-
Catalyst 6500 Series Cisco IOS Command Reference, 12.1 E
-
Quick Links to Catalyst 6500 Series Switch Cisco IOS Commands
-
Index
-
Preface
-
Command-Line Interface
-
action to cd
-
channel-group to clear catalyst6000
-
clear counters to debug callback
-
debug cca to duplex
-
erase to mls aging
-
mls exclude to pagp port-priority
-
policy-map to protocol filtering
-
rcv-queue to show bootflash:
-
shutdown vlan to time-range
-
show bootvar to show ip cache
-
T1
-
show ip cef to show mls asic
-
show mls cef to show qm-sp
-
show queueing to show vtp
-
udld to username
-
verify to wrr-queue bandwidth
-
wrr-queue cos-map to wrr-queue threshold
-
Acronyms
-
Acknowledgments for Open-Source Software
-
Table Of Contents
Symbols - Numerics - A - B - C - D - E - F - G - H - I - J - L - M - N - O - P - Q - R - S - T - U - V - W -
Index
Symbols
? command 1-1
| (pipe or vertical bar)
specifying alternative patterns 1-10
Numerics
802.1Q
mapping ISL VLANs 2-780
setting trunk encapsulation characteristics 2-730
802.1Q tagging
disabling on VLANs 2-774
displaying information 2-639
enabling on VLANs 2-774
802.1Q tunneling
disabling 2-215
displaying
enabled ports 2-419
tunneled protocols 2-504
enabling 2-215
setting
CoS value 2-217
drop threshold 2-219
maximum processed protocol packets 2-221
mode 2-717
port interface type 2-717
802.1S
802.1w
802.1x
allowing multiple hosts 2-126
default settings 2-124
disabling
globally 2-130
periodic authentication of client 2-129
disallowing multiple hosts 2-126
displaying
information for all interfaces 2-421
enabling
globally 2-130
periodic authentication of client 2-129
resetting to defaults 2-124
setting
authentication timer 2-131
port control values 2-127
reauthentication count 2-125
802.3ad
A
abbreviating commands
context-sensitive help 1-1
access control lists
accessing
DFC-equipped modules 2-373
module-specific CLI 2-387
access lists
IPX, time ranges 2-743
access maps
applying 2-776
specifying sequence 2-238
ACLs
clearing statistical information 2-27
defining
time ranges 2-743
enabling
time-based ACLs 2-743
merge
displaying current method 2-450
merge activities
debugging 2-83
disabling debugging 2-83
removing
time limitation 2-743
selecting
BDD-based merge method 2-244
ODM-based merge method 2-244
acronyms, list of A-1
Address Resolution Protocol
adjacency
debugging database 2-54
disabling database debugging 2-54
displaying
node information 2-521
table information 2-394
displaying IPC debug information 2-54
aggregate policer
clearing statistics and token counts in high-rate and low-rate policer buckets 2-45
defining 2-284
displaying
information 2-554
MLS QoS
enabling 2-302
removing 2-284
aggressive UDLD
aging time
MAC address table 2-233
ARP
displaying table 2-397
ARP throttling
disabling 2-253
enabling 2-253
ASIC
displaying
type 2-398
version 2-398
assigning an interface to a channel group 2-15
ATA flash
audience xix
authentication
setting username 2-755
authentication proxy
watch list
adding IP address 2-171
clearing entries 2-28
configuring 2-171
disabling 2-171
displaying 2-480
enabling 2-171
setting maximum login attempts 2-170
auto MDIX
disabling 2-242
enabling 2-242
auto media dependent interface with crossover detection
autonegotiation
setting delay timer 2-736
B
BDD
selecting ACL merge method 2-244
BGP
configuring maximum number of parallel routes 2-241
binary decision diagrams
BOOT environment variable
displaying information 2-401
bootflash
displaying OSM information 2-415
displaying WAN information 2-415
file system, displaying information 2-399
Border Gateway Protocol
BPDU
debugging spanning tree activities 2-102
BPDU filtering
disabling
by default 2-685
on an interface 2-661
enabling
by default 2-685
on an interface 2-661
BPDU guard
disabling
by default 2-687
on an interface 2-663
enabling
by default 2-687
on an interface 2-663
bridged traffic
microflow policing 2-287
bridge protocol data unit
buffer allocation
displaying information 2-570
bus utilization
displaying 2-406
C
cable diagnostics
PRBS
displaying test results 2-402
running test 2-740
TDR
displaying test results 2-404
running test 2-740
CCA register activity
debugging 2-57
disabling debugging 2-57
CDP
displaying
neighbor information 2-408
CEF
ARP throttling
disabling 2-253
enabling 2-253
consistency checker parameters
disabling 2-173
enabling 2-173
consistency checker types
disabling 2-173
enabling 2-173
disabling
rate-limiting 2-255
displaying
next-hop information 2-490
VLAN configuration information 2-490
VLAN interface status 2-490
enabling
missing prefix detection 2-173
rate-limiting 2-255
epoch
beginning new epoch 2-29
displaying information 2-485
incrementing 2-29
inconsistencies
clearing 2-31
displaying 2-487
setting
checker type 2-173
elapsed time 2-173
load balancing to include Layer 4 ports 2-254
period between scans 2-173
rate-limiting 2-255
specifying
maximum number of prefixes to check per scan 2-173
passive scan check 2-173
changing to untrusted port state 2-311
chassis
displaying
chassis MAC address ranges 2-406
current and peak traffic meter readings 2-406
percentage of backplane utilization 2-406
product number 2-457
serial number 2-457
switching clock failure recovery mode 2-406
displaying model type 2-457
chassis serial number, displaying 2-455
checksum
computing
MD5 signature 2-757
verifying
compressed image 2-147
Flash memory file 2-757
CIR
setting rate 2-284
Cisco Express Forwarding
Cisco IOS VLAN subinterface
displaying information 2-648
class map
displaying information 2-411
MLS QoS
enabling 2-304
class map configuration mode
accessing 2-20
clearing a Gigabit Ethernet interface 2-25
CLI
accessing
module-specific CLI 2-373
remote login 2-373
string search
alternation 1-10
anchoring 1-10
expressions 1-7
filtering 1-7
multiple-character patterns 1-9
multipliers 1-9
parentheses for recall 1-11
searching outputs 1-7
single-character patterns 1-7
using 1-7
client ID 2-590
command-line interface
command modes
accessing 1-5
exiting 1-5
understanding 1-5
commands
executing multiple interfaces simultaneously 2-164
committed information rate
configuration, saving 1-11
connection attempted by a failed server
changing to defaults 2-377
defining elapsed times 2-377
consistency checker
configuring 2-262
disabling 2-262
displaying
information 2-537
enabling 2-262
copying files 2-51
enabling automatic checksum verification 2-147
validating image 2-147
CoS value
defining default value 2-289
counters
clearing
interface counters 2-23
traffic meter counters 2-22
displaying
error counters 2-463
inband packet counts 2-445
