco IOS H.323 gateway that you want to use. The Gateway Configuration window displays and shows Device Information and Call Routing Information.

Note The time zone that is configured for the gateway in Cisco Unified Communications Manager displays in the Time Zone field.

Step 3 In the Calling Party field, the calling party number that is configured for this endpoint displays.

Step 4 In the Dialed Digits field, enter the digits to be dialed.

Step 5 In the Pattern Analysis field, check the check box corresponding to SIP Analysis, if required, and choose Domain Route or IP Route.

Note If you want to perform a Session Initiation Protocol (SIP) analysis, make sure that you have configured a SIP Route Pattern in Cisco Unified Communications Manager Administration. For more details, refer to Cisco Unified Communications Manager Administration Guide.

Note You can perform SIP analysis only for phones that support SIP and for SIP trunks.

Step 6 If Time of Day routing is enabled in Cisco Unified Communications Manager, choose the time zone, date, and time settings for analysis. If Time of Day routing is not enabled in Cisco Unified Communications Manager, leave the default settings.

Note The local time and date that represent the time and date information from the operating system of the server where Cisco Unified Communications Manager is installed display by default. You can choose time and date settings that differ from the Cisco Unified Communications Manager system time.

•From the Time Zone drop-down list box, choose the time zone that Dialed Number Analyzer must use for analysis. Greenwich Median Time (GMT) displays by default.

•From the Date drop-down list boxes, choose the year, month, and date that Dialed Number Analyzer must use for analysis.

•From the Time drop-down list boxes, choose the hour, minute, second, and millisecond that Dialed Number Analyzer must use for analysis.

Step 7 To analyze the call flow for the dialed digits, click Do Analysis.

Step 8 Use the steps in "Performing Analysis by Using Gateways" section to complete the analysis procedure.

Note In the upper, right corner or the lower, right corner of the window, click the Back to Find/List Gateways link to return to the discovered gateways on the Find and List Gateways window.

Additional Information

See the "Related Topics" section.

Choosing Analog Access Gateways

After you find a list of gateways that match your search criteria, you can choose Analog Access gateway endpoints. Analog Access gateways comprises of Cisco Catalyst 6000 24 Port FXS Gateways.

Use the following procedure to choose Analog Access gateway endpoints for analysis.

Procedure

Step 1 Find the gateway that you want to use by using the procedure in the "Finding a Gateway" section.

Step 2 From the list of records that displays in the Find and List Gateways window, click the Analog Access gateway that you want to use.

The Gateway Configuration window displays and shows all the ports that are configured for the gateway in the left frame.

Note The time zone that is configured for the gateway in Cisco Unified Communications Manager displays in the Time Zone field.

Step 3 Click the port that you require to make a call.

The Gateway Configuration window displays.

Step 4 In the Calling Party field, the calling party number that is configured for this endpoint displays.

Step 5 In the Dialed Digits field, enter the digits to be dialed.

Step 6 In the Pattern Analysis field, check the check box corresponding to SIP Analysis, if required, and choose Domain Route or IP Route.

Note If you want to perform a Session Initiation Protocol (SIP) analysis, make sure that you have configured a SIP Route Pattern in Cisco Unified Communications Manager Administration. For more details, refer to Cisco Unified Communications Manager Administration Guide.

Note You can perform SIP analysis only for phones that support SIP and for SIP trunks.

Note The outgoing SIP call must go through a SIP trunk.

Step 7 If Time of Day routing is enabled in Cisco Unified Communications Manager, choose the time zone, date, and time settings for analysis. If Time of Day routing is not enabled in Cisco Unified Communications Manager, leave the default settings.

Note The local time and date that represent the time and date information from the operating system of the server where Cisco Unified Communications Manager is installed display by default. You can choose time and date settings that differ from the Cisco Unified Communications Manager system time.

•From the Time Zone drop-down list box, choose the time zone that Dialed Number Analyzer must use for analysis. Greenwich Median Time (GMT) displays by default.

•From the Date drop-down list boxes, choose the year, month, and date that Dialed Number Analyzer must use for analysis.

•From the Time drop-down list boxes, choose the hour, minute, second, and millisecond that Dialed Number Analyzer must use for analysis.

Step 8 To analyze the call flow for the dialed digits, click Do Analysis.

Step 9 Use the steps in "Performing Analysis by Using Gateways" section to complete the analysis procedure.

Note In the upper, right corner or the lower, right corner of the window, click the Back to Find/List Gateways link to return to the discovered gateways on the Find and List Gateways window.

Additional Information

See the "Related Topics" section.

Choosing Cisco VG248 Analog Phone Gateways

After you find a list of gateways that matches your search criteria, you can choose Cisco VG248 Analog Phone gateway endpoints that are applicable to a Cisco VG248 Analog Phone gateway. Use the following procedure to choose Cisco VG248 Analog Phone gateway endpoints for analysis.

Procedure

Step 1 Find the gateway that you want to use by using the procedure in the "Finding a Gateway" section.

Step 2 From the list of records that displays in the Find and List Gateways window, click the gateway that you want to use.

The Gateway Configuration window displays and shows all ports that are configured for the chosen gateway.

Note The time zone that is configured for the gateway in Cisco Unified Communications Manager displays in the Time Zone field.

Step 3 Choose and click the port that you require.

If you click a port that is not configured, a message displays to inform you that the port is not configured.

If you choose a configured port, the Phone Line Selection window displays.

Step 4 From the list of records, click the Line radio button for the phone line that you require.

Step 5 In the Dialed Digits field, enter the digits to be dialed.

Step 6 In the Pattern Analysis field, check the check box corresponding to SIP Analysis, if required, and choose Domain Route or IP Route.

Note If you want to perform a Session Initiation Protocol (SIP) analysis, make sure that you have configured a SIP Route Pattern in Cisco Unified Communications Manager Administration. For more details, refer to Cisco Unified Communications Manager Administration Guide.

Note You can perform SIP analysis only for phones that support SIP and for SIP trunks.

Step 7 If Time of Day routing is enabled in Cisco Unified Communications Manager, choose the time zone, date, and time settings for analysis. If Time of Day routing is not enabled in Cisco Unified Communications Manager, leave the default settings.

Note The local time and date that represent the time and date information from the operating system of the server where Cisco Unified Communications Manager is installed display by default. You can choose time and date settings that differ from the Cisco Unified Communications Manager system time.

•From the Time Zone drop-down list box, choose the time zone that Dialed Number Analyzer must use for analysis. Greenwich Median Time (GMT) displays by default.

•From the Date drop-down list boxes, choose the year, month, and date that Dialed Number Analyzer must use for analysis.

•From the Time drop-down list boxes, choose the hour, minute, second, and millisecond that Dialed Number Analyzer must use for analysis.

Step 8 To analyze the call flow for the dialed digits, click Do Analysis.

Step 9 Use the steps in "Performing Analysis by Using Gateways" section to complete the analysis procedure.

Note In the upper, right corner or the lower, right corner of the window, click the Back to Find/List Gateways link to return to the discovered gateways on the Find and List Gateways window.

Additional Information

See the "Related Topics" section.

Performing Analysis by Using Gateways

After you have chosen a gateway endpoint and entered input for analysis, you can analyze the dialed digits. Use the following procedure to do the analysis.

Procedure

Step 1 Find the gateway that you want to use by using the procedure in the "Finding a Gateway" section.

Step 2 From the Find and List Gateways window, choose gateway endpoints. In the Gateway Configuration window, enter calling party or called party information by using the procedures in the following sections for different types of gateways:

•Choosing Cisco IOS MGCP / Cisco IOS SCCP Gateways

•Choosing Non-IOS MGCP Gateways

•Choosing Cisco IOS H.323 Gateways

•Choosing Analog Access Gateways

•Choosing Cisco VG248 Analog Phone Gateways

Step 3 If Time of Day routing is enabled in Cisco Unified Communications Manager, choose the time zone, date, and time settings for analysis. If Time of Day routing is not enabled in Cisco Unified Communications Manager, leave the default settings.

Note The local time and date that represent the time and date information from the operating system of the server where Cisco Unified Communications Manager is installed display by default. You can choose time and date settings that differ from the Cisco Unified Communications Manager system time.

•From the Time Zone drop-down list box, choose the time zone that Dialed Number Analyzer must use for analysis. Greenwich Median Time (GMT) displays by default.

•From the Date drop-down list boxes, choose the year, month, and date that Dialed Number Analyzer must use for analysis.

•From the Time drop-down list boxes, choose the hour, minute, second, and millisecond that Dialed Number Analyzer must use for analysis.

Step 4 Click Do Analysis.

Dialed Number Analyzer uses the Calling Search Space that is specified for the chosen endpoint and analyzes the dialed digits. The results display in a new window called the DNA Analysis Output window. You can simply view the results or save the results in a file format on your PC for later use.

To save the results, use Steps 5, 6, 7 and 8; otherwise skip to Step 9.

Step 5 To save the result, in the upper, right corner of the window, click Save.

The File Download dialog displays.

Step 6 Click Save.

The Save As dialog displays. Browse to a location on your PC where you want to save the file.

Step 7 Click Save.

The result gets saved as an XML file on your PC. The saved file has the following naming convention:

dnaOutput_<callingparty>_<dialeddigits>.xml

where <callingparty> and <dialeddigits> specify the calling party and the dialed digits that are entered in the Dialed Digits and Calling Party fields, respectively.

Step 8 In the Download Complete dialog box, click Close to complete the Save As procedure.

Note For instructions on how to view the saved XML file in the browser, see the "Viewing Dialed Number Analyzer Output Files" section.

Step 9 Close the DNA Analysis Output window.

Additional Information

See the "Related Topics" section.

Analysis by Using Trunks

Dialed Number Analyzer provides a Trunks window where you can find and list trunks through which inbound dialed digits can be analyzed. Use the following topics to find and choose a trunk and analyze dialed digits:

•Finding a Trunk

•Choosing a Trunk

•Performing Analysis by Using Trunks

Finding a Trunk

You can find and list trunks by device name, description, calling search space, route pattern, device pool, route group, and device type. This section describes the procedure to find trunks.

