Table Of Contents
This appendix lists the technical specifications for the Cisco UCS 5108 server chassis and includes the following sections:
Table A-1 lists the specifications for the chassis.
Table A-2 lists the weight of individual chassis components and the weight of a fully populated chassis.
Table A-2 Weight of the Chassis Components
90 lbs (40.83 kg)
2.5 lbs (1.13 kg)
1.8 lbs (0.82 kg)
B200 Blade Server
13.5 lbs (6.1 kg) 1
B230 Blade Server
18.0 lbs (8.16 kg) 1
B250 Blade Server
25 lbs (11.34 kg) 1
B440 Blade Server
34.5 lbs (15.65 kg) 1
0.8 lbs (0.36 kg)
Fully Populated UCS 5108 Server Chassis
Approximately 255 lbs (115.66 kg), depending on models and options selected
1 The system weight listed here is an estimate for a fully configured system and will vary depending on peripheral devices installed.
Table A-3 lists the environmental specifications for the chassis.
This section includes the following topics:
Specifications for the Cisco UCS 5108 Server Chassis Power Supply
Table A-4 lists the specifications for each Cisco UCS chassis Gold AC power supply. Table A-5 lists the specifications for each Cisco UCS chassis Platinum AC power supply. Table A-6 lists the specifications for each Cisco UCS chassis DC power supply.
Environmental Conditions and Power Requirement Specifications for Twinax SFP+ Transceivers
Table A-7 lists the environmental conditions and power requirement specifications for the 10-Gb Ethernet SFP+ transceiver.
Table A-7 Environmental Conditions and Power Requirement for the SFP+ Transceiver
Parameter Symbol Min. Max. Unit
Module supply voltage
Cable and Power Cord Specifications
This appendix provides cabling and port specifications for control devices and power connections and includes the following sections:
The KVM cable (N20-BKVM) provides a connection into a Cisco UCS 5108 blade server, providing a DB9 serial connector, a VGA connector for a monitor, and dual USB ports for a keyboard and mouse. With this cable you can create a direct connection to the operating system and the BIOS running on a blade server.
Figure A-1 KVM Cable for Blade Servers
Connector to blade server slot
DB9 serial connector
VGA connection for a monitor
2-port USB connector for a mouse and keyboard
Supported AC Power Cords and Plugs
Each chassis power supply has a separate power cord. Standard power cords or jumper power cords are available for connection to a power distribution unit that has IEC 60320 C19 outlet receptacles (such as a Cisco RP Series PDU). The jumper power cords, for use in racks, are available as an optional alternative to the standard power cords. For more information, contact your Cisco Systems representative.
The standard power cords have an IEC C19 connector on the end that plugs into the Power Distribution Unit (PDU), which is located in the bottom slot at the rear of the chassis. The optional jumper power cords have an IEC C19 connector on the end that plugs into the chassis' PDU and an IEC C20 connector on the end that plugs into an IEC C19 outlet receptacle.
Note Only the regular power cords or jumper power cords provided with the chassis are supported.
Table A-8 lists the power cords.