MGX and SES Error Messages, Release 4
MGX and SES Error Messages, Release 4 (part A2)
-
MGX and SES Error Messages, Release 4
-
Preface to MGX and SES Error Messages, Release 4
-
MGX and SES Error Messages, Release 4 (part A1)
-
MGX and SES Error Messages, Release 4 (part A2)
-
MGX and SES Error Messages, Release 4 (part A3)
-
MGX and SES Error Messages, Release 4 (part A4)
-
MGX and SES Error Messages, Release 4 (part B1)
-
MGX and SES Error Messages, Release 4 (part B2)
-
MGX and SES Error Messages, Release 4 (part B3)
-
MGX and SES Error Messages, Release 4 (part B4)
-
MGX and SES Error Messages, Release 4 (part C1)
-
MGX and SES Error Messages, Release 4 (part C2)
-
MGX and SES Error Messages, Release 4 (part C3)
-
MGX and SES Error Messages, Release 4 (part C4)
-
MGX and SES Error Messages, Release 4.0.10 (part D)
-
Download this chapter
Download the complete book
Feedback
Table Of Contents
DDTS "control-point/pxm-connmgm"
CBC-4-CBC_UTIL_ERR
SEVERITY: ErrorFORMAT: "Err %s() params %d,%d,%d,%d %s"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "RAM access failed."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: No Required InfoCBC-4-CBC_HMM_ERR
SEVERITY: ErrorFORMAT: "%s() cbc_num=%d,%d,%d,%d %s"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "CBC HMM Event."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: No Required InfoCBC-5-INVALID_ARG
SEVERITY: WarningFORMAT: "Invalid Argument glcn=%d, %s"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "CBC routines are called with Invalid arguments"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: No Required InfoDDTS "signaling"
CC-4-CC_ACT_LEAF_QUE
SEVERITY: ErrorFORMAT: "CC Func:%s ERR:%s IfId:%d Vpi:%d Vci:%d Routing Pri:%d Bw Group:%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in Priority Routing This can happen if enqueue/dequeue to/from active SVC release priority queue fails"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIs:a) General: dspver, depcds, dsplog, dsperr, dspmempartb) Interface: dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection: dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion: dsppnportcc, dspsvcparm,e) Topology: dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_SVC_QUEUING_
SEVERITY: ErrorFORMAT: "CC Func:%s ERR:%s LogItf:%p Vpi:%d Vci:%d Routing Pri:%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in Priority Routing This can happen if enqueue/dequeue to/from in-progress SVC release priority queue fails"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIs:a) General: dspver, depcds, dsplog, dsperr, dspmempartb) Interface: dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection: dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion: dsppnportcc, dspsvcparm,e) Topology: dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.SIGA-4-SIGAPI_ERROR
SEVERITY: ErrorFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Signalling error, Please See the format string of this event for detailed explanation"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.SIGA-5-SIGAPI_WARNING
SEVERITY: WarningFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Signalling warning, Please See the format string of this event for detailed explanation.RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.SIGA-5-SIGAPI_CRITICAL
SEVERITY: WarningFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Signalling critical warning, Please See the format string of this event for detailed explanation.RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.SIGA-7-SIGAPI_INFO
SEVERITY: InformationFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Generic SIGAPI Info, Please See the format string of this event for detailed explanation.RECOMMENDED ACTION: "NO RECOMMENDED ACTION"REQUIRED INFO: "NO REQUIRED INFO"SIGA-6-SIGAPI_NOTICE
SEVERITY: NoticeFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Generic SIGAPI Notice, Please See the format string of this event for detailed explanation.RECOMMENDED ACTION: "NO RECOMMENDED ACTION"REQUIRED INFO: "NO REQUIRED INFO"SIGA-4-SIGAPI_NULL_PTR
SEVERITY: ErrorFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Software Error -- Unexpected Null pointer Found"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.PT-7-PT_INFORMATIVE
SEVERITY: InformationFORMAT: "%s"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Informative event for path trace"RECOMMENDED ACTION: "NO RECOMMENDED ACTION"REQUIRED INFO: "NO REQUIRED INFO"CC-4-CC_MALLOC_ERROR
SEVERITY: ErrorFORMAT: "CC/%s, NoMemory,Ptr%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Cann't allocate memory for call control, furture signalling msg might be dropped"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_IPC_ERROR
SEVERITY: ErrorFORMAT: "CC/%s, IPCErr,MsgType%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Failed to send call control msg by IPC, Please Look for IPC Event Log For Explanation"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_TIMER_START_
SEVERITY: ErrorFORMAT: "CC/%s,StartTmrErr,Tmr%s Del%d Loc%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Couldn't start timer"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_TIMER_STOP_E
SEVERITY: ErrorFORMAT: "CC/%s, StopTmrErr,Tmr%s Loc%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Couldn't stop timer"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_MEMINIT_ERRO
SEVERITY: ErrorFORMAT: "CC/%s;Err%s heap%s\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Memory initialization error for signalling"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_MEMALLOC_ERR
SEVERITY: ErrorFORMAT: "CC/%s;Err%s blkType%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Couldn't allocate memory for signalling"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_MEMASSIGN_ER
SEVERITY: ErrorFORMAT: "CC/%s;MemName%s MemPtr0x%x\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Couldn't assign memory for signalling"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_ALLREL_ERROR
SEVERITY: ErrorFORMAT: "CC/%s;Err%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "No Active Call Stats"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-7-ATMSIG_BSE_LOG
SEVERITY: InformationFORMAT: "%s\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Informative String Logged"RECOMMENDED ACTION: "NO RECOMMENDED ACTION"REQUIRED INFO: "NO REQUIRED INFO"CC-4-CC_SCALING_ERRO
SEVERITY: ErrorFORMAT: "CC/%s;Err%s\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Signalling Scaling Error Occured, couldn't scale/descale call info correctly"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_SCALING_ERRL
SEVERITY: ErrorFORMAT: "CC/%s;ERR%s,ifid%d, vpi%d, vci%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Signalling Scaling Error Occured, couldn't scale/descale call info correctly"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-7-CC_SCALING_INFO
SEVERITY: InformationFORMAT: "CC/%s;INFO%s,ifid %x vpi %x vci %x\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Informative event log"RECOMMENDED ACTION: "NO RECOMMENDED ACTION"REQUIRED INFO: "NO REQUIRED INFO"CC-4-CC_NULL_PTR
SEVERITY: ErrorFORMAT: "CC/%s;Err%s\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Software Error -- Unexpected Null pointer Found"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-7-CC_DEL_TH_LOG
SEVERITY: InformationFORMAT: "%s\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Informative event log"RECOMMENDED ACTION: "NO RECOMMENDED ACTION"REQUIRED INFO: "NO REQUIRED INFO"CC-4-CC_TRF_REF_COUN
SEVERITY: ErrorFORMAT: "CC Func%s;Loc%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "TRF reference count error occured"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-7-CRANKBACK_LOG
SEVERITY: InformationFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Informative event log"RECOMMENDED ACTION: "NO RECOMMENDED ACTION"REQUIRED INFO: "NO REQUIRED INFO"CC-7-STATIC_LOOP_LOG
SEVERITY: InformationFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Informative event log"RECOMMENDED ACTION: "NO RECOMMENDED ACTION"REQUIRED INFO: "NO REQUIRED INFO"CC-4-CC_SVC_AUDIT
SEVERITY: ErrorFORMAT: "CC/Audit expired svc port=%x, callref=%x, state=%d \n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error Detected by SVC Audit"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_INV_RET_TYPE
SEVERITY: ErrorFORMAT: "CC Func%s;ErrFunc%s\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Audit StatEnq return invalid Status"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_NULL_PTR_ERR
SEVERITY: ErrorFORMAT: "CC Func%s;Ptr%s;Loc%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Software Error -- Unexpected Null pointer Found"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_EXCEEDS_MAX_
SEVERITY: ErrorFORMAT: "CC Func%s;Loc%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Max number of interface reached"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_AUDIT_TRIGGE
SEVERITY: ErrorFORMAT: "CC Func%s\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Audit trigger too soon"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_COUNTER_ALRE
SEVERITY: ErrorFORMAT: "CC Func%s; Counter%s;Loc%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Counter is zero already"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_INVALID_VALU
SEVERITY: ErrorFORMAT: "CC Func%s; Var%s;Val%x;Loc%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Software error -- Invalid variable value get assigned"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_AUD_REL
SEVERITY: ErrorFORMAT: "CC Func:%s; logItf:%ld;callRef:%ld,endptRef:%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Audit to release the call"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIs:a) General: dspver, depcds, dsplog, dsperr, dspmempartb) Interface: dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection: dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion: dsppnportcc, dspsvcparm,e) Topology: dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-7-CC_AUD_IN_PROG
SEVERITY: InformationFORMAT: "CC Func%s; Loc%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Call Audit in progress"RECOMMENDED ACTION: "NO RECOMMENDED ACTION"REQUIRED INFO: "NO REQUIRED INFO"CC-7-CC_SWO_CONGESTI
SEVERITY: InformationFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Informative event log"RECOMMENDED ACTION: "NO RECOMMENDED ACTION"REQUIRED INFO: "NO REQUIRED INFO"CC-4-CC_AUD_SPVC_MAS
SEVERITY: ErrorFORMAT: "CC Func%s, IfId%d, Vpi%d, Vci%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Audit release master SPVC"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_AUD_SPVC_SLA
SEVERITY: ErrorFORMAT: "CC Func%s, IfId%d, Vpi%d, Vci%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Audit release slave SPVC"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_STBL_BLKD_IN
SEVERITY: ErrorFORMAT: "%d, %d, %ld, %d %d %ld %s %d\n"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "active root/leaf can not be inserted to vp-vc tree or call ref tree"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_STBL_BLKD_PA
SEVERITY: ErrorFORMAT: "%ld %d %d %ld %d\n"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "active root/leaf can not be inserted to vp-vc tree or call ref tree"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_STBL_BLKING_
SEVERITY: ErrorFORMAT: "%ld %d %d %ld %d\n"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "May not be able to insert active root/leaf into vp-vc tree or call ref tree"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_STBL_BLKING_
SEVERITY: ErrorFORMAT: "%ld %d %d %ld %d\n"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "May not be able to insert active root/leaf into vp-vc tree or call ref tree"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_BLKD_SVC_INF
SEVERITY: ErrorFORMAT: "%d %d %ld %d %d %ld %d %d %d %d %d %s %d\n"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "SVC can not be inserted to vp-vc tree or call ref tree"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_BLKD_SVC_PAR
SEVERITY: ErrorFORMAT: "%ld %d %d %ld %d %d %d %d %d %d"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "SVC can not be inserted to vp-vc tree or call ref tree"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_BLKING_SVC_I
SEVERITY: ErrorFORMAT: "%ld %d %d %ld %d %d %d %d %d %d %d\n"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "May not be able to insert SVC into vp-vc tree or call ref tree"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_BLKING_SVC_P
SEVERITY: ErrorFORMAT: "%ld %d %d %ld %d %d %d %d %d %d %d\n"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "May not be able to insert SVC into vp-vc tree or call ref tree"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_VPCI_OUTOF_R
SEVERITY: ErrorFORMAT: "CC Func%s,IfId%d,Vpi%d,Vci%d,minVpi%d,minVci%d,maxVpi%d,maxVci%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "VPI/VCI out of range"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_PAKSIZE_ERR
SEVERITY: ErrorFORMAT: "CC/%s,pakSizeTooSmall,size%d minSize%d pak0x%x\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Not enough buffer available for atmsig request"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.CC-4-CC_PRI_QUEUE_ER