Procedure

Step 1 Choose Analysis > Trunks.

The Find and List Trunks window displays.

Step 2 From the first Find trunks where drop-down list box, choose one of the following criteria:

•Device Name

•Description

•Calling Search Space

•Route Pattern

•Device Pool

•Route Group

•Trunk Type

Note The criterion that you choose in this drop-down list box specifies how the list of gateways display. For example, if you choose Device Name, the Device Name column will display as the left column of the results list.

Note If you choose Route Pattern, Calling Search Space, or Route Group, the options that are available in the database display.

Step 3 From the second Find trunks where drop-down list box, choose one of the following criteria:

•begins with

•contains

•ends with

•is exactly

•is not empty

•is empty

Note If you choose Calling Search Space, Device Pool, Route Group, or Device Type in the first field, you can choose a value from the drop-down list for this field.

Step 4 Specify how many items per window to display.

Step 5 Specify the appropriate search text, if applicable, and click Find.

Tip To find all trunks, click Find without entering any search text or choose Device Name in the first Find trunks where drop-down list box and "is not empty" in the second Find trunks where drop-down list box.

A list of trunks that match the search criteria displays.

This window also lists the total number of records in this window.

Step 6 To view the next set of discovered trunks, click Next.

Additional Information

See the "Related Topics" section.

Choosing a Trunk

After you find the trunks that you require, you need to choose a trunk. Use the following procedure to choose a trunk. You can perform analysis for SIP trunks.

Procedure

Step 1 Find the trunk that you want to use for analysis by using the procedure in the "Finding a Trunk" section.

The Find and List Trunks window displays and shows trunk information.

Step 2 From the list of records, choose a trunk by clicking the required record.

The Trunk Configuration window displays.

Additional Information

See the "Related Topics" section.

Performing Analysis by Using Trunks

After you have identified and chosen a trunk, you need to enter input for analysis. Use the following procedure to enter input and perform analysis.

Procedure

Step 1 Find the trunk that you require by using the procedure in the "Finding a Trunk" section.

Step 2 From a list of discovered trunks, choose the trunk that you require by using the steps in the "Choosing a Trunk" section.

The Trunk Configuration window displays. Device and Call Routing information for the chosen trunk displays.

Note The time zone that is configured for the trunk in Cisco Unified Communications Manager displays in the Device Time Zone field.

Step 3 In the Calling Party field, enter the calling party number.

Step 4 In the Dialed Digits field, enter the digits to be dialed.

Step 5 In the Pattern Analysis field, check the check box corresponding to SIP Analysis, if required, and choose Domain Route or IP Route.

Note If you want to perform a Session Initiation Protocol (SIP) analysis, make sure that you have configured a SIP Route Pattern in Cisco Unified Communications Manager Administration. For more details, refer to Cisco Unified Communications Manager Administration Guide.

Note The outgoing SIP call must go through a SIP trunk.

Note You can perform SIP analysis only for phones that support SIP and for SIP trunks.

Step 6 If Time of Day routing is enabled in Cisco Unified Communications Manager, choose the time zone, date, and time settings for analysis. If Time of Day routing is not enabled in Cisco Unified Communications Manager, leave the default settings.

Note The local time and date that represent the time and date information from the operating system of the server where Cisco Unified Communications Manager is installed display by default. You can choose time and date settings that differ from the default Cisco Unified Communications Manager system time.

•From the Time Zone drop-down list box, choose the time zone that Dialed Number Analyzer must use for analysis. Greenwich Median Time (GMT) displays by default.

•From the Date drop-down list boxes, choose the year, month, and date that Dialed Number Analyzer must use for analysis.

•From the Time drop-down list boxes, choose the hour, minute, second, and millisecond that Dialed Number Analyzer must use for analysis.

Step 7 Click Do Analysis.

Dialed Number Analyzer uses the Calling Search Space that is specified for the trunk and analyzes the dialed digits. The results display in a new window that is called the DNA Analysis Output window. You can simply view the results or save the results in a file format on your PC for later use.

To save the results, use Steps 8, 9, 10, and 11; otherwise, skip to Step 12.

Step 8 To save the results, click Save in the upper, right corner of the window.

The File Download dialog displays.

Step 9 Click Save.

The Save As dialog displays. Browse to a location on your PC where you want to save the file.

Step 10 Click Save.

The result gets saved as an XML file on your PC. The saved file has the following naming convention:

dnaOutput_<callingparty>_<dialeddigits>.xml

where <callingparty> and <dialeddigits> specify the calling party and the dialed digits that are entered in the Dialed Digits and Calling Party field, respectively.

Step 11 To complete the Save As procedure, click Close in the Download Complete dialog box.

Note For instructions on how to view the saved XML file in the browser, see the "Viewing Dialed Number Analyzer Output Files" section.

Step 12 Close the DNA Analysis Output window.

Additional Information

See the "Related Topics" section.

Analysis by Using Multiple Analyzer

Multiple Dial Plan support feature allows you to perform multiple analysis and bulk testing of dial plans.

Dialed Number Analyzer (DNA) provides a Multiple Analyzer window where you can choose a CSV file that contains a list of data that is required for analysis. DNA will then process the CSV file and display the bulk output results.

During installation, DNATemplate.xlt installs as DNATemplate.zip on the server. Using this template, you can create a CSV file that contains multiple sets of calling party numbers with corresponding dialed digits, calling search spaces, device time zones, time zones, and date and time information.

You can upload or download these files by using the Multiple Analyzer window in DNA.

Use the following topics for creating a CSV input file by using the DNA template, uploading or downloading the input files, viewing the file contents, and analyzing the chosen input file.

•Using DNA Template to Create the CSV Data File for Multiple Analysis

•Creating a Text-Based CSV File for Multiple Analysis

•Uploading Input Files

•Viewing CSV File Content

•Deleting Uploaded CSV Data Files

•Analyzing the Uploaded CSV Data File

Using DNA Template to Create the CSV Data File for Multiple Analysis

To create a comma separated value (CSV) data file, use the DNATemplate.xlt file that is stored in the server during DNA installation.

You can download DNATemplate.zip file on the local machine from Upload/Download Input File. For more details, see"Creating a Text-Based CSV File for Multiple Analysis" section.

The zip file, when extracted, will give the DNATemplate.xlt file.

Use the following procedure to create the CSV data file by using the DNA template.

Procedure

Step 1 To open the DNA template, locate and double-click the DNATemplate.xlt file.

Step 2 When prompted, click Enable Macros to use the spreadsheet capabilities.

Step 3 To display the DNA options, click the DNA tab at the bottom of the spreadsheet.

Step 4 In the default values column, the fields Calling Party Number, Dialed Digits, Device Time Zone, Time Zone, Date for Analysis, and Time For Analysis display. Enter the corresponding default values for those fields that need not be changed for each record in the input file.

For example, if you want to analyze data for the date 2004-Dec-12, enter this value in the Date For Analysis default value field or choose this date from the popup calendar. When you export the information in the DNA template to CSV format, this date populates all the rows that are created.

Note To enter Device Time Zone and Time Zone values, you can either use the corresponding drop-down lists or enter the index number from the list on the TimeZone Index tab on DNATemplate.xlt.

Step 5 If required, enter information in the non-default fields in the corresponding columns.

Note If you want to associate a calling search space (CSS) with calling party and dialed digits, enter the correct CSS values, as configured on Cisco Unified Communications Manager administration. For more information on calling search space, refer to the Cisco Unified Communications Manager Administration Guide.

Note You can add a maximum of 500 entries in the CSV file for multiple analysis.

Step 6 Click Export to CSV Format. In the dialog box that displays, enter the location to save the CSV file.

Additional Information

See the "Related Topics" section.

Creating a Text-Based CSV File for Multiple Analysis

Instead of using the DNA template for data input for multiple analysis, you can create the comma separated values (CSV) file by using lines of ASCII text with commas separating the values.

Use the following procedure to create a CSV text file for multiple analysis.

Procedure

Step 1 Open a text editor or any application that allows you to export or create a CSV file.

Step 2 Use a separate line to enter the values for each analysis that you want to add to Cisco Unified Communications Manager.

•Specify all check box values with the Boolean values of True or False.

•Always include comma separators, even if a field is blank.

•An error occurs when you insert a CSV file with blank lines.

See "Multiple Analyzer CSV File Format" section for information about the CSV data file formats.

Step 3 Save the completed file.

Additional Information

See the "Related Topics" section.

Multiple Analyzer CSV File Format

The following sample shows the field length, and whether the field is optional or mandatory for a text-based CSV file for CTI ports and H.323 clients format.

Calling Party Number (Mandatory, Numeric, #, *, A, B, C, or D, up to 24 characters), Dialed Digits (Mandatory, Numeric, #, *, A, B, C, or D, up to 24 characters), Calling Search Space (Optional, Should be a valid CSS name configured in Cisco Unified Communications Manager Administrator), Device Time Zone (Optional, Numeric 1 to 53), Time Zone (Optional, Numeric 1 to 53), Date For Analysis (Optional, should be in the format YYYY-MMM-DD), Time For Analysis (Optional, should be in the format HH:MM:SS)

Use Table 3-1 to determine the index value (1 to 53) corresponding to the time zone for the Device Time Zone and Time Zone fields.

Table 3-1 Device Time Zone Index Values

Device Time Zone

Index Value

(GMT-12:00) Eniwetok, Kwajalein

1

(GMT-11:00) Midway Island, Samoa

2

(GMT-10:00) Hawaii

3

(GMT-09:00) Alaska

4

(GMT-08:00) Pacific Time (US & Canada); Tijuana

5

(GMT-07:00) Arizona

6

(GMT-07:00) Mountain Time (US & Canada)

7

(GMT-06:00) Central Time (US & Canada)

8

(GMT-06:00) Mexico City, Tegucigalpa

9

(GMT-06:00) Saskatchewan

10

(GMT-05:00) Bogata, Lima

11

(GMT-05:00) Eastern Time (US & Canada)

12

(GMT-05:00) Indiana (East)

13

(GMT-04:00) Atlantic Time (Canada)

14

(GMT-04:00) Caracas, La Paz

15

(GMT-03:30) Newfoundland

16

(GMT-03:00) Brasilia

17

(GMT-03:00) Buenos Aires, Georgetown

18

(GMT-02:00) Mid-Atlantic

19

(GMT-01:00) Azores, Cape Verde Is.

