Table Of Contents
Release Notes for Cisco IP Communicator Release 1.1(5)
These release notes provide information for Cisco CallManager Release 3.3(3) Service Release 3 and later releases, Cisco CallManager 4.0(2a) and later releases, and for Cisco CallManager Release 4.1(2) or a later release.
September 30, 2005
These release notes provide the following information:
For information about Cisco IP Communicator Release 1.1(5), see the following documentation at this URL:
Cisco IP Communicator
•Cisco IP Communicator Administrator Guide (1.1)
•Cisco IP Communicator User Guide (1.1)
Choose a language and product link to access documentation from this website. The User Guide is also available from the Cisco IP Communicator program folder.
For information about Cisco CallManager, see the following documentation at this URL:
Cisco CallManager Administration
•Cisco CallManager Administration Guide
•Cisco CallManager System Guide
•Cisco CallManager Serviceability Administration Guide
•Cisco CallManager Serviceability System Guide
•Bulk Administration Tool User Guide for Cisco CallManager
•Cisco CallManager Features and Services Guide
Cisco CallManager Releases That Are Supported
Cisco IP Communicator Release 1.1(5) supports the following Cisco CallManager releases:
•Cisco CallManager Release 3.3(3) Service Release 3 and later releases
•Cisco CallManager Release 4.0(2a) and later releases
•Cisco CallManager Release 4.1(2) or a later release supports the same features as Release 3.3(x)
Note Survivable Remote Site Telephony Release 3.1 (or earlier releases) and Cisco CallManager Express Release 3.1 (or earlier releases) do not support Cisco IP Communicator.
New and Changed Information
Languages that Cisco IP Communicator Release 1.1(5) Supports
Cisco IP Communicator Release 1.1(5) supports English and French only. Other languages will be supported in future releases of Cisco IP Communicator.
When using the CiscoIPCommunicatorSetup.exe file, a drop-down dialog box prompts you to install Cisco IP Communicator in English (United States) or French (France).
If you are customizing deployment of Cisco IP Communicator using command-line options, you must add an extra TRANSFORMS parameter to the command line in order to install the French locale. You must associate the correct locale .mst file to the TRANSFORMS parameter in order for the command line option to function properly. For example:c:\ Msiexec.exe /i CiscoIPCommunicatorSetup.msi /qb+ TRANSFORMS="French.mst"
This section contains important information about Cisco IP Communicator Release 1.1(5).
Installing a Hotfix for USB Audio Devices
Caution If you are using Cisco IP Communicator with a USB audio device, you may need to install the specified Microsoft hotfix to avoid system crashes.
You must install a Microsoft Windows hotfix if you use Cisco IP Communicator with both of the following:
•Windows 2000 Service Pack 3 or later releases
•USB audio devices
To get the hotfix for your locale, access the file called cipc-Admin-ffr.1-1-1.zip from this website:
Unzip the W2KUSBHotfix.zip file to access the appropriate locale folder.
If you are installing the English version of Cisco IP Communicator Release 1.1(5), then run the Windows2000-KB832339-x86-ENU.EXE file.
If you are installing the French version of Cisco IP Communicator Release 1.1(5), then run the Windows200-KB832339-x86-FRA.EXE file.
Disabling the Internal Web Server
You can disable the internal web server for Cisco IP Communicator by creating a Windows registry value and using the regedit utility.
Step 1 Open Windows regedit from the command line or from Start > Run.
Step 2 In regedit, choose HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\Communicator.
Step 3 From the Edit menu, choose New > DWORD value.
Step 4 Rename the value WebServerDisabled (this value does not appear by default) and set it to any non-zero value.
Step 5 To enable the web server again, delete this key or set it to zero.
Generating and Retrieving Error Reports
Note For troubleshooting purposes, advise end users to enable logging immediately after installation and tell them how to generate an error report so that Cisco Technical Support can use the error report to assist in troubleshooting.
Here are detailed instructions that you can pass on to end-users:
Step 1 After installing Cisco IP Communicator, right-click > Preferences > User. The User dialog box appears. Check Enable Logging to see error reports with the highest and most useful level of detail.
Step 2 To generate the error report choose Start > Programs > Cisco IP Communicator > Error Reporting.
Step 3 Click OK.
Step 4 You can retrieve the error report from one of these locations:
•If your computer uses Microsoft Windows XP, choose Start > My Documents > Cisco IP Communicator
•If your computer uses Microsoft Windows 2000, choose Start > Documents > My Documents > Cisco IP Communicator
Build Versions in the About Window May Vary
Build version numbers that are listed in the Cisco IP Communicator Release 1.1(5) About window might vary by software component. For example, the versions listed for Sfb.dll, Cpmt.sys, and CdpPacket.sys may not match. This is a normal outcome of installing or upgrading the application and does not indicate a problem with the installation or upgrade process.