SEVERITY: ErrorFORMAT: "CC Func%s Loc%d Err%s\n"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Error in Priority Routing Utilty Function This can happen if an invalid condition is encountered during queue handling"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Please collect the output of CLIsa) General dspver, depcds, dsplog, dsperr, dspmempartb) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,d) Congestion dsppnportcc, dspsvcparm,e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.DDTS "pnnisys"
NETB-3-SSIF_TIMER_INIT
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in initializing internal data structure"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-SSIF_TIMER_ENAB
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in initializing internal data structure"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-PROOT_EP_INIT_F
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in initializing IPC data structure"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-CC_INIT_FAILED
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in initializing internal data structure"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-CLI_INIT_FAILED
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in initializing internal data structure"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-4-SPVCPFX_DEFINIT
SEVERITY: ErrorFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in initializing internal data structure"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-VCM_INIT_FAILED
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in initializing internal data structure"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-VSIMW_INIT_FAIL
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in initializing internal data structure"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-EP_INIT_FAILED
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in initializing IPC data structure"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-RESYNC_INIT_FAI
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in initializing internal data structure"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-soCCBstFail
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error while processing card state transition"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-6-soCCBstSucc
SEVERITY: NoticeFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Useful debugging information"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoNETB-3-IPC_MSG_ALLOC_F
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in IPC message allocation"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-IPC_MSG_SEND_FA
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in sending IPC message"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-VSIMW_INIT2ACT_
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error while processing card state transition"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-VSIMW_INIT2STDB
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error while processing card state transition"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-VSIMW_STDBY2ACT
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error while processing card state transition"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-4-UNEXPECTED_PROO
SEVERITY: ErrorFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Received invalid event in current state"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-RESYNC_STDBY2AC
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error while processing card state transition"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-3-RESYNC_INIT2STD
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error while processing card state transition"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.NETB-4-CCB_EP_HANDLER_
SEVERITY: ErrorFORMAT: "[PnCCB]ssiIpcComEpWait errno %d \n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in processing IPC message"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.DDTS "ccm"
CCM-4-CCM_MEM_CONG_IN
SEVERITY: ErrorFORMAT: "CCM Func:%s; Var:%s;Val1:%d;Val2:%d\n"FLAG: Stack TraceTHROTTLING: No ThrottlingEXPLANATION: "Invalid value received in API"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.CCM-4-CCM_LOGIC_ERROR
SEVERITY: ErrorFORMAT: "CCM/%s, %s error, type=%d, intf=%d, st=%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "The interface type passed in the API is invalid"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.CCM-4-CCM_VSI_ERROR
SEVERITY: ErrorFORMAT: "CCM/%s, %s error, type=%d, numIntf=%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Invalid event received in the module API"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.CCM-7-CCM_IFM_UPDT_IN
SEVERITY: InformationFORMAT: "CCM/%s, %s info, cmd=%d, logid=%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Useful debugging information"RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCCM-4-CCM_IFM_UPDT_ER
SEVERITY: ErrorFORMAT: "CCM/%s, %s error, cmd=%d, logid=%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Invalid update information received by this module"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.CCM-4-CCM_INTF_ERROR
SEVERITY: ErrorFORMAT: "CCM/%s, error in %s\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Invalid interface event received by this module"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.CCM-4-CCM_IPC_ERROR
SEVERITY: ErrorFORMAT: "CCM/%s, ipc error in %s, errno %d \n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "General IPC message error for this module"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.CCM-4-CCM_MALLOC_ERRO
SEVERITY: ErrorFORMAT: "CCM/%s, memory alloc error in %s \n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Memory allocation error"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.CCM-4-CCM_INVALID_VAL
SEVERITY: ErrorFORMAT: "CCM Func%s; Var%s;Val%x;Loc%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Invalid value received in API"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.CCM-4-CCM_NULL_PTR
SEVERITY: ErrorFORMAT: "CCM/%s;Err%s\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Invalid address error"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.CCM-4-CCM_PROV_TREE_C
SEVERITY: ErrorFORMAT: "LogIntfId %ld;Loc%d\n"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "SVCs present on interface in invalid state"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.DDTS "control-point/pxm-connmgm"
CFG_-5-SEMTAKE
SEVERITY: WarningFORMAT: "ssiSemTake failed for %s with errno %x"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CFG_FTP API failed to get semaphore, hence cannot access file descriptor table"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCFG_-4-SEMGIVE
SEVERITY: ErrorFORMAT: "ssiSemGive failed for with errno %x"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CFG_FTP API failed to give semaphore, hence no FTP access to configuration files on legacy SM's."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Capture the followings1) dsplog -mod CFG_FTP2) dsplog3) dspversionCFG_-5-UNINIT_SEM
SEVERITY: WarningFORMAT: "Uninitialized semaphore"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "The semaphore protecting the file descriptor table hasn't been created. No access until it is."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCFG_-4-SEMCREATE
SEVERITY: ErrorFORMAT: "ssiSemCreate failed for %s with errno %x"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "FAS API failed to create fasLfdSem semaphone, hence Remote file server will be frozen"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Capture the followings1) dsplog -mod CFG_FTP2) dsplog3) dspversionCFG_-5-BADCARD
SEVERITY: WarningFORMAT: "Request refused because the card in slot %d is of type %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "The request specified a slot that doesn't contain an appropriate card type."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCFG_-5-BADFORMAT
SEVERITY: WarningFORMAT: "Invalid file name format %s"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "File name format must be SM_<shelf>_<slot>.CF"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCFG_-5-NOTACTIVE
SEVERITY: WarningFORMAT: "Open request rejected because current state is not ACTIVE"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Only the active PXM may process FTP pseudo-driver requests"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCFG_-4-DRVINIT
SEVERITY: ErrorFORMAT: "iosDrvInstall() failed errno %x, while initing CFG FTP Driver"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "iosDrvInstall() failed while initing CFG FTP Driver; No FTP access to configuration files on legacy SM's."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Capture the followings1) dsplog -mod CFG_FTP2) dsplog3) dspversionCFG_-5-REINIT
SEVERITY: WarningFORMAT: "The cfg upload pseudo-driver has already been initialized."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "The cfg upload pseudo-driver may be initialized only once."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCFG_-4-DEVADD
SEVERITY: ErrorFORMAT: "Device registration failed with errno %x, for logical partition '%s'"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Device registration failed for a logical partition. No FTP access to configuration files on legacy SM's."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Capture the followings1) dsplog -mod CFG_FTP2) dsplog3) dspversionCFG_-5-WRITEOP
SEVERITY: WarningFORMAT: "Write op is not supported by the CFG FTP driver"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Write op is not supported by the CFG FTP driver"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCFG_-5-DELETEOP
SEVERITY: WarningFORMAT: "Delete op is not supported by the CFG FTP driver"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Delete op is not supported by the CFG FTP driver"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCFG_-5-CREATEOP
SEVERITY: WarningFORMAT: "Create op is not supported by the CFG FTP driver"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Create op is not supported by the CFG FTP driver"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCFG_-5-BADIOCTL
SEVERITY: WarningFORMAT: "The CFG FTP driver doesn't support IOCTL function %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "The IOCTL function only supports FIOSTATGET"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCFG_-5-NOHANDLES
SEVERITY: WarningFORMAT: "No file descriptor were available."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "No file descriptors were available."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCFG_-5-BAD_HANDLE
SEVERITY: WarningFORMAT: "An invalid file table index was passed %d"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Operation failed out-of-range or invalid file handle"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoDDTS "unknown"
CHS-4-CHS_INIT_ERR
SEVERITY: ErrorFORMAT: "CHS Task Init Failed"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Channel initialization failed."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: No Required InfoDDTS "CLI"
CLI-4-CLI_ERR_RET
SEVERITY: ErrorFORMAT: "%s(): failed errno=%d"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "A call to the above function failed. The reason for the failure is in errno."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: "Please capture information related to this error from dsperr and dsplog commands."CLI-7-INVDTASK
SEVERITY: InformationFORMAT: "%s: stray SSI_TID 0x%x (%s) has been deleted"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "The task with given task id has been deleted."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-4-CLRCFG_CMD_ERR
SEVERITY: ErrorFORMAT: "%s"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "clrcnf/clrallcnf command on the PXM didnot go thru."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Capture the output of the CLI commands, dsperr, dsplog and collect the coredump file if a coredump occurred.CLI-4-CLRCFG_NO_STBY
SEVERITY: ErrorFORMAT: "%s"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "clrallcnf/clrcnf command is executed when standby PXM is not present. If the standby PXM is physically not inserted then there are no consequences, otherwise make sure that the standby PXM remains/comes-up as standby. If you ohserve that the standby PXM came up Active even after clrallcnf/clrcnf then perfrom clrallcnf/clrcnf again. If this is not done it could lead to residual databases."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Capture the output of the CLI commands, dsperr, dsplog and collect the coredump file if a coredump occurred.CLI-5-WRITE_FAILED
SEVERITY: WarningFORMAT: "%d: errno 0x%x, session 0x%x, epid %s %s."FLAG: No FlagTHROTTLING: One MinuteEXPLANATION: "CLI intercard write failed due to communication end-point resolve failure."RECOMMENDED ACTION: No action requiredREQUIRED INFO: "Capture information related to this error from dsperr and dsplog commands."CLI-2-ATTN_SEVERE_CMD
