To view information about the nodes in the cluster, follow this
procedure.
Procedure
Step 1
From the
Cisco Unified Communications Operating System Administration window, navigate to
Show > Cluster.
The Cluster Nodes window appears.
Step 2
For a description of the fields on the Cluster Nodes window, see
the following table.
Table 1 Cluster Nodes Field Descriptions
Field
Description
Hostname
Displays the complete hostname of the node.
IP Address
Displays the IP address of the node.
Alias
Displays the alias name of the node, when
defined.
Type of Node
Indicates whether the node is a publisher node
or a subscriber node.
Show hardware status
To view the hardware status, follow this procedure:
Procedure
Step 1
From the
Cisco Unified Communications Operating System Administration window, navigate to
Show > Hardware.
The Hardware status window displays.
Step 2
For descriptions of the fields on the Hardware Status window, see
the following table.
Table 2 Hardware Status Field Descriptions
Field
Description
Platform Type
Displays the model identity of the platform
server.
Processor Speed
Displays the processor speed.
CPU Type
Displays the type of processor in the platform
server.
Memory
Displays the total amount of memory in MBytes.
Object ID
Displays the object ID.
OS Version
Displays the operating system version.
RAID Details
Displays details about the RAID drive, including
controller information, logical drive information, and physical device
information.
Show network configuration
The network status information that displays depends on
whether Network Fault Tolerance is enabled. When Network Fault Tolerance is
enabled, Ethernet port 1 automatically takes over network communications if
Ethernet port 0 fails. If Network Fault Tolerance is enabled, network status
information displays for the network ports Ethernet 0, Ethernet 1, and Bond 0.
If Network Fault Tolerance is not enabled, status information displays only for
Ethernet 0.
To view the network status, follow this procedure:
Procedure
Step 1
From the
Cisco Unified Communications Operating System Administration window, navigate to
Show > Network.
The Network Settings window displays.
Step 2
See the following table for descriptions of the fields on the
Network Settings window.
Table 3 Network Configuration Field Descriptions
Field
Description
Ethernet Details
DHCP
Indicates whether DHCP is enabled for Ethernet
port 0.
Status
Indicates whether the port is Up or Down for
Ethernet ports 0 and 1.
IP Address
Shows the IP address of Ethernet port 0 [and
Ethernet port 1 if Network Fault Tolerance (NFT) is enabled].
IP Mask
Shows the IP mask of Ethernet port 0 (and
Ethernet port 1 if NFT is enabled).
Link Detected
Indicates whether an active link exists.
Queue Length
Displays the length of the queue.
MTU
Displays the maximum transmission unit.
Mac Address
Displays the hardware address of the port.
Receive Statistics (RX)
Displays information on received bytes, packets,
and errors, as well as dropped and overrun statistics.
Transmit Statistics (TX)
Displays information on transmitted bytes,
packets, and errors, as well as dropped, carrier, and collision statistics.
DNS Details
Primary
Displays the IP address of the primary domain
name server.
Secondary
Displays the IP address of the secondary domain
name server.
Options
Displays the configured DNS options.
Domain
Displays the domain of the server.
Gateway
Displays the IP address of the network gateway
on Ethernet port 0.
Show installed software
To view the software versions and installed software
options, follow this procedure:
Procedure
Step 1
From the
Cisco Unified Communications Operating System Administration window, navigate to
Show > Software.
The Software Packages window displays.
Step 2
For a description of the fields on the Software Packages window,
see the following table.
Table 4 Software Packages Field Descriptions
Field
Description
Partition Versions
Displays the software version that is running on
the active and inactive partitions.
Active Version Installed Software Options
Displays the versions of installed software
options, including locales and dial plans, that are installed on the active
version.
Inactive Version Installed Software Options
Displays the versions of installed software
options, including locales and dial plans, that are installed on the inactive
version.
Show system status
To view the system status, follow this procedure:
Procedure
Step 1
From the
Cisco Unified Communications Operating System Administration window, navigate to
Show > System.
The System Status window displays.
Step 2
See the following table for descriptions of the fields on the
Platform Status window.
Table 5 System Status Field Descriptions
Field
Description
Host Name
Displays the name of the Cisco MCS host where
Cisco Unified Communications Operating System is installed.
Date
Displays the date and time based on the
continent and region that were specified during operating system installation.
Time Zone
Displays the time zone that was chosen during
installation.
Locale
Displays the language that was chosen during
operating system installation.
Product Version
Displays the operating system version.
Platform Version
Displays the platform version.
Uptime
Displays system uptime information.
CPU
Displays the percentage of CPU capacity that is
idle, the percentage that is running system processes, and the percentage that
is running user processes.
Memory
Displays information about memory usage,
including the amount of total memory, free memory, and used memory in KBytes.
Disk/active
Displays the amount of total, free, and used
disk space on the active disk.
Disk/inactive
Displays the amount of total, free, and used
disk space on the inactive disk.
Disk/logging
Displays the amount of total, free, and disk
space that is used for disk logging.
Show IP preferences
You can use the IP Preferences window to display a list of
registered ports that the system can use. The IP Preferences window contains
the following information:
Application
Protocol
Port Number
Type
Translated Port
Status
Description
To access the IP Preferences window, follow this procedure.
Procedure
Step 1
From the
Cisco Unified Communications Operating System Administration window, choose
Show > IP Preferences.
The IP Preferences window displays. Records from an active (prior)
query may also display in the window.
Step 2
To find all records in the database, ensure the dialog box is
empty and click
Find.
To filter or search records
From the first drop-down list box, select a search parameter.
From the second drop-down list box, select a search pattern.
Specify the appropriate search text, if applicable.
Note
To add additional search criteria, click the
+ button. When you add criteria, the
system searches for a record that matches all criteria that you specify. To
remove criteria, click the
– button to remove the last added
criterion or click the
Clear Filter button to remove all
added search criteria.
Step 3
Click
Find.
All matching records display. You can change the number of items
that display on each page by choosing a different value from the Rows per Page
drop-down list box.
For a description of the IP Preferences fields, see the following
table.
Table 6 IP Preferences Field Descriptions
Field
Description
Application
Name of the application using (listening on) the
port.
Protocol
Protocol used on this port (TCP, UDP, and so
on).
Port Number
Numeric port number.
Type
Type of traffic allowed on this port:
Public - All
traffic allowed
Translated -
All traffic allowed but forwarded to a different port
Private -
Traffic only allowed from a defined set of remote servers, for example, other
nodes in the cluster
Translated Port
Traffic destined for this port get forwarded to
the port listed in the Port Number column. This field applies to Translated
type ports only.
Status
Status of port usage:
Enabled - In
use by the application and opened by the firewall
Feedback