Table Of Contents
Cisco Emergency Responder Release Notes for 2.0(1)
Contents
Hardware and Software Requirements
Related Documentation
New and Changed Information
Installation Notes
Supported Upgrades
Important Upgrade Notes
Caveats
Using Bug Toolkit
Open Caveats
Resolved Caveats
Obtaining Documentation, Obtaining Support, and Security Guidelines
Acknowledgements
Cisco Emergency Responder Release Notes for 2.0(1)
June 15, 2007
These release notes describe the feature enhancement and caveats for Cisco Emergency Responder (Cisco ER) 2.0(1).
Contents
These release notes provide the following information:
•
Hardware and Software Requirements
•Related Documentation
•New and Changed Information
•Installation Notes
•Caveats
•Obtaining Documentation, Obtaining Support, and Security Guidelines
•Acknowledgements
Hardware and Software Requirements
Cisco ER 2.0 supports a variety of hardware and software components, as shown in the following tables.
Note The type of support can differ between types of hardware; read the tables carefully to determine how Cisco ER will work with the devices you use.
Table 1 lists other software that you must install to use Cisco ER 2.0.
Table 1 Required Software
Item
|
Supported Software Version
|
Description
|
Data Migration Assistant (DMA)
|
•Release 6.0(1)
|
Before you can upgrade from Cisco ER 1.3 to Cisco ER 2.0, you must use the Data Migration Assistant (DMA) tool to create a migration file containing your Cisco ER 1.3 configuration information. As part of the upgrade process, you will be prompted to provide the location of this migration file.
|
Cisco Unified CallManager and
Cisco Unified
Communications Manager
|
•Cisco Unified CallManager 4.2
•Cisco Unified CallManager 4.3
•Cisco Unified Communications Manager 5.0
•Cisco Unified Communications Manager 5.1
•Cisco Unified Communications Manager 6.0
|
The software that runs the telephony network.
|
Web browser
|
•Microsoft Internet Explorer 6.0
•Mozilla Firefox 2.0
|
Internet Explorer is supported on Windows 2000, Windows NT, and Windows 95.
|
Table 2 contains optional software that is recommended for use with Cisco ER 2.0.
Table 2 Recommended Software
Item
|
Minimum Software Version
|
Description
|
E-mail server
|
Any SMTP e-mail server
|
Used to send e-mail notifications to onsite alert (security) personnel. If you use an SMTP e-mail paging server, personnel are paged instead of e-mailed.
|
Cisco Unified Operations Manager
Note CiscoWorks IP Telephony Environment Monitor (ITEM) 2.0 is also supported.
|
Version 1.0
|
Used to monitor the health and functionality of Cisco ER.
|
Table 3 lists the different types of phones that support Cisco ER 2.0. The type of support Cisco ER 2.0 supplies differs depending on the type of phone and the type of switch port to which the phone is attached.
Table 3 Supported Phones
Phones
|
Description
|
Phones automatically tracked using CDP
•SCCP protocol on Cisco Unified IP Phone 7975, 7971, 7970, 7965, 7962, 7961, 7960, 7945, 7942, 7941, 7940, 7936, 7935, 7931, 7912, 7911, 7910, 7905, 7902, 7985
•All other SCCP phones with CDP support, with the exception of ATA devices
•SIP protocol on Cisco Unified IP Phone 7975, 7971, 7970, 7965, 7962, 7961, 7960, 7945, 7942, 7941, 7940, 7931, 7912, 7911, 7905
•Cisco IP Communicator
|
These phones do not require special Cisco ER configuration. However, ensure that you enable Cisco Discovery Protocol (CDP) on the switches.
Note Although ATA phones support CDP and SCCP, Cisco ER cannot automatically track them. You can add ATA phones manually and assign them to an ERL. Cisco ER will route calls from ATA phones based on the assigned ERL.
|
Phones automatically tracked using CAM tables
•Cisco Unified IP Phone 12 SP+ and VIP 30
|
To automatically track these phones, you must enable content-addressable memory (CAM) tracking when you add the switches to the Cisco ER configuration. Phones that do not use CDP are tracked using the CAM table on all supported switch platforms for Native and AUX VLANs.
|
Phones that you can track using IP subnet
•Wireless phones, such as Cisco Unified Wireless IP Phone 7920/7921, and Cisco IP SoftPhones running on 802.11b
•Supported Cisco Unified IP Phones connected to Cisco or third-party switches that are not discovered or recognized by Cisco ER
•Cisco Unified Personal Communicator
•Third-party SIP phones
|
To track these phones, you must configure the subnet and then assign ERLs to the configured subnets.