20

(GMT) Greenwich Mean Time; Dublin, Edinburgh, London, Lisbon

21

(GMT) Monrovia, Casablanca

22

(GMT+01:00) Amsterdam, Berlin, Stockholm, Rome, Bern, Vienna

23

(GMT+02:00) Athens, Helsinki, Istanbul

24

(GMT+02:00) Cairo

25

(GMT+02:00) Eastern Europe

26

(GMT+01:00) Brussels, Paris, Madrid, Copenhagen

27

(GMT+01:00) Prague, Warsaw, Budapest

28

(GMT+02:00) Harare, Pretoria

29

(GMT+02:00) Israel

30

(GMT+03:00) Baghdad, Kuwait, Nairobi, Riyadh

31

(GMT+03:00) Moscow, St. Petersburg, Kazan, Volgorad

32

(GMT+03:30) Tehran

33

(GMT+04:00) Baku, Yerevan, Tbilisi

34

(GMT+04:30) Kabul

35

(GMT+05:00) Islamabad, Karachi, Tashkent

36

(GMT+05:30) Bombay, Calcutta, Madras, New Delhi, Colombo

37

(GMT+06:00) Almaty, Dhaka

38

(GMT+07:00) Bangkok, Jakarta, Hanoi

39

(GMT+08:00) Beijing, Chongqing, Urumqi

40

(GMT+08:00) Hong Kong, Perth, Singapore, Taipei

41

(GMT+09:00) Tokyo, Osaka, Sapporo, Seoul, Yakutsk

42

(GMT+09:30) Adelaide

43

(GMT+09:30) Darwin

44

(GMT+10:00) Brisbane

45

(GMT+10:00) Melbourne, Sydney

46

(GMT+10:00) Guam, Port Moresby, Vladivostok

47

(GMT+10:00) Hobart

48

(GMT+11:00) Magadan, Solomon Is., New Caledonia

49

(GMT+12:00) Fiji, Kamchatka, Marshall Is.

50

(GMT+12:00) Wellington, Auckland

51

(GMT+04:00) Abu Dhabi, Muscat

52

(GMT+05:00) Ekaterinburg

53

Sample 1
1000,20,,4,37,2005-Jun-9,3:00:59,
1000,30,,4,37,2005-Jun-9,3:00:59,
1000,40,CSS1,4,37,2005-Jun-9,3:00:59,
Note Make sure that you enter a comma at the end of each line of input data.

Additional Information

See the "Related Topics" section.

Uploading Input Files

To allow DNA access to the CSV data file, you must upload the data file that was created in the previous procedure to the Cisco Unified Communications Manager publisher database server.

Use the following procedure to upload a CSV data file.

Procedure

Step 1 Choose Analysis > Multiple Analyzer.

Step 2 Select Upload/Download Input Files from the drop-down list box in the upper, right corner of the window and click Go.

Step 3 The Upload/Download Input Files window displays.

Step 4 To upload input files, enter the directory where the CSV file is stored or use the Browse button to choose the directory.

Step 5 Click Upload File. The CSV file uploads to the server.

Note To download the DNA template to create a CSV data file, click the Download link below Download Template Files and save the file to your local machine.

Additional Information

See the "Related Topics" section.

Viewing CSV File Content

You can view the content of the CSV file before doing the analysis.

Use the following procedure to view the CSV file content.

Step 1 Choose Analysis > Multiple Analyzer.

Step 2 In the File Name field, choose the CSV file from the drop-down list box. This box should list all the files that have been uploaded to the Cisco Unified Communications Manager server by using "Creating a Text-Based CSV File for Multiple Analysis" section.

Step 3 Click View File Contents.

Step 4 The information in the chosen CSV file displays in a separate window.

Additional Information

See the "Related Topics" section.

Deleting Uploaded CSV Data Files

Use the following procedure to delete any uploaded CSV files.

Procedure

Step 1 Choose Analysis > Multiple Analyzer.

Step 2 Select Upload/Download Input Files from the drop-down list box in the upper, right corner of the window and click Go.

Step 3 The Upload/Download Input Files window displays.

Step 4 Click Delete Uploaded Files in the upper, right corner of the window.

Step 5 The View/Delete Uploaded Files window displays a list of all the CSV files that are uploaded on the server.

Note You can search for a particular file by entering criteria in the text box on the top of the window and clicking Find.

Step 6 Choose the file(s) that you want to delete from the list by checking the check box next to the file name.

Step 7 Click Delete Selected.

Step 8 To delete the chosen file(s), click OK in the confirmation dialog box. To cancel file deletion, click Cancel.

Additional Information

See the "Related Topics" section.

Analyzing the Uploaded CSV Data File

Multiple analyses for the different sets of input provide a consolidated result that consists of Calling Party Number, corresponding Dialed Digits, CSS, and final analysis result (Route/Block), in a row-by-row fashion for each set of input.

Use the following procedure to analyze the uploaded CSV data file.

Procedure

Step 1 Choose Analysis > Multiple Analyzer.

Step 2 From the File Name drop-down list box, chose the CSV file that you want to analyze.

Step 3 Click Do Analysis. The analysis results display in a separate window.

Caution Multiple analyses consume enormous CPU resources and will severely impact the database performance. Perform multiple analyses only during times of least traffic on the network.

Note You can perform only one multiple analysis at a time.

Step 4 To view the detailed analysis for each row of results, click Details.

Note The system stores files at file list activelog /tomcat/logs/dna/Results.

Step 5 To save the results file in the CSV format, click Save.

Additional Information

See the "Related Topics" section.

Understanding Analysis Output

The results of analysis that you perform contain information on the dialed digits call flow. This section provides two examples of analysis results that were obtained by using Dialed Number Analyzer. Each example shows results that were obtained by using different types of inputs and Cisco Unified Communications Manager configuration data. This section also describes each value in the analysis output.

Three sections provide the description of the results: Results Summary, Call Flow, and Alternate Matches. Use the following topics to understand the information in the analysis output:

•Analysis Results Examples

•Results Summary

•Call Flow Details

•Alternate Matches

Analysis Results Examples

This section provides a few examples to help you understand the results that you could obtain with different inputs by using Dialed Number Analyzer. The Results Summary, Call Flow, and Alternate Matches sections describe all the values that could display in analysis results. The sample results may include only values that result from the type of input that is provided to Dialed Number Analyzer.

Example 1

This example assumes the following setup in Cisco Unified Communications Manager:

Phone—1360064 in partition 'DallasPartition'

Line Calling Search Space—ALL (ALL CSS has DallasPartition and SJPartition)

Route Filter—RF-SJ (LONG-DISTANCE-DIRECT-DIAL EXISTS AND AREA-CODE == 408). This route pattern selects RouteList 'RL1'. RL1 uses RG1 and RG2.

RG1 configuration includes an intercluster trunk as 10.77.31.206, with route group level calling and called party transformations. RG2 configuration includes an intercluster trunk 10.77.31.231, with QSIG tunneled protocol.

Route Pattern—9.@ in partition 'SJPartition', where:

•Offnet Pattern (Outside Dial Tone) is checked.

•Require Forced Authorization Code is checked.

•Require Client Matter Code is checked.

•Authorization Level equals 155.

Associate the route pattern with the RL1 route list and route filter RF-SJ.

Configure the intercluster Trunk 10.77.31.206 as follows:

•Tunneled Protocol—QSIG.

•Call Classification—Use System Default.

•Inbound Fast Start—Disabled.

•Outbound Fast Start—Enabled.

•Codec For Outbound FastStart—G711 mu-law 64k.

Configure the intercluster Trunk 10.77.31.231 as follows:

•Tunneled Protocol—QSIG.

•Call Classification—Use System Default.

•Inbound Fast Start—Disabled.

•Outbound Fast Start—Disabled.

Use the following procedure to run this example:

Procedure

Step 1 Access Dialed Number Analyzer and choose Analysis > Analyzer.

Step 2 In the Analyzer window, enter 1360064 in the Calling Party field.

Step 3 In the Dialed Digits field, enter 914089027872.

Step 4 From the Calling Search Space drop-down list box, choose ALL.

Step 5 Leave the default values in the Device Time Zone field, Cisco Unified Communications Manager system Time Zone, Date, and Time fields.

Step 6 Click Do Analysis.

The results display in a new window that is called Dialed Number Analyzer Results window. The Results Summary section expands and shows summary information.

Step 7 To expand all the nodes in the window and view all values, click Expand All or to close all the nodes in the window, click Collapse All.

Note When the Dialed Number Analyzer Results window first displays, both Expand All and Collapse All buttons are enabled.

See Example 3-1 for the results.

Additional Information

See the "Related Topics" section.

