Contents

• Viewing Server Sensors
• Viewing the Fault Summary
• Viewing Temperature Sensors
• Viewing Voltage Sensors
• Viewing LED Sensors
• Viewing Storage Sensors

Viewing Server Sensors

---

This chapter includes the following sections:

• Viewing the Fault Summary
• Viewing Temperature Sensors
• Viewing Voltage Sensors
• Viewing LED Sensors
• Viewing Storage Sensors

Viewing the Fault Summary

Procedure

---

Step 1	In the Navigation pane, click the Server tab.
Step 2	On the Server tab, click Fault Summary.
Step 3	In the Discrete Sensors area, review the following information: Name Description Sensor Name column The name of the sensor. Status column The status of the sensor. This can be one of the following: Critical Non-Recoverable Warning Reading column This can be one of the following: absent present
Step 4	In the Threshold Sensors area, review the following information: Name Description Sensor Name column The name of the sensor. Status column The status of the sensor. This can be one of the following: Critical Non-Recoverable Warning Reading column The value reported by the sensor. Units column The units in which the sensor data is reported. Warning Threshold Min column The minimum warning threshold. Warning Threshold Max column The maximum warning threshold. Critical Threshold Min column The minimum critical threshold. Critical Threshold Max column The maximum critical threshold.

---

Viewing Temperature Sensors

Procedure

---

Step 1	In the Navigation pane, click the Server tab.
Step 2	On the Server tab, click Sensors.
Step 3	In the Sensors pane, click the Temperature tab.
Step 4	View the following temperature-related statistics for the server: Tip    Click a column header to sort the table rows according to the entries in that column. Name Description Sensor Name column The name of the sensor. This can be one of the following: TEMP_AMB_X— Ambient temperature, obtained from sensors located inside the module. P1_TEMP_SENS—Processor core temperature. DDR3_P1_X0_TMP—Memory module temperature. Status column The status of the sensor. This can be one of the following: Unknown Informational Normal Warning Critical Non-Recoverable Temperature column The current temperature, in Celsius. Warning Threshold Min column The minimum warning threshold. Warning Threshold Max column The maximum warning threshold. Critical Threshold Min column The minimum critical threshold. Critical Threshold Max column The maximum critical threshold.

---

Viewing Voltage Sensors

Procedure

---

Step 1	In the Navigation pane, click the Server tab.
Step 2	On the Server tab, click Sensors.
Step 3	In the Sensors pane, click the Voltage tab.
Step 4	View the following voltage-related statistics for the server: Tip    Click a column header to sort the table rows according to the entries in that column. Name Description Sensor Name column The name of the sensor. Status column The status of the sensor. This can be one of the following: Unknown Informational Normal Warning Critical Non-Recoverable Voltage column The current voltage, in volts. Warning Threshold Min column The minimum warning threshold. Warning Threshold Max column The maximum warning threshold. Critical Threshold Min column The minimum critical threshold. Critical Threshold Max column The maximum critical threshold.

---

Viewing LED Sensors

Procedure

---

Step 1	In the Navigation pane, click the Server tab.
Step 2	On the Server tab, click Sensors.
Step 3	In the Sensors pane, click the LEDs tab.
Step 4	View the following LED-related statistics for the server: Name Description Sensor Name column The name of the sensor. This can be one of the following: LED_HLTH_STATUS—Overall system health status. LED_SYS_ACT—System activity, indicates if the system is powered on and has finished booting. LED State column Whether the LED is on, blinking, or off. LED Color column The current color of the LED. For details about what the colors mean, see the hardware installation guide for the type of server you are using.

---

Viewing Storage Sensors

Procedure

---

Step 1	In the Navigation pane, click the Server tab.
Step 2	On the Server tab, click Sensors.
Step 3	In the Sensors pane, click the Storage tab.
Step 4	View the following storage-related statistics for the server: Name Description Name column The name of the storage device. This can be: HDDX_PRS—Indicates the presence or absence of each hard drive. Status column A brief description of the status of the storage device.

---