SEVERITY: Major AlertFORMAT: "User %s@%s attempting to execute %c%1.80s%c."FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "A user is attempting to execute a command which could potentially be service impacting. The event is logged before the command is actually executed since the execution of the command could reset the node."RECOMMENDED ACTION: "This event is an indication that a command that could change the system configuration in some way is being executed by a user. If the command was executed intentionally for a known reason then this event can be disregarded. If however, the command was executed accidentally or without permission then please contact TAC ."REQUIRED INFO: " Execute the dsplog, dsperr, dsprev commands to gather the basic information. Depending on the severe command executed additional information may need to be collected. Please contact TAC for further details"CLI-7-CMDLOG
SEVERITY: InformationFORMAT: "cliCmdLog %s@%s %c%1.80s%c."FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "The above command was entered by the user ."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-4-CLISMTERMD
SEVERITY: ErrorFORMAT: "cliSmtermd %s() failed"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "A call to the above function failed. The reason for the failure is listed"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: "Please capture information related to this error from dsperr and dsplog commands."CLI-7-CLITNLOG
SEVERITY: InformationFORMAT: "cliTelnetd client@%s %s"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "A telnet session was attempted by the user."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-7-TELNETD
SEVERITY: InformationFORMAT: "socket %d, l_onoff %d, l_linger %d, linger addr 0x%x, %d.%d.%d.%d"FLAG: Write to BramTHROTTLING: No ThrottlingEXPLANATION: "A telnet session was attempted by the user."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-4-TELNET_LOGIN_AT
SEVERITY: ErrorFORMAT: "%s User %s@ %d.%d.%d.%d attempted to login thrice with incorrect password "FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Specified user tried to login thrice unsuccessfully"RECOMMENDED ACTION: No action requiredREQUIRED INFO: "The event will mention the ip-address that the user tried to login at. That may help to locate the source of the problem. The event will also indicate the exact time when this occured"CLI-4-LOGIN_ATTEMPT
SEVERITY: ErrorFORMAT: "%s User %s@%s attempted to login thrice with incorrect password "FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Specified user tried to login thrice unsuccessfully"RECOMMENDED ACTION: No action requiredREQUIRED INFO: "The user tried to login unsuccessfully using the console. The event will indicate the exact time when this occured"CLI-5-AUTHENTICATION
SEVERITY: WarningFORMAT: "%s@%s %s"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Could not send Login/Logout SNMP trap for CLI session."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-5-TASKDELETEFAIL
SEVERITY: WarningFORMAT: "%s: ssiTaskDelete(%s: 0x%X): failed for %d trials in %d seconds with errno=%d"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "The task with given task id couldn't be deleted."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-5-GENERALWARNING
SEVERITY: WarningFORMAT: "%s %s %s %s"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Problems caused by routine calls that need attention."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-5-IPCCHANFAIL
SEVERITY: WarningFORMAT: "ssiIpcMessageSendSync failed, with rc=%d, and cmdType returned =%d"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "The IPCmsgs got muddled up with someother cli msg."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-5-IPC_MEM_ALLOC_F
SEVERITY: WarningFORMAT: "ssiMalloc failed, for cmdType = %d"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "System Could not allocate memory."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-5-EPIDINSTATEFAIL
SEVERITY: WarningFORMAT: "Unable to get end point. hmmEpid = %d"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Port id could not be obtained for specified phy slot."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-7-INFORMATION
SEVERITY: InformationFORMAT: "%s %s"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Information about the tasks carried out by CLI"RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-4-CLI_DB_OP_FAILE
SEVERITY: ErrorFORMAT: "Db operation failed with errno = %d"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Database operations in the cli context failed."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: "Please capture information related to this error from dsperr and dsplog commands."CLI-4-GENERALERROR
SEVERITY: ErrorFORMAT: "%s %s %s 0x%x"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Problem caused by certain conditions that need attention. Here are some potential problems Errors related to semaphore, Errors related to parameter validation, etc"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: "Please capture information related to this error from dsperr and dsplog commands."CLI-5-NOPROV
SEVERITY: WarningFORMAT: "Failed change state to NO PROV taskName%s taskIDPtr%p cmd%s tick%lu"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Problems caused by routine calls that need attention."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-5-NULLMSGDATAPTR
SEVERITY: WarningFORMAT: "NULL message data pointer returned from HMM"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Failed to get crossbar error information from the HMM task."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-5-HMMCMDFAILED
SEVERITY: WarningFORMAT: "HMM returned error code (%d) from request for crossbar error information"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Failed to get crossbar error information from the HMM task."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-5-HMMINVALIDDATA
SEVERITY: WarningFORMAT: "HMM returned invalid message data %d"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "The HMM task provided invalid crossbar error information."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-3-CLICNF
SEVERITY: Minor AlertFORMAT: "%d %s"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "A call to the above function failed. The reason for the failure is listedRECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: "Please capture information related to this error from dsperr and dsplog commands."CLI-7-BURNBOOT_SIGFIL
SEVERITY: InformationFORMAT: "Burnboot signature file contents [%s]."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Signature file was created with following contents."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoCLI-5-BURNBOOT_SIGFIL
SEVERITY: WarningFORMAT: "Burnboot signature file creation failed. %s."FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "Burnboot signature file creation failed. This message identifies what exactly went wrong."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoDDTS "clocking"
CLK_-2-LOA_ON_UI
SEVERITY: Major AlertFORMAT: "No signal detected on local oscillator : Detected by module = %s "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "There is no signalling activity on the local oscillatior The crystal on the UI-S3 back card is not present or not good."RECOMMENDED ACTION: Follow the below steps:1. On PXM: Do a dspcd to verify that the Back cardis valid for the specific front card. Else rectify this.2. Do a dspclockinfo in the shellConn and verify that the IOBUffers are enabled.3. Call TAC supportREQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-7-IO_ERR_CLEAR
SEVERITY: InformationFORMAT: "%s: IO Buffers were found in alarm but it was cleared "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "HMM detected IO Buffer in error but enabling buffers cleared the alarm"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-7-FUNC_TRACE
SEVERITY: InformationFORMAT: "CLK FUNC TRACE Stepped into function %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: " This event is to trace the logic flow"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-7-TRAP_SEND
SEVERITY: InformationFORMAT: "%s Clock status Trap Send Status %s "FLAG: No FlagTHROTTLING: One TickEXPLANATION: " This event is to trace the logic flow"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-7-ALM_CLR
SEVERITY: InformationFORMAT: "CLEARED %s "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Alarm was cleared"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: No Required InfoCLK_-7-ALM_SET
SEVERITY: InformationFORMAT: " %s "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Alarm was raised"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: No Required InfoCLK_-7-INVALID_CTC_EVE
SEVERITY: InformationFORMAT: "CLK INFO Invalid CTC Event %d "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "The Clock Task received unknown CTC Event"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-7-CTC_API_FAILED
SEVERITY: InformationFORMAT: "CLK INFO %s "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "The Clock Task Called a CTC API that failed"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-7-CTC_EVENT_INFO
SEVERITY: InformationFORMAT: "CLK CTC EVENT HNDLR Ctc event %s Received"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CTC EVENT HANDLER, TRACE"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-2-CLK_IPC_FAIL
SEVERITY: Major AlertFORMAT: "CLK IPC CHANNEL FAILURE Detected by module = %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "IPC Channed Failed, Clock Functionality may be affected"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-4-IPC_CHAN_FAILUR
SEVERITY: ErrorFORMAT: "The SSI_RCVID is null, rcvIdPtr=0x%x"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "IPC mechanism did not pass the receivers id."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-2-IPC_HANDLER_FAI
SEVERITY: Major AlertFORMAT: "CLK IPC CHANNEL FAILURE Detected by module = %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Manager IPC Handler can not be attached, NwClkMgr task deleted"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-3-IPC_MSG_NULL
SEVERITY: Minor AlertFORMAT: "CLK module = %s, IPC Message is Null"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "IPC Channel Failed , Clock Functionality may be affected"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-4-UNKNOWN_PRIORIT
SEVERITY: ErrorFORMAT: "UNKNOWN CLOCK PRIORITY Detected by module = %s , priority = %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CLK SOURCE PRIORITY UNKNOWN, CONFIGURATION REQUEST FAILED"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-4-UNKNOWN_TYPE
SEVERITY: ErrorFORMAT: "UNKNOWN CLK TYPE Detected by module = %s , Type = %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CLK SOURCE TYPE UNKNOWN, CONFIGURATION REQUEST FAILED"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-2-UIBC_INCORRECT
SEVERITY: Major AlertFORMAT: "WRONG CLOCK BACKCARD Type = %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CLK UI BACK CARD NOT UIS3, CLOCK NOT CONFIGURED"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-2-BC_NOT_VALID
SEVERITY: Major AlertFORMAT: "CLK BC NOT VALID/NOT INSERTED Detected by module = %s "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Either the UI_S3 Back card is not present or it is not a UI-S3 back card or the Back card NovRam might not be programmed or the IO buffers are disabled"RECOMMENDED ACTION: Follow the below steps1. On PXM Do a dspcd to verify that the Back cardis valid for the specific front card. Else rectify this.2. Do a dspclockinfo in the shellConn and verify that the IOBUffers are enabled.3. Call TAC supportREQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-2-EPID_RESOLVE_FA
SEVERITY: Major AlertFORMAT: "CLK TASK STBY EPID INVALID"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "ACTIVE CLK TASK CAN NOT RESOLVE STBY EPID, CLOCK UPDATES NOT SEND"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-2-EPID_CREATE_FAI
SEVERITY: Major AlertFORMAT: "CLK TASK EPID CREATION FAILED Detected by module = %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Manager Epid can not be created. NwClkMgr Task deleted"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-7-VSISLAVE_EPID_R
SEVERITY: InformationFORMAT: "Epid Resolve failed; display updates will be retried Detected by module = %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "ACTIVE CLK TASK CAN NOT RESOLVE VSISLAVE EPID, TRAPS NOT SENT"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-3-IPC_MSG_DATA_NU
SEVERITY: Minor AlertFORMAT: "CLK IPC MSG DATA NULL Detected by module = %s "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Incoming IPC Message is Null, Clock Functionality may be affected"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-3-TASK_STATE
SEVERITY: Minor AlertFORMAT: "CLK TASK STATE NOT CORRECT FOR MESSAGE RECEIVED Detected by module = %s "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Manager Task is in Incorrect State For received Message"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-3-MSG_NULL
