Catalyst 3750-E and 3560-E Switch System Message Guide, Cisco IOS Release 12.2(50)SE - Preface [Cisco Catalyst 3750-E Series Switches]

Table Of Contents

Preface

Audience

Purpose

Conventions

Related Publications

Obtaining Documentation and Submitting a Service Request

Preface

Audience

This guide is for the networking professional managing the Catalyst 3750-E or 3560-E switch or the
Catalyst 3750-E switch stack, known as the switch. Before using this guide, you should have experience working with the Cisco IOS software and the switch software features.

Purpose

This guide describes the Catalyst 3750-E or 3560-E switch or the Catalyst 3750-E switch stack-specific system messages that you might encounter. For a complete list of Cisco IOS system error messages, see the Cisco IOS Software System Error Messages, Cisco IOS Release 12.2 available from the Cisco.com home page by choosing Technical Support & Documentation > Documentation > Cisco IOS Software.

This guide does not describe how to install your switch or how to configure software features on your switch. It also does not provide detailed information about commands that have been created or changed for use by the switch. For hardware installation information, see the hardware installation guide that shipped with your switch. For software information, see the software configuration guide and the command reference for this release.

For documentation updates, see the release notes for this release.

Conventions

This publication uses these conventions to convey instructions and information:

Command descriptions use these conventions:

•Commands and keywords are in boldface text.

•Arguments for which you supply values are in italic.

•Square brackets ([ ]) mean optional elements.

•Braces ({ }) group required choices, and vertical bars ( | ) separate the alternative elements.

•Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional element.

Interactive examples use these conventions:

•Terminal sessions and system displays are in screen font.

•Information you enter is in boldface screen font.

•Nonprinting characters, such as passwords or tabs, are in angle brackets (< >).

Notes use this convention and symbol:

Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.

Related Publications

These documents provide complete information about the switch and are available from this Cisco.com site:

http://www.cisco.com/en/US/products/ps7077/tsd_products_support_series_home.html

Note Before installing, configuring, or upgrading the switch, see these documents:

•For initial configuration information, see the "Using Express Setup" chapter in the getting started guide or the "Configuring the Switch with the CLI-Based Setup Program" appendix in the hardware installation guide.

•For device manager requirements, see the "System Requirements" section in the release notes.

•For Network Assistant requirements, see the Getting Started with Cisco Network Assistant.

•For cluster requirements, see the Release Notes for Cisco Network Assistant.

•For upgrade information, see the "Downloading Software" section in the release notes.

These are combined documents for the switches:

•Release Notes for the Catalyst 3750-E and 3560-E Switches

•Catalyst 3750-E and 3560-E Switch Hardware Installation Guide

•Regulatory Compliance and Safety Information for the Catalyst 3750-E and 3560-E Switches

•Installation Note for the Catalyst 3750-E and Catalyst 3560-E Switches, and RPS 2300 Power Supply Modules

•Installation Note for the Catalyst 3750-E and 3560-E Switch Fan Modules

•Catalyst 3750-E and 3560-E Switch Software Configuration Guide

•Device manager online help (available on the switch)

•Getting Started Guide for the Catalyst 3750-E Switch

•Getting Started Guide for the Catalyst 3560-E Switch

•Catalyst 3750-E and 3560-E Switch Command Reference

See these documents for other information about the switches:

•Cisco Software Activation and Compatibility Document

•Getting Started with Cisco Network Assistant

•Release Notes for Cisco Network Assistant

•Cisco Redundant Power System 2300 Hardware Installation Guide

•Installation Note for the Cisco TwinGig Converter Module

•Cisco Small Form-Factor Pluggable Modules Installation Notes

•Cisco CWDM GBIC and CWDM SFP Installation Note

•For information about the Network Admission Control (NAC) features, see the Network Admission Control Software Configuration Guide

•Compatibility matrix documents

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

–Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix

–Cisco 100-Megabit Ethernet SFP Modules Compatibility Matrix

–Cisco Small Form-Factor Pluggable Modules Compatibility Matrix

–Compatibility Matrix for 1000BASE-T Small Form-Factor Pluggable Modules

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.

