Contents

• Unset commands
• unset ipsec*
• unset ipsec policy_group
• unset ipsec policy_name
• unset network*
• unset network dns options
• unset network domain
• unset network ipv6 static_address

Unset commands

---

unset ipsec*

unset ipsec policy_group

This command disables the ipsec policy on the specified group.

unset ipsec policy_group policy_group

Syntax Description

Parameters	Description
policy_group	Specifies the group name.

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No

Applies to: Unified CM, IM and Presence service on Unified CM, Cisco Unity Connection

unset ipsec policy_name

This command disables the ipsec policy with the specified name.

unset ipsec policy_name policy_name

Syntax Description

Parameters	Description
policy_name	Specifies the policy name to disable.

Command Modes

Administrator (admin:)

Usage Guidelines

Enter ALL for policy_name to disable all policy names.

Requirements

Command privilege level: 1

Allowed during upgrade: No

Applies to: Unified CM, IM and Presence service on Unified CM, Cisco Unity Connection

unset network*

unset network dns options

This command unsets DNS options.

unset network dns options [ timeout ] [ attempts ] [ rotate ]

Syntax Description

Parameters	Description
timeout	Sets the wait time before the system considers a DNS query as failed to the default.
attempts	Sets the number of DNS attempts to make before the system fails to the default.
rotate	Sets the method for selecting a nameserver to the default. This affects how loads are distributed across nameservers.

Command Modes

Administrator (admin:)

Usage Guidelines

You are asked to confirm that you want to execute this command.

Caution

If you continue, the system loses network connectivity temporarily.

Requirements

Applies to: Unified CM, IM and Presence service on Unified CM, Cisco Unity Connection

unset network domain

This command unsets the domain name and restarts the server.

unset network domain

Command Modes

Administrator (admin:)

Usage Guidelines

You are asked to confirm that you want to execute this command.

Requirements

Applies to: Unified CM, IM and Presence service on Unified CM, Cisco Unity Connection

Example

admin: unset network domain

cmdSetIp.domain.name.change.warning

Continue (y/n)?

trying to restart system...

Warning: Restart could take up to 5 minutes...

Shutting down Service Manager. Please wait...

unset network ipv6 static_address

This command unsets the IPV6 static address.

unset network ipv6 static_address [ reboot ]

Syntax Description

Parameters	Description
reboot	Reboots the server after applying the change.

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No

Applies to: Unified CM, Cisco Unity Connection

Example

admin: admin:unset network ipv6 static_address

    W A R N I N G

The Server must be rebooted for these changes to take effect.

Please make sure that you reboot this server.

IPv6 static address was removed.