Example 3-1 Analysis Results for Example 1
Results Summary 
Calling Party Information 
Calling Party = 1360064 
Partition = 
Device CSS = 
Line CSS = ALL 
AAR Group Name = 
AARCSS = 
Dialed Digits = 914089027872 
Match Result = RouteThisPattern 
Matched Pattern Information 
Pattern = 9.@ 
Partition = SJPartition 
Time Schedule = 
Called Party Number = 914089027872 
Time Zone = (GMT+05:30) Bombay, Calcutta, Madras, New Delhi, Colombo 
End Device = RL1 
CallClassification = OffNet 
InterDigit Timeout = NO 
Provide Outside Dial Tone) 
PlayedAfter = 9 
Call Flow 
Route Pattern :Pattern= 9.@ 
Positional Match List = 9:1:408:902:7872 
DialPlan = North American Numbering Plan 
Route Filter 
   Filter Name = RF-SJ 
   Filter Clause = (LONG-DISTANCE-DIRECT-DIAL EXISTS AND AREA-CODE == 408) 
Require Forced Authorization Code = Yes 
Authorization Level = 155 
Require Client Matter Code = Yes 
Network Location = OffNet 
PreTransform Calling Party Number = 1360064 
PreTransform Called Party Number = 914089027872 
Calling Party Transformations 
   External Phone Number Mask = NO 
   Calling Party Mask = 
   Prefix = 
   CallingLineId Presentation = Default 
   CallingName Presentation = Default 
   Calling Party Number = 1360064 
ConnectedParty Transformations 
   ConnectedLineId Presentation = Default 
   ConnectedName Presentation = Default 
Called Party Transformations 
   Called Party Mask = 
   Discard Digits Instruction = 
   Prefix = 
   Called Number = 914089027872 
Route List :Route List Name= RL1 
RouteGroup :RouteGroup Name= RG1 
   PreTransform Calling Party Number = 1360064 
   PreTransform Called Party Number = 914089027872 
   Calling Party Transformations 
      External Phone Number Mask = Default 
      Calling Party Mask = 
      Prefix = 
      Calling Party Number = 1360064 
   Called Party Transformations 
      Called Party Mask = 
      Discard Digits Instructions = 
      Prefix = 
      Called Number = 914089027872 
   Device :Type= InterClusterTrunk-NonGatekeeperControlled 
      End Device Name = 10.77.31.206 
      PortNumber = 0 
      Device Status = UnKnown 
      AAR Group Name = 
      AAR Calling Search Space = 
      AAR Prefix Digits = 
      Inbound Fast Start = Disabled 
      Outbound Fast Start = Enabled 
      Codec For Outbound FastStart = G711 u-law 64K 
      Call Classification = Use System Default 
      Tunneled Protocol = QSIG 
      Calling Party Transformations 
         PreTransform Calling Party Number = 1360064 
         Calling Party Selection = Originator 
         Calling Party Presentation = Default 
         CallerID DN = 
         Calling Party Number = 1360064 
RouteGroup :RouteGroup Name= RG2 
   PreTransform Calling Party Number = 1360064 
   PreTransform Called Party Number = 914089027872 
   Calling Party Transformations 
      External Phone Number Mask = Default 
      Calling Party Mask = 
      Prefix = 
      Calling Party Number = 1360064 
   Called Party Transformations 
      Called Party Mask = 
      Discard Digits Instructions = 
      Prefix = 
      Called Number = 914089027872 
   Device :Type= InterClusterTrunk-NonGatekeeperControlled 
      End Device Name = 10.77.31.231 
      PortNumber = 0 
      Device Status = UnKnown
      Automated Alternate Routing (AAR)
         AAR Group Name = 
         AAR Calling Search Space = 
         AAR VoiceMail Status = Disabled 
         AAR Destination Mask = 
         AAR Prefix Digits =
      Inbound Fast Start = Disabled 
      Outbound Fast Start = Disabled 
      Call Classification = Use System Default 
      Tunneled Protocol = QSIG 
      Calling Party Transformations 
         PreTransform Calling Party Number = 1360064 
         Calling Party Selection = Originator 
         Calling Party Presentation = Default 
         CallerID DN = 
         Calling Party Number = 1360064 
Alternate Matches 
Note: Information Not Available
Additional Information

See the "Related Topics" section.

Example 2

This example assumes the following setup in Cisco Unified Communications Manager:

Route Pattern—9.@ in partition 'SJPartition'

Route Filter—RF-SJ (LONG-DISTANCE-DIRECT-DIAL EXISTS AND AREA-CODE == 408). This route pattern selects RouteList 'RL1'. RL1 uses RG1.

RG1 configuration includes an intercluster trunk as 10.77.31.206, with route group level calling and called party transformations. Configure 10.77.31.206 gateway with CSS-AALL. (ALL CSS has DallasPartition and SJPartition.)

RG2 configuration includes an intercluster trunk 10.77.31.231, with QSIG tunneled protocol.

Route Pattern—9.@ in partition 'SJPartition', where

•Offnet Pattern (Outside Dial Tone) is checked.

•Require Forced Authorization Code is checked.

•Require Client Matter Code is checked.

•Authorization Level = 155

Associate the route pattern with the RL1 route list and route filter RF-SJ.

Configure the intercluster Trunk 10.77.31.206 as follows:

•Tunneled Protocol—QSIG.

•Call Classification—Use System Default.

•InBound Fast Start—Disabled.

•OutBound Fast Start—Enabled.

•Codec For Outbound Fast Start—G711 mu-law 64k.

Configure the intercluster Trunk 10.77.31.231 as follows:

•Tunneled Protocol—QSIG.

•Call Classification—Use System Default.

•InBound Fast Start—Disabled.

•OutBound Fast Start—Disabled.

Configure a phone with DN 254564. Ensure the phone's Ignore Presentation Indicators (internal calls only) check box is checked. Translation pattern 972813XXXX exists in partition 'DallasPartition' with Called Party Transformations configured with DN 254564.

Provide Outside dial tone does not get checked for the translation pattern.

Use the following procedure to run this example:

Procedure

Step 1 Access Dialed Number Analyzer and choose Analysis > Trunks.

Step 2 Find a list of trunks that are configured by using the procedure in the "Finding a Trunk" section.

Step 3 From the list of records that displays in the Find and List Trunks window, choose gateway 10.77.31.206. The Trunk Information window displays.

Step 4 In the Trunk Information window, enter 9728130064 in the Calling Party field.

Step 5 In the Dialed Digits field, enter 9728135054.

Step 6 Leave the default values in the Time Zone, Date, and Time drop-down list boxes.

Step 7 Click Do Analysis.

The results display in a new window that is called Dialed Number Analyzer Results window. The Results Summary section expands and shows summary information.

Step 8 To expand all the nodes in the window and view all values, click Expand All or to close all the nodes in the window, click Collapse All.

Note When the Dialed Number Analyzer Results window first displays, both Expand All and Collapse All buttons are enabled.

See Example 3-2 for the results.

Additional Information

See the "Related Topics" section.

Example 3-2 Analysis Results for Example 2
Results Summary 
Calling Party Information 
Calling Party = 9728130064 
Partition = 
Device CSS = ALL 
Line CSS = 
AAR Group Name = 
AARCSS = 
Dialed Digits = 9728135054 
Match Result = RouteThisPattern 
Matched Pattern Information 
Pattern = 254564 
Partition = 
Time Schedule = 
Called Party Number = 254564 
Time Zone = 
InterDigit Timeout = NO 
Provide Outside Dial Tone = NO 
Call Flow 
TranslationPattern :Pattern= 972813XXXX 
Positional Match List = 254564 
DialPlan = North American Numbering Plan 
Route Filter 
   Filter Name = 
   Filter Clause = 
PreTransform Calling Party Number = 9728130064 
PreTransform Called Party Number = 9728135054 
Calling Party Transformations 
   External Phone Number Mask = NO 
   Calling Party Mask = 
   Prefix = 
   CallingLineId Presentation = Default 
   CallingName Presentation = Default 
   Calling Party Number = 9728130064 
ConnectedParty Transformations 
   ConnectedLineId Presentation = Default 
   ConnectedName Presentation = Default 
Called Party Transformations 
   Called Party Mask = 254564 
   Discard Digits Instruction = 
   Prefix = 
   Called Number = 254564 
Directory Number :DN= 254564 
Partition = 
Call Classification = OnNet 
Forwarding Information 
   ForwardAll : DN = VoiceMail = No CSS = 
   ForwardBusy 
      Internal : DN = VoiceMail = No CSS = 
      External : DN = VoiceMail = No CSS = 
   ForwardNoAnswer 
      Internal : DN = VoiceMail = No CSS = 
      External : DN = VoiceMail = No CSS = 
   ForwardNoCoverage 
      Internal : DN = VoiceMail = No CSS = 
      External : DN = VoiceMail = No CSS = 
   CFDF : DN = VoiceMail = No CSS = 
   Pickup Group Number = 
Device :Type= Cisco 7960 
Device Status = UnKnown 
Device Name = SEP487698944444 
Ignore Presentation Indicators = Disabled 
Logged Into Hunt Groups = Enabled 
Alerting Name = 
Dual Mode = Disabled 
Do Not Disturb(DND) 
DND Status = Disabled 
DND Option = Ringer Off 
DND Incoming Call Alert = 
DND Timeout (minutes) = 0 
Automated Alternate Routing (AAR) 
AAR Group Name = 
AAR Calling Search Space = 
AAR VoiceMail Status = Disabled 
AAR Destination Mask = 
AAR Prefix Digits =
Alternate Matches 
Note: Information Not Available
Additional Information

See the "Related Topics" section.

Example 3

This example shows how hunt pilot information displays in the analysis results if your dial plan configuration includes hunt lists. This sample assumes the following setup in Cisco Unified Communications Manager:

Hunt pilot—9043.

10 voice mail ports from 90431 through 90440 get configured.

Line Group VMLG includes the 10 ports.

Hunt List VMHL includes Line Group VMLG.

Forward Hunt No Answer setup follows:

Use Personal Preference is checked.

Destination = 30129.

CSS = None.

Forward Hunt Busy setup follows:

Use Personal Preference is checked

Destination = 30139

CSS = None

Maximum Hunt Timer = 5

Use the following procedure to run this example:

Procedure

Step 1 Access Dialed Number Analyzer and choose Analysis > Analyzer.

The Analyzer window displays.

Step 2 In the Calling Party field, enter a calling party number (1000 displays by default).

Step 3 In the Dialed Digits field, enter 9043.

Step 4 In the Device Time Zone field, leave the default values.

The local time and date that represent the time and date information from the operating system of the server where Cisco Unified Communications Manager is installed display by default. You can choose time and date settings that differ from the Cisco Unified Communications Manager system time.

Step 5 In the Time Zone, Date, and Time fields, leave the default settings.

Step 6 Click Do Analysis.

Step 7 The results display in a new window that is called Dialed Number Analyzer Results window. The Results Summary section expands and shows summary information.