SEVERITY: Minor AlertFORMAT: "CLOCK MESSAGE IS NULL Detected by module = %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CLOCK CONFIGURATION MESSAGE IS NULL"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-3-CLKSOURCES_INCO
SEVERITY: Minor AlertFORMAT: "NUMBER OF CLOCK SOURCES IN MESSAGE IS INCORRECT Detected by module = %s , numberOfClockSources = %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CLOCK CONFIGURATION MESSAGE HAS INCORRECT NO OF CLK SOURCES"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-3-MALLOC_FAIL
SEVERITY: Minor AlertFORMAT: "CLK TASK module = %s, failed to allocate memory"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CLK TASK Malloc Fail , Clock Functionality may be affected"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-2-DBINDX_FAIL
SEVERITY: Major AlertFORMAT: "CLK TASK module = %s, Indexing into DB failed for indx=%d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Invalid Error Index "RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-7-SLOT_MISMATCH
SEVERITY: InformationFORMAT: "CLK TASK Incorrect Slot Number %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Mismatch in slot numbers during CTC events."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-2-TIMER_CREATE_FA
SEVERITY: Major AlertFORMAT: "CLK TASK TIMER CREATE FAILEDin func %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Manager Timer Can not be Created. NwClkMgr Task deleted"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-2-TIMER_SCHEDULE_
SEVERITY: Major AlertFORMAT: "Attempt to schedule %s timer failed. Reason %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Manager Timer could not be scheduled."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-2-TIMER_CANCEL_FA
SEVERITY: Major AlertFORMAT: "Attempt to cancel %s timer failed. Reason %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Manager Timer could not be cancelled."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-7-GEN_INFO
SEVERITY: InformationFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "An event worth attention occured."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-4-GEN_ERRORSEVERITY: ErrorFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "A General error was encountered in clocking module."RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-7-QUALIFY_CLOCK
SEVERITY: InformationFORMAT: "System is trying to determine if %s clock is lockable."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clocking hardware is qualifying specified priority."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-7-SWITCH_CLOCK
SEVERITY: InformationFORMAT: "System is trying to switch to %s clock."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clocking hardware is being locked to specified priority."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-7-SWITCH_CLOCK_DO
SEVERITY: InformationFORMAT: "System has locked to %s clock."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clocking hardware has locked to specified priority."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-7-QUALIFY_CLOCK_D
SEVERITY: InformationFORMAT: "%s clock is lockable."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clocking hardware has qualilfied specified priority clock as lockable."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-7-CLOCK_LOA
SEVERITY: InformationFORMAT: "Loss of Activity detected for %s Clock source "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clocking hardware has detected loss of activity for the specified priority. "RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-7-CLOCK_LOA_CLEAR
SEVERITY: InformationFORMAT: "Signal Activity detected for %s Clock source "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clocking hardware has detected Signal activity for the specified priority."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-7-CLOCK_UNLOCKABL
SEVERITY: InformationFORMAT: "%s Clock source is unlockable."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock source of the specified priority is unlockable "RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-7-PHASE_ERROR
SEVERITY: InformationFORMAT: "Clock is getting phase errors priority %d, count %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clocking hardware is getting phase errors from specified priority."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCLK_-4-LOCK_TO_NULL_AT
SEVERITY: ErrorFORMAT: "Attempting to lock %s clk when it is non-existent"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Hardware is trying to latch to a non-existent clk source"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-4-PROCESS_STBYUPD
SEVERITY: ErrorFORMAT: "CLK TASK PROCESS STBYUPDT FAILED Detected by module = %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Source Information could not be updated on Standby Control Card"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-4-PROCESS_UIREQS_
SEVERITY: ErrorFORMAT: "CLK TASK PROCESS UI REQS FAILED Detected by module = %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Source Information could not be displayed"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-4-PROCESS_SHM_MSG
SEVERITY: ErrorFORMAT: "UI Back card messages from shm to Clock Manager Failed Detected by module = %s, Line = %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Back card insertion or removal message could not be delivered to the Clock Manager"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-2-STBY_INSERTED_M
SEVERITY: Major AlertFORMAT: "Insertion Message from Standby Clock Task to the Active Clock task were not processed correctly Detected by module = %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock redundancy may be affected"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-4-STBY_EVENT_MSG_
SEVERITY: ErrorFORMAT: "Messages about events affecting clock on the standby card were not processed correctly Detected by module = %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock redundancy may be affected"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-4-SET_FAILED
SEVERITY: ErrorFORMAT: "Clock Set (Configure) request Failed in %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock configure request failed in the specified function"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-4-DELETE_FAILED
SEVERITY: ErrorFORMAT: "Clock Delete request Failed in %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Delete request failed in the specified function"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.CLK_-7-CLK_SOURCE_DELE
SEVERITY: InformationFORMAT: "%s Clock Source deleted due to user request"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Clock Source deleted due to user request."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoDDTS "ccma"
CCMA-4-NOIPCBUF
SEVERITY: ErrorFORMAT: "%s, line %d Failed to allocate Ipc Buffer when %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal software error."RECOMMENDED ACTION: "Please collect the following info and contact TAC."REQUIRED INFO: "- On PXM451. dspver2. dspdate3. dsplog -sl <slot that experienced this err>4. dspcd <slot that experienced err>5. dsperr <slot that experienced err>CCMA-4-IPCSENDFAIL
SEVERITY: ErrorFORMAT: "%s, line %d Ipc send fail in %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal software error."RECOMMENDED ACTION: "Please collect the following info and contact TAC."REQUIRED INFO: "- On PXM451. dspver2. dspdate3. dsplog -sl <slot that experienced this err>4. dspcd <slot that experienced err>5. dsperr <slot that experienced err>CCMA-4-CREATEEPFAIL
SEVERITY: ErrorFORMAT: "%s, line %d Failed to create communication endpoint for %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal software error - create communication endpoint failed."RECOMMENDED ACTION: "Please collect the following info and contact TAC."REQUIRED INFO: "- On PXM451. dspver2. dspdate3. dsplog -sl <slot that experienced this err>4. dspcd <slot that experienced err>5. dsperr <slot that experienced err>CCMA-4-ATTACHEPFAIL
SEVERITY: ErrorFORMAT: "%s, line %d Failed to attach message handler to communication endpoint for %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal software error - failed to attach message handler to communication endpoint."RECOMMENDED ACTION: "Please collect the following info and contact TAC."REQUIRED INFO: "- On PXM451. dspver2. dspdate3. dsplog -sl <slot that experienced this err>4. dspcd <slot that experienced err>5. dsperr <slot that experienced err>CCMA-4-CREATETASKFAIL
SEVERITY: ErrorFORMAT: "%s, line %d Failed to Create %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Software error create task failed."RECOMMENDED ACTION: "Please collect the following info and contact TAC."REQUIRED INFO: "- On PXM451. dspver2. dspdate3. dsplog -sl <slot that experienced this err>4. dspcd <slot that experienced err>5. dsperr <slot that experienced err>CCMA-7-CTCEVENTMISMATC
SEVERITY: InformationFORMAT: "%s, line %d Ctc event & cm root task state mismatch ctc event - %x, state - %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "This event is never used. Please ignore."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoDDTS "control-point"
CNTP-7-MSGSUBS
SEVERITY: InformationFORMAT: "cntpMsgBufTake() ssiFrameBufferAlloc failed %d times."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Attempt to allocate a buffer using ssiFrameBufferAlloc from the control point subsystem failed the specified number of times."RECOMMENDED ACTION: No action requiredREQUIRED INFO: No Required InfoDDTS "drivers"
COME-4-COMET_ERR
SEVERITY: ErrorFORMAT: "COMET Err %s() line %d Event Code %X, Event Info %X"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "COMET software module generates event info code"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd (for PXM and for the slot the error is found), dspver, dsperr, ls C:/FW before calling the Cisco Techincal support representative.COME-4-COMET_ERR_STR
SEVERITY: ErrorFORMAT: "COMET Err %s() line %d Event Code %X, Info String %s"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "COMET software module generates event info string"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd (for PXM and for the slot the error is found), dspver, dsperr, ls C:/FW before calling the Cisco Techincal support representative.DDTS "spvc"
CONP-5-WARNING
SEVERITY: WarningFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: No ExplanationRECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCONP-7-INFO
SEVERITY: InformationFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: No ExplanationRECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCONP-7-DINFO
SEVERITY: InformationFORMAT: "DEBUG%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: No ExplanationRECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCONP-4-ERROR
SEVERITY: ErrorFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in Connection Provisioning and alarm handling. This is valid on BPX+SES product only."RECOMMENDED ACTION: Issue these comamnds on the shell prompta) dspverb) dsplogsc) dsperrsd) dsppnportse) dspconsf) dspconREQUIRED INFO: Collect output of these CLIsa) dspver b) dsplogs c) dspvers d) dsppnports e) dspconsf) dspcon for connection in problemCONP-5-WARNING
SEVERITY: WarningFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: No ExplanationRECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCONP-7-INFO
SEVERITY: InformationFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: No ExplanationRECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCONP-7-DINFO
SEVERITY: InformationFORMAT: "DEBUG%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: No ExplanationRECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCONP-4-ERROR
SEVERITY: ErrorFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in Connection Provisioning task state/role transition"RECOMMENDED ACTION: Issue these comamnds on the shell prompta) dspverb) dsplogsc) dsperrsd) dsppnportse) dspconsf) dspconREQUIRED INFO: Collect output of these CLIsa) dspver b) dsplogs c) dspvers d) dsppnports e) dspconsf) dspcon for connection in problemCONP-5-WARNING
SEVERITY: WarningFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: No ExplanationRECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCONP-7-INFO
SEVERITY: InformationFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: No ExplanationRECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCONP-7-DINFO
SEVERITY: InformationFORMAT: "DEBUG%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: No ExplanationRECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCONP-4-ERROR
SEVERITY: ErrorFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in Connection Provisioning and SPVC Module interface"RECOMMENDED ACTION: Issue these comamnds on the shell prompta) dspverb) dsplogsc) dsperrsd) dsppnportse) dspconsf) dspconREQUIRED INFO: Collect output of these CLIsa) dspver b) dsplogs c) dspvers d) dsppnports e) dspconsf) dspcon for connection in problemDDTS "spvc"
CONP-4-CPI_MSG_DANGLIN
