Table Of Contents

A - C - E - F - I - M - N - O - P - S - T - V -

Index

A

Allow TRAP Connections (port setting) 2-2

Answer Calls (port setting) 2-2

application note

Intecom Pointspan 6880 A-1

NEC NEAX 2400 IMX B-1

Nortel SL-100 C-1

Avaya Definity G3 in-band integration

creating a new integration 3-14

phone system programming instructions 3-3

requirements 3-2

task list 3-1

TIMG unit setup instructions 3-5

Avaya S8500/S8700 in-band integration

creating a new integration 4-14

phone system programming instructions 4-3

requirements 4-2

task list 4-1

TIMG unit setup instructions 4-5

C

call information 1-2

connections, required for TIMG integration 1-1

E

Enabled (port setting) 2-1

Extension (port setting) 2-1

F

features provided by integration 1-3

firmware version 5.x, TIMG settings D-1

forwarded calls, information sent by phone system 1-2

I

in-band integration (Avaya Definity G3)

creating a new integration 3-14

phone system programming instructions 3-3

requirements 3-2

task list 3-1

TIMG unit setup instructions 3-5

in-band integration (Avaya S8500/S8700)

creating a new integration 4-14

phone system programming instructions 4-3

requirements 4-2

task list 4-1

TIMG unit setup instructions 4-5

Intecom Pointspan 6880

application note A-1

configuring serial cable A-3

integration

connections 1-1

description 1-1

Intecom Pointspan 6880, application note A-1

NEC NEAX 2400 IMX, application note B-1

Nortel SL-100, application note C-1

M

multiple integrations 1-3

N

NEC NEAX 2400 IMX, application note B-1

Nortel SL-100

application note C-1

configuring serial cable C-9

O

Outgoing Hunt Order (port setting) 2-2

P

Perform Message Notification (port setting) 2-2

phone systems, supported 1-1

ports

considerations for Cisco Unity Connection cluster 2-3

planning how many will answer calls 2-3

planning how many will dial out 2-3

planning number to install 2-2

planning setup 2-1

settings 2-1

S

Send MWI Requests (port setting) 2-2

serial (SMDI, MCI, or MD-110) integration

creating a new integration 5-14

phone system programming instructions 5-3

requirements 5-2

task list 5-1

TIMG unit setup instructions 5-4

supported phone systems 1-1

T

testing

deleting the test user 6-4

setting up supervised transfer 6-3

setting up test configuration 6-1

testing an external call with release transfer 6-2

testing supervised transfer 6-4

testing the functionality for listening to messages 6-3

TIMG integrations, supported phone systems 1-1

TIMG settings for firmware version 5.x D-1

V

voice messaging ports, settings 2-1