Sign in to
Cisco Unified IM and Presence Operating System Administration.
Step 2
Select
Show > Cluster.
Step 3
Review the fields in the Cluster window.
Table 1 Cluster Nodes Field Descriptions
Field
Description
Hostname
The complete hostname of the server.
IP Address
The IP address of the server.
Alias
The alias name of the server, when defined.
Type of Node
Indicates whether the server is a publisher node
or a subscriber node.
View hardware status
Procedure
Step 1
Sign in to
Cisco Unified IM and Presence Operating System Administration.
Step 2
Select
Show > Hardware.
Step 3
Review the fields in the Hardware Status window, as described in
the table below.
Table 2 Hardware Status Field Descriptions
Field
Description
Platform Type
The model identity of the platform server.
Serial Number
The serial number of the platform server.
Processor Speed
Processor speed (measured in MHz) in the platform
server.
CPU Type
The type of processor in the platform server.
Memory
The total amount of memory in MBytes.
Object ID
Used by SNMP to identify an object.
OS Version
The version of the platform operating system.
RAID Details
Status of the RAID controller and logical drive
if the machine is RAID enabled.
View network status
Before You Begin
The network status information that displays depends on
whether Network Fault Tolerance is enabled. When Network Fault Tolerance is
enabled, Ethernet port 1 automatically takes over network communications if
Ethernet port 0 fails. If Network Fault Tolerance is enabled, network status
information displays for the network ports Ethernet 0, Ethernet 1, and Bond 0.
If Network Fault Tolerance is not enabled, status information displays only for
Ethernet 0.
Procedure
Step 1
Sign in to
Cisco Unified IM and Presence Operating System Administration.
Step 2
Select
Show > Network.
Step 3
Review the fields in the Network Configuration window, as
described in the table below.
Table 3 Network Settings Field Descriptions
Field
Description
DHCP
Indicates whether DHCP is enabled for Ethernet
port 0.
Status
Indicates whether the port is Up or Down for
Ethernet ports 0 and 1.
IP Address
The IP address of Ethernet port 0 (and Ethernet
port 1 if Network Fault Tolerance (NFT) is enabled).
IP Mask
The IP mask of Ethernet port 0 (and Ethernet port
1 if NFT is enabled).
Link Detected
Indicates whether an active link exists.
Queue Length
The length of the queue.
MTU
The maximum transmission unit.
Mac Address
The hardware address of the port.
Receive Statistics
Information about received bytes and packets.
Transmit Statistics
Information about transmitted bytes and packets.
Primary DNS
The IP address of the primary domain name server.
Secondary DNS
The IP address of the secondary domain name
server.
Domain
The domain of the server.
Gateway
The IP address of the network gateway on
Ethernet port 0.
View installed software
You can view the software versions and installed software
options.
Procedure
Step 1
Sign in to
Cisco Unified IM and Presence Operating System Administration.
Step 2
Select
Show > Software.
Step 3
Review the fields in the Software Packages window described in
the table below.
Table 4 Software Packages Field Descriptions
Field
Description
Partition Versions
The software version that is running on the
active and inactive partitions.
Active Version Installed Software Options
The versions of installed software options,
including locales and dial plans, that are installed on the active version.
Inactive Version Installed Software Options
The versions of installed software options,
including locales and dial plans, that are installed on the inactive version.
View system status
Procedure
Step 1
Sign in to
Cisco Unified IM and Presence Operating System Administration.
Step 2
Select
Show >
System.
Step 3
Review the fields in the System Status window, as described in the
table below.
Table 5 Platform Status Field Descriptions
Field
Description
Host Name
The name of the Cisco MCS host where
Cisco Unified Operating System is installed.
Date/Time
The date and time based on the continent and
region that were specified during operating system installation.
Time Zone
The time zone that was chosen during
installation.
Locale
The language that was chosen during operating
system installation.
Product Version
The operating system version.
Platform Version
The platform version.
View IP preferences
Procedure
Step 1
Sign in to
Cisco Unified IM and Presence Operating System Administration.
Step 2
Select
Show > IP
Preferences.
Step 3
To filter or search records, perform one of the following actions:
From the first list box, select a search parameter.
From the second list box, select a search pattern.
Specify the appropriate search text, if applicable.
Step 4
Select Find.
Step 5
Review the fields in the System Status window.
Table 6 IP Preference Field Descriptions
Field
Description
Application
The name of the application.
Protocol
The type of protocol that this application will
use, for example, TCP or UDP.
Port Number
The port number that is configured for this
application.
Type
The type of transport that this application will
use:
Public
Private
Translated
Translated Port
The translated port number that is configured
for this application.
Status
Indicates whether the application is enabled or
disabled.
Feedback