Contents

• Managing the I/O Modules
• I/O Module Management in Cisco UCS Manager GUI
• Resetting an I/O Module
• Viewing the POST Results for an I/O Module

Managing the I/O Modules

---

This chapter includes the following sections:

• I/O Module Management in Cisco UCS Manager GUI
• Resetting an I/O Module
• Viewing the POST Results for an I/O Module

I/O Module Management in Cisco UCS Manager GUI

You can manage and monitor all I/O modules in a Cisco UCS instance through Cisco UCS Manager GUI.

Resetting an I/O Module

Procedure

---

Step 1	In the Navigation pane, click the Equipment tab.
Step 2	On the Equipment tab, expand Equipment > Chassis > Chassis Number > IO Modules.
Step 3	Choose the I/O module that you want to reset.
Step 4	In the Work pane, click the General tab.
Step 5	In the Actions area, click Reset IO Module.
Step 6	If Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.

---

Viewing the POST Results for an I/O Module

You can view any errors collected during the Power On Self-Test process for an I/O module.

Procedure

---

Step 1	In the Navigation pane, click the Equipment tab.
Step 2	On the Equipment tab, expand Equipment > Chassis > Chassis Number > IO Modules.
Step 3	Choose the I/O module for which you want to view the POST results.
Step 4	In the Work pane, click the General tab.
Step 5	In the Actions area, click View POST Results. The POST Results dialog box lists the POST results for the I/O module.
Step 6	Click OK to close the POST Results dialog box.

---