SEVERITY: ErrorFORMAT: "%s Previous cpi msg has not been cleared"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Previous cpi msg should have been cleared"RECOMMENDED ACTION: Issue these comamnds on the shell prompta) dspverb) dsplogsc) dsperrsd) dsppnportse) dspconsf) dspconREQUIRED INFO: Collect output of these CLIsa) dspver b) dsplogs c) dspvers d) dsppnports e) dspconsf) dspcon for connection in problemCONP-4-NOT_SES
SEVERITY: ErrorFORMAT: "%s Should only work for SES"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "This command/code only used for SES"RECOMMENDED ACTION: Issue these comamnds on the shell prompta) dspverb) dsplogsc) dsperrsd) dsppnportse) dspconsf) dspconREQUIRED INFO: Collect output of these CLIsa) dspver b) dsplogs c) dspvers d) dsppnports e) dspconsf) dspcon for connection in problemDDTS "drivers"
ATMI-5-ATMIZER_SARERR
SEVERITY: WarningFORMAT: "ATMIZER_SAR Error %s() line %d %X,%X"FLAG: No FlagTHROTTLING: One TickEXPLANATION: No ExplanationRECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoDDTS "cpro"
CPRO-7-GEN_INFO
SEVERITY: InformationFORMAT: " %s; %d, errno=%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: " general cpro health related info"RECOMMENDED ACTION: "This is an Info"REQUIRED INFO: No Required InfoCPRO-4-TRANSACTION_ERR
SEVERITY: ErrorFORMAT: "connection Transaction err : %s; errno=%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "error happened when getting/incrementing transaction id."RECOMMENDED ACTION: "Please collect the following info and contact TAC"REQUIRED INFO: "From PXM45 :1) dspdate2) dsplog for this slot3) dspverFROM SM :1) dspcons2) from the axsm shell cProTransactionHelp "CPRO-7-DEL_REQ_NAK_BY_
SEVERITY: InformationFORMAT: "%s; conn = %d.%d.%d; err = %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "PNNI Controller NAKs the DELETE request"RECOMMENDED ACTION: "This is an info log"REQUIRED INFO: No Required InfoCPRO-7-VSIS_FIND_RECOR
SEVERITY: InformationFORMAT: "Could not find record(%d) for %d.%d.%d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "VSI-S NAKs the request as connection does not exist in the CPRO databased"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-7-CONNCAPEXCEED
SEVERITY: InformationFORMAT: "Connection capacity of card reached"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Software limit for the provisioned connection capacity has been reached. Cannot provision any more connections."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-5-NONEXISTCONN
SEVERITY: WarningFORMAT: "Connection %d.%d.%d does not exist"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Connection does not exist while an internal operation took place. This can happen under some circumstances. This event logs is reqd to keep track of those circumstances."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-4-PASSTHROREGFAIL
SEVERITY: ErrorFORMAT: "Could not register for passthrough"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "All provisioning requests for connections are bound to fail. Possible indication of VSI layer failure. Rootcause of failure can be many including internal memory leakages, IPC buffer leakages."RECOMMENDED ACTION: "Please collect the following information for further analysis and call TAC support; This may require a reboot or switchover of the SM. Before doing so, TAC may need to collect relevant information."REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-3-DOWNLOADFAILSEVERITY: Minor AlertFORMAT: "Error downloading from disk"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Could not download connection configuration from disk. The problem could span across several entities in AXSM/PXM. The problems could range from memory/IPC buffer leakages to runaway/suspended task on either card."RECOMMENDED ACTION: "There may not be a need for any corrective action as the card would be reset. However, please collect the following information for further analysis and call TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-7-SYNCRAMERR
SEVERITY: InformationFORMAT: "Sync Ram Error at line %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal Error. Could occur under normal circumstances. Typical scenario includes reset of standby AXSM while bulk/incremental sync is in progress"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-4-DBMINITFAIL
SEVERITY: ErrorFORMAT: "Error registering with DB manager"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "DB server did not accept registration from AXSM. The problem could span across several entities in AXSM/PXM. The problems could range from memory/IPC buffer leakages to runaway/suspended task on either card."RECOMMENDED ACTION: "There may not be a need for any corrective action as the card would be reset. However, please collect the following information for further analysis and call TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-4-CPROTIMERFAIL
SEVERITY: ErrorFORMAT: "Could not start cPro timer"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Internal error with card infrastructure. Will impact connection alarm integration and reporting activity."RECOMMENDED ACTION: "In all probability, the card would reset. Regardless of this, please collect the following information for further analysis and call TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-4-CPROMSGHDLRFAIL
SEVERITY: ErrorFORMAT: "Error attaching cPro msg handler; errno = %x"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Internal error with card infrastructure. The card would eventually reset."RECOMMENDED ACTION: "There may not be a need for any corrective action as the card would be reset. However, please collect the following information for further analysis and call TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-4-COMEPCREATEFAIL
SEVERITY: ErrorFORMAT: "Error creating EpId"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal error with card infrastructure. The card would eventually reset."RECOMMENDED ACTION: "There may not be a need for any corrective action as the card would be reset. However, please collect the following information for further analysis and call TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-4-INVALID_CNTRLR_
SEVERITY: ErrorFORMAT: "Error in retrieving controller information"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error in retrieving controller information from shelf management database. May affect all connection provisioning activity on the card."RECOMMENDED ACTION: "Please collect the following information for further analysis and call TAC support; This may require a reboot or switchover of the SM/PXM. Before doing so, TAC may need to collect relevant information."REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-4-SYNCRAMINITFAIL
SEVERITY: ErrorFORMAT: "line %d Ram Sync %s error - errno = 0x%x"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal error with card infrastructure. The card would eventually reset."RECOMMENDED ACTION: "There may not be a need for any corrective action as the card would be reset. However, please collect the following information for further analysis and call TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-4-ALRM_REG_FAIL
SEVERITY: ErrorFORMAT: "Error registering with Card alarm manager"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Error registering with Card alarm manager. Alarm reporting for conns is disabled."RECOMMENDED ACTION: "Please collect following information before contacting TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-3-MISMATCH_CONN
SEVERITY: Minor AlertFORMAT: "Mismatch on connection %d.%d.%d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Mismatch between SPVC manager and AXSM databases for this connection. This could happen because of PXM45/AXSM switchover while provisioning or possible database update failures at either end."RECOMMENDED ACTION: "Check if the connection is still in this condition, using the dspcons command on AXSM. If it is not, then this is a possible transient condition and can be ignored. If condition does exist, then attempt to rectify the problem with following stepsa) If this is a master endpoint, attempt toadmin down and up the connection.b) If this is a slave endpoint, then deleteand readd the whole connection. If either of them, does not help please collect the following info and inform TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-7-RINGCONGESTION
SEVERITY: InformationFORMAT: "Ring Congested; Wr%d Rd%d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Ring Congested."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-7-RINGCONGABATE
SEVERITY: InformationFORMAT: "Ring Congestion Abate; Wr%d Rd%d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Ring Congestion Abate."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-6-UNKNOWN_MSGTYPE
SEVERITY: NoticeFORMAT: "Unknown message type %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Unknown message type "RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-3-FLUSHFAIL
SEVERITY: Minor AlertFORMAT: "Error flushing semaphore; errno=%d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal error in card infrastructure. This may not result in a catastrophic failure, but it is probably indicative of a basic problem in the SSI."RECOMMENDED ACTION: "User may need to switchover to a redundant card, if there is one. However, before doing so, it is advisable to collect the following information and involve TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-3-AVLFAIL
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal error in AVL library functions. This may cause problems over a period of time."RECOMMENDED ACTION: "User may need to switchover to a redundant card, if there is one. However, before doing so, it is advisable to collect the following information and involve TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resetCPRO-3-CONNDB_ERR
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal connection database error. May result in problems over a period of time."RECOMMENDED ACTION: "User may need to switchover to a redundant card, if there is one. However, before doing so, it is advisable to collect the following information and involve TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) Coredump if the card had resety engineering."CPRO-7-CANNOT_FIND_REC
SEVERITY: InformationFORMAT: "Could not find record for %d.%d.%d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "None"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-7-CPROTASK
SEVERITY: InformationFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Invalid CTC transition prevented. Also to track CPRO TASK transitions(a normal event)"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-7-CHKSUM_MISMATCH
SEVERITY: InformationFORMAT: "Checksum mismatch in Record %d disk %d record %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Check mismatch between disk & RAM database detected during resync which occurs on a standby to active role transition. This is a normal event that was possibly caused by transient card events at the time when provisioning was done."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-5-NONEXISTOPSTATE
SEVERITY: WarningFORMAT: "EM OpState invalid for ifNum %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-5-EMGETOPSTATEFAI
SEVERITY: WarningFORMAT: "EM Get OpState fails for ifNum=%d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-5-NONEXISTADMSTAT
SEVERITY: WarningFORMAT: "EM AdmState invalid for ifNum %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-5-EMGETADMSTATEFA
SEVERITY: WarningFORMAT: "EM Get AdmState fails for ifNum %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-5-GETOPSTATEFAIL
SEVERITY: WarningFORMAT: "cPro Get OpState fails for ifNum %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-5-GETADMSTATEFAIL
SEVERITY: WarningFORMAT: "cPro Get AdmState fails for ifNum %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-4-ADDCHANLOOPFAIL
SEVERITY: ErrorFORMAT: "cPro Addchanloop fails. ifNum=%d, vpi=%d, vci=%d, dir=%d."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal error while attempting to add chan loopback. This will not impact the regular functioning of the card. However, this needs to be analysed by engineering."RECOMMENDED ACTION: "Please collect the following details and inform TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) dspconinfo on PXMh) dsppnports on PXMi) dsplns on AXSMh) dspports on AXSMh) dspspvcifs on AXSMh) dspcon on AXSMent logs and config data."CPRO-7-DELCHANLOOPFAIL
SEVERITY: InformationFORMAT: "cPro Delchanloop fails. ifNum=%d, vpi=%d, vci=%d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal error while attempting to add chan loopback. This will not impact the regular functioning of the card. However, this needs to be analysed by engineering."RECOMMENDED ACTION: "Please collect the following details and inform TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) dspconinfo on PXMh) dsppnports on PXMi) dsplns on AXSMh) dspports on AXSMh) dspspvcifs on AXSMh) dspcon on AXSMCPRO-4-NULLRSPPTR
