-
Catalyst Supervisor Engine 32 PISA IOS Command Reference, 12.2ZY
-
Index
-
Preface
-
Command-Line Interface
-
action to channel-group
-
channel-protocol to class-map
-
clear cable-diagnostics tdr to copy /noverify
-
define interface-range to duplex
-
eigrp event-log-size to mls exclude
-
mls flow to pagp port
-
platform ip features pisa to process-min-time percent
-
rcv-queue to show bootvar
-
show cable-diagnostics to show ip cache
-
show ip cef to show mls asic
-
show mls cef to show qm-sp
-
show queueing to show vtp
-
shutdown vlan to test cable-diagnostics
-
tunnel udlr address-resolution to username
-
verify to wrr-queue
-
wrr-queue cos-trap to wrr-queue threshold
-
Acronyms
-
Acknowledgments for Open-Source Software
-
Table Of Contents
Symbols - Numerics - A - B - C - D - E - F - G - H - I - J - L - M - N - O - P - Q - R - S - T - U - V - W - X -
Index
Symbols
# character (privileged EXEC mode prompt) 1-6
* (asterisk) 1-8
+ (plus sign) 1-8
. (period) 1-8
? command 1-2
| (pipe or vertical bar)
specifying alternative patterns 1-10
Numerics
802.1Q
disabling
tunneling 2-338
displaying
enabled ports 2-704
tunneled protocols 2-886
enabling
tunneling 2-338
encapsulation
disabling 2-132
enabling 2-132
mapping ISL VLANs 2-1294
setting
CoS value 2-340
drop threshold globally 2-343
drop threshold on an interface 2-341
maximum processed protocol packets 2-344
mode 2-1213
port interface type 2-1213
setting trunk encapsulation characteristics 2-1227
specifying
EtherType values 2-1211
802.1Q tagging
disabling on VLANs 2-1288
displaying information 2-1119
enabling on VLANs 2-1288
802.1s
802.1w
802.1X
allowing multiple hosts 2-122
default settings 2-120
disabling
globally 2-126
periodic authentication of client 2-125
disallowing multiple hosts 2-122
displaying
information for all interfaces 2-705
enabling
globally 2-126
periodic authentication of client 2-125
resetting to defaults 2-120
setting
authentication timer 2-127
port control values 2-123
reauthentication count 2-121
802.3ad
802.3af
configuring administrative mode 2-612
A
abbreviating commands
context-sensitive help 1-1
access control lists
accessing
DFC-equipped modules 2-642
module-specific CLI 2-660
access lists
IPX, time ranges 2-1245
access maps
applying 2-1290
specifying sequence 2-385
acknowledgments for open-source software
regular expression library B-1
Softfloat B-1
ACL counters
displaying for packetsswitched in hardware 2-1099
ACLs
clearing
counters 2-65
clearing statistical information 2-40
defining
time ranges 2-1245
enabling
time-based ACLs 2-1245
merge
displaying current method 2-743
port access map
creating 2-603
deleting 2-603
removing
time limitation 2-1245
selecting
BDD-based merge method 2-398
ODM-based merge method 2-398
TCAM
setting default action during update 2-400
acronyms, list of A-1
Address Resolution Protocol
adjacency
displaying
node information 2-914
table information 2-671
aggregate counts
missed flows 2-1000
aggregate policer
clearing statistics and token counts in high-rate and low-rate policer buckets 2-76
defining 2-462
MLS QoS
enabling 2-500
removing 2-462
aggregate policers
removing
from current class 2-595
specifying
for current class 2-595
aggressive UDLD
aging time
MAC address table 2-369
ARP
displaying table 2-674
ARP ACL
adding clauses 2-5
defining
access list 2-5
entering submode 2-5
removing from list 2-5
ASIC
displaying
type 2-675
version 2-675
assigning an interface to a channel group 2-22
ATA flash
audience 1-xxiv
authentication
setting username 2-1272
authentication proxy
watch list
adding IP address 2-185
clearing entries 2-43
configuring 2-185
disabling 2-185
displaying 2-791
enabling 2-185
setting maximum login attempts 2-183
authorization traps during unknown context error
disabling 2-1147
enabling 2-1147
autonegotiation
setting delay timer 2-1237
B
BDD
selecting ACL merge method 2-398
BGP
configuring maximum number of parallel routes 2-390
enabling
deterministic processing time regular expression engine 2-11
regular expression engine 2-11
Bidir
configuring
RP RPF scan interval 2-429
displaying
cached rendezvous points 2-869
DF interface information 2-859
information 2-959
IP multicast routing table information 2-845
IP multicast table information 2-840, 2-845
bidirectional CDP
configuring administrative mode 2-612
bidirectional PIM
binary decision diagrams
boot configuration file
returning to default location 2-13
specifying device and filename 2-13
BOOT environment variable
displaying information 2-678
specifying 2-15
bootflash
file system, displaying information 2-676
booting
from Flash 2-15
boot system command 2-15
Border Gateway Protocol
BPDU
conversion over protocol tunneling links 2-18
BPDU filtering
disabling
by default 2-1176
on an interface 2-1150
enabling
by default 2-1176
on an interface 2-1150
BPDU guard
disabling
by default 2-1178
on an interface 2-1152
enabling
by default 2-1178
on an interface 2-1152
bridged flows
disabling
globally for NDE 2-220
inbound NDE 2-219
enabling
globally for NDE 2-220
inbound NDE 2-219
bridged traffic
microflow policing 2-464
bridge protocol data unit
byte count, displaying 2-760
C
cable diagnostics
TDR
clearing all interfaces 2-33
clearing specific interface 2-33
displaying test results 2-681
running test 2-1243
CAM table usage monitoring
disabling 2-376
enabling 2-376
CASA
configuring
function as a forwarding agent 2-187
disabling
function as a forwarding agent 2-187
CDP
displaying
neighbor information 2-685
CEF
clearing
IP per-prefix accounting statistics 2-67
IPv6 per-prefix accounting statistics 2-68
consistency checker parameters
disabling 2-189
enabling 2-189
consistency checker types
disabling 2-189
enabling 2-189
disabling
MLS per-prefix accounting 2-414
rate-limiting 2-417
tunnel fragmentation 2-407
displaying
IPv4 unicast address 2-926, 2-941
maximum route system configuration 2-942
next-hop information 2-808
VLAN configuration information 2-808
VLAN interface status 2-808
enabling
missing prefix detection 2-189
MLS per-prefix accounting 2-414
rate-limiting 2-417
tunnel fragmentation 2-407
epoch
beginning new epoch 2-44
displaying information 2-803
incrementing 2-44
inconsistencies
clearing 2-46
displaying 2-805
selecting
load-balancing algorithm 2-188
setting
checker type 2-189
elapsed time 2-189
load balancing 2-415
period between scans 2-189
rate-limiting 2-417
route limiting per protocol 2-405
specifying
maximum number of prefixes to check per scan 2-189
passive scan check 2-189
changing to untrusted port state 2-488, 2-508
chassis
displaying
chassis MAC address ranges 2-683
current and peak traffic meter readings 2-683
model type 2-750
percentage of backplane utilization 2-683
product number 2-750
serial number 2-750
switching clock failure recovery mode 2-683
chassis serial number, displaying 2-748
checksum
computing
MD5 signature 2-1273
verifying
compressed image 2-142
Flash memory file 2-1273
CIR
setting rate 2-462
circular cache-header buffer, displaying contents 2-838
Cisco Appliance Services Architecture
Cisco Express Forwarding
Cisco IOS VLAN subinterface
displaying information 2-1128
class (policy-map) command 2-30
class map
configuring
match criteria on IP packets 2-387
match criteria on IPv6 packets 2-387
match criteria per protocol 2-387
displaying information 2-689
MLS QoS
enabling 2-502
removing
match criteria per protocol 2-387
class maps
configuration mode
accessing 2-26
class policies
configuring 2-30
default class, configuring 2-30, 2-601
clearing a Gigabit Ethernet interface 2-38
CLI
accessing
module-specific CLI 2-642
remote login 2-642
string search
alternation 1-10
anchoring 1-10
expressions 1-7
filtering 1-7
multiple-character patterns 1-9
multipliers 1-9
parentheses for recall 1-11
searching outputs 1-7
single-character patterns 1-8
using 1-7
client ID 2-1065
CNS
Cisco Networking Services
command-line interface
command modes
accessing 1-5
exiting 1-5
understanding 1-5
commands
executing multiple interfaces simultaneously 2-166
mode types 1-5
committed information rate
compression mode
turning off 2-443
turning on 2-443
configuration
entering line configuration collection mode 2-351
specifying terminal line 2-351
configuration, saving 1-11
connection attempted by a failed server
changing to defaults 2-646
defining elapsed times 2-646
consistency checker
configuring 2-432
disabling 2-432
displaying
information 2-956
enabling 2-432
Content Switching Module
control plane policing
cooling
displaying information 2-712
CoPP
attaching
policy map to control plane 2-658
configuring
traffic policing 2-598
displaying
policy-map class information 2-1055
entering configuration mode 2-96
removing
service policy from control plane 2-658
copying files 2-98
enabling automatic checksum verification 2-142
validating image 2-142
copy inner to out .1pbits
configuring 2-472
deleting an entry 2-472
CoS
inner CoS to outer CoS translation
displaying configuration information 2-987
displaying runtime version information 2-987
mapping 2-472
CoS mutation maps
attaching to interface 2-467
removing from interface 2-467
CoS to CoS
attaching
CoS mutation map to interface 2-467
removing
CoS mutation map from interface 2-467
CoS to CoS mapping
configuring 2-472
CoS value
defining default value 2-466
CoS values
mapping to strict-priority queue 2-615
returning to default mappings 2-615
counters
clearing hardware interface counters 2-35
clearing interface counters 2-35
clearing NetFlow counters 2-37
displaying
interface counter information 2-690
CPU time
guaranteeing processing time 2-655
CSM
shutting down 2-157
custom EtherTypes
specifying EtherType values 2-1211
D
DAI
adding
clauses to ARP ACL 2-5
applying ARP ACL to VLAN 2-171
clearing
log buffer status 2-41
statistics 2-42
configuring
IP ARP log buffer 2-175
defining
ARP ACL 2-5
disabling
globally 2-180
IP ARP inspection checks 2-178
displaying
log buffer status 2-789
status for VLANs 2-786
DoS protection 2-173
enabling
globally 2-180
IP ARP inspection checks 2-178
entering ARP ACL submode 2-5
removing
ARP ACL 2-5
setting