Step 8 Click Expand All to expand all the nodes in the window and view all values or click Collapse All to close all the nodes in the window.

Note When the Dialed Number Analyzer Results window first displays, both Expand All and Collapse All buttons are enabled.

See Example 3-3 for the results. The results section details only the Call Flow section that includes Hunt List information.

Additional Information

See the "Related Topics" section.

Example 3-3 Analysis Results for Example 3
Results Summary 
Calling Party Information 
Calling Party = 1000 
Partition = 
Device CSS = 
Line CSS = 
AAR Group Name = 
AARCSS = 
Dialed Digits = 9043 
Match Result = RouteThisPattern 
Matched Pattern Information 
Pattern = 9043 
Partition = 
Time Schedule = 
Called Party Number = 9043 
Time Zone = 
End Device = VMHL 
Call Classification = OffNet 
InterDigit Timeout = YES 
Provide Outside Dial Tone = NO 
Call Flow 
Hunt Pilot :Pattern= 9043 
Positional Match List = 9043 
DialPlan = North American Numbering Plan 
Route Filter 
   Filter Name = 
   Filter Clause = 
Hunt Forward Settings 
   Forward Hunt No Answer 
      Use Personal Preferences = Yes 
      Destination = 30129 
      Calling Search Space = 
   Forward Hunt Busy 
      Use Personal Preferences = Yes 
      Destination = 30139 
      Calling Search Space = 
   Maximun Hunt Timer = 5 
Network Location = OffNet 
PreTransform Calling Party Number = 1000 
PreTransform Called Party Number = 9043 
Calling Party Transformations 
   External Phone Number Mask = NO 
   Calling Party Mask = 
   Prefix = 
   CallingLineId Presentation = Default 
   CallingName Presentation = Default 
   Calling Party Number = 1000 
ConnectedParty Transformations 
   ConnectedLineId Presentation = Default 
   ConnectedName Presentation = Default 
Called Party Transformations 
   Called Party Mask = 
   Discard Digits Instruction = 
   Prefix = 
   Called Number = 9043 
Hunt List :HuntListName= VMHL 
Line Group :LineGroupName= VMLG 
   Directory Number :DN= 90431 
      Partition = 
      Call Classification = OnNet 
      Device :Type= Cisco Voice Mail Port 
         Device Status = UnKnown 
         Device Name = CiscoUM1-VI1 
         Ignore Presentation Indicators = Disabled 
         Alerting Name =
      Automated Alternate Routing (AAR) 
         AAR Group Name = 
         AAR Calling Search Space = 
         AAR VoiceMail Status = Disabled 
         AAR Destination Mask = 
         AAR Prefix Digits =
   + Directory Number :DN= 90432 
   + Directory Number :DN= 90433 
   + Directory Number :DN= 90434 
   + Directory Number :DN= 90435 
   + Directory Number :DN= 90436 
   + Directory Number :DN= 90437 
   + Directory Number :DN= 90438 
   + Directory Number :DN= 90439 
   + Directory Number :DN= 90440 
Alternate Matches 
Note: Information Not Available 
Note The last section of the preceding sample shows detailed Directory Number information for the first port. Similar information displays for the remaining ports that are configured.

Additional Information

See the "Related Topics" section.

Example 4

This example shows how time-of-day settings information displays in the analysis results when the time zone setting for a phone is set to a specific time zone in Cisco Unified Communications Manager Administration. In this example, the analysis uses the time zone, date, and time settings that the Analysis > Analyzer window specifies. This sample assumes the following setup in Cisco Unified Communications Manager:

Time Period—DNATimePeriod1

Configure DNATimePeriod1 as follows:

•Start Time = 9.00

•End Time = 12.00

•Repeat Every = Year On: Jun 15

Time Schedule—DNATimeSchedule1

Configure DNATimeSchedule1 to DNATimePeriod1.

Partition—DNAPartition1

Configure DNAPartition1 to DNATimeSchedule1.

Ensure DNAPartition1 configuration is as follows:

•Time Zone = Specific Time Zone, (GMT+5.30) Bombay, Calcutta, Madras, New Delhi, Colombo

Configure DNACSS1 with DNAPartition1.

Phone—Configure an SEP000000036201 with DN 36201.

Partition for the SEP000000036201 phone = DNAPartition1

Use the following procedure to run this example:

Procedure

Step 1 Access Dialed Number Analyzer and choose Analysis > Analyzer.

The Analyzer window displays.

Step 2 In the Calling Party field, enter a calling party number (1000 displays by default).

Step 3 In the Dialed Digits field, enter 36201.

Step 4 From the Calling Search Space drop-down list, choose DNACSS1.

Step 5 From the Time Zone drop-down list, choose a specific time zone, (GMT+5.30) Bombay, Calcutta, Madras, New Delhi, Colombo.

Step 6 From the Date drop-down list boxes, choose 2004, Jun, and 15 as the Cisco Unified Communications Manager system date settings.

Step 7 From the Time drop-down list boxes, choose 11:30:0:0 as the Cisco Unified Communications Manager system time settings.

Step 8 Click Do Analysis.

Step 9 The results display in a new window that is called Dialed Number Analyzer Results window. The Results Summary section expands and shows summary information.

Step 10 To expand all the nodes in the window and view all values, click Expand All or to close all the nodes in the window, click Collapse All.

Note When the Dialed Number Analyzer Results window first displays, both Expand All and Collapse All buttons are enabled.

See Example 3-4 for the results.

Additional Information

See the "Related Topics" section.

Example 3-4 Analysis Results for Example 4
Results Summary 
Calling Party Information 
Calling Party = 1000 
Partition = 
Device CSS = 
Line CSS = DNACSS1 
AAR Group Name = 
AARCSS = 
Dialed Digits = 36201 
Match Result = RouteThisPattern 
Matched Pattern Information 
Pattern = 36201 
Partition = DNAPartition1 
Time Schedule = DNATimeSchedule1 
Called Party Number = 36201 
Time Zone = (GMT+05:30) Bombay, Calcutta, Madras, New Delhi, Colombo 
InterDigit Timeout = NO 
Provide Outside Dial Tone = NO 
Call Flow 
Directory Number :DN= 36201 
Partition = DNAPartition1 
Call Classification = OnNet 
Forwarding Information 
   ForwardAll : DN = VoiceMail = No CSS = 
   ForwardBusy 
      Internal : DN = VoiceMail = No CSS = 
      External : DN = VoiceMail = No CSS = 
   ForwardNoAnswer 
      Internal : DN = VoiceMail = No CSS = 
      External : DN = VoiceMail = No CSS = 
   ForwardNoCoverage 
      Internal : DN = VoiceMail = No CSS = 
      External : DN = VoiceMail = No CSS = 
   CFDF : DN = VoiceMail = No CSS = 
   Pickup Group Number = 
Device :Type= Cisco 7960 
   Device Status = UnKnown 
   Device Name = SEP000000036201 
   Ignore Presentation Indicators = Disabled 
   Alerting Name = 
   Do Not Disturb(DND) 
     DND Status = Disabled 
     DND Option = Ringer Off 
     DND Incoming Call Alert = 
     DND Timeout (minutes) = 0 
   Automated Alternate Routing (AAR) 
     AAR Group Name = 
     AAR Calling Search Space = 
     AAR VoiceMail Status = Disabled 
     AAR Destination Mask = 
     AAR Prefix Digits =
Alternate Matches 
Note: Information Not Available 
Additional Information

See the "Related Topics" section.

Example 5

This example shows how time-of-day settings information displays when a call is made between two phones in the same time period with the time zone that is specified as Originating Device. This example assumes the following setup in Cisco Unified Communications Manager:

Configure a Time Period DNATimePeriod1 as follows:

Start Time=9.00

End Time=12.00

Repeat Every Year=Jun 15

Configure a Time schedule DNATimeSchedule1 as follows:

Time period=DNATimePeriod1

Insert a partition called DNAPartition1.

Configure DNAPartition1 as follows:

•Time Schedule=DNATimeSchedule1

•Time Zone=Originating Device

Insert a Calling Search Space called DNACSS-1. Add the DNAPartition1 partition to this CSS.

Insert a Phone SEP000000036201 and assign a DN, 36201, to it.

Choose DNAPartition1 as the partition for the phone.

Use the following procedure to run this example

Procedure

Step 1 Access Dialed Number Analyzer and choose Analysis > Analyzer.

The Analyzer window displays.

Step 2 In the Calling Party field, enter a calling party number (1000 displays by default).

Step 3 In the Dialed Digits field, enter 36201.

Step 4 From the Calling Search Space drop-down list, choose DNACSS1.

Step 5 From the Device Time Zone drop-down list box, choose Greenwich Mean Time (GMT); Dublin, Edinburgh, London, Lisbon.

Step 6 From the Time Zone drop-down list, choose (GMT+05:30): Bombay, Calcutta, Madras, New Delhi, Colombo.

Step 7 From the Date drop-down list boxes, choose 2004, Jun, and 15.

Step 8 From the Time drop-down list boxes, choose 15:30:0:0.

Step 9 Click Do Analysis.

Step 10 The results display in a new window that is called Dialed Number Analyzer Results window. The Results Summary section expands and shows summary information.

Step 11 Click Expand All to expand all the nodes in the window and view all values or click Collapse All to close all the nodes in the window.

Note When the Dialed Number Analyzer Results window first displays, both Expand All and Collapse All buttons are enabled.

See Example 3-5 for the results.

Additional Information

See the "Related Topics" section.