Note The use of CAM table tracking can result in the inadvertent discovery and unsupported use of wireless IP phone MACs for tracking purposes. To avoid mis-tracking of wireless IP phones, if CAM table tracking is enabled for a switch, the ERL configured for any switch port connected to a wireless access point must agree with the ERL configured for the IP subnet that will contain the phones connected to that access point.
|
Phones that you can manually define
•Analog phones, for example, phones connected to VG 224/248 and ATA devices
•Generic H.323 or SIP endpoints. Supported H.323 phones are Microsoft NetMeeting and Tandberg.
•Any phone otherwise supported for automatic tracking that is connected to an unsupported switch port
|
These phones are only supported if their calls are routed by Cisco Unified Communications Manager.
|
Note Cisco ER supports SNMP version 1, version 2, and version 2c of a LAN switch.
Table 4 lists the switches that are supported for automatic tracking. You can use other switches, but you might have to manually define phones attached to those switches.
Table 4 Supported Voice-Ready LAN Switches
Series
(Ethernet ports only)
|
Notes
|
Device Supported
|
System Object ID from CISCO-PRODUCTS-MIB
|
Catalyst 500 Express Switch
|
|
500-24TT
|
1.3.6.1.4.1.9.1.724
|
500-24LC
|
1.3.6.1.4.1.9.1.725
|
500-24PC
|
1.3.6.1.4.1.9.1.726
|
500G-12TC
|
1.3.6.1.4.1.9.1.727
|
Catalyst 2900 XL
|
12.01.5.WE12 and higher
|
2908 XL
|
1.3.6.1.4.1.9.1.170
|
2916 MXL
|
1.3.6.1.4.1.9.1.171
|
| |
2924 XL
|
1.3.6.1.4.1.9.1.183
|
2924 CXL
|
1.3.6.1.4.1.9.1.184
|
2924 XLV
|
1.3.6.1.4.1.9.1.217
|
2924 CXLV
|
1.3.6.1.4.1.9.1.218
|
2912 XL
|
1.3.6.1.4.1.9.1.219
|
2924 MXL
|
1.3.6.1.4.1.9.1.220
|
2912 MXFL
|
1.3.6.1.4.1.9.1.221
|
2900
|
1.3.6.1.4.1.9.5.12
|
2926
|
1.3.6.1.4.1.9.5.35
|
2948 G
|
1.3.6.1.4.1.9.5.42
|
Catalyst 2940
|
Cisco IOS 12.1(22)EA1
|
2940-8TT-S
|
1.3.6.1.4.1.9.1.540
|
2940-8TF-S
|
1.3.6.1.4.1.9.1.542
|
Catalyst 2948
|
CatOS
|
2948G-GE-TX
|
1.3.6.1.4.1.9.5.62
|
Catalyst 2950
|
12.1.9.EA1 and higher
|
2950-12
|
1.3.6.1.4.1.9.1.323
|
2950-24
|
1.3.6.1.4.1.9.1.324
|
2950-24SX
|
1.3.6.1.4.1.9.1.480
|
2950-48SX
|
1.3.6.1.4.1.9.1.560
|
2950-48T
|
1.3.6.1.4.1.9.1.559
|
2950C-24
|
1.3.6.1.4.1.9.1.325
|
2950T-24
|
1.3.6.1.4.1.9.1.359
|
2950G-12
|
1.3.6.1.4.1.9.1.427
|
2950G-24
|
1.3.6.1.4.1.9.1.428
|
2950G-48
|
1.3.6.1.4.1.9.1.429
|
2950S-24
|
1.3.6.1.4.1.9.1.430
|
2950G-24DC
|
1.3.6.1.4.1.9.1.472
|
Catalyst 2960
|
Cisco IOS 12.2(25)SED
|
2960-24TC-L
|
1.3.6.1.4.1.9.1.694
|
2960-48TC-L
|
1.3.6.1.4.1.9.1.695
|
2960G-24TC-L
|
1.3.6.1.4.1.9.1.696
|
2960G-48TT-L
|
1.3.6.1.4.1.9.1.697
|
2960-24TT-L
|
1.3.6.1.4.1.9.1.716
|
2960-48TT-L
|
1.3.6.1.4.1.9.1.717
|
| |
2960-8TC-L
|
1.3.6.1.4.1.9.1.798
|
2960G-8TC-L
|
1.3.6.1.4.1.9.1.799
|
Catalyst 3500 XL
|
Cisco IPS 12.0(5)XU or higher
If you are using Catalyst 3500 clusters, you must assign an IP address to each Catalyst 3500 switch.