per-port configurable trust state 2-177
dead process statistics, displaying 2-905
debounce timer
configuring 2-353
disabling 2-353
displaying debounce timer configuration 2-763
enabling 2-353
default form of a command, using 1-7
delimiter
configuring for MLS QoS 2-504
denial of service
designated forwarder
destination address
MLS QoS
setting statistics data export destination address 2-505
deterministic processing time regular expression engine
disabling 2-11
enabling 2-11
DF
displaying interface information 2-859
DFC
remote login
remote login command 2-642
DHCP
clearing
snooping binding entries 2-47
snooping database entries 2-47
snooping statistical entries 2-47
disabling
all interfaces as trusted sources 2-191
interface as a trusted source 2-192
displaying
configured trusted interfaces 2-809
enabling
all interfaces as trusted sources 2-191
interface as a trusted source 2-192
snooping binding
clearing table entries 2-47
snooping database
clearing table entries 2-47
snooping statistical
clearing table entries 2-47
specifying
connected routes 2-193
DHCP bindings
configuring bindings 2-195
DHCP snooping
configuring
abort timeout interval 2-197
database 2-197
number of DHCP messages received 2-201
write-delay time 2-197
disabling
global 2-194
MAC address comparison 2-203
on a group of VLANs 2-204
on a VLAN 2-204
tunnel interface 2-202
displaying
binding table entries 2-812
configuration information 2-810
DHCP database status 2-815
statistical information 2-810
enabling
global 2-194
MAC address comparison 2-203
on a group of VLANs 2-204
on a VLAN 2-204
tunnel interface 2-202
enabling option 82 2-199
establishing binding configuration 2-195
specifying
URL for storing entries 2-197
digital optical monitoring
directed broadcasts
disabling 2-422
displaying information 2-914
enabling 2-422
directories
creating 2-397
setting the default 2-20
disabling DNS lookups 2-243
Distributed Forwarding Card
documentation
conventions 1-xxv
organization 1-xxiv
DOM
disabling
transceiver traps 2-1142
displaying
transceivers operational information 2-777
transceivers threshold violations 2-777
enabling
transceiver traps 2-1142
DoS
configuring
traffic policing 2-598
CoPP
attaching policy map to control plane 2-658
displaying policy-map class information 2-1055
entering configuration mode 2-96
removing service policy from control plane 2-658
disabling
rate limiting 2-417
enabling
rate limiting 2-417
entering
CoPP configuration mode 2-96
setting
rate limits 2-417
DoS protection
ARP broadcast 2-491
configuring
IPv4 multicast rate limiters 2-516
IPv6 multicast rate limiters 2-518
configuring DAI 2-173
disabling
IPv4 multicast rate limiters 2-516
IPv6 multicast rate limiters 2-518
displaying information 2-994
rate limiters
configuring CEF rate limiters 2-523
configuring for ACL-bridged rate limiters 2-521
configuring for Layer 3 security rate limiters 2-528
configuring for unicast packets 2-525
configuring for VACL-log cases 2-529
disabling 2-513
disabling CEF rate limiters 2-523
disabling for ACL-bridged rate limiters 2-521
disabling for Layer 3 security rate limiters 2-528
disabling for unicast packets 2-525
enabling 2-513
enabling CEF rate limiters 2-523
enabling for ACL-bridged rate limiters 2-521
enabling for Layer 3 security rate limiters 2-528
enabling for unicast packets 2-525
enabling for VACL-log cases 2-529
rate limiters for VACL-log cases
disabling for VACL-log cases 2-529
dot1q
dot1x
double-tagged Q-in-Q
DSCP
attaching
DSCP mutation map to interface 2-468
defining
mutation mapping 2-477
displaying
mutation mapping 2-982
removing
DSCP mutation map from interface 2-468
DSCP mutation maps
attaching to interface 2-468
removing from interface 2-468
DSS
displaying range invalidation profile 2-708
dualmode uplink
selecting connector type 2-396
duplex mode
configuring 2-129
DWRR queues
configuring
bandwidth 2-1299
dynamic ARP inspection
Dynamic Host Configuration Protocol
dynamic MAC address entries
clearing 2-63
dynamic SVI
accessing 2-168
creating 2-168
deleting 2-168
E
egress
attaching
DSCP mutation map to interface 2-468
defining
DSCP mutation mapping 2-477
DSCP-to-CoS mapping 2-474
DSCP-to-DSCP mapping 2-477
DSCP-to-EXP mapping 2-476
EXP mutation mapping 2-480
EXP-to-EXP mapping 2-480
ingress-EXP-to-DSCP mapping 2-479
deleting
DSCP-to-CoS mapping 2-474
DSCP-to-DSCP mapping 2-477
DSCP-to-EXP mapping 2-476
EXP-to-EXP mapping 2-480
ingress-EXP-to-DSCP mapping 2-479
displaying
DSCP mutation mapping 2-982
mode information 2-956
queueing information 2-1069
removing
DSCP mutation map from interface 2-468
egress replication capability 2-426
EIGRP
setting
event log size 2-131
enabling
routing 2-281
encapsulation
802.1Q
disabling 2-132
enabling 2-132
ISL
disabling 2-133
enabling 2-133
Enhanced Address Recognition Logic
enhanced password security
establishing 2-1272
entering VLAN-configuration submode 2-1286
environmental alarms
displaying information 2-709
environment variables
BOOT, specifying 2-15
EOBC interface
displaying information 2-718
EoMPLS
disabling
routing 2-570
VLAN based forwarding 2-570
enabling
routing 2-570
VLAN based forwarding 2-570
epoch
displaying information 2-803
incrementing 2-44
rebuilding CEF table 2-44
error counters
displaying summary 2-1102
error detection
setting
module action during packet buffer memory failures 2-140
error disable
detection
configuring timer 2-136
packet buffer errors 2-136
specifying recovery cause 2-136
recovery
configuring timer 2-138
displaying information 2-724
specifying recovery cause 2-138
state
displaying information 2-770
error disable detection
displaying information 2-722, 2-723
ERSPAN
adding interfaces or VLANs 2-565
deleting interfaces or VLANs 2-565
deleting session 2-565
displaying
session information 2-1014
ending session 2-560
entering destination-session configuration mode 2-560
entering source-session configuration mode 2-560
starting new session 2-565
starting session 2-560
tables
destination session configuration mode syntaxes 2-566
source session configuration mode syntaxes 2-567
EtherChannel
assigning interface to an EtherChannel group 2-22
displaying
information 2-725
guard misconfiguration detection
detecting 2-1154
disabling 2-1154
enabling 2-1154
error message 2-1154
minimum links
setting 2-609
removing interface from an EtherChannel group 2-22
Ethernet over Multiprotocol Label Switching
EtherTypes
specifying values 2-1211
event tracing
configuring
global configuration mode 2-555
privileged EXEC mode 2-552
Exception Recovery Manager
EXEC-level commands
issuing in other modes 2-119
executing remote switch command 2-641
explicit host tracking
disabling 2-227
enabling 2-227
explicit tracking
disabling for MLDv2 snooping 2-319
displaying
database 2-884
displaying information 2-1002
enabling for MLDv2 snooping 2-319
IGMP snooping
limiting size of database 2-235
MLDv2 snooping
limiting size of database 2-323
EXP MAP
attaching
EXP mutation map to interface 2-469
removing
EXP mutation map from interface 2-469
EXP mutation maps
attaching to interface 2-469
removing from interface 2-469
export interval
MLS QoS
setting 2-507
expressions
matching multiple expression occurrences 1-9
multiple-character patterns 1-9
multiplying pattern occurrence 1-11
single-character patterns 1-8
specifying alternative patterns 1-10
extended MAC access list
defining 2-366
extended-range VLANs
configuring
characteristics in capture mode 2-1209
STP 2-1184
creating dynamic SVI 2-168
defining
PVLAN association 2-1224
deleting
dynamic SVI 2-168
ERSPAN session 2-565
PVLAN association 2-1224
RSPAN session 2-560
SPAN session 2-560
disabling capture mode 2-1207
displaying
current operating information 2-1077
filter information 2-1120
enabling capture mode 2-1207
entering config-VLAN mode 2-1280
executing a command on multiple interfaces 2-166
setting
when in access mode 2-1200
starting
new ERSPAN session 2-565
new RSPAN session 2-560
new SPAN session 2-560
extended system ID display
disabling 2-1156
enabling 2-1156
external column memory
F
fan trays
displaying part number 2-713
fan-trays
setting version 2-154
fast software upgrade
feature interaction engine
feature manager
displaying
CBAC-configured ACL lists and ports 2-733, 2-741
dynamic reflexive entries 2-742
general information 2-730
inband packet count 2-732
per-interface information 2-734, 2-737
per-VLAN information 2-744
summaries 2-743
FIB TCAM exception
displaying status for IPv4, IPv6, and MPLS protocols 2-721
FIB usage
displaying 2-947
field A-4
field programmable devices
field-replaceable unit
field upgradeable ROMMON
upgrading
route processor 2-1270
switch processor 2-1270
files
copying 2-98
disabling automatic image verification 2-98
enabling automatic checksum verification 2-142
validating image 2-142
file system
erase 2-134
file system consistency check
Firewall Services Module
Flash file system
check and repair 2-148
checking for damage 2-148
creating new directory 2-397
directory recovery 2-1266
enabling fsck utility 2-148
file recovering 2-1266
format 2-145
permanently deleting files 2-1189
setting the default 2-20
verify checksum 2-1273
Flash memory
booting automatically 2-15
formatting 2-145
Flexlink
disabling 2-1204
displaying
Flexlink pairs 2-775
enabling 2-1204
flow control
configuring receive mode 2-143
configuring send mode 2-143
displaying configuration information 2-766
port guidelines 2-144
flow fragments
permit configuration 2-170
flow mask
restoring 2-411
specifying 2-411
fm
Frame Relay
displaying traffic 2-752
specifying
interval to calculate average load 2-355
Frame Relay MIB enhancement
specifying
interval to calculate average load 2-355
FRU
displaying IDPROM information 2-748
displaying status information 2-713
fsck utility
enabling 2-148
setting automatic mode 2-148
FSU
redundancy force-switchover command 2-638
G
GBIC
displaying type 2-757
GBTE
displaying tunnel information 2-1022
Gigabit Ethernet interface
clearing hardware logic 2-38
Gigabit Ethernet WAN
global configuration mode, summary 1-6
group cache entries
clearing 2-49
Guaranteed Bandwidth TE
