Installation and Upgrade Guide for Cisco Unified Videoconferencing 3522 BRI Gateway and 3527 PRI Gateway Releases 5.6 and 5.7
Technical Specifications

Table Of Contents

Technical Specifications


Technical Specifications


Table 5-1 Cisco Unified Videoconferencing 3500 Gateway Unit Technical Specifications 

Unit Dimensions

Height: 1U (1.75 inches or 44.45 mm)

Width: 17.25 inches (438.15 mm)

Depth: 10 inches (254 mm)

Weight: 4.45 kg (9.81 lbs)—may vary according to configuration

LED Indicators
 

Front panel

ETHERNET:

Link

Connection Speed

GK Reg

CD

ALARM

ACT

Rear panel (Cisco Unified Videoconferencing 3527 PRI Gateway)

ACT

CD

ALARM

Rear panel (Cisco Unified Videoconferencing 3522 BRI Gateway)

ACT 1 to 4

Push Buttons

RST (front panel)

Communication Interfaces

Front panel

Ethernet 10/100 Mbps auto-negotiate speed select

Asynchronous serial port RS-232 connected via 9-pin D-type connector

RJ-45 serial port (for video processing module)

SVGA port (for video processing module)

USB connector (for video processing module)

Rear panel (Cisco Unified Videoconferencing 3527 PRI Gateway)

1 x ISDN E1/T1 PRI port:

T1 mode

Channels: 23B + 1D

Clock rate: 1.544 Mbps

Framing: ESF or D4

Encoding: B8ZS or AMI

Line impedance: 100W

E1 mode

Channels: 30B + 1D

Clock rate: 2.048 Mbps

Framing: G.704 with CRC4

Encoding: HDB3 or AMI

Line impedance: 120W

Rear panel (Cisco Unified Videoconferencing 3522 BRI Gateway)

4 x ISDN BRI ports

Chipset

PowerPC MPC755 32-bit RISC microprocessor running at 400MHz or more

MPC8260 secondary microprocessor running at 200/133MHz or more

Operating System

RTOS, VxWorks 5.4

Memory

32 MB on-board flash memory for field upgrades, supports up to 64 MB

1 MB L-2 Cache at 200 MHz or more

128 MB SDRAM, supports up to 256 MB

Failsafe

Watchdog timer built in

Power Supply

Input 100-240VAC autoswitched

Output + 3.3VDC, + 5VDC, + 12VDC

Maximum power load 150W