Contents

• Viewing Server Properties
• Viewing CPU Properties
• Viewing Memory Properties
• Viewing Power Supply Properties
• Viewing Storage Properties

Viewing Server Properties

---

This chapter includes the following sections:

• Viewing CPU Properties
• Viewing Memory Properties
• Viewing Power Supply Properties
• Viewing Storage Properties

Viewing CPU Properties

Procedure

---

Step 1	In the Navigation pane, click the Server tab.
Step 2	On the Server tab, click Inventory.
Step 3	In the Inventory pane, click the CPUs tab.
Step 4	Review the following information for each CPU: Name Description Socket Name field The socket in which the CPU is installed. Serial Number field The serial number for the CPU. Vendor field The vendor for the CPU. Version field The CPU version. Number of Cores field The number of cores in the CPU. Signature field The CPU signature. Max Speed field The maximum CPU speed supported by the socket. Number of Threads field The maximum number of threads that the CPU can process concurrently.

---

Viewing Memory Properties

Procedure

---

Step 1	In the Navigation pane, click the Server tab.
Step 2	On the Server tab, click Inventory.
Step 3	In the Inventory pane, click the Memory tab.
Step 4	Review the following information about memory: Tip    Click a column header to sort the table rows, according to the entries in that column. Name Description Name column The name of the DIMM slot in which the memory module is installed. Capacity column The size of the DIMM, in megabytes. Speed column The clock speed of the memory module, in megahertz. Type column The memory type.

---

Viewing Power Supply Properties

Procedure

---

Step 1	In the Navigation pane, click the Server tab.
Step 2	On the Server tab, click Inventory.
Step 3	In the Inventory pane, click the Power Supplies tab.
Step 4	Review the following information for each power supply: Tip    Click a column header to sort the table rows, according to the entries in that column. Name Description Device ID column The identifier for the power supply unit. Input column The input into the power supply, in watts. Max Output column The maximum output from the power supply, in watts. FW Version column The firmware version for the power supply.

---

Viewing Storage Properties

Procedure

---

Step 1	In the Navigation pane, click the Server tab.
Step 2	On the Server tab, click Inventory.
Step 3	In the Inventory pane, click the Storage tab.
Step 4	Review the following information about storage: Tip    Click a column header to sort the table rows, according to the entries in that column. Name Description Name column The name of the storage device. Status column The status of the storage device. This can be: absent present

---