interface counter information 2-412
total suppression discard counts 2-463
trunk counters 2-463
CPU time
guaranteeing processing time 2-383
crossbar fabric
crossbar fallback
allowing
switch to come online without SFM 2-144
switch to come online with SFM 2-144
preventing
switch to come online without SFM 2-144
switch to come online with SFM 2-144
CSM-specific commands
manager
removing manager configuration 2-238
specifying port for DFP-to-CSM connection 2-238
D
debounce timer
configuring 2-225
disabling 2-225
displaying debounce timer configuration 2-466
enabling 2-225
debug Commands
debug adjacency 2-54
debug backup 2-55
debug callback 2-56
debug cca 2-57
debug condition interface 2-58
debug condition standby 2-60
debug condition vlan 2-62
debug earl 2-64
debug ehsa 2-65
debug entry 2-66
debug etherchnl 2-67
debug ethernet-interface 2-69
debug fastethernet 2-70
debug fm 2-71
debug gssapi 2-72
debug icc 2-73
debug iccshim 2-74
debug interface 2-75
debug ipc 2-77
debug l2-mgr events 2-79
debug l3-mgr 2-80
debug local-ack 2-81
debug ltl 2-82
debug mergreapi 2-83
debug mls ip multicast 2-84
debug mls rp 2-85
debug monitor 2-86
debug msc 2-87
debug netdr 2-88
debug nvram 2-90
debug pagp 2-91
debug pm 2-93
debug priority 2-95
debug rpc 2-98
debug scp 2-100
debug smf updates 2-101
debug spanning tree 2-102
debug spanning tree backbonefast 2-103
debug spanning tree switch 2-104
debug spanning tree uplinkfast 2-106
debug sw-vlan 2-107
debug sw-vlan ifs 2-108
debug sw-vlan notification 2-110
debug sw-vlan vtp 2-111
debug tcam 2-113
debugging
ACL merge activities 2-83
activity monitoring 2-86
adjacency database information 2-54
backup events 2-55
CCA register activity 2-57
EARL activity 2-64
EHSA activity 2-65
EtherChannel shim 2-67
Ethernet interface events 2-69
Fast Ethernet interface
events 2-70
packets 2-70
feature manager
activities 2-71
events 2-71
GSSAPI events 2-72
HSRP state changes 2-60
ICC events 2-73
ICC shim events 2-74
incoming queue entries 2-66
interface-related activities 2-58, 2-75
IPC activities 2-77
ISL VLAN ID debug messages 2-110
Layer2 manager events 2-79
Layer3 manager activities 2-80
local acknowledgement activities 2-81
LTL manager activities 2-82
MLS IP multicast activities 2-84
MLS RP activities 2-85
MSC activities 2-87
NetDriver activities 2-88
NVRAM activities 2-90
PAgP activities 2-91
PAgP shim 2-67
PF activities 2-92
PM activities 2-93
PPP telephone callback activity 2-56
priority output queueing 2-95
QM activity 2-96
QoS manager activity 2-97
RPC activity 2-98
SCP activity 2-100
SMF address insertions and deletions 2-101
spanning tree
activities 2-102
BackboneFast events 2-103
switch shim 2-104
UplinkFast events 2-106
TCAM activity 2-113
VLAN
manager activities 2-107
VLAN manager IOS file system error tests 2-108
VLAN output 2-62
VTP protocol debug messages 2-111
debugging backup events 2-55
debug pf command 2-92
debug qm command 2-96
debug qm-sp command 2-97
default form of a command, using 1-6
delimiter
configuring for MLS QoS 2-307
denial of service
destination address
MLS QoS
setting statistics data export destination address 2-308
DFC
remote login
attach command 2-5
remote login command 2-373
diagnostic testing
bypassing 2-120
directed broadcasts
disabling 2-256
displaying information 2-521
enabling 2-256
directories
creating 2-243
directory
setting the default 2-12
disabling debugging backup events 2-55
disabling display of monitoring activity 2-86
displaying monitoring activity 2-86
Distributed Forwarding Card
document conventions xx
document organization xix
DoS
ARP throttling
disabling 2-253
enabling 2-253
rate limiting
disabling 2-255
enabling 2-255
dot1q
dot1x
DSCP
displaying
mutation mapping 2-551
duplex mode
configuring 2-133
dynamic MAC address entries
clearing 2-36
dynamic SVI
accessing 2-166
creating 2-166
deleting 2-166
E
EARL
debugging 2-64
disabling debugging 2-64
egress
defining DSCP-to-CoS mapping 2-292
deleting
DSCP-to-CoS mapping 2-292
displaying
DSCP mutation mapping 2-551
mode information 2-537
queueing information 2-593
removing DSCP-to-CoS mapping 2-292
EHSA activity
debugging 2-65
disabling debugging 2-65
Enhanced Address Recognition Logic
Enhanced Password Security
disabling 2-755
enabling 2-755
enhanced password security
establishing 2-755
entering VLAN database 2-772
environmental alarms
displaying information 2-423
EOBC interface
displaying information 2-431
EoMPLS
disabling
port based forwarding 2-333
VLAN based forwarding 2-333
enabling
port based forwarding 2-333
VLAN based forwarding 2-333
epoch
displaying information 2-485
incrementing 2-29
rebuilding CEF table 2-29
error counters
displaying summary 2-624
error disable
detection
configuring timer 2-137
specifying recovery cause 2-137
recovery
configuring timer 2-140
displaying information 2-435
specifying recovery cause 2-140
state
displaying information 2-471
error disable detection
displaying information 2-434
EtherChannel
assigning interface to an EtherChannel group 2-15
debugging
disabling debugging 2-67
shim debuggings 2-67
spanning tree activities 2-102
displaying
information 2-436
guard misconfiguration detection
detecting 2-666
disabling 2-666
enabling 2-666
error message 2-666
removing interface from an EtherChannel group 2-15
Ethernet interface
debugging 2-69
debugging events 2-69
disabling debugging 2-69
Ethernet over Multiprotocol Label Switching
executing remote switch command 2-371
export interval
MLS QoS
setting 2-310
expressions
matching multiple expression occurrences 1-9
multiple-character patterns 1-9
multiplying pattern occurrence 1-11
single-character patterns 1-7
specifying alternative patterns 1-10
extended MAC access list
defining 2-231
extended range VLANs
entering config-VLAN mode 2-763
extended-range VLANs
configuring
characteristics in capture mode 2-713
STP 2-692
creating dynamic SVI 2-166
defining
PVLAN association 2-724
deleting
dynamic SVI 2-166
PVLAN association 2-724
RSPAN session 2-329
SPAN session 2-329
disabling capture mode 2-711
displaying
current operating information 2-601
filter information 2-640
enabling capture mode 2-711
executing a command on multiple interfaces 2-164
setting
when in access mode 2-709
starting
new RSPAN session 2-329
new SPAN session 2-329
extended system ID display
disabling 2-667
enabling 2-667
F
fabric
disabling
switching mode 2-145
trunking mode 2-145
displaying
channel status 2-440
errors 2-440
information 2-440
percentage utilization 2-440
slot numbers 2-440
switching mode 2-440
enabling
switching mode 2-145
trunking mode 2-145
specifying