H
half-duplex mode
configuring 2-129
hardware
displaying
FIB TCAM exception status 2-721
verifying programmed values 2-1066
hardware ACL counters
displaying information for packets switched in hardware 2-1099
hardware interface counters
clearing 2-35
hardware Layer 3 switching
disabling
tunnel fragmentation 2-407
displaying
adjacency node information 2-914
adjacency table information 2-671
entry information 2-909
exception status 2-920
hardware load-sharing information 2-919
hardware table entry information 2-922
IP entry information 2-926
maximum route system configuration 2-942
number of prefixes in hardware Layer3 switching table 2-947
packet information 2-947
priority information 2-920
RPF information 2-945
statistical information 2-946
TCAM entry index information 2-926, 2-941
enabling
tunnel fragmentation 2-407
HSRP 2-1195
setting
route limiting per protocol 2-405
hardware logic
clearing on VLANs 2-39
hardware resources
displaying information 2-1032
hardware switching
configuring
consistency checker 2-432
flow statistics message from SP to RP 2-434
disabling
checksum error checking 2-543
consistency checker 2-432
globally 2-541
ingress replication mode 2-435
Layer 3 error checking 2-543
length consistency check 2-543
unicast traffic 2-542
displaying
(*,G) shortcuts 2-930
Bidir information 2-930
CEF table information 2-807
CEF table information in compact format 2-930
consistency checker information 2-956
information based on (*,G/m) entries 2-930
information based on (S,G) shortcuts 2-930
information based on Bidir (*,G/m) shortcuts 2-930
information based on group address 2-930
information based on IP subnet prefix 2-930
information based on RPF VLAN ID 2-930
information based on source IP 2-930
multicast replication capabilities 2-956
VRF CEF table information 2-949
enabling
checksum error checking 2-543
consistency checker 2-432
globally 2-541
ingress replication mode 2-435
Layer 3 error checking 2-543
unicast traffic 2-542
health monitoring diagnostic tests
configuring 2-108
helper addresses, IP 2-832
host connection
optimizing port configuration 2-1198
Hot Standby Router Protocol
HSRP
configuring
hardware Layer 3 switching 2-1195
initialization delay 2-1191
tracking 2-1193
disabling
delay period 2-1191
displaying
delay period information 2-1092
I
ICC
displaying counter and status information 2-746
ICMPv6 neighbor-discovery ACLs
disabling
TCAM support optimization 2-592
enabling
TCAM support optimization 2-592
IDPROM
displaying information 2-748
ifIndex persistence
clearing previously interface configuration mode SNMP ifIndex commands 2-1136
disabling globally 2-1143
disabling on an interface 2-1138
enabling globally 2-1143
enabling on an interface 2-1138
IGMP
clearing IGMP group cache entries 2-49
configuring
last member query interval 2-224
TCN queries 2-245
disabling
proxy reporting 2-227
displaying
explicit tracking information 2-1002
explicit-tracking status 2-822
interface configuration information 2-822
interface status information 2-822
multicast groups 2-819
snooping information for VLAN interface 2-822
status and configuration information 2-822
status and configuration information for VLAN 2-822
explicit host tracking
disabling 2-227
enabling 2-227
rate limit
snooping
clearing statistical information 2-51
configuring a Layer 2 port as a multicast router port 2-236
configuring fast leave 2-229
configuring last member query interval 2-233
disabling 2-225
displaying information 2-825
displaying rate limit information 2-826
displaying statistical information 2-827
enabling 2-225
enabling multicast support within a subnet 2-238
enabling querier function 2-238
limiting size of explicit tracking database 2-235
maximum number of Layer 2 entries 2-232
periodic flooding of multicast packets 2-242
setting incoming message rate limit 2-240, 2-323
IGMP snooping
configuring
last member query interval 2-233
maximum number of Layer 2 entries 2-232
disabling 2-225
explicit host tracking 2-227
fast leave processing 2-229
multicast support within a subnet 2-238
enabling 2-225
explicit host tracking 2-227
fast leave processing 2-229
multicast support within a subnet 2-238
multicast router
learning method, configuring 2-236
next-hop interface, specifying 2-236
images
disabling verification for current operation 2-98
enabling automatic checksum verification 2-142
validating image 2-142
inactive state
displaying reason for the inactive state 2-770
informs, enabling 2-1140
ingress
attaching
CoS mutation map to interface 2-467
EXP mutation map to interface 2-469
defining
CoS-to-DSCP mapping 2-471
defining IP precedence-to-DSCP mapping 2-482
deleting
CoS-to-DSCP mapping 2-471
deleting IP precedence-to-DSCP mapping 2-482
displaying
queueing information 2-1069
removing
CoS mutation map from interface 2-467
EXP mutation map from interface 2-469
inline power
configuring administrative mode 2-612
displaying
power consumed by module 2-1061
status information 2-1061
inner CoS to outer CoS translation
defining 2-472
displaying 2-987
mapping 2-987
instance numbering
mapping 2-159
returning to default 2-159
intelligent traffic redirect 2-587, 2-1048
inter-card communication
interface accounting information, displaying 2-755
interface configuration mode
entering 2-161
summary 1-6
table defining modes 1-6
interface counters
displaying information 2-690
interface-range macro
creating 2-101
interfaces
configuring
duplex mode 2-129
half-duplex mode 2-129
interface speeds 2-1186
displaying
accounting information 2-755
administrative status 2-773, 2-775
description 2-765
error counters 2-760
error-disabled state 2-770
flow control information 2-766
interface capabilities 2-757
PVLAN mapping 2-769
status 2-765
status summary 2-772
total number of interface VLANs 2-772
total suppression discard counts 2-760
traffic 2-752
trunk counters 2-760
trunk information 2-780
entering interface configuration mode 2-161
switching ports
displaying administrative and operational status 2-773
displaying Flexlink pairs 2-775
displaying status 2-773, 2-775
intermediate system-to-intermediate system
internal VLAN allocation
configuring 2-1292
default setting 2-1292
displaying
allocation information 2-1122
internal VLANs
displaying status 2-1111
Internet Group Management Protocol
Internetwork Packet Exchange
inter packet gap
interprocessor communication
interrupt throttling
clearing
counters 2-81
displaying
information 2-1028
Inter-Switch Link VLANs
IP
clearing
access list statistical information 2-40
displaying interface usability status 2-831
displaying IPv4 unicast address 2-926, 2-941
NetFlow
enabling switching 2-309
IP ARP
applying ARP ACL to VLAN 2-171
clearing
DAI statistics 2-42
log buffer status 2-41
configuring
log buffer 2-175
controlling packet logging 2-181
disabling
DAI 2-180
inspection check 2-178
displaying
DAI status 2-786
log buffer status 2-789
enabling
dynamic inspection 2-180
inspection check 2-178
limiting rate of incoming requests 2-173
log buffer
clearing status 2-41
displaying status 2-789
setting
per-port configurable trust state 2-177
trust state
setting 2-177
IPC
displaying cache flow entries 2-794
IP fast-switching cache, displaying contents 2-834
IPG
returning to default mode 2-169
setting mode 2-169
IP IGMP
IP multicast 2-281
allocating circular buffer storage 2-273
allowing
routing between broadcast-only internetworks 2-275
Bidir
clearing entries 2-69
configuring
administratively scoped boundary 2-271
deleting
group 2-70
disabling
load splitting across multiple paths 2-278
routing 2-281
enabling
load splitting across multiple paths 2-278
filtering
multicast router information request packets 2-277
filtering auto RP messages 2-271
limiting number of routes added to table 2-280
removing
administratively scoped boundary 2-271
circular buffer 2-273
routing
displaying routing table 2-840, 2-845
displaying snooping information 2-825
statistic counters
resetting 2-71
IP multicast routing
MRM
UDP port numbers 2-1265
mroute, configuring 2-247
packet headers, storing 2-273, 2-839
PIM
neighbors, displaying 2-865
shortest path tree, delaying use 2-304
RP
address, configuring 2-286
Auto-RP, groups covered 2-296, 2-297
Auto-RP, mapping agent 2-299
filter RP announcements 2-294
PIM Version 2 candidate, advertising 2-295
IP output queue
limiting size 2-151
restoring default size 2-151
ip pim snooping sgr-prune command 2-303
IP processing
disabling 2-314
enabling 2-314
IP-routing protocols
configuring maximum number of parallel routes 2-390
IP shortcuts to MSFC
disabling 2-531
enabling 2-531
IPv4
clearing
software-installed entries 2-73
configuring
multicast rate limiters 2-516
disabling
multicast rate limiters 2-516
displaying
FIB TCAM exceptions 2-721
information 2-952
IPv6
ACLs
displaying hardware NetFlow IPv6 configuration 2-979
displaying NetFlow entries for reflexive ACLs 2-969
enabling compression mode 2-443
clearing
per-prefix accounting statistics 2-68
software-installed entries 2-73
configuring
multicast rate limiters 2-518
NDE flow mask 2-411
disabling
CEF-based multicast forwarding 2-316
compression mode 2-443
denial of packets from source loopback address 2-445
denial of packets from source multicast address 2-445
hardware assist 2-316
multicast rate limiters 2-518
displaying
ACL entries 2-1099
DSS IP range invalidation profile 2-708
DSS IPv6 range invalidation profile 2-708
exact route for 2-937
FIB TCAM exceptions 2-721
hardware NetFlow IPv6 configuration 2-979
MFIB information 2-878
microflow policing information 2-979
MLS IP information 2-952
MLS QoS information 2-982
multicast entries 2-937
multicast hardware shortcut count 2-1045
multicast shared adjacencies 2-1045
multicast subnet/connected hardware entries 2-1045
NetFlow entries 2-969
NetFlow hardware configuration 2-969
per-prefix accounting statistics 2-937
platform software multicast information 2-1045
switching table entry information 2-937
enabling
CEF-based multicast forwarding 2-316
compression mode 2-443
denial of packets from source loopback address 2-445
denial of packets from source multicast address 2-445
