On rare occasions, such as an issue with
the current running firmware, troubleshooting a server may require you to reset
the CIMC. This procedure is not part of the normal maintenance of a server.
After you reset the CIMC, the server boots with the running version of the
firmware for that server.
The following example resets the BMC for server 4 in chassis 2 and commits the transaction:
UCS-A# scope server 2/4
UCS-A /chassis/server # scope bmc
UCS-A /chassis/server/cimc # reset
UCS-A /chassis/server/cimc* # commit-buffer
UCS-A /chassis/server/cimc #