MOTD banner 2-142
fan trays
displaying part number 2-426
Fast Ethernet interface
debugging 2-70
disabling debugging 2-70
fast software upgrade
feature manager
debugging
disabling debugging 2-71
events and activities 2-71
displaying
CBAC-configured ACL lists and ports 2-446
dynamic reflexive entries 2-449
general information 2-443
inband packet count 2-445
per-interface information 2-447
per-VLAN information 2-451
summaries 2-450
field-replaceable unit
field upgradeable ROMMON
upgrading
route processor 2-753
switch processor 2-753
files
copying 2-51
disabling automatic image verification 2-51
enabling automatic checksum verification 2-147
validating image 2-147
file system
erase 2-135
file system consistency check
Flash file system
check and repair 2-152
checking for damage 2-152
creating new directory 2-243
directory recovery 2-751
enabling fsck utility 2-152
file recovering 2-751
format 2-150
permanently deleting files 2-697
setting the default 2-12
verify checksum 2-757
Flash memory
formatting 2-150
flow control
configuring receive mode 2-148
configuring send mode 2-148
displaying configuration information 2-468
port guidelines 2-149
flow fragments
permit configuration 2-168
flow mask
restoring 2-250
specifying 2-250
fm
FRU
displaying IDPROM information 2-455
displaying status information 2-426
fsck utility
enabling 2-152
setting automatic mode 2-152
FSU
redundancy force-switchover command 2-368
G
GBIC
displaying type 2-460
Gigabit Ethernet interface
clearing hardware logic 2-25
global configuration mode, summary 1-5
group cache entries
clearing 2-33
GSSAPI events
debugging 2-72
disabling debugging 2-72
H
half-duplex mode
configuring 2-133
hardware
verifying programmed values 2-591
hardware Layer 3 switching
displaying
adjacency node information 2-521
adjacency table information 2-394
entry information 2-519
hardware load-sharing information 2-523
hardware table entry information 2-524
IP entry information 2-526
IPX entry information 2-528
MAC address information 2-530
number of prefixes in hardware Layer3 switching table 2-532
packet information 2-532
statistical information 2-531
HSRP 2-703
hardware logic
clearing on VLANs 2-26
hardware switching
configuring
consistency checker 2-262
disabling consistency checker 2-262
displaying
CEF table information 2-489
consistency checker information 2-537
enabling consistency checker 2-262
host connection
optimizing port configuration 2-707
hot standby protocol
debugging 2-60
disabling debugging 2-60
limiting output 2-60
Hot Standby Router Protocol
HSRP
configuring
hardware Layer 3 switching 2-703
initialization delay 2-699
tracking 2-701
disabling
delay period 2-699
displaying
delay period information 2-616
I
ICC
debugging 2-73
disabling debugging 2-73
displaying counter and status information 2-453
shim events
debugging 2-74
disabling debugging 2-74
IDPROM
displaying information 2-455
ifIndex persistence
clearing previously interface configuration mode SNMP ifIndex commands 2-654
disabling globally 2-659
disabling on an interface 2-655
enabling globally 2-659
enabling on an interface 2-655
IGMP
clearing IGMP group cache entries 2-33
displaying
explicit-tracking status 2-491
interface configuration information 2-491
interface status information 2-491
snooping
configuring a Layer 2 port as a multicast router port 2-190
configuring fast leave 2-186
configuring last member query interval 2-188
configuring static member 2-194
disabling 2-185
displaying information 2-493
enabling 2-185
enabling multicast support within a subnet 2-192
enabling querier function 2-192
maximum number of Layer 2 entries 2-187
IGMP snooping
configuring
last member query interval 2-188
maximum number of Layer 2 entries 2-187
disabling 2-185
fast leave processing 2-186
multicast support within a subnet 2-192
displaying
status and configuration information 2-491
status and configuration information for VLAN 2-491
enabling 2-185
fast leave processing 2-186
multicast support within a subnet 2-192
multicast router
learning method, configuring 2-190
next-hop interface, specifying 2-190
images
disabling verification for current operation 2-51
enabling automatic checksum verification 2-147
validating image 2-147
inactive state
displaying reason for the inactive state 2-471
incoming queue entries
debugging 2-66
disabling debugging 2-66
informs, enabling 2-657
ingress
defining
CoS-to-DSCP mapping 2-291
defining IP precedence-to-DSCP mapping 2-294
deleting
CoS-to-DSCP mapping 2-291
deleting IP precedence-to-DSCP mapping 2-294
displaying
queueing information 2-593
inline power
configuring administrative mode 2-349
displaying
power consumed by module 2-586
status information 2-586
inter-card communication
interface configuration mode
entering 2-160
interface configuration mode, summary 1-5
interface counters
displaying information 2-412
interface-range macro
creating 2-118
interface-related activities
disabling debugging 2-58, 2-75
interfaces
configuring
duplex mode 2-133
half-duplex mode 2-133
interface speeds 2-694
displaying
administrative status 2-474
description 2-467
error counters 2-463
error-disabled state 2-471
flow control information 2-468
interface capabilities 2-460
operation status 2-474
PVLAN mapping 2-470
status 2-467
status summary 2-473
total number of interface VLANs 2-473
total suppression discard counts 2-463
traffic 2-458
trunk counters 2-463
trunk information 2-477
entering interface configuration mode 2-160
switching ports
displaying administrative and operational status 2-474
displaying status 2-474
intermediate system-to-intermediate system
internal VLAN allocation
configuring 2-778
default setting 2-778
displaying
allocation information 2-642
displaying hidden VLAN-to-WAN interface mapping 2-415
internal VLANs
displaying status 2-631
Internet Group Management Protocol
Internetwork Packet Exchange
interprocessor communication
Inter-Switch Link VLANs
IP
clearing
access list statistical information 2-27
NetFlow
enabling switching 2-203
IPC
debugging activities 2-77
disabling debugging 2-77
displaying cache flow entries 2-481
IP IGMP
displaying
snooping information for VLAN interface 2-491
IP MLS
clearing entries 2-38
IP multicast
routing
displaying routing table 2-494
displaying snooping information 2-493
statistic counters
resetting 2-42
IP output queue
limiting size 2-155
restoring default size 2-155
IP routing protocols
configuring maximum number of parallel routes 2-241
IP shortcuts to MSFC
disabling 2-316
enabling 2-316
IPv6
ACLs
displaying NetFlow entries for reflexive ACLs 2-544