hardware assist 2-316
hardware assist
enabling 2-316
MLDv2 snooping
displaying explicit-tracking information 2-884
displaying multicast router interfaces 2-884
displaying report-suppression status 2-884
displaying statistics information 2-884
per-prefix accounting
display statistics 2-937
preventing
installation of ACL entry 2-317
installation of multicast connected entry 2-317
IPv6 hardware configuration information 2-979
IPv6 snooping
IPX (Internet Packet Exchange)
access lists, time ranges 2-1245
IPX MLS
clearing entries 2-73
IPX shortcuts to MSFC
disabling 2-533
enabling 2-533
IS-IS
configuring network entity title 2-579
ISL
encapsulation
disabling 2-133
enabling 2-133
ISL VLANs
mapping to 802.1Q VLANs 2-1294
J
jumbo frames
default value 2-574
restoring default value 2-574
setting maximum packet size 2-574
setting maximum transmission unit size 2-574
L
LACP
configuring
maximum port per bundle on port channel 2-347
configuring interface 2-22
deselecting channeling protocol 2-25
displaying
internal information 2-890
neighbor information 2-890
protocol setting 2-725
statistical information 2-890
system identification 2-890
setting
channeling protocol 2-25
ingress packet rate 2-349
port priority 2-348
system priority 2-350
last member query interval
configuring for IGMP 2-224
configuring for IGMP snooping 2-233
configuring for MLDv2 snooping 2-321
Layer 2
configuring port as a multicast router port 2-236
interface type
resetting 2-1213
setting 2-1213
Layer 2 classification of IP packets
configuring 2-382
disabling 2-384
enabling 2-384
Layer 3
manager
displaying information 2-888
Link Aggregation Control Protocol
link debounce timer
configuring 2-353
disabling 2-353
displaying debounce timer configuration 2-763
enabling 2-353
link-status event messages
disabling
globally 2-357
on an interface 2-359
on a subinterface 2-360
on system initialization 2-357
enabling
globally 2-357
on an interface 2-359
on a subinterface 2-360
on system initialization 2-357
link type
configuring 2-1158
load balancing
selecting
Catalyst 6500 series switch load-balancing algorithm 2-415
Cisco IOS load-balancing algorithm 2-415
load-balancing algorithm
selecting 2-188
load statistics interval 2-355
logging 2-362
controlling IP ARP packets 2-181
logical virtual ports
displaying number required 2-1130
longest prefix match functionality 2-926, 2-941
loop guard
disabling 2-1157
enabling 2-1157
M
MAC ACL filtering
disabling VLAN field 2-384
enabling VLAN field 2-384
MAC ACL QoS filtering
classifying Layer 3 packets as Layer 2 packets 2-382
configuring
ARP ACL 2-5
deleting
ARP ACL 2-5
MAC addresses
counters
displaying multicast addresses 2-895
enabling
MAC limit globally 2-373
MAC limit per interface 2-373
MAC limit per port 2-373
MAC limit per VLAN 2-373
sticky MAC 2-1218
removing
sticky MAC 2-1218
MAC address filtering
configuring 2-378
disabling 2-378
enabling 2-378
MAC address learning
disabling 2-371
displaying state 2-901
enabling 2-371
MAC address table
configuring
mac-out-of-band synchronization 2-381
MAC address tables
adding static entries 2-378
clearing dynamic entries 2-63
clearing static entries 2-63
configuring
aging time 2-369
RM purging time 2-369
deleting secure or specific addresses 2-86
disabling
CAM table usage monitoring notification 2-376
IGMP snooping on static MAC addresses 2-378
MAC address learning 2-371
MAC move notification 2-375
displaying
aging time 2-895
DFC-specific information 2-895
dynamic table entries 2-895
entry count 2-895
information 2-895
interface-specific information 2-895
MAC address learning state 2-901
MAC move notification 2-895
multicast table entries only 2-895
number of manually configured entries 2-895
static table entries only 2-895
VLAN-specific information 2-895
enabling
CAM table usage monitoring notification 2-376
MAC address learning 2-371
MAC move notification 2-375
removing static entries 2-378
MAC limit
disabling 2-373
enabling 2-373
MAC move notification
disabling 2-375
enabling 2-375
mac-out-of-band synchronization
configuring 2-381
macro
creating an interface-range macro 2-101
maintenance loop signaling entity
Maintenance Operation Protocol
mapping
802.1Q VLANs to ISL VLANs 2-1294
accessing
QoS policy map configuration mode 2-600
configuring
DSCP mutation map 2-477
egress DSCP-to-CoS mapping 2-474
egress DSCP-to-DSCP mapping 2-477
egress DSCP-to-EXP mapping 2-476
egress EXP-to-EXP mapping 2-480
EXP mutation map 2-480
ingress-EXP-to-DSCP mapping 2-479
ingress IP precedence-to-DSCP mapping 2-482
policed DSCP values to marked-down DSCP value mapping 2-484
QoS class maps 2-26
QoS policy map 2-600
creating VLAN access map 2-1284
defining
CoS to CoS map 2-472
deleting
CoS-to-DSCP mapping 2-471
egress DSCP-to-CoS mapping 2-474
egress DSCP-to-DSCP mapping 2-477
egress DSCP-to-EXP mapping 2-476
egress EXP-to-EXP mapping 2-480
ingress-EXP-to-DSCP mapping 2-479
ingress IP precedence-to-DSCP mapping 2-482
policed DSCP values to marked-down DSCP value mapping 2-484
QoS class maps 2-26
QoS policy map 2-600
displaying
class map information 2-689
information 2-769
policy map information 2-1053
policy map interface information 2-1057
entering VLAN access-map command mode 2-1284
removing VLAN access map 2-1284
match subcommand
accessing 2-26
maximum NetFlow table allocation
configuring 2-456
maximum routes
displaying configuration 2-942
maximum transmission unit
MD5 signature
computing 2-1273
MDIX
disabling 2-391
enabling 2-391
MDS
disabling
IP multicast routing 2-281
displaying
interface information 2-836
enabling
IP multicast routing 2-281
MDSS
Multicast Distributed Shortcut Switching
MDT
configuring
default group 2-394
group address ranges 2-393
disabling
recording of data MDT reuse 2-395
displaying
advertisements sent 2-864
data reuse information 2-861
default group information 2-860
detailed BGP advertisement information 2-860
hardware accelerated information 2-956
received advertisements 2-862
enabling
recording of data MDT reuse 2-395
Media Access Control
media dependent interface with crossover detection
message digest 5
message-of-the-day
MFIB
displaying entries and interfaces 2-878
mGRE
configuring
mobility 2-545
wireless mGRE tunnels 2-545
specifying
convert NBMA to BMA 2-545
network ID 2-545
MIB
displaying SNMP interface index identification numbers 2-1080
microflow policers
defining
flow mask type 2-595
microflow policing for bridged traffic
enabling 2-464
removing 2-464
microflow policing statistics, displaying 2-972
minimum links
setting 2-609
MLDv2
disabling
proxy reporting 2-319
displaying
explicit-tracking information 2-884
MAC-address table information 2-895
multicast router interfaces 2-884
report-suppression status 2-884
statistics information 2-884
MLDv2 snooping
configuring
Layer 2 port as a multicast router port 2-325
configuring last member query interval 2-321
disabling
explicit tracking 2-319
globally 2-318
report suppression 2-327
snooping querier 2-326
displaying
explicit tracking database 2-884
enabling
explicit tracking 2-319
globally 2-318
report suppression 2-327
snooping querier 2-326
limiting size of explicit tracking database 2-323
MLS
CEF
displaying CEF table information 2-949
displaying information for specific VRF 2-949
clearing
statistical information 2-78
statistical information (deprecated) 2-79
configuring
fast-aging time 2-402
long-aging time 2-403
normal-aging time 2-404
port-security rate limiters 2-514
rate limiters 2-514
defining
exception priority 2-408
directed broadcasts
displaying information 2-914
disabling
Layer 2 protocol-tunneling rate limiters 2-514
rate limiters 2-514
disabling directed broadcast 2-422
displaying
ACL merge method 2-743
aggregate count of all missed flows 2-1000
ASIC version 2-907
exception priority 2-920
last reading of corresponding registers 2-1000
packet error information 2-998
statistical information 2-998
statistics data export information 2-992
enabling
directed broadcast 2-422
NetFlow interface-based entry feature 2-455
NetFlow protocol-based entry feature 2-455
PDU rate limiters 2-514
rate limiters 2-514
exception priority
defining 2-408
displaying information 2-920
interface
assigning a VLAN ID 2-537
removing a management interface 2-535
removing a VLAN ID 2-537
specifying a management interface 2-535
NDE
clearing counters 2-72
disabling population of additional fields 2-452
displaying status and configuration information 2-992
enabling export feature 2-454
enabling population of additional fields 2-452
removing address 2-536
removing filter options 2-450
specifying address 2-536
specifying filter options 2-450
permitting traffic 2-424
QoS
disabling ToS to DSCP rewrite 2-495
enabling ToS to DSCP rewrite 2-495
ToS to DSCP rewrite 2-495
QoS statistics data export
aggregate policer 2-500
class map 2-502
delimiter 2-504
destination address 2-505
disabling globally 2-497
enabling globally 2-497
interval 2-507
per-port disabling 2-498
per-port enabling 2-498
rate limiters
displaying information 2-994
enabling 2-525
enabling CEF rate limiters 2-523
enabling for ACL-bridged rate limiters 2-521
enabling for Layer 3 security rate limiters 2-528
enabling for unicast and multicast packets 2-513
enabling for VACL-log cases 2-529
setting 2-513
setting CEF rate limiters 2-523
setting for ACL-bridged rate limiters 2-521
setting for Layer 3 security rate limiters 2-528
setting for unicast packets 2-525
setting for VACL-log cases 2-529
removing excluded protocol port 2-410
restoring flow mask 2-411
selecting ACL merge method 2-398
specifying excluded protocol port 2-410
specifying flow mask 2-411
TCL
displaying information 2-1000
VLAN
displaying statistical information 2-1010
VTP domain
linking 2-538
removing 2-538
MLS CEF
displaying
consistency checker information 2-924
MLS IP
clearing
entries 2-73
software-installed entries 2-73
configuring
OAL globally 2-362
OAL on an interface 2-364
deleting
ACL threshold 2-421
disabling
ACL logical operations expansion on Layer 4 ports 2-413
egress replication mode 2-435
ingress replication mode 2-435
