Table Of Contents
Release Notes for Cisco IP Telephony Backup and Restore System (BARS), Version 4.0(14)
This Release Note contains the following information about this release of BARS:
Use this document in conjunction with Cisco IP Telephony Backup and Restore System (BARS) Administration Guide, Version 4.0(12), which provides information on utility installation, configuration, and restoration procedures. To obtain this document, click the following URL:
What is New in This Release
This release of BARS contains the enhancements described in the "Resolved Issues" section.
All-third party applications, including Cisco-provided and Cisco-approved applications that are coresident on the Cisco Unified CallManager server, must be stopped and disabled before you use the restore process.
Note Be sure to stop and disable all intrusion-detection applications, such as Cisco Security Agent and any virus-protection software, before using the restore process.
Tip Before you use BARS to perform a restore, reinstall any service releases; otherwise, BARS produces a version-mismatch error.
After using BARS to perform a restore, be sure to reinstall Cisco IP telephony applications, products, plugins, service releases, locales, and add-on devices to versions that are compatible with the restored version of Cisco Unified CallManager. If this is not done, you may lose data during the next upgrade of Cisco Unified CallManager as well as losing all locales and add-on devices.
Checking the Compatibility Matrix
Be sure to check the Cisco Unified CallManager Compatibility matrix at the following URL for information about which components have been tested with various BARS releases:
Note If you receive a warning while you are using BARS that indicates an incompatibility issue, double-check the matrix. If the matrix indicates that BARS has been tested with the component that the warning specifies, you can ignore the warning.
Table 1 describes the resolved issues for BARS version 4.0(14):
Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:
•All severity level 1 or 2 bugs.
•Significant severity level 3 bugs.
You can search for problems by using the Cisco Software Bug Toolkit.
To access Bug Toolkit, you need the following items:
•Cisco.com user ID and password
To use the Software Bug Toolkit, follow these steps:
Step 1 To access the Bug Toolkit, go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.
Step 2 Log in with your Cisco.com user ID and password.
Step 3 To look for information about a specific problem, enter the bug ID number in the "Search for Bug ID" field, then click Go.
For information about how to search for bugs, create saved searches, create bug groups, etc., click Help in the Bug Toolkit page.
This section provides documentation changes that were unavailable when the Cisco IP Telephony Backup and Restore System (BARS) Version 4.0(13) documentation was released.
In the "Restoring a CRS Release 4.x Cluster" section, Step 4 should be replaced with the following information:
The "Restore Wizard: Step 2 of 4" window displays in one of the following two versions:
•If you chose a CiscoUpgrade.tar archive file that you copied from the CRS CD or a Patch(SR/ES).tar file that you downloaded from CCO from the previous window, the wizard prompts you to "Enter CRS data destination server to restore" in the Data Destination Server field. Enter the name of any active CRS server in the CRS cluster and click Next.
The server that you choose restores the data for the entire CRS cluster on which it resides. This data destination server does not need to be the same server that you chose as the data source server when this CRS cluster was backed up.
•If the archive that you chose on the previous window was a .tar file that was created by using BARS, you are now instructed to: "Select data destination server and application to restore."
From the drop-down lists on the "Restore Wizard: Step 2 of 4" window, first choose any active CRS server in the CRS cluster; then, choose the application (CRS) to restore. Click Next.
Note If you are restoring the data on a Cisco Customer Response Solutions (CRS) cluster, the CRS data destination server that you choose restores the data for the entire CRS cluster on which it resides. This data destination server does not need to be the same server that you chose as the data source server when this CRS cluster was backed up.
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
Cisco Product Security Overview
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
Further information regarding U.S. export regulations may be found at http://www.access.gpo.gov/bis/ear/ear_data.html.
CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco StadiumVision, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn is a service mark; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0804R)
© 2008 Cisco Systems, Inc. All rights reserved.