displaying
NetFlow entries 2-544
NetFlow hardware configuration 2-544
IPX (Internet Packet Exchange)
access lists, time ranges 2-743
IPX MLS
clearing entries 2-38
IPX shortcuts to MSFC
disabling 2-318
enabling 2-318
IS-IS
configuring network entity title 2-339
ISL VLANs
debug messages
debugging 2-110
disabling debugging 2-110
mapping to 802.1Q VLANs 2-780
issuing EXEC-level commands in other modes 2-123
J
jumbo frames
default value 2-336
restoring default value 2-336
setting maximum packet size 2-336
setting maximum transmission unit size 2-336
L
LACP
configuring interface 2-15
deselecting channeling protocol 2-18
displaying
internal information 2-508
neighbor information 2-508
port state flags 2-508
protocol setting 2-436
statistical information 2-508
system identification 2-508
port state flags
displaying 2-508
setting
port priority 2-223
system priority 2-224
setting channeling protocol 2-18
last member query interval
configuring for IGMP snooping 2-188
Layer 2
configuring port as a group member 2-194
configuring port as a multicast router port 2-190
Layer 2 interface type
resetting 2-717
setting 2-717
Layer 2 manager events
debugging 2-79
disabling debugging 2-79
Layer 3 manager
displaying information 2-506
Layer 3 manager activities
debugging 2-80
disabling debugging 2-80
Link Aggregation Control Protocol
link debounce
displaying
timer status 2-460
link debounce timer
configuring 2-225
disabling 2-225
displaying debounce timer configuration 2-466
enabling 2-225
link-status event messages
disabling
globally 2-227
on an interface 2-229
on a subinterface 2-230
on system initialization 2-227
enabling
globally 2-227
on an interface 2-229
on a subinterface 2-230
on system initialization 2-227
link type
configuring 2-669
local acknowledgement activities
debugging 2-81
disabling debugging 2-81
loop guard
disabling 2-668
enabling 2-668
LTL manager activities
debugging 2-82
disabling debugging 2-82
M
MAC address tables
adding
static entries 2-234
aging time
configuring 2-233
clearing dynamic entries 2-36
clearing static entries 2-36
configuring
aging time 2-233
static entries 2-234
static entries with IGMP snooping disabled 2-234
unicast flood protection 2-236
disabling
IGMP snooping on static MAC addresses 2-234
displaying
aging time 2-512
DFC-specific information 2-512
dynamic table entries 2-512
entry count 2-512
information 2-512
interface-specific information 2-512
multicast table entries only 2-512
number of manually configured entries 2-512
unicast flood protection information 2-516
removing
static entries 2-234
static entries
adding 2-234
configuring 2-234
removing 2-234
unicast flood protection
configuring 2-236
displaying information 2-516
macro
creating an interface-range macro 2-118
maintenance loop signaling entity
mapping
802.1Q VLANs to ISL VLANs 2-780
accessing
QoS policy map configuration mode 2-343
configuring
egress DSCP-to-CoS mapping 2-292
ingress IP precedence-to-DSCP mapping 2-294
policed DSCP values to marked-down DSCP value mapping 2-296
QoS policy map 2-343
configuring QoS class maps 2-20
creating VLAN access map 2-770
deleting
CoS-to-DSCP mapping 2-291
egress DSCP-to-CoS mapping 2-292
ingress IP precedence-to-DSCP mapping 2-294
policed DSCP values to marked-down DSCP value mapping 2-296
QoS class maps 2-20
QoS policy map 2-343
displaying
class map information 2-411
information 2-470
policy map information 2-580
policy map interface information 2-582
entering VLAN access-map command mode 2-770
removing VLAN access map 2-770
match subcommand
accessing 2-20
maximum NetFlow table allocation
configuring 2-278
maximum transmission unit
MD5 signature
computing 2-757
Media Access Control
message digest 5
message-of-the-day
microflow policing
enabling 2-290
removing 2-290
microflow policing for bridged traffic
enabling 2-287
removing 2-287
MLS
configuring
fast-aging time 2-246
long-aging time 2-247
normal-aging time 2-248
directed broadcasts
displaying information 2-521
disabling directed broadcast 2-256
displaying
ACL merge method 2-450
ASIC version 2-518
packet error information 2-558
statistical information 2-558
statistics data export information 2-555
enabling
directed broadcast 2-256
NetFlow entry feature 2-277
interface
assigning a VLAN ID 2-323
removing a management interface 2-320
removing a VLAN ID 2-323
specifying a management interface 2-320
NDE
clearing counters 2-43
clearing filter 2-44
disabling population of additional fields 2-273
displaying status and configuration information 2-555
enabling export feature 2-274
enabling population of additional fields 2-273
removing address 2-321
removing filter options 2-271
removing source IP address of collector 2-276
specifying address 2-321
specifying filter options 2-271
specifying source IP address 2-276
permitting traffic 2-258
QoS statistics data export
aggregate policer 2-302
class map 2-304
delimiter 2-307
destination address 2-308
disabling globally 2-299
enabling globally 2-299
interval 2-310
per-port disabling 2-300
per-port enabling 2-300
removing excluded protocol port 2-249
restoring flow mask 2-250
selecting ACL merge method 2-244
specifying excluded protocol port 2-249
specifying flow mask 2-250
TCL
displaying information 2-560
VLAN
displaying statistical information 2-561
VTP domain
linking 2-324
removing 2-324
MLSE
removing entry 2-41
MLS IP
displaying
mode information 2-537
statistical information for NetFlow entries 2-540
displaying information 2-534
global
configuring threshold 2-268
disabling 2-259
disabling consistency checker 2-262
disabling NetFlow-based non-rpf feature 2-264
disabling subnet download 2-261
disabling support for policy-routed packets 2-269
enabling 2-259
enabling consistency checker 2-262
enabling NetFlow-based non-rpf feature 2-264
enabling subnet download 2-261
enabling support for policy-routed packets 2-269
interface
disabling external switches 2-317
disabling internal router 2-252
disabling NetFlow-based non-RPF feature 2-265
disabling shortcuts 2-260
enabling external switches 2-317
enabling internal router 2-252
enabling NetFlow-based non-RPF feature 2-265
enabling non-RPF multicast fastdrop 2-266
enabling shortcuts 2-260
IP shortcuts to MSFC
disabling 2-316
enabling 2-316
multicast activities
debugging 2-84
disabling debugging 2-84
MLS IPX
displaying information 2-541
interface
disabling 2-270
disabling external switches 2-319
enabling 2-270
enabling external switches 2-319
IPX shortcuts to MSFC
disabling 2-318
enabling 2-318
MLS QoS
aggregate policer
clearing statistics and token counts in high-rate and low-rate policer buckets 2-45