To view build versions for software components, right-click > About Cisco IP Communicator. Build versions are listed in the right column.
Audio Tuning and Sound Card Information
This section includes the following topics:
Achieving Optimal Tuning While Using the Audio Tuning Wizard
You can tune the output volume in Cisco IP Communicator by using two controls in the Audio Tuning Wizard:
•A master volume slider—Affects all applications
•A wave volume slider— Affects most applications, including Cisco IP Communicator
Common Tuning Mistakes
Users often set the volume levels high initially from the master or wave sliders in the Audio Tuning Wizard, and later reduce the levels by using Microsoft Windows volume controls or laptop sound keys because other applications sound too loud. When users subsequently discover that Cisco IP Communicator sounds too soft, users set the volume button on the main Cisco IP Communicator interface to sharply increase the call volume.
Note A high volume setting in the application can cause users' voices to sound distorted.
Recommended Tuning Guidelines
Follow these guidelines to use the Audio Tuning Wizard dialog box to adjust the volume levels for Cisco IP Communicator:
•Adjust the master volume slider first. Because this setting affects all applications that play sound, test the setting against other applications (such as Microsoft Windows Media Player and RealPlayer) to ensure that volume levels are appropriate.
•Adjust the wave volume slider to a comfortable level for phone calls after adjusting the master volume.
•If the user changes volume settings from Microsoft Windows, run the Audio Tuning Wizard again (according the above guidelines) to re tune the master and wave volume settings.
Bluetooth Devices, Jittery Audio, and Latency Optimization
Various sound cards have differing capabilities. Some are good for low latency audio, which is required for telephone calls, while others (including common Bluetooth devices) cannot be used in very low-latency modes. The resulting audio sounds consistently jittery, with frequent pops and clicks.
Testing for Latency Optimization
To test which latency setting is best for your particular set of audio devices (USB headsets, USB handsets, or sound cards), follow this procedure to modify audio parameters for Cisco IP Communicator.
Note We recommended that you test the .reg file with the lowest settings first and continue to the next .reg file, if needed. However, a Bluetooth audio device with Widcomm PC drivers requires settings that are not lower than those in the HighDelay.reg or VeryHighDelay.reg file.
Use this procedure if you are having difficulty with an audio device that sounds less than satisfactory with Cisco IP Communicator, but performs well with other applications.
Step 1 In the Cisco IP Communicator program folder, double-click one of the following .reg files:
•LowDelay.reg (Lowest latency, default setting)
•VeryHighDelay.reg (Highest Latency)
Step 2 When prompted, confirm that you wish to import the settings into your Microsoft Windows registry.
Step 3 Make a test phone call and verify that the audio sounds good to you and to the other party. If you hear distortion, audio dropouts, or robotic sound, proceed to the next file on the list and repeat the previous steps.
About Choosing Headsets and Handsets for Cisco IP Communicator
Even though internal testing of third-party headsets and handsets for IP Communicator has been performed, Cisco does not certify or support products from headset and handset vendors. Because of the inherent environmental and hardware inconsistencies in the locations in which IP Communicator is deployed, there is no one best solution that is optimal for all environments. Cisco recommends that customers test the headsets and handsets that work best in their environment before deploying a large number of units in their network.
The primary reason that support of a headset or handset would be inappropriate for an installation is the potential for an audible hum, either a hum heard by the remote party, or by both the remote party and the IP Communicator user. Causes for the hum range from electrical lights near the PC to the PC power source itself. In some cases, a hum experienced by a user using an audio device that is plugged directly into the PC USB port may be reduced or eliminated by using a powered USB hub.
In some instances, the mechanics or electronics of various headsets can cause remote parties to hear their own voices echo back when they speak to IP Communicator users. The IP Communicator user will not be aware of the echo.
Finally, some analog headsets do not match the electrical characteristics for which some soundcards are designed. The microphones on such headsets are frequently too sensitive, even when the input levels in IP Communicator are reduced to their lowest values; the voices of users on such headsets will sound distorted to remote parties.
It is important to ask IP Communicator users whether a particular headset sounds good to them. In addition, remote parties should be queried as to the reception from IP Communicator when using a particular headset.
Testing performed in Cisco labs has shown that the Plantronics DSP 300 and Plantronics DSP 400 have performed well with IP Communicator, but it remains the customer's responsibility to test the headsets in their environment.
