Cisco Virtual Network Management Center CLI Configuration Guide, Release 1.0.1 - Managing Policies [Cisco Virtual Network Management Center]

Table Of Contents

Managing Policies

Working With Core File Policies

Creating a Core File Policy

Deleting a Core File Policy

Displaying Core File Policies

Working With Fault Policies

Creating a Fault Policy

Deleting a Fault Policy

Displaying Fault Policies

Working With Log Policies

Creating a Log Policy

Deleting a Log Policy

Displaying Log Policies

Working With Syslog Policies

Creating a Syslog Policy

Deleting a Syslog Policy

Displaying Syslog Policies

Managing Policies

This chapter provides information about managing policies.

This chapter includes the following sections:

•Working With Core File Policies

•Working With Fault Policies

•Working With Log Policies

•Working With Syslog Policies

Working With Core File Policies

This section includes the following topics:

•Creating a Core File Policy

•Deleting a Core File Policy

•Displaying Core File Policies

Creating a Core File Policy

You can create core file policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. create corefile <policy-name> <transfer-host-name> <policy-path> {disabled | enabled}

5. commit-buffer

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
create corefile
Example
vnmc(policy-mgr) /org/policy # create corefile EaCoreP12 P1 P2 /test enabled
Creates a core file policy.

For the policy name, the maximum number of characters is 511.
Step 5
commit-buffer
Example:
vnmc(policy-mgr) /org/policy/corefile* # commit-buffer
Commits (saves) the configuration.
EXAMPLES

This example shows how to create a core file policy:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org
vnmc(policy-mgr) /org # scope policy
vnmc(policy-mgr) /org/policy # create corefile EaCoreP12 P1 P2 /test enabled
vnmc(policy-mgr) /org/policy/corefile* # commit-buffer
vnmc(policy-mgr) /org/policy/corefile # 
Deleting a Core File Policy

You can delete core file policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. delete corefile <policy-name>

5. commit-buffer

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
delete corefile
Example
vnmc(policy-mgr) /org/policy # delete corefile EaCoreP12
Deletes a core file policy.
Step 5
commit-buffer
Example:
vnmc(policy-mgr) /org/policy * # commit-buffer
Commits (saves) the configuration.
EXAMPLES

This example shows how to delete the core file:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org
vnmc(policy-mgr)# scope policy
vnmc(policy-mgr) /org/policy # delete corefile EaCoreP12
vnmc(policy-mgr) /org/policy* # commit-buffer
vnmc(policy-mgr) /org/policy # 
Displaying Core File Policies

You can display core file policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. show corefile

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
show corefile
Example
vnmc(policy-mgr) /org/policy # show corefile
Displays core file policies.
EXAMPLES

This example shows how to display all core file policies in list form:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org
vnmc(policy-mgr) /org # scope policy
vnmc(policy-mgr) /org/policy # show corefile
Core File Policy:
    Core File Policy Name: local
    Core File Transfer Host Name: nexthost
    Core File Policy Path: /test
    Core File Policy Admin State: Enabled
    Core File Policy Name: host
    Core File Transfer Host Name: nexthost
    Core File Policy Path: /test
    Core File Policy Admin State: Enabled
vnmc(policy-mgr) /org/policy # 
Working With Fault Policies

This section includes the following topics:

•Creating a Fault Policy

•Deleting a Fault Policy

•Displaying Fault Policies

Creating a Fault Policy

You can create fault policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. create faultpolicy <policy-name> <flap-interval> {delete | retain} {<number-of-days> | forever} {disabled | enabled}

5. commit-buffer

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
create faultpolicy
Example
vnmc(policy-mgr) /org/policy # create faultpolicy EaFaultPA13 10 retain forever enabled
Creates a fault policy.

For the policy name, the maximum number of characters is 511.
Step 5
commit-buffer
Example:
vnmc(policy-mgr) /org/policy/faultpolicy* # commit-buffer
Commits (saves) the configuration.
EXAMPLES

This example shows how to create a fault policy named EaFaultPA13:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org
vnmc(policy-mgr) /org # scope policy
vnmc(policy-mgr) /org/policy # create faultpolicy EaFaultPA13 10 retain forever enabled
vnmc(policy-mgr) /org/policy/faultpolicy* # commit-buffer
vnmc(policy-mgr) /org/policy/faultpolicy # 
Deleting a Fault Policy

You can delete fault policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. delete faultpolicy <policy-name>

5. commit-buffer

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
delete faultpolicy
Example
vnmc(policy-mgr) /org/policy # delete faultpolicy EaFaultPA13
Deletes a fault policy.
Step 5
commit-buffer
Example:
vnmc(policy-mgr) /org/policy* # commit-buffer
Commits (saves) the configuration.
EXAMPLES

This example shows how to delete a fault policy named sysfault:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org
vnmc(policy-mgr) /org # scope policy
vnmc(policy-mgr) /org/policy # delete faultpolicy EaFaultPA13
vnmc(policy-mgr) /org/policy* # commit-buffer
vnmc(policy-mgr) /org/policy # 
Displaying Fault Policies

You can display fault policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. show faultpolicy

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
show faultpolicy
Example
vnmc(policy-mgr) /org/policy # show faultpolicy
Displays fault policies.
EXAMPLES