defining 2-284
removing 2-284
attaching a policy-map to an interface 2-386
clearing statistics and token counts in high-rate and low-rate policer buckets 2-45
default CoS value
defining 2-289
removing 2-289
disabling
port attribute checks on EtherChannel bundling 2-288
port queueing mode 2-297
displaying
aggregate policer information 2-554
information 2-551
egress DSCP-to-CoS mapping
defining 2-292
removing 2-292
enabling
port attribute checks on EtherChannel bundling 2-288
port queueing mode 2-297
extended trust
configuring trust mode 2-313
displaying trust mode 2-593
global
disabling 2-281
disabling PFC QoS and enabling port queueing 2-281
enabling 2-281
ingress CoS-to-DSCP mapping
defining 2-291
removing 2-291
ingress IP precedence-to-DSCP mapping
defining 2-294
removing 2-294
interface
changing to untrusted port state 2-311
disabling 2-283
enabling 2-283
setting trusted port state 2-311
microflow policing
enabling 2-290
removing 2-290
microflow policing for bridged traffic
enabling 2-287
removing 2-287
policed in-profile DSCP mapping
defining 2-296
removing 2-296
policy-map configuration mode
accessing 2-343
exiting 2-343
removing a policy-map from an interface 2-386
VLAN switch port
disabling 2-315
enabling 2-315
MLS QoS policy maps
class option description, table 2-344
configuring 2-343
MLS RP activities
debugging 2-85
disabling debugging 2-85
modes
modules
power cycling 2-157
powering down 2-348
powering on 2-348
more commands
filter 1-7
search 1-7
--More-- prompt
filter 1-7
search 1-7
MOTD banner
fabric module 2-142
MPLS
disabling
tag-to-tag load balancing 2-335
disabling routing 2-333
displaying
state of currently routed VCs 2-565
enabling
tag-to-tag load balancing 2-335
enabling routing 2-333
tag switching
disabling load balancing 2-335
displaying table information 2-569
enabling load balancing 2-335
MSC activities
debugging 2-87
disabling debugging 2-87
MSFC
displaying
buffer allocation information 2-570
fault information 2-570
internal information 2-570
net interrupt information 2-570
processor TLB registers 2-570
standby MSFC2 DRAM 2-401
programing new ROMMON into Flash 2-753
setting execution preference 2-753
MSFC commands
show cwan 2-415
MST
configuration submode command
instance 2-158
name 2-338
revision 2-378
show 2-392
configuring
forward delay 2-676
hello-time 2-677
max-age 2-678
max-hops 2-679
root as primary 2-680
root as secondary 2-680
displaying
current configuration 2-392
MST protocol information 2-613
MST region configuration information 2-613
pending configuration 2-392
entering configuration submode 2-674
instance
mapping VLANs 2-158
mapping
PVLANs to instance 2-357
VLANs 2-158
restarting protocol migration 2-48
setting
configuration revision number 2-378
MST region name 2-338
path cost for instances 2-672
port priority for instances 2-672
switching to PVST mode 2-671
MTU
default values 2-336
restoring default value 2-336
setting
maximum Layer 2 payload size 2-737
maximum Layer 3 payload size 2-737
maximum packet size 2-336
maximum size 2-336
multicast router
displaying routing table 2-494
displaying snooping information 2-493
Multilayer Switch Feature Card
Multilayer Switching
multiple-character patterns 1-9
Multiple Spanning Tree
Multiprotocol Label Switching
N
NDE
clearing
counters 2-43
filter 2-44
disabling
population of additional fields 2-273
sampled NetFlow Data Export on an interface 2-279
displaying
aging information 2-544
hardware status 2-544
sampled NetFlow Data Export status 2-557
status and configuration information 2-555
status information 2-543
enabling
export feature 2-274
population of additional fields 2-273
sampled NetFlow Data Export on an interface 2-279
filter options
removing 2-271
specifying 2-271
removing address 2-321
sampled NDE
disabling on an interface 2-279
enabling on an interface 2-279
sampled NetFlow Data Export
specifying sampling method 2-325
specifying address 2-321
specifying source IP address of collector 2-276
NDE interface export
flow masks 2-271
specifying filter options 2-271
NET
configuring 2-339
NetDriver activities
debugging 2-88
disabling debugging 2-88
NetFlow
aggregation
configuring specific aggregation caches 2-175
displaying cache flow entries 2-481
configuring
aggregation caches—specific 2-175
maximum flow allocation 2-278
disabling
sampled NetFlow Data Export globally 2-325
displaying
aging information 2-544
cache flow entries 2-481
hardware status 2-544
IP flow mask 2-544
statistical information 2-534
switched packet counts 2-558
table information 2-534
displaying IPX information 2-549
enabling
sampled NetFlow Data Export globally 2-325
switching 2-203
enabling entry creation 2-277
global
disabling non-rpf feature 2-264
enabling non-rpf feature 2-264
hardware switching
displaying CEF table information 2-489
incorporating bridged/IntraVLAN traffic 2-287
interface
disabling non-RPF feature 2-265
enabling non-RPF feature 2-265
specifying source interface 2-181
monitoring
NetFlow table usage on DFCs 2-280
NetFlow table usage on SP 2-280
switching
clearing statistics 2-32
displaying cache flow entries 2-481
exporting cache entries 2-179
setting cache size 2-177
specifying source interface 2-181
specifying version 2-183
table usage on DFCs
monitoring 2-280
table usage on SP
monitoring 2-280
NetFlow Data Export
network entity title
network interrupt
displaying information 2-570
next-hop
displaying CEF VLAN information 2-490
no form of a command, using 1-6
non-RPF multicast fastdrop
enabling 2-266
NVRAM activities
debugging 2-90
disabling debugging 2-90
O
ODM
selecting ACL merge method 2-244
online diagnostics
bypassing boot-up diagnostic testing 2-120
displaying current diagnostic level 2-417
displaying diagnostic TOC 2-417
displaying test results 2-417
global configuration mode
clearing schedule 2-120
setting boot-up diagnostic level 2-120
setting up schedule 2-120
order-dependent merge algorithm
OSM
displaying bootflash information 2-415
displaying statistical information 2-415
displaying VLAN-to-WAN interface mapping 2-415
P
packet error information, displaying 2-558
paging prompt
PAgP
clearing information 2-47
configuring interface 2-15
debugging 2-91
disabling debugging 2-67
shim debuggings 2-67
deselecting channeling protocol 2-18
disabling debugging 2-91
displaying
protocol information 2-436
hot standby mode
returning to defaults 2-342
selecting ports 2-342
input interface of incoming packets
learning 2-341
returning to defaults 2-341
port channels
displaying information 2-574
setting channeling protocol 2-18