SEVERITY: ErrorFORMAT: "Null response ptr is returned"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal IPC error in the card. This will not affect regular functioning of the card. However, this problem needs to be analysed by TAC/engineering "RECOMMENDED ACTION: "Please collect the following details and inform TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) dspconinfo on PXMh) dsppnports on PXMi) dsplns on AXSMh) dspports on AXSMh) dspspvcifs on AXSMh) dspcon on AXSMCPRO-4-IPCMSGALLOCFAIL
SEVERITY: ErrorFORMAT: "IPC Message Allocation failed"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal IPC error in the card. This will not affect regular functioning of the card. However, this problem needs to be analysed by TAC/engineering "RECOMMENDED ACTION: "Please collect the following details and inform TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) dspconinfo on PXMh) dsppnports on PXMi) dsplns on AXSMh) dspports on AXSMh) dspspvcifs on AXSMh) dspcon on AXSMCPRO-7-IPCMSGSENDSYNCF
SEVERITY: InformationFORMAT: "IPC Message SendSync failed"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Internal IPC error in the card. This will not affect regular functioning of the card. However, this problem needs to be analysed by TAC/engineering "RECOMMENDED ACTION: "Please collect the following details and inform TAC"REQUIRED INFO: a) dspcds on PXMb) dspred on PXMc) dspcd <slot> on PXMd) dspcd on the affected slote) dsprevs on PXMf) All event logs prior to event (dsplog)g) All error logs prior to event (dsperr)h) dspconinfo on PXMh) dsppnports on PXMi) dsplns on AXSMh) dspports on AXSMh) dspspvcifs on AXSMh) dspcon on AXSMCPRO-7-RECFOUNDNOTLPBK
SEVERITY: InformationFORMAT: "Connection not in loopback. ifNum=%d, vpi=%d, vci=%d, dir=%d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "User is attempting to delete loopback on a connection which is not in loopback."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-7-DALDSPCONNLOOPE
SEVERITY: InformationFORMAT: "dalDspConnLoop(ifNum=%d) return ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "dalDspConnLoop() return ERROR."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-7-DSPCHANLOOPFAIL
SEVERITY: InformationFORMAT: "cPro Dspchanloop fails. ifNum=%d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "cPro Dspchanloop fails."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCPRO-7-SNMP_ERROR
SEVERITY: InformationFORMAT: "SNMP error; id = %d; err %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "SNMP get/set operation fails."RECOMMENDED ACTION: "This error is also displayed on CWM. So, there is no need to take any action on switch side."REQUIRED INFO: No Required InfoCPRO-4-RAMDISK_ERR
SEVERITY: ErrorFORMAT: "RamDisk error %s; errno=%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Alarm file RamDisk operation error."RECOMMENDED ACTION: "Please collect the following info and contact TAC"REQUIRED INFO: "From PXM451) dspdate2) dsplog for this slot3) dspver"CPRO-7-HOT_STDBY
SEVERITY: InformationFORMAT: "dsphotstandby cmd %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "error while executing dsphotstandby command."RECOMMENDED ACTION: "This is an info message."REQUIRED INFO: No Required InfoCPRO-4-PORT_NOT_ADDED
SEVERITY: ErrorFORMAT: "Port has not been added for ifNum = %d; SNMP Operation = %d (GET=0/SET=1/TEST=2);"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Port absent error during a provisioning request"RECOMMENDED ACTION: "This event is loggeda) when a conn Add/Modify/Delete request is requested for a connwhich doesn't have the associated port added,b) because of a unknown software bug"REQUIRED INFO: "From PXM card, collect1) dsprevs,2) dsplog for that slot,3) dsperr for that slot,4) dsppnports.From AXSM card, collect1) dspports,2) dspcon for that connection,3) dsplns."CPRO-4-DISK_DB_UPDATE_
SEVERITY: ErrorFORMAT: "Conn = (%d.%d.%d, rec# %d); ... Operation = %d; Error = %d;"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Disk DB update on PXM Hard Disk failed"RECOMMENDED ACTION: "This event is logged when a disk DB update on PXM hard-disk fails. Since Disk is considered to be a Golden copy, this is a severe prob. Check the connection parameters that are also displayed as part of log ... Conn -> ifNum, vpi, vci, rec#; operation -> Add/Modify/Delete"REQUIRED INFO: "From PXM card, collect1) dsprevs,2) dsplog for that slot,3) dsperr for that slot,4) dsppnportsFrom AXSM card, collect1) dspports,2) dspcon for that connection,3) dsplns"CPRO-4-CONTROLLER_UPDA
SEVERITY: ErrorFORMAT: "Conn = (%d.%d.%d, rec# %d); ... Operation = %d; Error = %d;"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "PNNI Controller update on PXM failed"RECOMMENDED ACTION: "This event is logged when PNNI Controller update on PXM fails. Check the connection parameters that are displayed as part of log ... Conn -> ifNum, vpi, vci, rec#; operation -> Add/Mod/Del PNNI & AXSM dbs will be out-of-sync after this ... PNNI re-sync will take care of this problem"REQUIRED INFO: "From PXM card, collect1) dsprevs,2) dsplog for that slot,3) dsperr for that slot,4) dsppnports.From AXSM card, collect1) dspports,2) dspcon for that connection,3) dsplns."CPRO-4-GET_LCN_FAILED
SEVERITY: ErrorFORMAT: "cProGetLCN API failed for Conn -> (%d.%d.%d)"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "cProGetLCN API failed"RECOMMENDED ACTION: ""REQUIRED INFO: "From PXM card, collect1) dsprevs,2) dsplog for that slot,3) dsperr for that slot,From AXSM card, collect1) dspports,2) dspcon for that connection,3) dsplns."DDTS "infra"
CRDM-2-FATAL_ERROR
SEVERITY: Major AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Fatal Error in Core Dump Master Task"RECOMMENDED ACTION: "switchcc if Standby PXM is ready, else Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information."REQUIRED INFO: Enter the CLI commands dspcds, dspcd (for PXM and for the slot the error is found), dspver, dsperr, ls C:/FW before calling the Cisco Techincal support representative.CRDM-3-MAJOR_ERROR
SEVERITY: Minor AlertFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Major Error in Core Dump Master Task"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd (for PXM and for the slot the error is found), dspver, dsperr, ls C:/FW before calling the Cisco Techincal support representative.CRDM-4-ERROR
SEVERITY: ErrorFORMAT: "%s"FLAG: Stack TraceTHROTTLING: One TickEXPLANATION: "Minor Error in Core Dump Master Task"RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.REQUIRED INFO: Enter the CLI commands dspcds, dspcd (for PXM and for the slot the error is found), dspver, dsperr, ls C:/FW before calling the Cisco Techincal support representative.CRDM-5-WARNING
SEVERITY: WarningFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Warning from Core Dump Master Task"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCRDM-7-INFO
SEVERITY: InformationFORMAT: "%s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Info msg from Core Dump Master Task"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoDDTS "pxm-connmgm"
CSMI-5-CSMIERR
SEVERITY: WarningFORMAT: "CSMI Error %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Event is not use at the moment. Developer, please include your comment when you are using this event."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSMI-5-CSMIERRCODE
SEVERITY: WarningFORMAT: "CSMI Error Module %s Function %d Code %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Event is not use at the moment. Developer, please include your comment when you are using this event."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSMI-5-INVALIDDISKUPDA
SEVERITY: WarningFORMAT: "Got an invalid diskupdate in function %s line %d msgType %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Got an invalid diskupdate from the service module"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSMI-5-INVALIDDBREC
SEVERITY: WarningFORMAT: "Got an invalid connection record while rebuilding from disk for slot %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Got an invalid diskupdate while rebuilding from disk"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSMI-5-PSLOTINFOERR
SEVERITY: WarningFORMAT: "Unable to get the physical slot info for slot %d , line no %d rc %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Got an error while trying to retrieve the physical slot information"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSMI-5-UNKNOWNCDTYPE
SEVERITY: WarningFORMAT: "Card in slot %d is unknown/unsupported, line no %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Got a disk update for an unknown/unsupported card"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSMI-5-PIPCSENDERR
SEVERITY: WarningFORMAT: "pipc Send error in line %d, rc %d errno %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Got an error while trying to send pipc message"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSMI-5-MEMALLOCERR
SEVERITY: WarningFORMAT: "Mem alloc error in fn %s, line %d errno %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Got an error while trying to allocate memory"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSMI-4-INVALIDSLOT
SEVERITY: ErrorFORMAT: "Slot %d is either unreserved or reserved for unsupported card type, line %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Configuration exists for a card which is not reserved or reserved for unsupported card type"RECOMMENDED ACTION: Indicates an internal error detected by the PXM connection management module. It needs to be analyzed by TAC and possibly by the development team.REQUIRED INFO: Please capture the following information from the PXM45 cli and call your TAC support1) dspcds/dspcd2) dspver3) dsplog -sl <slot which is experiencing the problem>4) dsplog -sl < redundant slot if configured>5) dsperr for the above slots.6) Save the core file if requirednDDTS "config save restore"
CSR-5-CSRERR001
SEVERITY: WarningFORMAT: "CSRERR001 CSR called cleandir() with NULL input"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CSR did not pass the name of the directory to be cleaned to the routine."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR002
SEVERITY: WarningFORMAT: "CSRERR002 CSR called cleandir() with invalid input"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CSR passed invalid name of the directory to be cleaned to the routine."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR003
SEVERITY: InformationFORMAT: "CSRERR003 CSR cleandir() could not remove file \"%s\", errno %X."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CSR cleandir() could not remove file."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR004
SEVERITY: InformationFORMAT: "CSRERR004 CSR failed to call cfgupload function to create CSR filename while cleaning C:/TMP/ "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CSR received an ERROR from the cfgupload function to create the CSR filename. This call was to enable the clean up of C:/TMP/ directory of the CSR files."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR005
SEVERITY: InformationFORMAT: "CSRERR005 CSR cleanTMPdir() could not remove file \"%s\", errno %X."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CSR cleanTMPdir() could not remove file."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR006
SEVERITY: WarningFORMAT: "CSRERR006 CSR could not extract the name from the path() due to NULL input path"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CSR did not pass the path name while attempting to extract the name from the path"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR007
SEVERITY: WarningFORMAT: "CSRERR007 CSR could not extract the name from the path() due to NULL input pointer for target output"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CSR could not extract the name from the path() due to NULL input pointer for target output (parameter1 in the function"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR008
SEVERITY: WarningFORMAT: "CSRERR008 CSR could not extract the name from the path() as it could not locate the last but one occurrence of '/' due to either invalid input or vxworks error "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CSR could not extract the name from the path() as it could not locate the last but one occurrence of '/' possibly due to invalid input or a vxworks error call to strrchr"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR010
SEVERITY: InformationFORMAT: "CSRERR010 While performing a save of a file Function to extract name from path returned an error "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveCopyFileToOtherDest()Function to extract name from path returned a ERROR"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR011
SEVERITY: InformationFORMAT: "CSRERR011 While performing a save of a file Function to update text file with zipfile \"%s\", and destn dir \"%s\",returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveCopyFileToOtherDest received ERROR from csrSaveCopyToTxt"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR012