This example shows how to display all fault policies in list form:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org
vnmc(policy-mgr) /org # scope policy
vnmc(policy-mgr) /org/policy # show faultpolicy
Fault Policy:
    Fault Policy Name: default
    Fault Policy Clear Action: Retain
    Fault Policy Flap Interval (dd:hh:mm:ss): 00:00:00:10
    Fault Policy Retention Interval (dd:hh:mm:ss): 10:00:00:00
    Fault Policy Admin State: Enabled
    Fault Policy Name: EaFaultPA13
    Fault Policy Clear Action: Retain
    Fault Policy Flap Interval (dd:hh:mm:ss): 00:00:00:05
    Fault Policy Retention Interval (dd:hh:mm:ss): 100:00:00:00
    Fault Policy Admin State: Enabled
Working With Log Policies

This section includes the following topics:

•Creating a Log Policy

•Deleting a Log Policy

•Displaying Log Policies

Creating a Log Policy

You can create log policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. create log <policy-name> <log-policy-backup-count> {crit | debug0 | debug1 | debug3 | debug4 | info | major | minor | warn} <log-policy-size>

5. commit-buffer

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
create log
Example
vnmc(policy-mgr) /org/policy # create log EaLogP13 9 crit 10000000
Creates a log policy.

For the policy name, the maximum number of characters is 511.
Step 5
commit-buffer
Example:
vnmc(policy-mgr) /org/policy/log* # commit-buffer
Commits (saves) the configuration.
EXAMPLES

This example shows how to create a log policy named EaLogP13:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org 
vnmc(policy-mgr) /org # scope policy 
vnmc(policy-mgr) /org/policy # create log EaLogP13 9 crit 10000000
vnmc(policy-mgr) /org/policy/log* # commit-buffer 
vnmc(policy-mgr) /org/policy/log # 
Deleting a Log Policy

You can delete fault policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. delete log <policy-name>

5. commit-buffer

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
delete log
Example
vnmc(policy-mgr) /org/policy # delete log EaLogP13
Deletes a log policy.
Step 5
commit-buffer
Example:
vnmc(policy-mgr) /org/policy* # commit-buffer
Commits (saves) the configuration.
EXAMPLES

This example shows how to delete a log policy named EaLogP13:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org
vnmc(policy-mgr) /org # scope policy
vnmc(policy-mgr) /org/policy # delete log EaLogP13
vnmc(policy-mgr) /org/policy* # commit-buffer
vnmc(policy-mgr) /org/policy # 
Displaying Log Policies

You can display log policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. show log

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
show log
Example
vnmc(policy-mgr) /org/policy # show log
Displays log policies.
EXAMPLES

This example shows how to display all log policies in list form:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org
vnmc(policy-mgr) /org # scope policy
vnmc(policy-mgr) /org/policy # show log 
Logging Policy:
    Logging Policy Name: LogPA1
    Logging Policy Backup Count: 2
    Logging Policy Level: Debug1
    Logging Policy Size: 10000000
    Logging Policy Admin State: Enabled
    Logging Policy Name: LogPA2
    Logging Policy Backup Count: 1
    Logging Policy Level: Crit
    Logging Policy Size: 1000000
    Logging Policy Admin State: Enabled
vnmc(policy-mgr) /org/policy # 
Working With Syslog Policies

This section includes the following topics:

•Creating a Syslog Policy

•Deleting a Syslog Policy

•Displaying Syslog Policies

Creating a Syslog Policy

You can create syslog policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. create syslog <policy-name>

5. commit-buffer

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
create syslog
Example
vnmc(policy-mgr) /org/policy # create syslog EaSysPA13
Creates a syslog policy.

For the policy name, the maximum number of characters is 511.
Step 5
commit-buffer
Example:
vnmc(policy-mgr) /org/policy/syslog* # commit-buffer
Commits (saves) the configuration.
EXAMPLES

This example shows how to create a log policy named EaSysPA13:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org 
vnmc(policy-mgr) /org # scope policy 
vnmc(policy-mgr) /org/policy # create syslog EaSysPA13
vnmc(policy-mgr) /org/policy/syslog* # commit-buffer 
vnmc(policy-mgr) /org/policysyslog # 
Deleting a Syslog Policy

You can delete syslog policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. delete syslog <policy-name>

5. commit-buffer

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
delete syslog
Example
vnmc(policy-mgr) /org/policy # delete syslog EaSysPA13
Deletes a syslog policy.
Step 5
commit-buffer
Example:
vnmc(policy-mgr) /org/policy* # commit-buffer
Commits (saves) the configuration.
EXAMPLES

This example shows how to delete a log policy named EaSysPA13:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org
vnmc(policy-mgr)# scope policy
vnmc(policy-mgr) /org/policy # delete syslog EaSysPA13
vnmc(policy-mgr) /org/policy* # commit-buffer
vnmc(policy-mgr) /org/policy # 
Displaying Syslog Policies

You can display syslog policies.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Policy manager

SUMMARY STEPS

1. connect policy-mgr

2. scope org

3. scope policy

4. show syslog

DETAILED STEPS
Command

Purpose
Step 1
connect policy-mgr
Example:
vnmc# connect policy-mgr
Places you in the policy manager CLI.
Step 2
scope org
Example:
vnmc(policy-mgr)# scope org
Places you in organization mode.
Step 3
scope policy
Example:
vnmc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4
show syslog
Example
vnmc(policy-mgr) /org/policy # show syslog
Displays syslog policies.
EXAMPLES

This example shows how to display all log policies in list form:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope org
vnmc(policy-mgr) /org # scope policy
vnmc(policy-mgr) /org/policy # show syslog
name: default
description: Syslog Service
name: EaSysPA13
description: Syslog Service
vnmc(policy-mgr) /org/policy # 