Example 3-5 Analysis Results for Example 5
Results Summary 
Calling Party Information 
Calling Party = 1000 
Partition = 
Device CSS = 
Line CSS = DNACSS1 
AAR Group Name = 
AARCSS = 
Dialed Digits = 36201 
Match Result = RouteThisPattern 
Matched Pattern Information 
Pattern = 36201 
Partition = DNAPartition1 
Time Schedule = DNATimeSchedule1 
Called Party Number = 36201 
Time Zone = (GMT) Greenwich Mean Time; Dublin, Edinburgh, London, Lisbon 
InterDigit Timeout = NO 
Provide Outside Dial Tone = NO 
Call Flow 
Directory Number :DN= 36201 
Partition = DNAPartition1 
Call Classification = OnNet 
Forwarding Information 
   ForwardAll : DN = VoiceMail = No CSS = 
   ForwardBusy 
      Internal : DN = VoiceMail = No CSS = 
      External : DN = VoiceMail = No CSS = 
   ForwardNoAnswer 
      Internal : DN = VoiceMail = No CSS = 
      External : DN = VoiceMail = No CSS = 
   ForwardNoCoverage 
      Internal : DN = VoiceMail = No CSS = 
      External : DN = VoiceMail = No CSS = 
   CFDF : DN = VoiceMail = No CSS = 
   Pickup Group Number = 
Device :Type= Cisco 7960 
   Device Status = UnKnown 
   Device Name = SEP000000036201 
   Ignore Presentation Indicators = Disabled 
   Alerting Name = 
   Do Not Disturb(DND) 
      DND Status = Disabled 
      DND Option = Ringer Off 
      DND Incoming Call Alert = 
      DND Timeout (minutes) = 0 
   Automated Alternate Routing (AAR)
      AAR Group Name = 
      AAR Calling Search Space = 
      AAR VoiceMail Status = Disabled 
      AAR Destination Mask = 
      AAR Prefix Digits =
Alternate Matches 
Note: Information Not Available 
Additional Information

See the "Related Topics" section.

Example 6

This example shows how SIP analysis settings display in the analysis results when SIP route pattern is configured with domain routing. This example assumes the following setup in Cisco Unified Communications Manager:

Pattern Usage = Domain Routing

Pattern = cisco.com

Route Partition = None

SIP Trunk = SIPTrunk

Calling Line ID Presentation = Default

Calling Line Name Presentation = Default

Connected Line ID Presentation = Default

Connected Line Name Presentation = Default

Use the following procedure to run this example.

Procedure

Step 1 Access Dialed Number Analyzer and choose Analysis > Analyzer.

The Analyzer window displays.

Step 2 In the Calling Party field, enter a calling party number (1000 displays by default).

Step 3 Check the check box corresponding to SIP Analysis and choose Domain Route.

Step 4 In the Dialed Digits field, enter sip:1001@cisco.com where, cisco.com represents the gateway mapped to the SIP route pattern through which the call will be directed out. 1001 represents the destination address within the other network to the destination where the SIP call gets routed out from the SIP trunk.

Note Make sure that you check the check box corresponding to SIP analysis before entering Dialed Digits information. If the check box is not checked, the Dialed Digits field accepts only numerical values, A-D, a-d, #, and *.

Step 5 From the Calling Search Space drop-down list, choose None.

Step 6 From the Device Time Zone drop-down list box, choose Greenwich Mean Time (GMT); Dublin, Edinburgh, London, Lisbon.

Step 7 From the Time Zone drop-down list, choose (GMT+05:30): Bombay, Calcutta, Madras, New Delhi, Colombo.

Step 8 From the Date drop-down list boxes, choose 2005, Nov, and 24.

Step 9 From the Time drop-down list boxes, choose 15:30:0:0.

Step 10 Click Do Analysis.

Step 11 The results display in a new window that is called Dialed Number Analyzer Results window. The Results Summary section expands and shows summary information.

Step 12 Click Expand All to expand all the nodes in the window and view all values or click Collapse All to close all the nodes in the window.

Note When the Dialed Number Analyzer Results window first displays, both Expand All and Collapse All buttons are enabled.

See Example 3-6 for the results.

Note The analysis results are based only on configuration settings that are available in Cisco Unified Communications Manager database. For Gateway outbound calls, call details might differ depending on the Gateway's settings

Additional Information

See the "Related Topics" section.

Example 3-6 Analysis Results for Example 6
Results Summary 
Calling Party Information 
Calling Party = 1000 
Partition = 
Device CSS = 
Line CSS = 
AAR Group Name = 
AARCSS = 
Dialed Digits = sip:1001@cisco.com 
Match Result = RouteThisPattern 
Matched Pattern Information 
Pattern = ([mM][oO][cC].[oO][cC][sS][iI][cC]) 
Partition = 
Time Schedule = 
Called Party Number = 
Time Zone = 
Call Classification = OnNet 
InterDigit Timeout = NO 
Device Override = Disabled 
Outside Dial Tone = NO 
Call Flow 
RouteDomainPattern :Pattern= ([mM][oO][cC].[oO][cC][sS][iI][cC]) 
Positional Match List = 
Calling Party Transformations 
External Phone Number Mask = NO 
Calling Party Mask = 
Prefix = 
CallingLineId Presentation = Default 
CallingName Presentation = Default 
Calling Party Number = 1000 
ConnectedParty Transformations 
ConnectedLineId Presentation = Default 
ConnectedName Presentation = Default 
Called Party Transformations 
Called Party Mask = 
Discard Digits Instruction = 
Prefix = 
Called Number = 
Device :Type= SIPTrunk 
End Device Name = SIPTrunk 
PortNumber = 
Device Status = UnKnown 
Automated Alternate Routing (AAR) 
   AAR Group Name = 
   AAR Calling Search Space = 
   AAR VoiceMail Status = Disabled 
   AAR Destination Mask = 
   AAR Prefix Digits =
Call Classification = Use System Default 
Calling Party Selection = Originator 
CallingLineId Presentation = Default 
CallerID DN = 
Alternate Matches 
Note: Information Not Available 
Additional Information

See the "Related Topics" section.

Example 7

This example shows how SIP analysis settings display in the analysis results when SIP route pattern is configured with IP address routing. This example assumes the following setup in Cisco Unified Communications Manager:

Pattern Usage = IPAddress Routing

Pattern = 10.77.21.22

Route Partition = None

SIP Trunk = SIPTrunk

Calling Line ID Presentation = Default

Calling Line Name Presentation = Default

Connected Line ID Presentation = Default

Connected Line Name Presentation = Default

Use the following procedure to run this example.

Procedure

Step 1 Access Dialed Number Analyzer and choose Analysis > Analyzer.

The Analyzer window displays.

Step 2 In the Calling Party field, enter a calling party number (1000 displays by default).

Step 3 Check the check box corresponding to SIP Analysis and choose IP Route.

Step 4 In the Dialed Digits field, enter sip:1001@10.77.21.22 where, 10.77.21.22 represents the gateway mapped to the SIP route pattern through which the call will be directed out. 1001 represents the destination address within the other network to the destination where the SIP call gets routed out from the SIP trunk.

Note Make sure that you check the check box corresponding to SIP analysis before entering Dialed Digits information. If the check box is not checked, the Dialed Digits field accepts only numerical values, A-D, a-d, #, and *.

Step 5 From the Calling Search Space drop-down list, choose None.

Step 6 From the Device Time Zone drop-down list box, choose Greenwich Mean Time (GMT); Dublin, Edinburgh, London, Lisbon.

Step 7 From the Time Zone drop-down list, choose (GMT+05:30): Bombay, Calcutta, Madras, New Delhi, Colombo.

Step 8 From the Date drop-down list boxes, choose 2005, Nov, and 15.

Step 9 From the Time drop-down list boxes, choose 15:30:0:0.

Step 10 Click Do Analysis.

Step 11 The results display in a new window that is called Dialed Number Analyzer Results window. The Results Summary section expands and shows summary information.

Step 12 Click Expand All to expand all the nodes in the window and view all values or click Collapse All to close all the nodes in the window.

Note When the Dialed Number Analyzer Results window first displays, both Expand All and Collapse All buttons are enabled.

See Example 3-7 for the results.

Note The analysis results are based only on configuration settings that are available in Cisco Unified Communications Manager database. For Gateway outbound calls, call details might differ depending on the Gateway's settings

Additional Information

See the "Related Topics" section.

Example 3-7 Analysis Results for Example 7
Results Summary 
Calling Party Information 
Calling Party = 1000 
Partition = 
Device CSS = 
Line CSS = 
AAR Group Name = 
AARCSS = 
Dialed Digits = sip:1001@10.77.21.22 
Match Result = RouteThisPattern 
Matched Pattern Information 
Pattern = (00001010010011010001010100010110) 
Partition = 
Time Schedule = 
Called Party Number = 
Time Zone = 
Call Classification = OnNet 
InterDigit Timeout = NO 
Device Override = Disabled 
Outside Dial Tone = NO 
Call Flow 
RouteIPNetPattern :Pattern= (00001010010011010001010100010110) 
Positional Match List = 
Calling Party Transformations 
External Phone Number Mask = NO 
Calling Party Mask = 
Prefix = 
CallingLineId Presentation = Default 
CallingName Presentation = Default 
Calling Party Number = 1000 
ConnectedParty Transformations 
ConnectedLineId Presentation = Default 
ConnectedName Presentation = Default 
Called Party Transformations 
Called Party Mask = 
Discard Digits Instruction = 
Prefix = 
Called Number = 
Device :Type= SIPTrunk 
End Device Name = SIPTrunk 
PortNumber = 
Device Status = UnKnown 
Automated Alternate Routing (AAR) 
   AAR Group Name = 
   AAR Calling Search Space = 
   AAR VoiceMail Status = Disabled 
   AAR Destination Mask = 
   AAR Prefix Digits =
Call Classification = Use System Default 
Calling Party Selection = Originator 
CallingLineId Presentation = Default 
CallerID DN = 
Alternate Matches 
Note: Information Not Available 
Additional Information

See the "Related Topics" section.

Example 8

This example shows how to use the multiple analyzer feature to perform multiple analysis and bulk testing of dial plans.

Create a CSV file by using the "Using DNA Template to Create the CSV Data File for Multiple Analysis" section or "Creating a Text-Based CSV File for Multiple Analysis" section.

For this example, the CSV file should contain the following three lines for the fields—Calling Party Number, Dialed Digit, Device Time Zone, Time Zone, Date for Analysis, Time for Analysis:

1000,20,,4,37,2005-Jun-9,3:00:59,

1000,30,,4,37,2005-Jun-9,3:00:59,

1000,40,CSS1,4,37,2005-Jun-9,3:00:59,

Use the following procedure to run this example:

Procedure

Step 1 Choose Analysis > Multiple Analyzer.