OAL globally 2-362
OAL on an interface 2-364
shortcuts in TCAM 2-442
displaying
information 2-952
mode information 2-956
multicast replication capabilities 2-956
NetFlow routing entries 2-964
OAL-cache entries 2-893
OAL configuration information 2-893
PIM group to active rendezvous point mappings 2-960
software-installed non-static entry information 2-963
software-installed static entry information 2-966
statistical information for NetFlow entries 2-967
enabling
ACL logical operations expansion on Layer 4 ports 2-413
egress replication mode 2-435
ingress replication mode 2-435
OAL globally 2-362
OAL on an interface 2-364
shortcuts in TCAM 2-442
global
configuring Bidir RP RPF scan interval 2-429
configuring threshold 2-439
disabling 2-426
disabling consistency checker 2-432
disabling subnet download 2-430
disabling support for policy-routed packets 2-441
enabling 2-426
enabling consistency checker 2-432
enabling subnet download 2-430
enabling support for policy-routed packets 2-441
installing
ACL threshold 2-425
interface
disabling external switches 2-532
disabling internal router 2-412
disabling shortcuts 2-428
enabling external switches 2-532
enabling internal router 2-412
enabling non-RPF multicast fastdrop 2-437
enabling shortcuts 2-428
IP shortcuts to MSFC
disabling 2-531
enabling 2-531
multicast
enabling egress capability 2-426
reflexive NDR
disabling shortcuts in TCAM 2-442
enabling shortcuts in TCAM 2-442
replication mode
disabling egress mode 2-435
disabling ingress mode 2-435
enabling egress mode 2-435
enabling ingress mode 2-435
MLS IPX
interface
disabling external switches 2-534
enabling external switches 2-534
IPX shortcuts to MSFC
disabling 2-533
enabling 2-533
MLS per-prefix accounting
disabling 2-414
enabling 2-414
MLS QoS
aggregate policer
clearing statistics and token counts in high-rate and low-rate policer buckets 2-76
defining 2-462
removing 2-462
attaching
CoS mutation map to interface 2-467
DSCP mutation map to interface 2-468
EXP mutation map to interface 2-469
attaching a policy map to an interface 2-657
clearing statistics and token counts in high-rate and low-rate policer buckets 2-76
default CoS value
defining 2-466
removing 2-466
defining
ingress-EXP-to-DSCP mapping 2-479
disabling
policer traffic class identification 2-487
policing ACL-redirected packets 2-489
port attribute checks on EtherChannel bundling 2-465
port queueing mode 2-493
port-trust ignore 2-486
displaying
information 2-982
IPv6 information 2-982
map configuration information 2-987
MPLS interface summary 2-989
number of free aggregate RAM indexes on the switch processor and the DFCs 2-986
runtime version information 2-987
DSCP mutation mapping
defining 2-477
removing 2-477
egress DSCP-to-CoS mapping
defining 2-474
deleting 2-474
egress DSCP-to-EXP mapping
defining 2-476
deleting 2-476
enabling
policer traffic class identification 2-487
policing ACL-redirected packets 2-489
port attribute checks on EtherChannel bundling 2-465
port queueing mode 2-493
port-trust ignore 2-486
EXP mutation mapping
defining 2-480
removing 2-480
extended trust
configuring trust mode 2-510
displaying trust mode 2-1069
global
disabling 2-459
disabling PFC QoS and enabling port queueing 2-459
enabling 2-459
ingress CoS-to-DSCP mapping
defining 2-471
removing 2-471
ingress-EXP-to-DSCP mapping
defining 2-479
deleting 2-479
ingress IP precedence-to-DSCP mapping
defining 2-482
removing 2-482
interface
changing to untrusted port state 2-488, 2-508
disabling 2-461
enabling 2-461
setting trusted port state 2-488, 2-508
mapping
defining CoS to CoS map 2-472
microflow policing for bridged traffic
enabling 2-464
removing 2-464
MPLS
displaying interface summary 2-989
policed in-profile DSCP mapping
defining 2-484
removing 2-484
policing
ACL-redirected packets 2-489
policy-map configuration mode
accessing 2-600
exiting 2-600
removing
CoS mutation map from interface 2-467
DSCP mutation map from interface 2-468
EXP mutation map from interface 2-469
removing a policy map from an interface 2-657
VLAN switch port
disabling 2-512
enabling 2-512
MLS QoS policy maps
class option description, table 2-595, 2-601
configuring 2-600
MMLS
displaying
explicit tracking information 2-1002
information 2-1003
mobility 2-545
modes
modules
disabling
oversubscription mode 2-155
displaying
provisioning information 2-1010
status information 2-1010
version information 2-1010
enabling
oversubscription mode 2-155
power cycling 2-156
powering down 2-611
powering on 2-611
shutdown NAM 2-157
shutdown SSL 2-157
specifying
boot options 2-153
MOP (Maintenance Operation Protocol)
server
booting automatically 2-15
more commands
filter 1-7
search 1-7
--More-- prompt 1-7
filter 1-7
search 1-7
MPLS
clearing
software-installed entries 2-73
configuring
burst duration for GB-TE flows 2-448
global parameters 2-448
configuring DSCP map for GB-TE flows 2-448
defining
DSCP-to-EXP mapping 2-476
deleting
DSCP-to-EXP map 2-476
disabling
aggregated label recirculation 2-448
recirculation 2-446
tag-to-tag load balancing 2-572
tunnel recirculation 2-448
disabling routing 2-570
displaying
control plane statistics 2-1022
FIB TCAM exceptions 2-721
information 2-952
interface summary 2-989
IoMPLS enabled interface information 2-1022
platform-specific information 2-1022
shared code between LAN and WAN 2-1022
state of currently routed VCs 2-1018
VPN to VLAN mapping table 2-1022
enabling
aggregated label recirculation 2-448
recirculation 2-446
tag-to-tag load balancing 2-572
tunnel recirculation 2-448
enabling routing 2-570
load distribution method
resetting to defaults 2-607
setting 2-607
setting
experimental value 2-667
redundancy mode 2-547
trusted state on Layer 2 WAN interface 2-668
specifying
use optimized MPLS tagging 2-573
use standard MPLS tagging 2-573
tagging
specify using optimized tagging 2-573
specify using standard tagging 2-573
tag switching
disabling load balancing 2-572
displaying table information 2-1025
enabling load balancing 2-572
MPLS EXP
MPLS experimental field
mroute
configuring
static route 2-247
MSDP
adding
descriptive text to configuration 2-254
bringing up the peer 2-269
clearing
SA-cache entries 2-55
statistics counters 2-56
TCP connection to the MSDP peer 2-54
configuring
entries advertised in SA messages 2-261
for PIM sparse mode region 2-249
incoming filter list 2-263
originator identification 2-258
outgoing filter list 2-265
peers 2-259
peer to mesh group 2-257
router to send SA request messages 2-267
router to send SA requests 2-255
creating
SA state 2-251
defining
default peer 2-252
displaying
number of sources and groups 2-847
peer information 2-849
states learned from MSDP peers 2-851
displaying peer status 2-853
enabling
administrative shut down of peer 2-269
limiting
multicast data packets 2-270
removing
incoming filter list 2-263
outgoing filter list 2-265
peers 2-259
removing peer from mesh group 2-257
MSFC
displaying
standby MSFC2 DRAM 2-678
programing new ROMMON into Flash 2-1270
setting execution preference 2-1270
MST
configuration submode command
instance 2-159
name 2-576
revision 2-647
show 2-669
configuring
forward delay 2-1165
hello-time 2-1166
max-age 2-1167
max-hops 2-1168
port to transmit prestandard BPDUs 2-1169
root as primary 2-1171
root as secondary 2-1171
displaying
current configuration 2-669
MST protocol information 2-1088
MST region configuration information 2-1088
pending configuration 2-669
entering configuration submode 2-1163
instance
mapping VLANs 2-159
mapping
PVLANs to instance 2-623
VLANs 2-159
restarting protocol migration 2-88
setting
configuration revision number 2-647
MST region name 2-576
path cost for instances 2-1161
port priority for instances 2-1161
switching to PVST mode 2-1160
MTU
default values 2-574
displaying global MTU settings 2-1096
displaying system MTU setting 2-1096
restoring default value 2-574
setting
maximum Layer 2 payload size 2-1239
maximum Layer 3 payload size 2-1239
maximum packet size 2-574
maximum size 2-574
multicast distributed switching
multicast distribution tree
multicast forwarding information base
multicast router
displaying routing table 2-840, 2-845
displaying snooping information 2-825
multicast SSO
configuring
leak interval 2-436
leak percentage 2-436
configuring convergence timer 2-436
displaying
information 2-961
statistical information 2-961
multicast static route
Multilayer Switching
multiple-character patterns 1-9
multiple NetFlow export destinations, configuring 2-211
multiple path unicast RPF check
configuring
modes 2-420
creating
interface group 2-419
deleting
interface group 2-419
interface group
creating 2-419
defining 2-419
deleting 2-419
RPF mode
interface-group 2-420
pass 2-420
punt 2-420
Multiple Spanning Tree
multipoint generic routing encapsulation
Multiprotocol Label Switching
mVPN
adding
descriptive text to MSDP configuration 2-254
allocating circular buffer storage 2-273
bringing up the MSDP peer 2-269
clearing
SA-cache entries 2-55
statistics counters 2-56
TCP connection to the MSDP peer 2-54
configuring
advertising to the BSR 2-295
BSR candidacy 2-290
default group 2-394
entries advertised in SA messages 2-261
incoming filter list 2-263
originator identification 2-258
outgoing filter list 2-265
peers 2-259
peer to mesh group 2-257
PIM message acceptance 2-286
PIM sparse mode region for MSDP 2-249
register source 2-293
rendezvous point mapping agent 2-299
router to send SA request messages 2-267
router to send SA requests 2-255
shortest path tree, delaying use 2-304
using Auto-RP 2-297
creating
SA state 2-251
defining
default peer 2-252
SSM range of IP multicast addresses 2-305
deleting
Auto-RP cache entries 2-57
entries from IGMP-group cache 2-49
entries from IP multicast routing table 2-52
disabling
bidir-PIM 2-288
IP multicast routing 2-281
load splitting across multiple paths 2-278
SSM range of IP multicast addresses 2-305
displaying
BSR information 2-857
cached rendezvous points 2-869
contents of circular cache-header buffer 2-838
contents of IP fast-switching cache 2-834
data MDT reuse information 2-861