passwords
establishing enhanced password security 2-755
setting username 2-755
pathcost
setting STP default pathcost calculation method 2-682
PBR
disabling 2-269
enabling 2-269
per-VLAN spanning tree
PF activities
debugging 2-92
disabling debugging 2-92
PIM
disabling
Auto-RP groups 2-200
disabling triggered RPF check 2-197
displaying
triggered RPF check events 2-499
enabling
Auto-RP groups 2-200
setting
back-off interval 2-197
check interval 2-199
triggered check interval 2-197
pipe symbol
specifying alternative patterns 1-10
PIR
platform
displaying
CPU EEPROM information 2-576
fault data 2-576
IP multicast-related information 2-576
MSFC information 2-576
net interrupt information 2-576
processor TLB register information 2-576
platforms
displaying
buffer allocation information 2-576
PM activities
debugging 2-93
disabling debugging 2-93
Point A-6
point-to-point link type
configuring 2-669
Point-to-Point Protocol
policer
policy-based routing
See PBR 2-269
policy maps
clearing marking configuration 2-388
displaying information 2-580
displaying per-interface information 2-582
marking matched traffic with DSCP value 2-388
marking matched traffic with IP precedence value 2-390
port channels
accessing 2-162
clearing information 2-47
creating 2-162
displaying
channel group information 2-574
counter information 2-463
interface capabilities 2-460
load distribution method
resetting to defaults 2-346
setting 2-346
portName MIB objects
configuring 2-698
port ranges
executing 2-164
port security
configuring
aging time 2-720
disabling 2-719
displaying setting information 2-584
enabling 2-719
removing
MAC address from list 2-721
setting
maximum number of secured addresses 2-722
maximum secure MAC addresses 2-721
violation action 2-723
violation actions 2-723
port speeds
configuring 2-694
default 2-694
power cycling modules 2-157
powering down empty slots 2-348
power redundancy mode
setting 2-350
power status
displaying 2-586
power supplies
displaying
product number 2-456
serial number 2-456
type 2-456
setting power redundancy mode 2-350
PPP
disabling
calls to interface reset vector 2-351
generation of LCP down/keepalive failure link traps 2-351
enabling
calls to interface reset vector 2-351
generation of LCP down/keepalive failure link traps 2-351
PPP telephone callback activity
debugging 2-56
disabling debugging 2-56
PRBS
displaying cable diagnostic test results 2-402
running cable diagnostics 2-740
priority output queueing
debugging 2-95
disabling debugging 2-95
private VLANs
privileged EXEC mode, summary 1-5
processor TLB registers
displaying information 2-570
promiscuous ports
setting mode 2-717
prompts
system 1-5
protocol filtering
disabling 2-358
displaying information 2-589
enabling 2-358
modifying mode 2-728
Protocol Independent Multicast
protocol tunneling
disabling interfaces 2-215
displaying protocols 2-504
enabling interfaces 2-215
setting
CoS value 2-217
drop threshold 2-219
specifying maximum processed protocol packets 2-221
pseudo random binary sequence
PVLANs
defining association 2-724
deleting association 2-724
disabling sticky-ARP 2-205
displaying
configuration information 2-474
currently configured information 2-645
mapping information 2-470
enabling sticky-ARP 2-205
mapping
for promiscuous port 2-726
primary and secondary VLAN 2-355
to an instance 2-357
setting
host ports 2-717
interface type 2-717
promiscuous mode 2-717
VLAN interface configuration mode
mapping 2-355
primary and secondary VLAN mapping 2-355
removing mappings 2-355
VLAN submode
adding VLANs 2-353
configuring association 2-353
designating VLANs 2-353
removing VLANs 2-353
PVST
switching to MST mode 2-671
Q
QDM
disconnecting a session 2-122
displaying
client ID 2-590
information and status about currently active QDM clients 2-590
Q-in-Q
802.1Q in 802.1Q
QM
disabling activity debugging 2-96
displaying switch processor information 2-591
enabling activity debugging 2-96
QM-SP
disabling activity debugging 2-97
enabling activity debugging 2-97
QoS
accessing
class map configuration mode 2-20
class map
displaying information 2-411
clearing
global interface counters 2-23
configuring
class maps 2-20
time-based ACLs 2-743
enabling
time-based ACLs 2-743
manager
displaying information 2-591
policy maps
clearing marking configuration 2-388
displaying information 2-580
displaying per-interface information 2-582
marking matched traffic with DSCP value 2-388
marking matched traffic with IP precedence value 2-390
rcv-queue ratio limit
setting 2-361
removing
ACL time-range limitation 2-743
transmit-queue size ratio
setting 2-788
QoS Device Manager
QoS manager
QoS statistics data export
See MLS QoS statistics data export
question command 1-1
queueing
displaying information 2-593
R
rapid per-VLAN spanning tree
rapid PVST
disabling 2-671
enabling 2-671
Rapid Spanning Tree Protocol
Rapid Spanning Tree Protocol+
rcv-queues
mapping CoS values 2-359
returning to default values 2-363
setting drop threshold 2-365
setting ratio limit 2-361
specifying maximum threshold 2-363
real servers
changing active connections 2-240
limiting active connections 2-240
receive queues
recovering a file 2-751
redundancy
displaying
information 2-595
RF client list 2-595
RF operational counters 2-595
displaying RF states 2-595
fast software upgrade 2-368
reloading entire switch 2-369
route processor
synchronizing BOOTVAR 2-8
synchronizing BOOTVAR and configuration register default settings 2-8
synchronizing configuration register 2-8
synchronizing startup config 2-8
setting mode 2-327
synchronizing supervisor engines 2-367
turning off auto synchronization 2-8
related documentation xix
reloading switch 2-369
remote access
DFC-equipped modules 2-5
remote command
executing directly to module 2-371
executing directly to route processor 2-371
remote login 2-373
remote procedure call
remote SPAN
removing an interface from a channel group 2-15
Reverse Path Forwarding
RFC 1340 2-481
RFC 1757, RMON alarm group
setting alarm 2-379
RFC 1757, RMON MIB 2-380
RMON event table
adding event 2-381
removing event 2-381
RGMP
debugging 2-78
disabling 2-201
enabling 2-201
RMON
adding events 2-381
alarms, disabling 2-379
alarms, enabling 2-379
disabling 2-381
disabling MIB object alarms 2-379
removing events 2-381
setting alarms on MIB objects 2-379
ROMMON
displaying status 2-598
field upgrading 2-753
programing new ROMMON into Flash 2-753
setting execution preference 2-753
ROM monitor mode,
summary 1-6
root guard
disabling 2-668
displaying
root inconsistency status 2-607
enabling 2-668
Route Processor Redundancy