Step 2 Choose Upload/Download Input Files from the drop-down list box in the upper, right corner of the window and click Go.

Step 3 The Upload/Download Input Files window displays.

Step 4 To upload input files, enter the directory where the CSV file is stored or use the Browse button to choose the directory.

Step 5 Click Upload File. The CSV file uploads to the server.

Note On the server, the uploaded files get stored in the results directory. The results directory can be accessed from the CLI as file list activelog /tomcat/logs/dna/Results. You can collect and view trace files by using the trace and log central option in the Real-Time Monitoring Tool (RTMT). For more information, refer to Cisco Unified Communications Manager Serviceability System Guide.

Step 6 Choose Analysis > Multiple Analyzer.

Step 7 From the File Name drop-down list box, chose the CSV file that you want to analyze.

Step 8 Click Do Analysis. The analysis results display in a separate window called Multiple Analyzer Results. This window displays concise information to determine if the pattern can be routed.

To view the detailed analysis for each row of results, click Details.

Step 9 The results display in a new window that is called Dialed Number Analyzer Results window. The Results Summary section expands and shows summary information.

Step 10 To expand all the nodes in the window and view all values, click Expand All or to close all the nodes in the window, click Collapse All.

Note When the Dialed Number Analyzer Results window first displays, both Expand All and Collapse All buttons are enabled.

See Example 3-8 for the results.

Additional Information

See the "Related Topics" section.

Example 3-8 Analysis result for Example 8

Results for the first line of input data in the uploaded CSV file
Results Summary 
Calling Party Information 
Calling Party = 1000 
Partition = 
Device CSS = 
Line CSS = 
AAR Group Name = 
AARCSS = 
Dialed Digits = 20 
Match Result = BlockThisPattern 
Called Party Number = 
Matched Pattern Information 
Pattern = 
Partition = 
Pattern Type = 
Time Zone = 
Outside Dial Tone = NO 
Call Flow 
Note: Information Not Available 
Alternate Matches 
Note: Information Not Available 
Results for the second line of input data in the uploaded CSV file
Results Summary 
Calling Party Information 
Calling Party = 1000 
Partition = 
Device CSS = 
Line CSS = 
AAR Group Name = 
AARCSS = 
Dialed Digits = 30 
Match Result = BlockThisPattern 
Called Party Number = 
Matched Pattern Information 
Pattern = 
Partition = 
Pattern Type = 
Time Zone = 
Outside Dial Tone = NO 
Call Flow 
Note: Information Not Available 
Alternate Matches 
Note: Information Not Available 
Results for the third line of input data in the uploaded CSV file
Results Summary 
Calling Party Information 
Calling Party = 1000 
Partition = 
Device CSS = 
Line CSS = 
AAR Group Name = 
AARCSS = 
Dialed Digits = 40 
Match Result = BlockThisPattern 
Called Party Number = 
Matched Pattern Information 
Pattern = 
Partition = 
Pattern Type = 
Time Zone = 
Outside Dial Tone = NO 
Call Flow 
Note: Information Not Available 
Alternate Matches 
Note: Information Not Available 
Additional Information

See the "Related Topics" section.

Results Summary

The Results Summary section of the analysis results provides a summary of the dialed digits analysis results and displays Calling Party Information and Matched Pattern Information.

Note Fields that do not contain a description in this section display data as specified in Cisco Unified Communications Manager Administration. For information on these fields, see the Cisco Unified Communications Manager Administration Guide.

Calling Party Information

Calling Party—The calling party number after all the transformations are applied.

Partition—The partition to which the final calling party belongs.

Device CSS—The calling search space (CSS) that is associated with the calling device.

Line CSS—The CSS that is associated with the calling party number.

AAR Group Name—The automated alternate routing (AAR) group to which this pattern belongs.

AARCSS—The calling search space that the calling party device uses when performing AAR.

Dialed Digits—The digits that the user entered in the Dialed Digits field.

Match Result—Specifies whether the call will be routed or blocked. RouteThisPattern or BlockThisPattern displays.

Note Line- and device- specific information displays in the results when you perform analysis by using Analysis > Phones, Analysis > Gateways and Analysis > Trunks windows because a specific device was chosen as a calling entity. When you perform analysis from the Analysis > Analyzer window, you enter a calling party number that is not linked to any device that is configured in Cisco Unified Communications Manager. Line- and device- specific information does not display in the Results Summary section of the analysis results that are obtained by using this procedure.

Matched Pattern Information

•Pattern—Specifies the ultimate pattern matches.

•Partition—Specifies the partition where this ultimate pattern exists.

•Time Schedule—Specifies the name of the time schedule that was chosen for the partition where this pattern exists.

Pattern Type—The Meet-Me Conference Number, Call Park Code Number, and Call Pickup Number display. This field displays only when the dialed digits match a feature pattern type.

Called Party Number—The final called party number.

Time Zone—Time zone information of the device that is associated with the matched pattern.

Interdigit Timeout—The time delay in routing the call to the final device.

End Device—The final device to which the call was routed. This field displays only if the dialed digits match a route pattern.

OffNetPattern (OutsideDialTone)—OffNet/OnNet, depending on whether this field is checked or unchecked in Cisco Unified Communications Manager Administration.

Note For intercept patterns, device-specific information will not display, and instead, a tag that indicates the Pattern Type will display.

Additional Information

See the "Related Topics" section.

Call Flow Details

The Call Flow section of the results provides detailed information about all the stages that a call goes through, such as translation patterns, route patterns, route lists, route groups, and end devices.

Use the following topics to understand the results that display in the Call Flow section:

•Translation Pattern

•Route Pattern

•Hunt Pilot

•Directory Number

•Device Information

Note Fields that do not contain a description in this section display data as specified in Cisco Unified Communications Manager Administration. For information on these fields, see the Cisco Unified Communications Manager Administration Guide.

•Calling Party Transformation—The transformation that is specific to the end device such as the following transformations:

•Pretransform Calling Party Number—The calling party number before the calling party transformation settings of the End Device are applied.

•Calling Party Selection—The selection that can be Originator/Last Redirect Number, and so on.

•Calling Party Presentation

•Calling Party Number—The calling party number after the calling party transformation settings of the End Device are applied.

Translation Pattern

The Translation Pattern section provides information on dialed digits, if the dialed digits match a configured translation pattern.

The following fields display:

•Hunt Pilot :Pattern—The hunt pilot pattern that is matched.

•Positional Match List—The position of the dialed digits in association with a pattern.

•DialPlan—The Numbering Plan in which this translation pattern resides.

•Route Filter—The route filter that is applied to the dialed digits.

–Filter Name—The Route Filter name that is associated with the Translation Pattern.

–Filter Clause—The Route Filter Clause that is associated with the Translation Pattern.

•Pretransform Calling Party Number—The calling party number before the calling party transformation settings of the Translation Pattern are applied.

•Pretransform Called Party Number—The called party number before the called party transformation settings of the Translation Pattern are applied.

•Calling Party Transformations—The calling party transformation settings of the Translation Pattern.

–External Phone Number Mask—Yes/No, depending on whether this field is checked or unchecked in Cisco Unified Communications Manager Administration.

–Calling Party Mask

–Prefix

–Calling Party Presentation

–Calling Party Number—The calling party number after the calling party transformation settings of the Translation Pattern are applied.

•Called Party Transformations— The called party transformation settings of the Translation Pattern, such as the following settings:

–Called Party Mask

–Discard Digit Instructions

–Prefix

–Called Number—The calling party number after the calling party transformation settings of the Translation Pattern are applied.

Route Pattern

The Route Pattern subsection provides information on route pattern details for the dialed digits, if the dialed digits match a route pattern.

•Route pattern:Pattern—The matched route pattern.

•Positional Match List—The position of the dialed digits in association with a pattern.

•DialPlan—The Numbering Plan in which this route pattern resides.

•Route Filter

–Filter Name—The Route Filter name that is associated with the Route Pattern.

–Filter Clause—The Route Filter Clause that is associated with the Route Pattern.

•Require Forced Authorization Code—Yes/No, depending on whether this field is checked or unchecked in Cisco Unified Communications Manager Administration.

•Authorization Level—The authorization level that is specified in Cisco Unified Communications Manager Administration.

•Require Client Matter Code—Yes/No, depending on whether this field is checked or unchecked in Cisco Unified Communications Manager Administration.

•Pretransform Calling Party Number—The calling party number before the calling party transformation settings of the Route Pattern are applied.

•Pretransform Called Party Number—The called party number before the called party transformation settings of the Route Pattern are applied.

•Calling Party Transformations. Displays the calling party transformation settings of the Route Pattern, such as the following settings:

–External Phone Number Mask—Yes/No, depending on whether this field is checked or unchecked in Cisco Unified Communications Manager Administration.

–Calling Party Mask

–Prefix

–Calling Party Presentation

–Calling Party Number—The calling party number after the calling party transformation settings of the Route Pattern are applied.

•Called Party Transformations—The called party transformation settings of the Route Pattern, such as the following settings:

–Called Party Mask

–Digit Discarding Instructions

–Prefix

–Called Number—The calling party number after the calling party transformation settings of the Route Pattern are applied.

Hunt Pilot

This section includes information on Hunt Lists, Line Groups, and Hunt Forward Settings.

•Hunt List: HuntList Name—The name of the Route List.

•LineGroup: LineGroup Name—The name of the Route Group that is contained within this Route List.

•Pretransform Calling Party Number—The calling party number before the calling party transformation settings of the Route Group are applied.

•Pretransform Called Party Number—The called party number before the called party transformation settings of the Route Group are applied.

•Calling Party Transformations—The calling party transformation settings of the Route Group, such as the following settings:

–External Phone Number Mask—Displays Yes/No, depending on whether this field is checked or unchecked in Cisco Unified Communications Manager Administration.