SEVERITY: InformationFORMAT: "CSRERR012 While performing a save of a file Function to copy file \"%s\", to file\"%s\",returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveCopyFileToOtherDest received ERROR from myCopyZipFIle"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR013
SEVERITY: WarningFORMAT: "CSRERR013 In function to zip files exploring depth 1, source directory to be zipped is necessary input"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveZipDirDepth1 source directory needs to be specified."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR014
SEVERITY: InformationFORMAT: "CSRERR014 In function to zip dir to depth 1 Function to zip each sub dir returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveZipDirDepth1 received ERROR from saveDir"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR015
SEVERITY: WarningFORMAT: "CSRERR015 In function to zip files exploring depth 0, source directory to be zipped is necessary input"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveZipDirDepth0 source directory needs to be specified."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR016
SEVERITY: InformationFORMAT: "CSRERR016 In function to zip files exploring depth 0 Function to extract name from path returned an error "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveZipDirDepth0()Function to extract name from path returned a ERROR"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR017
SEVERITY: InformationFORMAT: "CSRERR017 In function to zip files exploring depth 0 Function to update text with file \"%s\", and dir \"%s\",returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveZipDirDepth0 received ERROR from csrSaveToExtractName"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR018
SEVERITY: InformationFORMAT: "CSRERR018 In function to zip files exploring depth 0 Function to zip directory \"%s\", to file\"%s\",returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveZipDirDepth0 received ERROR from zipMain"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR019
SEVERITY: InformationFORMAT: "CSRERR019 In function to zip RPM files Call to zip directory to depth 0 returned ERROR"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveZipDirRPM received ERROR from csrSaveZipDirDepth0"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR020
SEVERITY: WarningFORMAT: "CSRERR020 In function to copy to txt error in opening zip file in C:/CNF/TMP/"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveCopyToTxt error opening text file in C:/CNF/TMP/"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR021
SEVERITY: WarningFORMAT: "CSRERR021 In function to copy to txt error in closing zip file in C:/CNF/TMP/"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "csrSaveCopyToTxt error closing text file in C:/CNF/TMP/"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR022
SEVERITY: WarningFORMAT: "CSRERR022 While checking if directory tree is empty, stat of file \"%s\"failed, errno %X"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "isEmptySubTree stat of file error"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR024
SEVERITY: WarningFORMAT: "CSRERR024 Cannot open file \"%s\" for bram image."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "createBramImage error opening file to store BRAM image"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR025
SEVERITY: WarningFORMAT: "CSRERR025 Cannot allocate memory for buf used to write BRAM image in file."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "createBramImage error allocating memory for buf"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR026
SEVERITY: InformationFORMAT: "CSRERR026 Call to function to get sys BRAM returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "createBramImage error returned by sysBRAMGet()"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR027
SEVERITY: WarningFORMAT: "CSRERR027 Error writing BRAM image to file \"%s\"."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "createBramImage error on fwrite"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR028
SEVERITY: WarningFORMAT: "CSRERR028 Error opening directory \"%s\"."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "clearCnfDir error opening directory"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR029
SEVERITY: WarningFORMAT: "CSRERR029 Error opening file \"%s\" to read while copying zip files "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "myCopyZipFile error opening file in read mode"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR030
SEVERITY: WarningFORMAT: "CSRERR030 Error opening file \"%s\" to write while copying zip files "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "myCopyZipFile error opening file in write mode"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR031
SEVERITY: WarningFORMAT: "CSRERR031 Line=%d Cannot allocate memory for buf used to copy zip files."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "myCopyZipFile error allocating memory for buf"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR032
SEVERITY: WarningFORMAT: "CSRERR032 Error reading file \"%s\" while copying zip files "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "myCopyZipFile error reading file "RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR033
SEVERITY: WarningFORMAT: "CSRERR033 Error writing file \"%s\" while copying zip files "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "myCopyZipFile error writing file "RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR034
SEVERITY: WarningFORMAT: "CSRERR034 No source directory provided while trying to zip individual sub-dirs while zipping source directory to depth1"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveDirCannot resolve with source directory passed to function as NULL"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR035
SEVERITY: WarningFORMAT: "CSRERR035 Error opening directory \"%s\" while trying to zip individual sub-dirs while zipping soiurce to depth 1 "FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveDir error opening source directory to zip individual sub-dirs"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR036
SEVERITY: WarningFORMAT: "CSRERR036 Function to copy to text file zipfile \"%s\", and destn dir\"%s\",returned ERROR while attempting to zip individual sub-dirs to depth1."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveDir received ERROR from csrSaveCopyToTxt"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR037
SEVERITY: WarningFORMAT: "CSRERR037 Funtion to zip directory \"%s\", to file\"%s\",returned ERROR while attempting to zip individual sub-dirs to depth1."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveDir received ERROR from zipMain"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR040
SEVERITY: WarningFORMAT: "CSRERR040 Cannot create \"%s\" , directory"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received error while creating directory"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR041
SEVERITY: WarningFORMAT: "CSRERR041 Cannot create \"%s\" , directory"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received error while creating directory"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR042
SEVERITY: WarningFORMAT: "CSRERR042 Cleaning dir \"%s\" , returned ERROR"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received error while cleaning directory using csrSaveCleanDir"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR043
SEVERITY: WarningFORMAT: "CSRERR043 Cleaning dir C:/TMP/ returned ERROR"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received error while cleaning directory using csrSaveCleanSaveFilesFromTMPDir"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR044
SEVERITY: WarningFORMAT: "CSRERR044 Cannot create file \"%s\" for bram image.Error received from function to create BRAM image."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile error received from createBRAMImageBRAM image"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR045
SEVERITY: InformationFORMAT: "CSRERR045 Function to copy to text file VERSION \"%s\",returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received ERROR from csrSaveCopyToTxt while writing version info"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR046
SEVERITY: InformationFORMAT: "CSRERR046 Function call to perform the save for the source returned ERROR"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received ERROR from the function call to save the dir/file"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR047
SEVERITY: WarningFORMAT: "CSRERR047 ERROR allocating memory to tempZipFile"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile could not allocate memory for tempZipFile"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR048
SEVERITY: WarningFORMAT: "CSRERR048 ERROR allocating memory to newZipFileName"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile could not allocate memory for newZipFileName"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR049
SEVERITY: WarningFORMAT: "CSRERR049 Function to zipdirectory \"%s\", to file\"%s\",returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received ERROR from zipMain"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR050
SEVERITY: WarningFORMAT: "CSRERR050 VxWorks function to rename file \"%s\", to file\"%s\",returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received ERROR from vxworks rename"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR051
SEVERITY: InformationFORMAT: "CSRERR051 Function to clear directory \"%s\",returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received ERROR from clearCnfDir"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR052
SEVERITY: InformationFORMAT: "CSRERR052 Function to clear directory \"%s\",returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received ERROR from csrSaveCleanDir"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR053
SEVERITY: InformationFORMAT: "CSRERR053 Function to clear directory C:/TMP/ returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received ERROR from csrSaveCleanSaveFilesFromTmpDir"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR054
SEVERITY: InformationFORMAT: "CSRERR054 Function to clear directory \"%s\" ,returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received ERROR from csrSaveCleanDir"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR055
SEVERITY: WarningFORMAT: "CSRERR055 While verifying BRAM version Error opening file \"%s\" ,using vxworks fopen"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "verifyVersion received ERROR from fopen"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR056
SEVERITY: WarningFORMAT: "CSRERR056 Error opening file \"%s\" ,while creating restore file"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "createRSFile received ERROR from fopen"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR057
SEVERITY: WarningFORMAT: "CSRERR057 Error writing file \"%s\" ,while creating restore file"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "createRSFile received ERROR from fwrite"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR059
SEVERITY: WarningFORMAT: "CSRERR059 Could not remove file \"%s\", errno %X."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "CSR cliRestore() could not remove file."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR060
SEVERITY: InformationFORMAT: "CSRERR060 Function to unzip file \"%s\", to directory \"%s\",returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "cliRestore received ERROR from unzipMain"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR061
SEVERITY: InformationFORMAT: "CSRERR061 Function verifying BRAM version returned Error"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "cliRestore received ERROR from verifyVersion"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR062
SEVERITY: InformationFORMAT: "CSRERR062 Function verifying BRAM version returned Error on second try"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "cliRestore received ERROR from verifyVersion on second try."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR063
SEVERITY: WarningFORMAT: "CSRERR063 Function to create restore file returned error"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "cliRestore received ERROR creating restore file in createRSFile."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR064
SEVERITY: WarningFORMAT: "CSRERR064 Function to reset shelf automatically returned error"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "cliRestore received ERROR from csrResetSys while attempting to reset shelf automatically"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR065
SEVERITY: InformationFORMAT: "CSRERR065 While extracting name from path, Save forced to be Aborted through CLI"FLAG: No FlagTHROTTLING: One TickEXPLANATION: " abortallsaves issued to abort the save or a modular call to set the abort flag was made while implementing funtion to extract name from path"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR066
SEVERITY: WarningFORMAT: "CSRERR066 Invalid parameters were passed to the function csrProcessErrno()."FLAG: No FlagTHROTTLING: One TickEXPLANATION: " Invalid parameters were passed to the function csrProcessErrno(). "RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSR_ABORT