|
3508 GXL
|
1.3.6.1.4.1.9.1.246
|
3512 XL
|
1.3.6.1.4.1.9.1.247
|
3524 XL
|
1.3.6.1.4.1.9.1.248
|
3548 XL
|
1.3.6.1.4.1.9.1.278
|
3524 PWR XL
|
1.3.6.1.4.1.9.1.287
|
Catalyst 3550
|
12/1/6/EA1a or higher
|
3550-24
|
1.3.6.1.4.1.9.1.366
|
3550-24PWR
|
1.3.6.1.4.1.9.1.485
|
3550-48
|
1.3.6.1.4.1.9.1.367
|
3550-12T
|
1.3.6.1.4.1.9.1.368
|
3550-12G
|
1.3.6.1.4.1.9.1.431
|
3550-24DC
|
1.3.6.1.4.1.9.1.452
|
Catalyst 3560
|
Cisco IOS 12.2(20)SE or higher
|
3560-24PS
|
1.2.6.1.4.1.9.1.563
|
3560-48PS
|
1.2.6.1.4.1.9.1.564
|
3560-24TS-S/-E
|
1.2.6.1.4.1.9.1.633
|
3560-48TS-S/-E
|
1.2.6.1.4.1.9.1.615
|
3560G-24TS-S/-E
|
1.2.6.1.4.1.9.1.634
|
3560G-48TS-S/-E
|
1.2.6.1.4.1.9.1.617
|
3560G-24PS-S/-E
|
1.2.6.1.4.1.9.1.614
|
3560G-48PS-S/-E
|
1.2.6.1.4.1.9.1.616
|
| |
3560-8PC-S
|
1.3.6.1.4.1.9.1.797
|
Catalyst 3560E
|
Cisco IOS Release 12.2(35)SE2 or higher
|
3560E-48TD-S
|
1.3.6.1.4.1.9.1.794
|
3560E-48TD-E
|
1.3.6.1.4.1.9.1.794
|
3560E-48PD-SF
|
1.3.6.1.4.1.9.1.796
|
3560E-48PD-S
|
1.3.6.1.4.1.9.1.796
|
3560E-48PD-EF
|
1.3.6.1.4.1.9.1.796
|
3560E-48PD-E
|
1.3.6.1.4.1.9.1.796
|
3560E-24TD-S
|
1.3.6.1.4.1.9.1.793
|
3560E-24TD-E
|
1.3.6.1.4.1.9.1.793
|
3560E-24PD-S
|
1.3.6.1.4.1.9.1.795
|
3560E-24PD-E
|
1.3.6.1.4.1.9.1.795
|
Catalyst 3750
|
Cisco IOS 12.2(20)SE or higher
|
3750-24
|
1.3.6.1.4.1.9.1.511
|
3750-24FS-S
|
1.3.6.1.4.1.9.1.656
|
3750-48
|
1.3.6.1.4.1.9.1.512
|
3750-24TS
|
1.3.6.1.4.1.9.1.513
|
3750-24T
|
1.3.6.1.4.1.9.1.514
|
37XX Stack
|
1.3.6.1.4.1.9.1.516
|
3750G-12Sfp
|
1.3.6.1.4.1.9.1.530
|
3750-48PS
|
1.3.6.1.4.1.9.1.535
|
3750-24PS
|
1.3.6.1.4.1.9.1.536
|
3750G-16TD
|
1.3.6.1.4.1.9.1.591
|
3750G-24PS
|
1.3.6.1.4.1.9.1.602
|
3750G-48PS
|
1.3.6.1.4.1.9.1.603
|
3750G-48TS
|
1.3.6.1.4.1.9.1.604
|
3750G-24TS1U
|
1.3.6.1.4.1.9.1.624
|
3750G-24TS1U/-EIU
|
1.3.6.1.4.1.9.1.624
|
Catalyst 3750E
|
Cisco IOS Release 12.2(35)SE2 or higher
|
3750E-48TD-S
|
1.3.6.1.4.1.9.1.790
|
3750E-48TD-E
|
1.3.6.1.4.1.9.1.790
|
3750E-48PD-SF
|
1.3.6.1.4.1.9.1.791
|
3750E-48PD-S
|
1.3.6.1.4.1.9.1.791
|
3750E-48PD-EF
|
1.3.6.1.4.1.9.1.791
|
3750E-48PD-E
|
1.3.6.1.4.1.9.1.791
|
3750E-24TD-S
|
1.3.6.1.4.1.9.1.789
|
3750E-24TD-E
|
1.3.6.1.4.1.9.1.789
|
3750E-24PD-S
|
1.3.6.1.4.1.9.1.792
|