Route Processor Redundancy+
RPC
debugging activity 2-98
disabling debugging 2-98
displaying information 2-599
enabling debugging 2-98
RPF
disabling
exists-only checks 2-208
interface 2-206
triggered check 2-197
displaying
triggered check events 2-499
enabling
exists-only checks 2-208
interface 2-206
setting
check interval 2-199
PIM back-off interval 2-197
triggered check interval 2-197
RPR+
displaying
redundancy information 2-595
switchover information 2-595
fast software upgrade 2-368
setting redundancy mode 2-327
RSPAN
adding interfaces or VLANs 2-329
deleting interfaces or VLANs 2-329
deleting session 2-329
displaying list 2-647
displaying session information 2-563
starting new session 2-329
RSTP+
configuring link type 2-669
running configuration
displaying current operating information 2-601
S
sampled NDE
disabling on an interface 2-279
enabling on an interface 2-279
sampled NetFlow Data Export
disabling globally 2-325
disabling on an interface 2-279
displaying
status 2-557
enabling globally 2-325
enabling on an interface 2-279
specifying
sampling method 2-325
saving configuration changes 1-11
SCP
disabling debugging 2-100
displaying information 2-603
enabling debugging 2-100
server load balancing
setting trusted port state 2-311
show commands
filter 1-7
search 1-7
single-character patterns
special characters
single-character patterns, table 1-7
SLB
displaying inband packet count 2-445
slot0
displaying information 2-604
SMF address insertions and deletions
debugging 2-101
disabling debugging 2-101
SNMP
ifIndex persistence
clearing previously interface configuration mode SNMP ifIndex commands 2-654
disabling globally 2-659
disabling on an interface 2-655
enabling globally 2-659
enabling on an interface 2-655
informs
disabling 2-657
enabling 2-657
traps
disabling 2-657
enabling 2-657
spanning tree
active states
displaying 2-607
configuring link type 2-669
disabling
activity debugging 2-102
BackboneFast 2-660
BackboneFast event debugging 2-103
BPDU filtering 2-661
BPDU guard 2-663
extended system ID display 2-667
loop guard as a default 2-670
loop guard mode 2-668
PortFast BPDU filtering 2-685
PortFast BPDU guard 2-687
PortFast by default 2-688
PortFast by default on all access ports 2-688
PortFast on an interface 2-683
root guard mode 2-668
UplinkFast debugging 2-106
displaying
active interfaces only 2-607
active states 2-607
BackboneFast status 2-607
bridge status and configuration 2-607
default path cost method 2-607
status information 2-607
status per VLAN 2-607
summary of interface information 2-607
UplinkFast status 2-607
enabling
activity debugging 2-102
BackboneFast 2-660
BackboneFast event debugging 2-103
BPDU filtering 2-661
BPDU guard 2-663
extended system ID display 2-667
loop guard as a default 2-670
loop guard mode 2-668
PortFast BPDU filtering 2-685
PortFast BPDU guard 2-687
PortFast by default 2-688
PortFast by default on all access ports 2-688
PortFast on an interface 2-683
root guard mode 2-668
UplinkFast debugging 2-106
EtherChannel
guard misconfiguration detection 2-666
interface
portfast mode, disabling 2-683
portfast mode, enabling 2-683
path cost
reverting to default 2-664
setting 2-664
port priority
reverting to default 2-689
setting 2-689
restarting protocol migration 2-48
setting default pathcost calculation method 2-682
UplinkFast
disabling 2-690
enabling 2-690
VLANs
configuring 2-692
reverting to defaults 2-692
SPAN session
adding interfaces or VLANs 2-329
deleting interfaces or VLANs 2-329
deleting session 2-329
displaying session information 2-563
starting new session 2-329
special characters
anchoring, table 1-10
SP QoS manager
static MAC address entries
clearing 2-36
static member, configuring 2-194
statistics data export
See MLS QoS statistics data export
statistics retrieval
setting interval 2-385
sticky-ARP
disabling on PVLANs 2-205
enabling on PVLANs 2-205
storm control
disabling suppression mode 2-705
enabling suppression mode 2-705
setting suppression level 2-705
stub
enabling non-RPF multicast fastdrop 2-266
subinterface configuration mode, summary 1-6
sup-bootflash
displaying file system information 2-617
switch console, accessing 2-373
switching, NetFlow
clearing statistics 2-32
setting cache size 2-177
switching characteristics
disabling
capture mode 2-711
enabling
capture function 2-711
modifying 2-707
capture function 2-713
optimizing port configuration for host connection 2-707
returning to interfaces
capture function 2-707
switching interface
displaying administrative and operational status 2-474
Switch-Module Configuration Protocol
switch ports
configuring
capture ports 2-711
voice VLANs 2-734
defining
PVLAN association 2-724
mapping
PVLANs for promiscuous port 2-726
modifying characteristics 2-707
port security
configuring aging time 2-720
disabling 2-719
displaying setting information 2-584
enabling 2-719
removing MAC address from list 2-721
setting maximum number of secured addresses 2-722
setting maximum secure MAC addresses 2-721
setting violation action 2-723
violation actions 2-723
removing
mapping PVLANs for promiscuous port 2-726
PVLAN mapping 2-724
voice VLAN 2-734
setting
mode 2-717
trunk characteristics 2-730
trunk Ethertype value 2-715
VLAN in access mode 2-709
specifying destination VLANs 2-713
switchports
disabling protocol filtering 2-728
modifying protocol filtering mode 2-728
switch reload 2-369
switch shim
debugging 2-104
disabling debugging 2-104
synchronizing supervisor engines 2-367
system prompts 1-5
system software
displaying names and sources of configuration files 2-628
displaying uptime since active 2-628
displaying version of 2-628
T
Tab key
command completion 1-1
table contention level
tables
characters with special meaning 1-7
class syntax description 2-344
command tokens 2-143
CoS-to-DSCP mapping table 2-291
default MTU values 2-336
detection mechanism types 2-174
DSCP-to-CoS default mapping table 2-292
IP-Precedence-to-DSCP default mapping 2-294
mac access-list extended subcommands 2-231
match syntax description 2-21
relationship between duplex and speed commands 2-134, 2-695, 2-696
show cable-diagnostics prbs 2-403
show cable-diagnostics prbs command output fields 2-403
show cable-diagnostics tdr 2-404
show ip cache flow command output fields—flow switching cache 2-482
show ip cache flow command output fields—NetFlow activity by protocol 2-483
show ip cache flow command output fields—packet size distribution 2-482
show ip cef inconsistency field descriptions 2-488
show ip mroute field descriptions 2-497
show ip wccp web-cache detail command output fields 2-501