SEVERITY: InformationFORMAT: "%s occurrence %d Save Aborted through CLI."FLAG: No FlagTHROTTLING: One TickEXPLANATION: " abortallsaves CLI was issued to abort saveallcnf"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRDBRST
SEVERITY: InformationFORMAT: "%s occurrence %d DB Counter reset"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "While save in progress DB counter initialisation failed"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRDBUPD
SEVERITY: InformationFORMAT: "CSR_DBUPDATED %s occurrence %d DB updated."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "DB status in csrTable.txt is updated successfully"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR068
SEVERITY: WarningFORMAT: "CSRERR086 While attempting to clean the C:/TMP directory, config upload created CSR filename without '_'"FLAG: No FlagTHROTTLING: One TickEXPLANATION: " WHile cleaning C:/TMP, call to config upload function to create CSR filename, returned a file name in wrong format"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-SVALLCNF_DONE
SEVERITY: InformationFORMAT: "saveallcnf shelf configuration saved in %s. Size is %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveallcnf shelf configuration saved "RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-SVALLCNF_WARNIN
SEVERITY: WarningFORMAT: "saveallcnf: Failed to list files in shelf configuration %s. Size is %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveallcnf: The saved file is corrupted. The system failed to list the files contained in it. User should retry."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR069
SEVERITY: WarningFORMAT: "CSRERR069 While saving DBUpdated=%s to csrTable.txt encountered error"FLAG: No FlagTHROTTLING: One TickEXPLANATION: " Encountered error while writing into csrTable.txt"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR070
SEVERITY: WarningFORMAT: "CSRERR070 While saving check to db updates returned error %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "call to wrapper func to DB & Shm failed"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR071
SEVERITY: WarningFORMAT: "CSRERR071 Abort the saving process if invoked through SNMP %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "If invoked thru SNMP and Db is found updated abort process"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR073
SEVERITY: WarningFORMAT: "CSRERR073 writing 'Counters'(failed init)in csrTable.txt returned error %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "call to 'csrSaveCopyToTxt'(failed init) returned error"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR074
SEVERITY: WarningFORMAT: "CSRERR074 writing 'Counters' in csrTable.txt returned error %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "call to 'csrSaveCopyToTxt() returned error"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR075
SEVERITY: WarningFORMAT: "CSRERR075 call to ssiDiskDbLslotCounterGet failed %s"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "In the wrapper func csrIsDbShmUpdated call to Db API failed"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR076
SEVERITY: WarningFORMAT: "CSRERR076 Func to copy to status file VERSION \"%s\",returned ERROR."FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveFile received ERROR from csrSaveCopyToTxt while writing version info"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR077
SEVERITY: WarningFORMAT: "CSRERR077 User response was negative when prompted about DB updates(V3)"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "call to csrQueryUserIfUpdates()(ver3) returned error"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR078
SEVERITY: InformationFORMAT: "CSRERR078 User selects Yes when prompted to restore inconsistent file"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "In csrQueryUserIfUpdates() user selected Yes when queried"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR079
SEVERITY: WarningFORMAT: "CSRERR079 User response was negative when prompted about DB updates(V4)"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "call to csrQueryUserIfUpdates()(ver4) returned error"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR080
SEVERITY: InformationFORMAT: "CSRERR080User selects Yes-prompted Status & Version file doesnt match\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "user selected Yes when queried"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR081
SEVERITY: InformationFORMAT: "CSRERR081User selects NO -prompted Status & Version file doesnt match\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "user selected NO when queried"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR082
SEVERITY: InformationFORMAT: "CSRERR082restoreallcnf CLI not executed because of wrong syntax\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "wrong syntax for restoreallcnf"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR083
SEVERITY: InformationFORMAT: "CSRERR083User answered NO to prompt. restoreallcnf CLI not executed\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "At the promt confirming whether to execute restoreallcnf CLI, user answered NO"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-MINICSRINFO
SEVERITY: InformationFORMAT: "miniCSR(Line%d) errno=%d, %s %s\n"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "An error occurred in miniCSR"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-MINICSRWARNING
SEVERITY: WarningFORMAT: "miniCSR(Line%d) errno=%d, %s %s\n"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "An error occurred in miniCSR"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-FLAG_RESET_ERR
SEVERITY: WarningFORMAT: "Could not reset abort flag\n"FLAG: No FlagTHROTTLING: No ThrottlingEXPLANATION: "An error occured while resetting the abort flag"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-ZIPAPIERR_001
SEVERITY: WarningFORMAT: "Can not overwrite existing zip file %s\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "ZippMain Attempt to overwrite a zipfile is rejected"RECOMMENDED ACTION: "Call this API with OVERWRITE_BIT set"REQUIRED INFO: No Required InfoCSR-5-ZIPAPIERR_002
SEVERITY: WarningFORMAT: "Can not open zip file %s\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "zippMain Destination Zip file can not be opened"RECOMMENDED ACTION: "Escalate"REQUIRED INFO: No Required InfoCSR-5-ZIPAPIERR_003
SEVERITY: WarningFORMAT: "Can not close zip file %s\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "zippMain Destination Zip file can not be closed"RECOMMENDED ACTION: "Escalate"REQUIRED INFO: No Required InfoCSR-5-ZIPAPIERR_004
SEVERITY: WarningFORMAT: "Can not read file %s\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "zipOneFile file can not be read"RECOMMENDED ACTION: "Escalate"REQUIRED INFO: No Required InfoCSR-5-ZIPAPIERR_005
SEVERITY: WarningFORMAT: "Can not write file %s\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "zipOneFile file can not be written"RECOMMENDED ACTION: "Escalate"REQUIRED INFO: No Required InfoCSR-5-ZIPAPIERR_006
SEVERITY: WarningFORMAT: "Can not close file %s\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "zipOneFile file can not be closed"RECOMMENDED ACTION: "Escalate"REQUIRED INFO: No Required InfoCSR-5-ZIPAPIERR_007
SEVERITY: WarningFORMAT: "ZIPAPIERR007 Disk full, Process has been aborted %s, Line%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "As the disk is full, saveallcnf has been aborted."RECOMMENDED ACTION: "Escalate"REQUIRED INFO: No Required InfoCSR-1-CSRERR084
SEVERITY: FatalFORMAT: "CSRERR084 %s"FLAG: Write to BramTHROTTLING: One TickEXPLANATION: "The restoreallcnf operation has failed for the specified reason. The node might have come up or not depending on the nature of the failure with possibly partial configuration restored. This could be due to invalid or corrupted configuration file being used to restore. It could also happen due to lack of disk space or failure to access the disk or BRAM due to hardware failures. The consequence of this error is that the node would have come up with unstable or partial configuration."RECOMMENDED ACTION: "If the controller card come up, check the event logs for events prior to this event for possible cause of failure. Check the disk space on all drives and if the operation has failed due to lack of disk space, make some room and retry. Otherwise, try retransferring the configuration file and retry restoring the configuration. If this error persists, call TAC."REQUIRED INFO: "Collect event and error logs."CSR-5-CSRERR085
SEVERITY: WarningFORMAT: "CSRERR085Clean Up of exclusion resources Failed\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Resource cleanup has failed"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-7-CSRERR086
SEVERITY: InformationFORMAT: "CSRERR084Offline tools %s %s was absent and will not be zipped\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "saveallcnf found F:/OFFLINE_TOOLS dir or the correct offline tools file to be absent and could not save it"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR087
SEVERITY: WarningFORMAT: "CSRERR085 Update to csrStatus.txt with %s , %s returned error"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "call to 'csrSaveCopyToTxt' returned error"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR088
SEVERITY: WarningFORMAT: "CSRERR086 C:/version file cannot be opened. Either missing or vxWorks fopen() returned error"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "cannot open C:/version"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-CSRERR089
SEVERITY: WarningFORMAT: "CSRERR087 Line %d C:/version file does not contain correct data"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "C:/version has incorrect data"RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-INVSESNPTR
SEVERITY: WarningFORMAT: "Call to cliGetSesnByInfo() returned NULL. TaskName %s %s %d at line number %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Call to cliGetSesnByInfo returned NULL. Thus, we cannot set the timeout value for the session."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-SESNTIME_ERR
SEVERITY: WarningFORMAT: "Error while setting timeout value of the session to %d at linenum %d"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "Setting of the timeout value of the CLI session failed."RECOMMENDED ACTION: No Recommended ActionREQUIRED INFO: No Required InfoCSR-5-ZIPAPIERR_008
SEVERITY: WarningFORMAT: "ZipAPI Error %s File[%s], errno=%d\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "stat() call has failed"RECOMMENDED ACTION: "Escalate"REQUIRED INFO: No Required InfoDDTS "ccma"
CSTA-5-LOG
SEVERITY: WarningFORMAT: "CSTAT line %d error code %ld; %ld %ld\n"FLAG: No FlagTHROTTLING: One TickEXPLANATION: "If the error number is 40961 - Info message. 40962 - This is an unused error value. Please ignore. 40963 - This is an unused error value. Please ignore. 40964 - Device driver error. 40965 - This is an unused error value. Please ignore. 40966 - This message says that there was an internal software error while opening a file to create the stats file. The stats file generated at this instant may not be available. 40967 - This message says that there was an internal software error while writing a file to create the stats file. The stats file generated at this instant may not be available. 40968 - This message says that there was an internal software error while closing a file to create the stats file. The stats file generated at this instant may not be available. 40969 - Connection stats collection has failed. 40970 - No more free buffer available for conn stats. The number of connections for which stats can be enabled has exceeded the limit. 40971 - This is an unused error value. Please ignore. 40972 - This is an unused error value. Please ignore. 40973 - Error while zipping the stats file. 40974 - Error while renaming zipped stats file. 40976, 40977, 40978, 40979, 40980, 40981, 40982,RECOMMENDED ACTION: "If the error number is 40961 - No action is needed. 40962 - No action is needed. 40963 - No action is needed. 40964 - Please collect the following info. Contact TAC 40965 - No action is needed. 40966 - Please collect the following info. Contact TAC 40967 - Please collect the following info. Contact TAC 40968 - Please collect the following info. Contact TAC 40969 - Please collect the following info. Contact TAC 40970 - Disable stats collection for connections for which stats is no longer needed and try again.REQUIRED INFO: "If the error number is 40961 - No info need to be taken. 40962 - No info need to be taken. 40963 - No info need to be taken. 40964 - On PXM451. dspdate2. dsplog -sl <slot that experienced this error>3. dspcd <slot that experienced err>40965 - No info need to be taken. 40966 - On PXM451. dspdate2. dsplog -sl <slot that experienced this error>3. dspcd <slot that experienced err>On AXSM1. sfmdbshow 440967 - On PXM451. dspdate2. dsplog -sl <slot that experienced this error>3. dspcd <slot that experienced err>