3750E-24PD-E
|
1.3.6.1.4.1.9.1.792
|
Catalyst 3750ME
|
Cisco IOS 12.2(25)EY
|
3750-24TE-M
|
1.3.6.1.4.1.9.1.574
|
Catalyst 4000
|
Cisco IOS 12.1(13)EW
|
4000 C
|
1.3.6.1.4.1.9.1.448
|
4503
|
1.3.6.1.4.1.9.1.503
|
4506
|
1.3.6.1.4.1.9.1.502
|
4507
|
1.3.6.1.4.1.9.1.501
|
4510R
|
1.3.6.1.4.1.9.1.537
|
4948-S-S/-E
|
1.3.6.1.4.1.9.1.626
|
4948-10GE-S/-E
|
1.3.6.1.4.1.9.1.627
|
Catalyst 4000/4500
|
Catalyst OS 5.5 or higher
|
4003
|
1.3.6.1.4.1.9.5.40
|
4912 G
|
1.3.6.1.4.1.9.5.41
|
4006
|
1.3.6.1.4.1.9.5.46
|
4500
|
1.3.6.1.4.1.9.1.14
|
4503
|
1.3.6.1.4.1.9.5.58
|
4506
|
1.3.6.1.4.1.9.5.59
|
Catalyst 4900 Metro
|
|
ME-4924-10GE
|
1.3.6.1.4.1.9.1.706
|
Catalyst 4948
|
Cisco IOS 12.2(20)EWA
|
4948
|
1.3.6.1.4.1.9.1.626
|
4948-10GE
|
1.3.6.1.4.1.9.1.627
|
Catalyst 5000
|
Catalyst OS 6.x
|
5000
|
1.3.6.1.4.1.9.5.7
|
5002
|
1.3.6.1.4.1.9.5.29
|
Catalyst 5500
|
|
5500
|
1.3.6.1.4.1.9.5.17
|
5505
|
1.3.6.1.4.1.9.5.34
|
5509
|
1.3.6.1.4.1.9.5.36
|
Catalyst 6500
|
Catalyst OS
|
6503
|
1.3.6.1.4.1.9.5.56
|
6509 NEB-A chassis
|
1.3.6.1.4.1.9.5.61
|
Catalyst OS 5.5 or higher
If using an MSFC module, Cisco IOS 12.1(3a)XL
|
6006
|
1.3.6.1.4.1.9.5.38
|
6009
|
1.3.6.1.4.1.9.5.39
|
6509
|
1.3.6.1.4.1.9.5.44
|
6506
|
1.3.6.1.4.1.9.5.45
|
6509 SP
|
1.3.6.1.4.1.9.5.47
|
6513
|
1.3.6.1.4.1.9.5.50
|
Catalyst 6500
|
Cisco IOS
|
6503
|
1.3.6.1.4.1.9.1.449
|
6006
|
1.3.6.1.4.1.9.1.280
|
6009
|
1.3.6.1.4.1.9.1.281
|
6506
|
1.3.6.1.4.1.9.1.282
|
6509
|
1.3.6.1.4.1.9.1.283
|
6509 NEB-A chassis
|
1.3.6.1.4.1.9.1.534
|
6509 SP
|
1.3.6.1.4.1.9.1.310
|
6513
|
1.3.6.1.4.1.9.1.400
|
Cisco 2800 Integrated Services Routers
|
Cisco IOS 12.3(8)T4
|
Cisco 2811
Cisco 2821
Cisco 2851
|
1.3.6.1.4.1.9.1.576
|
1.3.6.1.4.1.9.1.577
|
1.3.6.1.4.1.9.1.578
|
Cisco 3725 Multiservice Access Router
|
Image version:
IOS 12.2(8)T5
|
|
1.3.6.1.4.1.9.1.414
|
Cisco 3745 Multiservice Access Router
|
Image version:
IOS 12.2(13)T
|
|
1.3.6.1.4.1.9.1.436
|
Cisco 3800 Integrated Services Routers
|
Cisco IOS
|
Cisco 3825
|
1.3.6.1.4.1.9.1.543
|
Cisco 3845
|
1.3.6.1.4.1.9.1.544
|
Cisco ER 2.0 supports the Cisco MCS Unified Communications Manager Appliance platforms shown in Table 5; Table 6 lists scalability for these platforms.