For your reference, other headset and handset vendors include the following:
• Actiontec - www.actiontec.com
• Clarisys - www.clarisys.net
• CommuniTech - www.communitech.com
• Danacom - www.danacomusa.com
• Eutectics - www.eutecticsinc.com
• GNNetcom - www.gnnetcom.com
• Plantronics - www.plantronics.com
• Technology Link Corporation (for Japan only) - www.link-corp.co.jp
• VXI - www.vxicorp.com
Information not Found in the User Guide
This section contains information about Cisco IP Communicator Release 1.1(5) that is not addressed in the current Cisco IP Communicator User Guide. Cisco suggests that you provide this information to end-users.
Bringing an Active Call to the Front
The "Bring to front on active call" check box is accessible from the Cisco IP Communicator interface (right-click > Preferences > User), as shown in Figure 1.
When enabled, this feature brings the application to the top of all other applications when an incoming call is received. If disabled, the application does not appear on the top when an incoming call is received, and the only indication of the incoming call is the ringer sound.
Figure 1 Cisco IP Communicator User Preferences
Hiding the Minimized Application Icon
The "Hide on minimize" check box is available from the Cisco IP Communicator interface (right-click > Preferences > User), as shown in Figure 1.
When this feature is enabled and the user minimizes the application, Cisco IP Communicator does not appear as a toolbar button, but appears in the system icon tray. Double-click the icon in the system tray to restore the application.
Using WebDialer and Extension Mobility
Running Cisco IP Communicator Release 1.1(5) on Cisco CallManager Release 3.3(4) or later releases allows users to access the Cisco Extension Mobility and WebDialer features.
See Customizing Your Cisco IP Phone on the Web:
Administrative information about these features is available in Cisco CallManager documentation.
Searching for Personal Numbers with Quick Search
End users should note that only those phone numbers that are entered in the Work field in the Personal Address Book service appear in Quick Search results. Home and mobile phone numbers do not appear in the Personal Address Book.
Finding Error Reports
It is important that end users know how to use the Error Reporting Tool to capture information that can assist in troubleshooting, and that end users enable logging after installation. For a summary of which information to provide to end-users, see the "Generating and Retrieving Error Reports" section.
Note Data from the Error Reporting Tool is saved in the following locations; however, these paths will not be visible until the user creates an error report. See the "Generating and Retrieving Error Reports" section
•On computers using Microsoft Windows XP, choose Start > My Documents > Cisco IP Communicator.
•On computers using Microsoft Windows 2000, choose Start > Documents > My Documents > Cisco IP Communicator.
Accessing Online Help from Right-Click Menu
Users can access the Cisco IP Communicator User Guide online help by choosing right-click > Help.
Note The Cisco IP Communicator User Guide erroneously describes the right-click menu item as User Guide.
From the online help window, users can choose View PDF. A PDF version is also available from the Cisco IP Communicator program folder.
Table 1 describes the issues that are resolved in Cisco IP Communicator Release 1.1(5).
Note If you have an account with Cisco.com (Cisco Connection Online), you can use the Bug Toolkit to find caveats of any severity for any release. To access the Bug Toolkit, log in to: http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl
Table 2 describes open issues for Cisco IP Communicator Release 1.1(5).
Note If you have an account with Cisco.com (Cisco Connection Online), you can use the Bug Toolkit to find caveats of any severity for any release. To access the Bug Toolkit, log in to: http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl
Virtual Private Network (VPN)
There are some known issues when using Cisco IP Communicator Release 1.1(5) with VPN software.
Problem Description (CSCee09266)
One-way audio is observed when using Cisco IP Communicator with VSClient VPN software
See CSCee09266 for more information.
Problem Description (CSCed21257)
When using Cisco IP Communicator over a dialup (modem) connection using the Cisco VPN client and audio is poor, Cisco IP Communicator unregisters from Cisco CallManager spontaneously, and sometimes the VPN connection spontaneously drops.
Workaround: None. Dialup connections have insufficient bandwidth to support Cisco IP Communicator over Cisco VPN.
See CSCed21257 for more information.
Universal Serial Bus Audio Devices
There are some known issues when using Cisco IP Communicator Release 1.1(5) with USB audio devices.
Problem Description (CSCec58049)
When using a VXi-brand headset that is connected to the PC via a VXi TuffSet USB adapter, the other persons in the call may hear their own speech echo.
Workaround: Some VXi headsets are prone to acoustically-coupled echo. The microphone in the headset picks up the output of the earpiece(s) and feeds it back to the remote party. To reduce the echo, use the Audio Tuning Wizard to reduce the microphone volume as much as possible. This will reduce the amount of acoustic feedback and help reduce echo. Likewise, lower the headset speaker volume as much as possible. Finally, consider configuring the headset in Cisco IP Communicator for speakerphone mode rather than headset mode. Although this will reduce the frequency response of the headset (the sound won't be as rich), it will suppress some of the echo.