–Calling Party Mask

–Prefix

–Calling Party Number—The calling party number after the calling party transformation settings of the Route Group are applied.

•Called Party Transformations—The called party transformation settings of the Route Group such as the following settings:

–Called Party Mask

–Discard Digit Instructions

–Prefix

–Called Number—The calling party number after the calling party transformation settings of the Route Group are applied

•Hunt Forward Settings

–Forward Hunt No Answer—The call forwarding settings when a hunt pilot is matched.

Use Personal Preferences—Yes/No, depending on whether this field is checked or unchecked in Cisco Unified Communications Manager Administration.

Destination—The destination number for the call forward when there is no answer.

Calling Search Space—The Calling Search Space where the forward destination, either Busy or No Answer, whichever is applicable, is present.

–Forward Hunt Busy—

Use Personal Preferences—Yes/No, depending on whether this field is checked or unchecked in Cisco Unified Communications Manager Administration.

Destination—The destination number for the call forward when there is no answer.

Calling Search Space—The Calling Search Space where the forward destination, either Busy or No Answer, whichever is applicable, is present.

•Maximum Hunt Timer—The value that is specified in the Maximum Hunt Timer field in Cisco Unified Communications Manager Administration.

Directory Number

The Directory Number (DN) subsection provides details about the DN, if the dialed digits match a DN number.

•Directory Number: DN—The directory number.

–Partition—The partition in which the DN resides.

–Device Location

–Forwarding Information—The forwarding settings that are associated with the DN. The forwarding behavior differs depending on whether the call is from an internal or external user. The following forwarding settings display:

–Forward All : DN

–Forward Busy

Internal : DN

External : DN

–Forward No Answer

Internal : DN

External : DN

–Forward No Coverage

Internal : DN

External : DN

Device Information

•Device :Type—The type of device.

–End Device Name—The name of the endpoint device.

–Device Status—The status of the end device as Registered/Unregistered/Unknown.

–Caller ID DN—The mask that is used to format the caller ID on outbound calls from a trunk.

•Inbound Fast Start—Enabled/Disabled depending on whether the Inbound Fast Start field is checked or unchecked in Cisco Unified Communications Manager Administration.

•Outbound Fast Start—Enabled/Disabled depending on whether the Outbound Fast Start field is checked or unchecked in Cisco Unified Communications Manager Administration.

•Codec For Outbound FastStart—The value that is specified in the Codec for Outbound FastStart in Cisco Unified Communications Manager Administration.

•Call Classification—OffNet/OnNet/Use System Default/None, depending on the value that is chosen in Cisco Unified Communications Manager Administration.

•Tunneled Protocol—QSIG/none depending on the value that is configured in the Tunneled Protocol field in Cisco Unified Communications Manager Administration.

•Ignore Presentation Indicators—Presentation settings of the calling party that must be ignored for internal calls.

•Alerting Name—The name of the alerting party that is chosen for a phone in Cisco Unified Communications Manager.

•Dual Mode—Enabled/Disabled, depending on option that was chosen in Cisco Unified Communications Manager Administration.

Do Not Disturb (DND)

•DND Status—Enabled/Disabled based on the status of DND.

•DND Option—The option to have DND ringer on or off.

•DND Incoming Call Alert—No Beep/Flash notification/Beep only/Flash only depending on the type of alert chosen when the ringer in off.

•DND Timeout (minutes)—The time interval after which the phone receives a reminder tone that DND is on.

Automated Alternate Routing (AAR)

AAR Group Name—The AAR Group to which this device belongs.

AAR Calling Search Space—The AAR Calling Search Space where this end device belongs.

AAR VoiceMail Status—Enabled/Diabled. The AAR voice mail status of the device.

AAR Destination Mask—The mask that is used to format the AAR destination.

AAR Prefix Digits—The prefix digits that are used for automated alternate routing within this AAR group.

Intercom DN Pattern

•CSS—The calling search space of the intercom DN.

•Presence Group—The presence group to which the intercom DN belongs.

Additional Information

See the "Related Topics" section.

Alternate Matches

This section provides all the alternate matches that the analysis process looked up while finding the best match for the dialed digits.

Note Fields that do not contain a description in this section display data as specified in Cisco Unified Communications Manager Administration. For information on these fields, see the Cisco Unified Communications Manager Administration Guide.

The output displays in the following format:

•Partition : Name—The partition where the route pattern exists.

•Pattern

–Route Pattern—The name of the route pattern.

–Pattern Type—The pattern type, either Translation or Enterprise.

–Network Location—Indicates the network location of the route pattern, either OffNet or OnNet.

–Communications Manager Device Type—Specifies whether the device matched is an Access Device or a User Device.

Note Other parameters may display, depending on the settings that are associated with the pattern.

Additional Information

See the "Related Topics" section.

Dumping Digit Discard Instructions and Dialing Patterns

Each Cisco Unified Communications Manager dial plan configuration specifies called party transformation information that includes discard digit instructions (DDIs). Dialed Number Analyzer allows you to view the DDIs that are specified for the Cisco Unified Communications Manager dial plan that you are analyzing.

The tool also allows you to view all the dialing patterns that are associated with gateways and phones that are configured in the Cisco Unified Communications Manager dial plan that you are analyzing. Use the following procedure to view DDIs or dialing pattern information that is specified for a dial plan.

Procedure

Step 1 Choose Analysis > Dump DA Information.

The Dump Options window displays.

Step 2 In the Select Dump Option field, click the Discard Digit Instructions or the Dialing Forest radio button.

Step 3 In the Select Viewing Option field, do one of the following actions:

•To view the discard digit instructions or dialing forest information in the browser window, click the Open File in Browser button.

•To save the discard digit instructions or dialing forest information to a file, click the Save File radio button.

Step 4 Click Finish.

If you chose to view the discard digit instructions or dialing forest information on the browser, the results display in the same window.

If you chose to save the discard digit instructions or dialing forest information to a file, the File Download dialog box displays. Use the following procedure to save the file:

a. Click Save.

The Save As dialog displays. Browse to a location on your PC where you want to save the file.

b. Click Save.

The result gets saved as a text file called DialPlanForest.txt or DiscardDigitInstructions.txt, depending on whether you chose discard digit instructions or dialing forest in Step 2.

Additional Information

See the "Related Topics" section.

Viewing Dialed Number Analyzer Output Files

When you store results of analysis that you have performed by using phones, gateways, or trunks, the results get saved as XML files on your PC. You can retrieve and view these output files on the browser by using Dialed Number Analyzer. Use the following procedure to view output files.

Procedure

Step 1 Choose Analysis > View File.

Step 2 The View File window displays.

Step 3 In the Select a File to View field, click Browse. Browse to the location on your PC where the required output file is located and choose it. An example of an output file follows.

DialedNumberAnalyzerOutput_1001.xml

where 1001 represents the dialed digits that are specified during analysis.

Step 4 Click View File.

The output file displays in a new window called Dialed Number Analyzer Results.

The Results Summary section expands to show the summary. Click the plus icon to expand the required results section to view the details.

Step 5 Close the Dialed Number Analyzer Results window after viewing the results.

Additional Information

See the "Related Topics" section.

Trace Configuration Files

Trace files provide a means of tracking problems in the functioning of a tool. The system writes trace files for Dialed Number Analyzer to the server on which Dialed Number Analyzer is installed. You can choose to enable or disable the writing of trace files feature from the Service Control window in Dialed Number Analyzer. This section describes the procedure to enable and disable the writing of trace files.

Use the following procedure to enable the feature.

Procedure

Step 1 In Cisco Unified Communications Manager Serviceability, choose Trace > Trace Configuration.

The Trace Configuration window displays.

Step 2 Choose the server from the Server drop-down list box.

Step 3 Choose Cisco Dialed Number Analyzer from the Configured Services drop-down list box.

Step 4 To activate the trace feature, click the Trace On check box.

Step 5 In the Trace Filter Settings, choose the trace level that you want to set from the Debug Trace Level drop-down list box. Click the desired debug trace level as described in Table 3-2.

Table 3-2 Debug Trace Levels

Level

Description

Fatal

Traces very severe error events that may cause the application to abort.

Error

Traces alarm conditions and events. Used for all traces that are generated in abnormal path. Uses minimum amount of CPU cycles.

Warn

Traces potentially harmful situations.

Info

Traces the majority of servlet problems and has a minimal effect on system performance.

Debug

Traces all State Transition conditions plus media layer events that occur during normal operation.

Trace level that turns on all logging.

Step 6 In the Trace Output Settings, enter values for the maximum number of files, maximum number of lines per file, and maximum number of minutes per file.

Step 7 Click Save.

The system enables the feature, and the trace files get written to the following location on the server:

activelog/tomcat/logs/dna/log4j

The trace files for the Multiple Analyzer feature get written to the following location on the server:

activelog/tomcat/logs/dna/Results

The file displays in the following format:

DNA_indexNo.txt

where <indexNo> ranges from 1- 250.

After you have configured information that you want to include in the trace files, you can collect and view trace files by using the trace and log central option in the Real-Time Monitoring Tool (RTMT). For more information, refer to Cisco Unified Communications Manager Serviceability System Guide.

Use the following procedure to disable the writing trace files feature.

Procedure

Step 1 In Cisco Unified Communications Manager Serviceability, choose Trace > Trace Configuration.

The Trace Configuration window displays.

Step 2 Choose the server from the Server drop-down list box.

Step 3 Choose Cisco Dialed Number Analyzer from the Configured Services drop-down list box.

Step 4 To deactivate the trace feature, uncheck the Trace On check box.

Step 5 Click Save.

This action means that the feature is disabled.

Additional Information

See the "Related Topics" section.

Related Topics

•Database Synchronization

•Simple Analysis by Using the Analyzer Window

•Analysis by Using Phones

•Analysis by Using Gateways

•Analysis by Using Trunks

•Analysis by Using Multiple Analyzer

•Understanding Analysis Output

•Dumping Digit Discard Instructions and Dialing Patterns

•Viewing Dialed Number Analyzer Output Files

•Trace Configuration Files