Note Cisco ER does not support Cisco Integrated Communications System (ICS) 7750 servers.
Table 5 lists the supported Media Convergence Server (MCS) platforms.
Table 5 Supported MCS Platforms
Cisco MCS Server
|
Equivalent OEM Server
|
CPU
|
MCS-7816-H3-IPC1
|
|
3.2 GHz
|
MCS-7816-I3-IPC1
|
|
3.2 GHz
|
MCS-7825H-2.2-EVV1
|
HP DL320-G2
|
2.26 GHz
|
MCS-7825H-3.0-IPC1
|
HP DL320-G2
|
3.06 GHz
|
MCS-7825I-3.0-IPC1
|
IBM x306
|
3.06 GHz
|
MCS-7825-H1-IPC1
|
HP DL320-G3
|
3.4 GHz
|
MCS-7825-I1-IPC1
|
IBM x306
|
3.4 GHz
|
MCS-7825-H2-IPC1
|
HP DL320-G4
|
2.8 GHz
|
MCS-7825-I2-IPC1
|
IBM x306m
|
2.8 GHz
|
MCS-7825-H2-IPC2
|
HP DL320-G4
|
3.4 GHz
|
MCS-7825-I2-IPC2
|
IBM x306m
|
3.4 GHz
|
MCS-7825-H3-IPC1
|
HP DL320-G5
|
2.13 GHz
|
MCS-7825-I3-IPC1
|
IBM x3250
|
2.13 GHz
|
MCS-7835H-2.4-EVV1
|
HP DL380-G3 (1 CPU)
|
2.4 GHz
|
MCS-7835I-2.4-EVV1
|
IBM x345 (1 CPU)
|
2.4 GHz
|
MCS-7835H-3.0-IPC1
|
HP DL380-G3 (1 CPU)
|
3.06 GHz
|
MCS-7835I-3.0-IPC1
|
IBM x345 (1 CPU)
|
3.06 GHz
|
MCS-7835-H1-IPC1
|
HP DL380-G4 (1 CPU)
|
3.4 GHz
|
MCS-7835-I1-IPC1
|
IBM x346 (1 CPU)
|
3.4 GHz
|
MCS-7835-H2-IPC1
|
HP DL380-G5 (1 CPU)
|
2.33 GHz
|
MCS-7835-I2-IPC1
|
IBM x3650 (1 CPU)
|
2.33 GHz
|
MCS-7845H-2.4-EVV1
|
HP DL380-G3 (2 CPUs)
|
2.4 GHz
|
MCS-7845H-3.0-IPC1
|
HP DL380-G3 (2 CPUs)
|
3.06 GHz
|
MCS-7845I-3.0-IPC1
|
IBM x345 (2 CPUs)
|
3.06 GHz
|
MCS-7845-H1-IPC1
|
HP DL380-G4 (2 CPUs)
|
3.4 GHz
|
MCS-7845-I1-IPC1
|
IBM x346 (2 CPUs)
|
3.4 GHz
|
MCS-7845-H2-IPC1
|
HP DL380-G5 (2 CPUs)
|
2.33 GHz
|
MCS-7845-I2-IPC1
|
IBM x3650 (2 CPUs)
|
2.33 GHz
|
MCS-7815I-3.0-IPC1
|
|
3.06 GHz
|
MCS-7815I-3.0-IPC2
|
|
3.06 GHz
|
MCS-7815-I1-IPC1
|
|
3.4 GHz
|
MCS-7815-I1-IPC2
|
|
3.4 GHz
|
MCS-7815-I1-IPC3
|
|
3.4 GHz
|
MCS-7815-I1-IPC4
|
|
3.4 GHz
|
MCS-7815-I2-IPC1
|
|
2.8 GHz
|
Note The following servers are supported for upgrades from Cisco ER 1.x only and are not supported for new installations: MCS-7815I-3.0-IPC1, MCS-7815I-3.0-IPC2, MCS-7815-I1-IPC1, MCS-7815-I1-IPC2, MCS-7815-I1-IPC3, MCS-7815-I1-IPC4, and MCS-7815-I2-IPC1.