See CSCec58049 for more information.
Problem Description (CSCec63499)
An audible hum is heard on the headset speaker or handset receiver when it is directly connected to some laptop USB ports.
Workaround: Use a powered USB hub.
See CSCec63499 for more information.
Problem Description (CSCec23649)
Digits are dialed twice when using the Claritel i750 USB Handset.
Workaround: Enter the digits before pressing the On-Off button or before going off-hook, or quit the Claritel Application Gateway application (running in the system tray) and remove it from the startup items. This will allow normal dialing with the handset and Cisco IP Communicator, but may interfere with other applications that use the handset (if any).
See CSCec23649 for more information.
Problem Description (CSCin50824)
Some buttons and keys do not function when using a supported USB handset device that is configured for handset mode.
See CSCin50824 for more information.
Cisco VT Advantage
There are some known issues when using Cisco IP Communicator Release 1.1(5) with Cisco VT Advantage.
Problem Description (CSCee00053)
When changing a USB handset or headset, the user receives the following error message: "Audio Tuning Wizard cannot configure this device to play sound. Cisco IP Communicator may not function properly with this device."
Workaround: Reboot the PC and insert the USB device for Cisco IP Communicator followed by the USB device for Cisco VT Advantage.
See CSCee00053 for more information.
Problem Description (CSCee07575)
When using a USB Audio Device with Cisco IP Communicator at the same time as Cisco VT Advantage, users receive the following error message: "USB Controller Bandwidth Exceeded."
Workaround: Avoid using Cisco VT Advantage and a USB audio device with Cisco IP Communicator at the same time. Another workaround is to ensure that the Cisco VT Advantage camera and the USB audio device for Cisco IP Communicator are using separate USB ports on the PC.
See CSCee07575 for more information.
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
You can access the most current Cisco documentation on the World Wide Web at this URL:
International Cisco websites can be accessed from this URL:
You can find instructions for ordering documentation at this URL:
You can order Cisco documentation in these ways:
•Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Ordering tool:
•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).
You can submit e-mail comments about technical documentation to firstname.lastname@example.org.
You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate your comments.
Obtaining Technical Assistance
For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, the Cisco Technical Assistance Center (TAC) provides 24-hour-a-day, award-winning technical support services, online and over the phone. Cisco.com features the Cisco TAC website as an online starting point for technical assistance. If you do not hold a valid Cisco service contract, please contact your reseller.
Cisco TAC Website
The Cisco TAC website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The Cisco TAC website is available 24 hours a day, 365 days a year. The Cisco TAC website is located at this URL:
Accessing all the tools on the Cisco TAC website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a login ID or password, register at this URL:
Opening a TAC Case
Using the online TAC Case Open Tool is the fastest way to open P3 and P4 cases. (P3 and P4 cases are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Case Open Tool automatically recommends resources for an immediate solution. If your issue is not resolved using the recommended resources, your case will be assigned to a Cisco TAC engineer. The online TAC Case Open Tool is located at this URL:
For P1 or P2 cases (P1 and P2 cases are those in which your production network is down or severely degraded) or if you do not have Internet access, contact Cisco TAC by telephone. Cisco TAC engineers are assigned immediately to P1 and P2 cases to help keep your business operations running smoothly.
To open a case by telephone, use one of the following numbers:
Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447
For a complete listing of Cisco TAC contacts, go to this URL:
TAC Case Priority Definitions
To ensure that all cases are reported in a standard format, Cisco has established case priority definitions.
Priority 1 (P1)—Your network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
Priority 2 (P2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.
Priority 3 (P3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.
Priority 4 (P4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•Cisco Marketplace provides a variety of Cisco books, reference guides, and logo merchandise. Go to this URL to visit the company store:
•The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer support services. Access the Cisco Product Catalog at this URL:
•Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press online at this URL:
•Packet magazine is the Cisco quarterly publication that provides the latest networking trends, technology breakthroughs, and Cisco products and solutions to help industry professionals get the most from their networking investment. Included are networking deployment and troubleshooting tips, configuration examples, customer case studies, tutorials and training, certification information, and links to numerous in-depth online resources. You can access Packet magazine at this URL:
•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:
•Training—Cisco offers world-class networking training. Current offerings in network training are listed at this URL:
This document is to be used in conjunction with the documents listed in the Documentation Roadmap section.
CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StrataView Plus, TeleRouter, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0502R)
Copyright © 2005 Cisco Systems, Inc. All rights reserved.