show mls cef command output fields 2-520
show mls cef summary command output fields 2-533
show port flowcontrol command output fields 2-469
show tcam counts command output fields 2-621
show vlan command output fields 2-633
show vlan private-vlan command output fields 2-646
show vlans command output fields 2-649
show vtp command output fields 2-651
special characters
multipliers, table 1-9
special characters used for anchoring 1-10
speed command options 2-694
supported duplex command options 2-133
supported speed command options 2-695
time-based sampling intervals 2-325
TAC
displaying information 2-624
tag-to-tag load balancing
disabling 2-335
enabling 2-335
TCAM
debugging spanning tree activities 2-102
disabling debugging 2-113
displaying
interface-based information 2-622
protocol-based information 2-622
statistical information 2-620
enabling debugging 2-113
prioritizing interfaces 2-738
TCL
displaying MLS information 2-560
TDR
displaying cable diagnostic test results 2-404
running cable diagnostics 2-740
temperature readings
displaying information 2-429
Ternary Content Addressable Memory
time-based ACLs
configuring
time ranges 2-743
enabling 2-743
removing
time limitation 2-743
time domain reflectometry
time-range command 2-743
tracking
configuring
designated router 2-701
transmit-queue
setting size ratio 2-788
traps, enabling 2-657
troubleshooting
displaying information 2-624
trunk characteristics
adding VLANs 2-730
displaying information 2-477
removing VLANs 2-730
resetting to defaults 2-730
setting 2-730
trunks
setting
trunk Ethertype value 2-715
U
UDLD
aggressive mode
disabling globally on fiber interfaces only 2-745
disabling on an interface 2-747
enabling globally on fiber interfaces only 2-745
enabling on an interface 2-747
disabling debugging 2-114
disabling interface 2-747
enabling debugging 2-114
global configuration mode
enabling on fiber interfaces only 2-745
interface configuration mode
enabling on interface 2-747
resetting all ports shut down by UDLD 2-750
unicast entries
fast-aging time
configuring 2-246
restoring to defaults 2-246
long-aging time
configuring 2-247
restoring to defaults 2-247
normal-aging time
configuring 2-248
restoring to defaults 2-248
unicast flood protection
configuring 2-236
displaying information 2-516
Unidirectional Link Detection Protocol
user EXEC mode, summary 1-5
usernames
configuring 2-755
setting password 2-755
setting privilege level 2-755
V
VACL logging
configuring
logging parameters 2-768
logging threshold 2-768
log table size 2-768
parameters 2-768
redirect packet rate 2-768
disabling debugging 2-117
displaying
configuration information 2-635
flow table contents 2-635
logging property information 2-635
enabling debugging 2-117
log table size 2-768
redirect packet rate 2-768
returning to default logging values 2-768
returning to default values 2-768
threshold 2-768
VACLs
applying VLAN access maps 2-776
creating
VLAN access map 2-770
defining extended MAC access lists 2-231
disabling capture function 2-711
disabling debugging 2-116
enabling capture function 2-711
enabling debugging 2-116
entering
VLAN access-map mode 2-770
packet action
dropping 2-2
forwarding 2-2
redirecting 2-2
setting 2-2
specifying
access-map sequence 2-238
match clause 2-238
VLAN 1 minimalization
command 2-730
usage guideline 2-732
VLAN access control lists
VLAN access-map command mode
entering 2-770
VLAN database
entering 2-772
resetting 2-376
VLAN debugging
debugging 2-62
disabling debugging 2-62
VLAN manager
debugging 2-107
disabling debugging 2-107
IOS file system error tests
debugging 2-108
disabling debugging 2-108
VLANs
adding 2-763
clearing
counters 2-50
hardware logic 2-26
configuring 2-760
ARE hops 2-760
backup CRF mode 2-760
bridging characteristics 2-760
FDDI ring number 2-760
internal allocation scheme 2-778
media type 2-760
MTU size 2-760
parent VLAN ID 2-760
SAID identifier 2-760
state 2-760
STP type 2-760
Token Ring number 2-760
translational ID 2-760
VLAN name 2-760
config-VLAN submode
configuring 2-760
deleting 2-760
entering 2-760
specifying RSPAN 2-760
disabling
dot1q tagging 2-774
displaying
CEF information 2-490
CEF next-hop information 2-490
Cisco IOS VLAN subinterface information 2-648
configuration information 2-635
current operating information 2-601
dot1q tagging information 2-639
filter information 2-640
flow table contents 2-635
internal VLAN allocation information 2-642
internal VLAN status 2-631
Layer 2 VLAN information 2-631
logging property information 2-635
mapping 2-644
RSPAN VLANs 2-647
software-cached counter values 2-638
total number of interface VLANs 2-473
enabling
dot1q tagging 2-774
entering configuration mode 2-763, 2-772
erasing the VLAN database configuration file 2-135
implementing database 2-4
implementing new database 2-4
incrementing configuration number 2-4
mapping to ISL VLANs 2-780
mapping to MST instance 2-158
removing ISL VLAN mapping 2-780
restarting local traffic 2-653
shutting down local traffic 2-653
voice VLANs
configuring on switch ports 2-734
removing
from switch ports 2-734
VTP
client mode
setting 2-782
displaying
domain information 2-650
statistics information 2-650
domain name
setting 2-782
global configuration mode
setting domain name 2-782
setting IFS file 2-782
setting mode 2-782
setting preferred updater ID source 2-782
IFS file system
setting 2-782
password
specifying 2-782
preferred updater ID source
setting 2-782
pruning
disabling 2-782
enabling 2-782
server mode
setting 2-782
transparent mode
setting 2-782
version
setting 2-782
VTP domain
linking 2-324
removing 2-324
VTP protocol code
activating debug messages 2-111
deactivating debug messages 2-111
W
WAN
displaying bootflash information 2-415
displaying statistical information 2-415
displaying VLAN-to-WAN interface mapping 2-415
watch list
adding IP address 2-171
clearing entries 2-28
configuring 2-171
disabling 2-171
displaying 2-480
enabling 2-171
setting
maximum login attempts 2-170
WCCP
disabling
IP multicast packet reception 2-210
mask assignment hardware acceleration 2-213
packet redirection 2-212
displaying
global statistics 2-500
inband packet count 2-445
enabling
IP multicast packet reception 2-210
mask assignment hardware acceleration 2-213
packet redirection 2-212
Web Cache Coprocessor Protocol
weighted random early detection
weighted round robin
WRED
specifying maximum threshold 2-790
write erase command
See erase command 2-135
WRR
returning to default queue values 2-790
setting transmit queue size ratio 2-788
specifying maximum threshold 2-790