designated forwarder interface information 2-859
detailed BGP advertisement information 2-860
discovered neighbors 2-865
MDS interface information 2-836
MDT advertisement sent 2-864
MSDP peer status 2-853
number of sources and groups 2-847
peer information 2-849
received MDT advertisements 2-862
rendezvous points for a group 2-867
states learned from MSDP peers 2-851
triggered RPF check events 2-875
enabling
administrative shut down of peer 2-269
bidir-PIM 2-288
IP multicast routing 2-281
load splitting across multiple paths 2-278
filtering
Auto-RP messages 2-294
multicast router information request packets 2-277
filtering PIM register messages 2-285
limiting
multicast data packets 2-270
limiting number of routes added to table 2-280
removing
Auto-RP message filter 2-294
circular buffer 2-273
incoming filter list 2-263
outgoing filter list 2-265
peers 2-259
removing peer from mesh group 2-257
setting
register message limit 2-292
N
NDE
clearing
counters 2-72
disabling
population of additional fields 2-452
sampled NetFlow on an interface 2-457
displaying
aging information 2-969
hardware status 2-969
sampled NetFlow status 2-997
status and configuration information 2-992
status information 2-968
enabling
export feature 2-454
population of additional fields 2-452
sampled NetFlow on an interface 2-457
filter options
removing 2-450
specifying 2-450
removing address 2-536
sampled NetFlow
disabling on an interface 2-457
enabling on an interface 2-457
specifying sampling method 2-539
specifying address 2-536
NDE interface export
flow masks 2-450
specifying filter options 2-450
NET
configuring 2-579
NetFlow
aggregation
configuring specific aggregation caches 2-206
displaying cache flow entries 2-794
clearing counters 2-37
configuring
aggregation caches—specific 2-206
maximum flow allocation 2-456
multiple export destination 2-211
disabling
globally for bridged flows 2-220
inbound NDE for bridged flows 2-219
interface-based NDE 2-214
multicast ingress accounting 2-279
NDE for hardware-switched flows 2-210
sampled NetFlow globally 2-539
displaying 2-979
aging information 2-969
cache flow entries 2-794
detailed statistics summary 2-798
fragment offset information 2-798
hardware status 2-969
IP flow information 2-972
IP flow mask 2-969
IP information 2-969
microflow policing statistics 2-972
software-installed non-static entry information 2-977
statistical information 2-952
switched packet counts 2-998
table information 2-952
enabling
globally for bridged flows 2-220
inbound NDE for bridged flows 2-219
interface-based entry creation 2-455
interface-based NDE 2-214
multicast ingress accounting 2-279
NDE for hardware-switched flows 2-210
protocol-based entry creation 2-455
sampled NetFlow globally 2-539
switching 2-309
hardware switching
disabling interface-based entry creation 2-455
disabling protocol-based entry creation 2-455
displaying CEF table information 2-807
enabling interface-based entry creation 2-455
enabling protocol-based entry creation 2-455
incorporating bridged/IntraVLAN traffic 2-464
interface
specifying source interface 2-215
interface-based NDE
disabling 2-214
enabling 2-214
IPv6
displaying hardware configuration information 2-979
monitoring
NetFlow table usage on switch processor 2-458
software switching
displaying information 2-817
specifying
export flow version on Supervisor Engine720 2-217
hardware-switched flow NDE version 2-213
switching
clearing statistics 2-48
displaying cache flow entries 2-794
exporting cache entries 2-211
setting cache size 2-208
specifying source interface 2-215
table usage on switch processor
monitoring 2-458
NetFlow Data Export
net processor
displaying
counter information 2-1038
network entity title
next-hop
displaying CEF VLAN information 2-808
Next Hop Resolution Protocol
NHRP
displaying
cache 2-854
nodal NSF, configuring 2-652
no form of a command, using 1-7
non-RPF multicast fastdrop
enabling 2-437
non-stop forwarding
non-XL mode
definition
support modules 2-406
NSF
cancelling OSPF restart 2-581
disabling 2-581
BGP routing process 2-654
EIGRP routing process 2-654
IS-IS routing process 2-654
OSPF routing process 2-654
enabling
BGP routing process 2-654
EIGRP routing process 2-654
IS-IS routing process 2-654
OSPF routing process 2-654
specifying
Cisco proprietary IS-IS method 2-581
failover interval 2-581
IETF IS-IS method 2-581
IS-IS database synchronization wait time 2-581
route processor stabilizer interval 2-581
O
OAL
clearing entries 2-62
configuring
global 2-362
interface 2-364
displaying
cache entries 2-893
configuration information 2-893
ODM
selecting ACL merge method 2-398
ondemand diagnostics
configuring 2-111
execution action for test failure 2-111
online diagnostics
bypassing boot-up diagnostic testing 2-103
configuring
execution action for test failure 2-111
health monitoring diagnostic tests 2-108
ondemand diagnostics 2-111
disabling
publishing to CNS event bus 2-105
subscription to CNS diagnostic events 2-105
displaying
CNS subject 2-698
configured boot-up coverage level 2-693
current scheduled tasks 2-693
event logs 2-693
sanity check results 2-699
supported test suites 2-693
test ID 2-693
test results 2-693
test statistics 2-693
enabling
publishing to CNS event bus 2-105
scheduling 2-112
subscription to CNS diagnostic events 2-105
syslog messages 2-108
global configuration mode
clearing health monitoring diagnostic test schedule 2-108
clearing schedule 2-103
clearing test-based testing schedule 2-112
setting boot-up diagnostic level 2-103
setting health monitoring diagnostic testing 2-108
setting test-based testing 2-112
setting up health monitoring diagnostic test schedule 2-108
setting up schedule 2-103
setting up test-based testing 2-112
removing
scheduling 2-112
returning to default setting 2-103
scheduled switchover
disabling 2-112
enabling 2-112
setting
testing level 2-103
test interval 2-112
specifying
health monitoring diagnostic tests 2-108
optimized ACL logging
order-dependent merge algorithm
OSPF
specifying
minimum percentage of CPU process time 2-624
P
packet buffer errors
displaying status 2-722, 2-723
enabling error detection 2-136
packet count, displaying 2-760
packet error information, displaying 2-998
paging prompt
PAgP
clearing information 2-80
configuring interface 2-22
deselecting channeling protocol 2-25
displaying
protocol information 2-725
hot standby mode
returning to defaults 2-585
selecting ports 2-585
input interface of incoming packets
learning 2-584
returning to defaults 2-584
port channels
displaying information 2-1026
setting
channeling protocol 2-25
passwords
establishing enhanced password security 2-1272
setting username 2-1272
pathcost
setting STP default pathcost calculation method 2-1173
PBR
disabling 2-441
enabling 2-441
hardware support for null0 route maps
per-prefix accounting
disabling 2-414
enabling 2-414
per VLAN learning A-7
per-VLAN spanning tree
PIM
clearing
global statistical information 2-58
statistical VLAN information 2-59
configuring
advertising to the BSR 2-295
BSR candidacy 2-290
message acceptance 2-286
PIM sparse mode region for MSDP 2-249
register source 2-293
rendezvous point mapping agent 2-299
shortest path tree, delaying use 2-304
using Auto-RP 2-297
defining
SSM range of IP multicast addresses 2-305
deleting
Auto-RP cache entries 2-57
disabling
bidir-PIM 2-288
flooding of packets to designated router 2-302
processing and forwarding of PIM dense mode state refresh control messages 2-306
SGR-prune suppression 2-303
snooping globally 2-300
snooping on an interface 2-301
SSM range of IP multicast addresses 2-305
triggered RPF check 2-282
displaying
BSR information 2-857
cached rendezvous points 2-869
data MDT reuse information 2-861
designated forwarder interface information 2-859
detailed BGP advertisement information 2-860
discovered neighbors 2-865
IP multicast routing table information 2-845
MDT advertisement sent 2-864
PIM group to active rendezvous point mappings 2-960
received MDT advertisements 2-862
rendezvous points for a group 2-867
snooping information 2-871
triggered RPF check events 2-875
enabling
bidir-PIM 2-288
flooding of packets to designated router 2-302
processing and forwarding of PIM dense mode state refresh control messages 2-306
SGR-prune suppression 2-303
snooping globally 2-300
snooping on an interface 2-301
filtering
Auto-RP messages 2-294
filtering register messages 2-285
removing
Auto-RP message filter 2-294
setting
back-off interval 2-282
check interval 2-284
register message limit 2-292
triggered check interval 2-282
snooping
clearing global statistical information 2-58
clearing statistical VLAN information 2-59
disabling globally 2-300
disabling on an interface 2-301
enabling globally 2-300
enabling on an interface 2-301
pipe symbol
specifying alternative patterns 1-10
PIR
PISA
displaying
counter information 2-1038
pisa
displaying
split-VLANs 2-1052
platform
clearing
interrupt throttling counters 2-81
displaying
CPU EEPROM information 2-1028
fault data 2-1028
interrupt throttling information 2-1028
IP multicast-related information 2-1028
MSFC information 2-1028
net interrupt information 2-1028
processor TLB register information 2-1028
platforms
displaying
buffer allocation information 2-1028
hardware resources 2-1032
point-to-point link type
configuring 2-1158
policer
policers
defining
flow mask type 2-595
microflow policers 2-595
microflow
defining 2-595
removing 2-595
removing
microflow policers 2-595
removing aggregate policer from current class 2-595
specifying
aggregate policer for current class 2-595
policy-based routing
policy maps
clearing marking configuration 2-663
displaying information 2-1053
displaying per-interface information 2-1057
marking matched traffic with DSCP value 2-663
marking matched traffic with IP precedence value 2-665
port access maps
creating 2-603
deleting 2-603
port channels
accessing 2-164
clearing information 2-80
creating 2-164
displaying
channel group information 2-1026
counter information 2-760
interface capabilities 2-757
load distribution method