	Catalyst 3750-E and 3560-E Switch System Message Guide, Cisco IOS Release 12.2(50)SE
	Preface
Catalyst 3750-E and 3560-E Switch System Message Guide, Cisco IOS Release 12.2(50)SE Index Preface System Message Overview Messages and Recovery Procedures	Download this chapter Preface Download the complete book Catalyst 3750-E and 3560-E Switch System Message Guide, 12.2(50)SE (full-book PDF) (PDF - 2 MB) Feedback Table Of Contents Preface Audience Purpose Conventions Related Publications Obtaining Documentation and Submitting a Service Request Preface Audience This guide is for the networking professional managing the Catalyst 3750-E or 3560-E switch or the Catalyst 3750-E switch stack, known as the switch. Before using this guide, you should have experience working with the Cisco IOS software and the switch software features. Purpose This guide describes the Catalyst 3750-E or 3560-E switch or the Catalyst 3750-E switch stack-specific system messages that you might encounter. For a complete list of Cisco IOS system error messages, see the Cisco IOS Software System Error Messages, Cisco IOS Release 12.2 available from the Cisco.com home page by choosing Technical Support & Documentation > Documentation > Cisco IOS Software. This guide does not describe how to install your switch or how to configure software features on your switch. It also does not provide detailed information about commands that have been created or changed for use by the switch. For hardware installation information, see the hardware installation guide that shipped with your switch. For software information, see the software configuration guide and the command reference for this release. For documentation updates, see the release notes for this release. Conventions This publication uses these conventions to convey instructions and information: Command descriptions use these conventions: •Commands and keywords are in boldface text. •Arguments for which you supply values are in italic. •Square brackets ([ ]) mean optional elements. •Braces ({ }) group required choices, and vertical bars ( \| ) separate the alternative elements. •Braces and vertical bars within square brackets ([{ \| }]) mean a required choice within an optional element. Interactive examples use these conventions: •Terminal sessions and system displays are in `screen` font. •Information you enter is in boldface screen font. •Nonprinting characters, such as passwords or tabs, are in angle brackets (< >). Notes use this convention and symbol: Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual. Related Publications These documents provide complete information about the switch and are available from this Cisco.com site: http://www.cisco.com/en/US/products/ps7077/tsd_products_support_series_home.html Note Before installing, configuring, or upgrading the switch, see these documents: •For initial configuration information, see the "Using Express Setup" chapter in the getting started guide or the "Configuring the Switch with the CLI-Based Setup Program" appendix in the hardware installation guide. •For device manager requirements, see the "System Requirements" section in the release notes. •For Network Assistant requirements, see the Getting Started with Cisco Network Assistant. •For cluster requirements, see the Release Notes for Cisco Network Assistant. •For upgrade information, see the "Downloading Software" section in the release notes. These are combined documents for the switches: •Release Notes for the Catalyst 3750-E and 3560-E Switches •Catalyst 3750-E and 3560-E Switch Hardware Installation Guide •Regulatory Compliance and Safety Information for the Catalyst 3750-E and 3560-E Switches •Installation Note for the Catalyst 3750-E and Catalyst 3560-E Switches, and RPS 2300 Power Supply Modules •Installation Note for the Catalyst 3750-E and 3560-E Switch Fan Modules •Catalyst 3750-E and 3560-E Switch Software Configuration Guide •Device manager online help (available on the switch) •Getting Started Guide for the Catalyst 3750-E Switch •Getting Started Guide for the Catalyst 3560-E Switch •Catalyst 3750-E and 3560-E Switch Command Reference See these documents for other information about the switches: •Cisco Software Activation and Compatibility Document •Getting Started with Cisco Network Assistant •Release Notes for Cisco Network Assistant •Cisco Redundant Power System 2300 Hardware Installation Guide •Installation Note for the Cisco TwinGig Converter Module •Cisco Small Form-Factor Pluggable Modules Installation Notes •Cisco CWDM GBIC and CWDM SFP Installation Note •For information about the Network Admission Control (NAC) features, see the Network Admission Control Software Configuration Guide •Compatibility matrix documents http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html –Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix –Cisco 100-Megabit Ethernet SFP Modules Compatibility Matrix –Cisco Small Form-Factor Pluggable Modules Compatibility Matrix –Compatibility Matrix for 1000BASE-T Small Form-Factor Pluggable Modules Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks