Contents

• Managing Time Zones
• Time Zones
• Setting the Time Zone
• Adding an NTP Server
• Deleting an NTP Server

Managing Time Zones

---

This chapter includes the following sections:

• Time Zones
• Setting the Time Zone
• Adding an NTP Server
• Deleting an NTP Server

Time Zones

Cisco UCS requires an instance-specific time zone setting and an NTP server to ensure the correct time display in Cisco UCS Manager. If you do not configure both of these settings in a Cisco UCS instance, the time does not display correctly.

Setting the Time Zone

Procedure

---

Step 1	In the Navigation pane, click the Admin tab.
Step 2	In the Admin tab, expand All.
Step 3	Click Timezone Management.
Step 4	In the Work pane, click the General tab.
Step 5	From the Timezone drop-down list, select the time zone you want to use for the Cisco UCS instance.
Step 6	Click Save Changes.

---

Adding an NTP Server

Procedure

---

Step 1	In the Navigation pane, click the Admin tab.
Step 2	In the Admin tab, expand All.
Step 3	Click Timezone Management.
Step 4	In the Work pane, click the General tab.
Step 5	In the NTP Servers area, click the + button on the table icon bar.
Step 6	In the Add NTP Server dialog box, do the following: In the NTP Server field, enter the IP address or hostname of the NTP server you want to use for this Cisco UCS instance. Click OK.

---

Deleting an NTP Server

Procedure

---

Step 1	In the Navigation pane, click the Admin tab.
Step 2	In the Admin tab, expand All.
Step 3	Click Timezone Management.
Step 4	In the Work pane, click the General tab.
Step 5	In the NTP Servers area, right-click the server you want to delete and select Delete.
Step 6	If Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Step 7	Click Save Changes.

---