resetting to default 2-610
resetting to defaults for bundled ports 2-605
setting for bundled ports 2-605
setting for specific modules 2-605
setting on a per-module basis 2-610
setting
load distribution method for MPLS packets 2-607
minimum links 2-609
port-clocking mode
active mode 2-92
automatic mode 2-92
enabling 2-92
passive mode 2-92
portName MIB objects
configuring 2-1190
port permit list
displaying destination list 2-1013
port ranges
executing 2-166
port security
configuring 2-138
aging time 2-1216
aging type 2-1216
deleting secure or specific addresses 2-86
disabling 2-1215
displaying setting information 2-1059
enabling 2-1215
removing
MAC address from list 2-1218
setting
maximum number of secured addresses 2-1220
violation action 2-1222
violation actions 2-1222
port speeds
configuring 2-1186
default 2-1186
port-trust ignore
disabling 2-486
enabling 2-486
power cycling modules 2-156
powering down empty slots 2-611
power redundancy mode
setting 2-614
power status
displaying 2-1061
power supplies
displaying
product number 2-749
serial number 2-749
type 2-749
setting power redundancy mode 2-614
private VLANs
privileged EXEC mode, summary 1-6
Programmable Intelligent Services Accelerator
promiscuous ports
setting mode 2-1213
prompts
system 1-6
Protocol Independent Multicast
protocol tunneling
disabling interfaces 2-338
displaying protocols 2-886
enabling interfaces 2-338
setting
CoS value 2-340
drop threshold globally 2-343
drop threshold on an interface 2-341
specifying maximum processed protocol packets 2-344
protocol tunneling links
converting PVST+ and 802.1d BPDUs 2-18
proxy reporting
enabling
turned on by default 2-227, 2-319
psecure
PVL
disabling 2-371
enabling 2-371
PVLANs 2-1125
defining association 2-1224
deleting association 2-1224
disabling
global sticky ARP 2-311
per-interface sticky ARP 2-313
displaying
configuration information 2-773, 2-775
currently configured information 2-1125, 2-1130
mapping information 2-769
enabling
global sticky ARP 2-311
per-interface sticky ARP 2-313
mapping
for promiscuous port 2-1225
primary and secondary VLAN 2-621
to an instance 2-623
setting
host ports 2-1213
interface type 2-1213
promiscuous mode 2-1213
VLAN interface configuration mode
mapping 2-621
primary and secondary VLAN mapping 2-621
removing mappings 2-621
VLAN submode
adding VLANs 2-618
configuring association 2-618
designating VLANs 2-618
removing VLANs 2-618
PVST
switching to MST mode 2-1160
PVST+ BPDU and 802.1d BPDU conversion over protocol tunneling links 2-18
PVST and PVST+ interoperability
ignore-bpdu-pid keyword 2-18
L2PT topologies 2-19
Q
QDM
disconnecting a session 2-118
displaying
client ID 2-1065
information and status about currently active QDM clients 2-1065
QinQ
creating
link bundle (port-channel) virtual interface 2-164
disabling
double-tagged VLAN translation
enabling
double-tagged VLAN translation
IEEE 802.1Q in 802.1Q
removing
link bundle (port-channel) virtual interface 2-164
setting
prioritization bits 2-661
QM
displaying switch processor information 2-1066
QoS
accessing
class map configuration mode 2-26
avoidance of routing protocol packet policing 2-490
class map
displaying information 2-689
clearing FM NetFlow counters 2-37
clearing global interface counters 2-35
configuring
class maps 2-26
queueing mode 2-494
time-based ACLs 2-1245
control of routing protocol packet policing 2-490
defining
marking 2-490
displaying
protocol 2-991
enabling
time-based ACLs 2-1245
intelligent traffic redirect 2-587
manager
displaying information 2-1066
policy maps
clearing marking configuration 2-663
displaying information 2-1053
displaying per-interface information 2-1057
marking matched traffic with DSCP value 2-663
marking matched traffic with IP precedence value 2-665
queueing mode 2-494
rcv-queue ratio limit
setting 2-630
removing
ACL time-range limitation 2-1245
transmit-queue size ratio
setting 2-1303
QoS Device Manager
QoS filtering
enabling
DSCP-based egress 2-590
IP precedence based 2-590
QoS statistics data export
See MLS QoS statistics data export
question command 1-2
queueing
displaying information 2-1069
R
rapid per-VLAN spanning tree
rapid PVST
disabling 2-1160
enabling 2-1160
Rapid Spanning Tree Protocol
Rapid Spanning Tree Protocol+
rate limiters
configuring
IPv4 multicast rate limiters 2-516
IPv6 multicast rate limiters 2-518
Layer 2 protocol-tunneling rate limiters 2-514
PDU rate limiters 2-514
port-security rate limiters 2-514
disabling
CEF rate limiters 2-523
IPv4 multicast rate limiters 2-516
IPv6 multicast rate limiters 2-518
Layer 2 protocol-tunneling rate limiters 2-514
Layer 3 security rate limiters for unicast packets 2-528
PDU rate limiters 2-514
port-security rate limiters 2-514
disabling for ACL-bridged rate limiters 2-521
disabling for unicast and multicast packets 2-513
disabling for unicast packets 2-525
disabling for VACL-log cases 2-529
enabling
Layer 2 protocol-tunneling rate limiters 2-514
Layer 3 security rate limiters for unicast packets 2-528
PDU rate limiters 2-514
port-security rate limiters 2-514
enabling for ACL-bridged rate limiters 2-521
enabling for unicast and multicast packets 2-513
enabling for unicast packets 2-525
enabling for VACL-log cases 2-529
MLS
Layer 2 port-security information 2-994
MLS unicast
displaying information 2-994
multicast
displaying information 2-994
setting
Layer 3 security rate limiters for unicast packets 2-528
setting for ACL-bridged rate limiters 2-521
setting for CEF rate limiters 2-523
setting for unicast packets 2-513, 2-525
setting for VACL-log cases 2-529
rate limits
disabling rate limiting 2-417
enabling rate limiting 2-417
setting 2-417
rcv-queues
mapping CoS values 2-628
returning to default values 2-631
setting drop threshold 2-633
setting ratio limit 2-630
specifying maximum threshold 2-631
real servers
changing active connections 2-388
limiting active connections 2-388
new connections
defining defaults 2-635
defining number of SYNs 2-635
reboots
restoring bindings across 2-195
receive queues
receiving back channel
configuring 2-1256
removing 2-1256
recovering a file 2-1266
redundancy
displaying
information 2-1071
RF client list 2-1071
RF operational counters 2-1071
RF states 2-1071
fast software upgrade 2-638
reloading entire switch 2-639
route processor
synchronizing BOOTVAR 2-10
synchronizing BOOTVAR and configuration register default settings 2-10
synchronizing configuration register 2-10
synchronizing startup config 2-10
setting mode 2-547
synchronizing supervisor engines 2-636
turning off auto synchronization 2-10
reflexive NDR
disabling shortcuts in TCAM 2-442
enabling shortcuts in TCAM 2-442
regex
See regular expression library
regular expression library
acknowledgments for open-source software B-1
related documentation 1-xxv
relationship between duplex and speed commands 2-1187
reloading switch 2-639
remote access
supervisor engines 2-8
remote command
executing directly to module 2-641
executing directly to route processor 2-641
remote login 2-642
remote procedure call
remote SPAN
removing an interface from a channel group 2-22
replication mode
disabling 2-435
enabling 2-435
Reverse Path Forwarding
RFC 1340 2-794
RFC 1757, RMON alarm group
setting alarm 2-648
RFC 1757, RMON MIB 2-649
RMON event table
adding event 2-650
removing event 2-650
RGMP
disabling 2-307
enabling 2-307
RM
configuring
purging time 2-369
configuring purging interval 2-369
disabling purging time 2-369
RMON
adding events 2-650
alarms, disabling 2-648
alarms, enabling 2-648
disabling 2-650
disabling MIB object alarms 2-648
removing events 2-650
setting alarms on MIB objects 2-648
ROM, booting automatically 2-15
ROMMON
displaying status 2-1074
field upgrading 2-1270
programing new ROMMON into Flash 2-1270
setting execution preference 2-1270
ROM monitor mode,
summary 1-6
root guard
disabling 2-1157
displaying
root inconsistency status 2-1082
enabling 2-1157
routed MAC A-8
Route Processor Redundancy
routing protocol packet
policing
controlling 2-490
routing protocol packet policing 2-490
RPC
displaying information 2-1075
RPF
disabling
exists-only checks 2-330
on an interface 2-328
triggered check 2-282
displaying
hardware information 2-945
triggered check events 2-875
enabling
exists-only checks 2-330
on an interface 2-328
setting
check interval 2-284
PIM back-off interval 2-282
triggered check interval 2-282
RSPAN
adding interfaces or VLANs 2-560
deleting interfaces or VLANs 2-560
deleting session 2-560
displaying
session information 2-1014
displaying list 2-1127
starting new session 2-560
RSTP+
configuring link type 2-1158
running configuration
displaying current operating information 2-1077
S
sampled NetFlow
disabling
globally 2-539
on an interface 2-457
displaying status 2-997
enabling
globally 2-539
on an interface 2-457
specifying
sampling method 2-539
sanity check results, displaying 2-699
saving configuration changes 1-11
scheduled switchover
SCP
disabling
fast retry 2-593
displaying information 2-1079
enabling
fast retry 2-593
setting
fast-retry interval 2-593
Secure Sockets Layer
sending back channel
configuring 2-1258
removing 2-1258
server load balancing
service module
disabling session 2-560
enabling session 2-560
setting trusted port state 2-488, 2-508
shaped round robin
show 2-949
show commands
filter 1-7
search 1-7
show platform software pisa split-vlan command 2-1052
simulating a link-up condition 2-158
single-character patterns
special characters, table 1-8
SLB
displaying inband packet count 2-732
SNMP
disabling
authorization traps during unknown context error 2-1147
linkdown during a switch failover 2-1148
transceiver traps 2-1142
displaying
interface index identification numbers 2-1080
enabling
authorization traps during unknown context error 2-1147
linkdown during a switch failover 2-1148
transceiver traps 2-1142
ifIndex persistence
clearing previously interface configuration mode SNMP ifIndex commands 2-1136
disabling globally 2-1143
disabling on an interface 2-1138
enabling globally 2-1143
enabling on an interface 2-1138
informs