Note Cisco ER 2.0 requires a minimum of 2GB RAM and a 72GB hard drive.
Table 6 shows the scalability of supported MCS platforms.
Table 6 Supported Cisco ER 2.0 MCS Platforms and Scalability
Scalability
|
Cisco MCS 7825 Media
Convergence
Servers
|
Cisco MCS 7835 Media
Convergence
Servers
|
Cisco MCS 7845 Media
Convergence
Servers
|
Switches
|
500
|
1,000
|
2,000
|
Switch Ports
|
30,000
|
60,000
|
120,000
|
Manual Phones
|
2,500
|
5,000
|
10,000
|
Roaming Phones (remote Cisco ER group)
|
1,200 per Cisco ER cluster
|
2,000 per Cisco ER cluster
|
3,000 per Cisco ER cluster
|
IP Phones
|
12,000
|
20,000
|
30,000
|
Related Documentation
Cisco Emergency Responder Documentation
Refer to the publications for Cisco ER 2.0. Navigate from the following documentation URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps842/tsd_products_support_series_home.html
Cisco Unified Communications Manager Documentation
Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
New and Changed Information
The following new features are available in Cisco Emergency Responder 2.0:
•Installation and upgrade using a single DVD
•FLEXlm licensing
•Role-based user management
•Disaster recovery
•Data migration using the Cisco Data Migration Assistant (DMA)
•Cisco ER 2.0 clusters can include both Cisco ER 2.0 and Cisco ER 1.3 server groups
•HTTPS supported in Cisco ER 2.0 server groups
•Support for additional IP phones
•Unlocated phone search allows user to search for a specific unlocated phone
•Ability to download the results of a Call History search
•Integrated ALI Formatting Tool (AFT) for all supported service providers
Installation Notes
This section describes upgrade information for Cisco ER 2.0(1) and includes these topics:
•Supported Upgrades
•Important Upgrade Notes
Supported Upgrades
You must upgrade to Cisco ER 2.0 from Cisco ER 1.3.x only. You cannot upgrade directly to Cisco ER 2.0 from earlier versions of Cisco ER, or download Cisco ER 2.0 from the Cisco.com website.
Important Upgrade Notes
Once you upgrade your system to Cisco ER 2.0, you cannot downgrade your system to earlier Cisco ER versions.
Caveats
This section includes these topics:
•Using Bug Toolkit
•Open Caveats
•Resolved Caveats
Using Bug Toolkit
Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:
•All severity level 1 or 2 bugs.
•Significant severity level 3 bugs.
You can search for problems by using the Cisco Software Bug Toolkit.
To access Bug Toolkit, you need the following items:
•Internet connection
•Web browser
•Cisco.com user ID and password
To use the Software Bug Toolkit, follow these steps:
Procedure
Step 1 To access the Bug Toolkit, go to http://www.cisco.com/pcgi-bin/Support/Bugtool/home.pl.
Step 2 Log on with your Cisco.com user ID and password.
Step 3 To look for information about a specific problem, enter the bug ID number in the "Search for Bug ID" field and click Go.
Open Caveats
Table 7 lists Severity 1, 2 and 3 defects that are open for Cisco ER 2.0(1).
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, be aware that Table 7 reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in the Using Bug Toolkit.
Resolved Caveats
There are no resolved defects for Cisco ER 2.0(1).
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Acknowledgements
This product includes software developed by Justin Wells and Semiotek Inc. for use in the WebMacro Servlet Framework (http://www.webmacro.org).
You may use WebMacro for use under the GNU General Public License. You may also use WebMacro under the terms of the Semiotek Public License. The terms of the Semiotek Public License are as follows:
Copyright (c) 1997, 1998, 1999, 2000 Semiotek Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by Justin Wells and Semiotek Inc. for use in the WebMacro Servlet Framework (http://www.webmacro.org)."
4. The names "Semiotek Inc." and "WebMacro" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact justin@webmacro.org
5. Products derived from this software may not be called "WebMacro" nor may "WebMacro" appear in their names without prior written permission of Justin Wells.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by Justin Wells and Semiotek Inc. for use in the WebMacro Servlet Framework (http://www.webmacro.org)."
THIS SOFTWARE IS PROVIDED BY SEMIOTEK INC. "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SEMIOTEK INC. OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, Packet, PIX, ProConnect, ScriptShare, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R)
© 2007 Cisco Systems, Inc. All rights reserved.
