Platform Guide for Cisco Unified Videoconferencing 3545 System Chassis Release 5.x
Technical Specifications

Table Of Contents

Technical Specifications

Technical Specifications Table


Technical Specifications


This section provides technical specifications for the Cisco Unified Videoconferencing 3545 chassis.

Technical Specifications Table

Table 4-1 Cisco Unified Videoconferencing 3545 Chassis Technical Specifications 

Chassis Dimensions

Height: 2U (3.5 inches or 88.9 mm)

Width: 17.25 inches (438.15 mm)

Depth: 10 inches (254 mm)

Weight: 8 kg (17.64 lbs) empty, 11 kg (24.25 lbs) full—may vary according to configuration

Element Board Dimensions

Width: 9.19 inches (233.35 mm)

Depth: 6.3 inches (160 mm)

RTM Board Dimensions

Width: 9.19 inches (233.35 mm)

Depth: 3.15 inches (80 mm)

System Monitoring LED Indicators

POWER

ALARM

FAN

TEMP

Board LED Indicators

Front panel

ETHERNET:

Link

Connection Speed

GK Reg

CPU High (MCU only)

CD (gateways only)

ALARM

ACT

MC (EMP only)

Rear panel (Cisco Unified Videoconferencing 3545 PRI Gateway)

PRI 1 or 2:

ACT

D-Ch

ALRM

Rear panel (Cisco Unified Videoconferencing 3545 Serial Gateway)

PORT 1 to 4:

ACT

ALARM

Push Buttons

RST (front panel)

Communication Interfaces

Front panel

Ethernet 10/100 Mbps auto-negotiate speed select

Asynchronous serial port RS-232 connected via 9-pin D-type connector

Rear panel (Cisco Unified Videoconferencing 3545 PRI Gateway)

2 x ISDN E1/T1 PRI port:

T1 mode

Channels: 23B + 1D

Clock rate: 1.544 Mbps

Framing: F4, F12, ESF no CRC, ESF, F72

Encoding: NRZ, AMI-B7, B8ZS

Line impedance: 100W

E1 mode

Channels: 30B + 1D

Clock rate: 2.048 Mbps

Framing: Double framing, CRC4, Extended CRC4

Encoding: NRZ, CMI, AMI, HDB3

Line impedance: 120W

Rear panel (Cisco Unified Videoconferencing 3545 Serial Gateway)

4 x serial ports

Chipset

PowerPC MPC7410 32-bit RISC microprocessor running at 500MHz.

MPC8260 communication processor running at 300/200MHz.

Operating System

RTOS, VxWorks 5.4

Memory

32 MB on-board flash memory for field upgrades

2 MB L-2 Cache at 250MHz

128 MB SDRAM

Failsafe

Watchdog timer built in

Power supply

Dual power supply units

Full redundancy

Power on/alarm LED on each unit.

Input 100-240VAC, 50/60Hz, autoswitched

Output + 3.3VDC, + 5VDC, ± 12VDC

Maximum power load 300W

Ventilation Fans

2 fan units

Brushless 12V DC motor

Locked rotor detection

Polarity protection

Auto-restart capability