disabling 2-1140
enabling 2-1140
removing source designation 2-1145
specifying
source interface
SNMP
specifying
inform source designation 2-1145trap source designation 2-1145
traps
disabling 2-1140
enabling 2-1140
Softfloat
acknowledgments for open-source software B-1
softlink
disabling 2-158
enabling 2-158
software resources
displaying split-VLANs 2-1052
source-only timers
returning to default settings 2-242
setting periodic flooding of multicast packets 2-242
source specific multicast
SPAN
disabling
service module session 2-560
displaying
destination port permit list 2-1013
session information 2-1014
enabling
service module session 2-560
service module session
disabling 2-560
enabling 2-560
SPAN destination port permit list 2-558
displaying 2-1013
spanning tree
active states
displaying 2-1082
configuring link type 2-1158
disabling
BackboneFast 2-1149
BPDU filtering 2-1150
BPDU guard 2-1152
extended system ID display 2-1156
loop guard as a default 2-1159
loop guard mode 2-1157
PortFast BPDU filtering 2-1176
PortFast BPDU guard 2-1178
PortFast by default 2-1179
PortFast by default on all access ports 2-1179
PortFast on an interface 2-1174
root guard mode 2-1157
displaying
active interfaces only 2-1082
active states 2-1082
BackboneFast status 2-1082
bridge status and configuration 2-1082
default path cost method 2-1082
status information 2-1082
status per VLAN 2-1082
summary of interface information 2-1082
UplinkFast status 2-1082
enabling
BackboneFast 2-1149
BPDU filtering 2-1150
BPDU guard 2-1152
extended system ID display 2-1156
loop guard as a default 2-1159
loop guard mode 2-1157
PortFast BPDU filtering 2-1176
PortFast BPDU guard 2-1178
PortFast by default 2-1179
PortFast by default on all access ports 2-1179
PortFast on an interface 2-1174
root guard mode 2-1157
EtherChannel
guard misconfiguration detection 2-1154
interface
portfast mode, disabling 2-1174
portfast mode, enabling 2-1174
path cost
reverting to default 2-1153
setting 2-1153
port priority
reverting to default 2-1180
setting 2-1180
restarting protocol migration 2-88
setting default pathcost calculation method 2-1173
specifying
transmit hold count 2-1181
UplinkFast
disabling 2-1182
enabling 2-1182
VLANs
configuring 2-1184
reverting to defaults 2-1184
SPAN session
adding interfaces or VLANs 2-560
deleting interfaces or VLANs 2-560
deleting session 2-560
starting new session 2-560
special characters
anchoring, table 1-10
SP QoS manager
SRM with SSO
configuring
route converge delay time interval 2-652
setting redundancy mode 2-547
SRR queues
configuring
bandwidth 2-1307
SSL
shutting down 2-157
SSM mapping 2-243
configuring
static mapping database 2-243
disabling 2-243
enabling 2-243
SSO
configuring
route converge delay time interval 2-652
setting redundancy mode 2-547
Stateful Switch Over
static MAC address entries
clearing 2-63
statistics data export
See MLS QoS statistics data export
statistics retrieval
setting interval 2-656
sticky ARP
disabling
global 2-311
per-interface 2-313
enabling
global 2-311
per-interface 2-313
sticky MACs
enabling 2-1218
removing 2-1218
sticky port
deleting 2-86
storm control
disabling suppression mode 2-1196
enabling suppression mode 2-1196
setting suppression level 2-1196
strict-priority queue
mapping CoS values 2-615
stub
enabling non-RPF multicast fastdrop 2-437
subinterface configuration mode, summary 1-6
sup-bootflash
displaying file system information 2-1093
switch console, accessing 2-642
switching, NetFlow
clearing statistics 2-48
setting cache size 2-208
switching characteristics
disabling
capture mode 2-1207
Flexlink 2-1204
enabling
capture function 2-1207
Flexlink 2-1204
excluding from link-up calculation 2-1202
modifying 2-1198, 2-1200, 2-1202
capture function 2-1209
optimizing port configuration for host connection 2-1198
returning to interfaces
capture function 2-1198, 2-1202
switching interface
displaying administrative and operational status 2-773
displaying Flexlink pairs 2-775
Switch-Module Configuration Protocol
switch ports
clearing
VLAN mapping per port 2-1230
configuring
capture ports 2-1207
VLAN mapping per port 2-1230
voice VLANs 2-1235
defining
PVLAN association 2-1224
disabling
VLAN mapping per port 2-1233
enabling
VLAN mapping per port 2-1233
mapping
PVLANs for promiscuous port 2-1225
modifying characteristics 2-1198
port security
configuring aging time 2-1216
configuring aging type 2-1216
disabling 2-1215
displaying setting information 2-1059
enabling 2-1215
removing MAC address from list 2-1218
setting maximum number of secured addresses 2-1220
setting violation action 2-1222
violation actions 2-1222
preventing packet forwarding 2-1206
removing
mapping PVLANs for promiscuous port 2-1225
PVLAN mapping 2-1224
voice VLAN 2-1235
setting
mode 2-1213
trunk characteristics 2-1227
VLAN in access mode 2-1200
specifying destination VLANs 2-1209
switch reload 2-639
synchronizing supervisor engines 2-636
system images
default filename 2-15
system prompts 1-6
systems
configuring FIFO overflow error count 2-1238
system software
booting 2-15
displaying names and sources of configuration files 2-1109
displaying uptime since active 2-1109
displaying version of 2-1109
T
Tab key
command completion 1-1
table contention level
tables
characters with special meaning 1-8
class syntax description 2-595, 2-601
common keyword aliases to URLs 2-98
CoS-to-DSCP mapping table 2-471
default bandwidth values 2-1299
default MTU values 2-574
DSCP-to-CoS default mapping table 2-474
DSCP-to-EXP default mapping table 2-476
ERSPAN destination session configuration mode syntaxes 2-566
ERSPAN source session configuration mode syntaxes 2-567
EXP-to-DSCP default mapping table 2-479
EXP-to-EXP mutation default mapping table 2-480
fsck utility checks and actions 2-148
group syntax description 2-28
IP-Precedence-to-DSCP default mapping 2-482
mac access-list extended subcommands 2-367
match syntax description 2-27, 2-28
MFIB forwarding entries and interface flags 2-879
MFIB platform flags 2-883
relationship between duplex and speed commands 2-130, 2-1188
show cable-diagnostics tdr command output fields 2-682
show cdp neighbors detail field descriptions 2-687
show cdp neighbors field descriptions 2-686
show environment status command output fields 2-714
show environment temperature command output fields 2-717
show interfaces accounting command output fields 2-756
show ip cache flow command output fields—current flow 2-797
show ip cache flow command output fields—flow switching cache 2-796
show ip cache flow command output fields—NetFlow activity by protocol 2-796
show ip cache flow command output fields—packet size distribution 2-795
show ip cache verbose flow field descriptions in activity by protocol display 2-800
show ip cache verbose flow field descriptions in the NetFlow cache display 2-799
show ip cef inconsistency field descriptions 2-806
show ip dhcp snooping command output 2-813
show ip igmp groups field descriptions 2-820
show ip interface field descriptions 2-832, 2-902
show ip mcache field descriptions 2-834
show ip mds interface field descriptions 2-836
show ip mpacket field descriptions 2-839
show ip mroute field descriptions 2-828, 2-842
show ip msdp count field descriptions 2-848
show ip msdp peer field descriptions 2-850
show ip msdp sa-cache field descriptions 2-852
show ip msdp summary field descriptions 2-853
show ip pim bsr field descriptions 2-857
show ip pim mdt bgp field descriptions 2-860
show ip pim mdt history field descriptions 2-861
show ip pim mdt receive field descriptions 2-862
show ip pim mdt send field descriptions 2-864
show ip pim neighbor field descriptions 2-865
show ip pim rp-hash field descriptions 2-868
show ip pim rp mapping field descriptions 2-870
show ipv6 mfib active field descriptions 2-881
show ipv6 mfib count field descriptions 2-882
show ipv6 mfib field descriptions 2-880
show ipv6 mfib verbose field descriptions 2-883
show ip wccp web-cache detail command output fields 2-877
show lacp command output fields 2-891
show memory dead field descriptions 2-906
show mls cef command output fields 2-913, 2-928
show mls cef summary command output fields 2-947
show mpls l2transport vc command field descriptions 2-1019
show policy-map control-plane field descriptions 2-1056
show port flowcontrol command output fields 2-767
show spanning-tree command output fields 2-1083
show spanning-tree vlan command output fields 2-1086
show tcam counts command output fields 2-1098
show version field descriptions 2-1110
show vlan command output fields 2-1114
show vlan private-vlan command output fields 2-1126
show vlans command output fields 2-1129
show vtp command output fields 2-1133
special characters
multipliers, table 1-9
used for anchoring 1-10
speed command options 2-1186
supported duplex command options 2-129
supported speed command options 2-1187
time-based sampling intervals 2-539
URL prefix aliases for local writable storage file systems 2-99
URL prefix aliases for network file systems 2-99
URL prefix aliases for special file systems 2-99
valid cluster numbers 2-150
valid interface types 2-161
TAC
displaying information 2-1102
tag-to-tag load balancing
disabling 2-572
enabling 2-572
TCAM
ACLs
clearing match counters 2-65
setting default action during update 2-400
clearing
ACL match counters 2-65
disabling
optimization for IPv6 ACLs 2-592
sharing of global default ACLs 2-401
shortcuts 2-442
displaying
interface-based information 2-1099
protocol-based information 2-1099
statistical information 2-1097
enabling
optimization for IPv6 ACLs 2-592
sharing of global default ACLs 2-401
shortcuts 2-442
prioritizing interfaces 2-1241
setting
default action during update 2-400
update
setting default action 2-400
TCAM ACL match counters, clearing 2-65
TCL
displaying MLS information 2-1000
TDR
clearing
all interfaces 2-33
specific interface 2-33
displaying cable diagnostic test results 2-681
running cable diagnostics 2-1243
temperature readings
displaying information 2-716
Ternary Content Addressable Memory
time-based ACLs
configuring
time ranges