Catalyst 2900 XL and Catalyst 3500 XL Software Configuration Guide, Release 12.0(5.x)WC1 - Preface [Cisco Catalyst 2900 Series LRE XL Switches]

Table Of Contents

Preface

Audience

Purpose

Organization

Conventions

Related Publications

Obtaining Documentation

World Wide Web

Cisco Documentation CD-ROM

Ordering Documentation

Documentation Feedback

Obtaining Technical Assistance

Cisco.com

Technical Assistance Center

Contacting TAC by Using the Cisco TAC Website

Contacting TAC by Telephone

Preface

Audience

The Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide is for the network manager responsible for configuring the Catalyst 2900 series XL and Catalyst 3500 series XL switches, hereafter referred to as the switches. Before using this guide, you should be familiar with the concepts and terminology of Ethernet and local area networking.

Purpose

This guide provides information about configuring and troubleshooting a switch or switch clusters. This guide also provides information about configuring the Cisco 575 Long-Reach Ethernet (LRE) customer premises equipment (CPE). It includes descriptions of the management interface options and the features supported by the switch software.

Use this guide in conjunction with other documents for the following topics:

•Requirements—This guide assumes you have met the hardware and software requirements and cluster compatibility requirements, as described in the release notes.

•Start up information—This guide assumes you have assigned switch IP information and passwords by using the setup program, which is described in the release notes.

•Cluster Management Suite (CMS) information—This guide provides an overview of the CMS web-based, switch management interface. For information about CMS requirements and the procedures for browser and plug-in configuration and accessing CMS, refer to the release notes. For CMS field-level window descriptions and procedures, refer to the CMS online help.

•Cluster configuration—This guide provides information about planning for, creating, and maintaining switch clusters. Because configuring switch clusters is most easily performed through CMS, this guide does not provide the command-line interface (CLI) procedures. For the cluster commands, refer to the Catalyst 2900 Series XL and Catalyst 3500 Series XL Command Reference.

•CLI command information—This guide provides an overview for using the CLI. For complete syntax and usage information about the commands that have been specifically created or changed for the Catalyst 2900 XL or Catalyst 3500 XL switches, refer to the Catalyst 2900 Series XL and Catalyst 3500 Series XL Command Reference.

Note This guide does not repeat the concepts and CLI procedures provided in the standard Cisco IOS Release 12.0 documentation. For switch features that use standard Cisco IOS Release 12.0 commands, refer to the Cisco IOS Release 12.0 documentation on Cisco.com for additional information and CLI procedures.

Organization

The organization of this guide is as follows:

"Overview," lists the software features of this release and provides examples of how the switch can be deployed in a network.

"Getting Started with CMS," describes the Cluster Management Suite (CMS) web-based, switch management interface. Refer to the release notes for the procedures for configuring your web browser and accessing CMS. Refer to the online help for field-level descriptions of all CMS windows and procedures for using the CMS windows.

"Getting Started with the CLI," describes the basics for using the Cisco IOS CLI.

"General Switch Administration," includes the switch-configuration default settings and information about software releases, accessing the management interfaces, and using Simple Network Management Protocol (SNMP).

"Clustering Switches," describes switch clusters and the considerations for creating and maintaining them. The online help provides the CMS procedures for configuring switch clusters. Cluster commands are described in the Catalyst 2900 Series XL and Catalyst 3500 Series XL Command Reference.

"Configuring the System," provides the considerations and CLI procedures for configuring switch-wide settings. The online help provides the CMS procedures for configuring switch-wide settings.

"Configuring the Switch Ports," provides the considerations and CLI procedures for configuring the switch ports. The online help provides the CMS procedures for configuring the switch ports.

"Configuring VLANs," provides the considerations and CLI procedures for configuring VLANs. The online help provides the CMS procedures for configuring VLANs.

"Troubleshooting," provides information about avoiding and resolving problems that might arise when you configure and maintain the switch.

"System Error Messages," lists the IOS system error messages for the switch.

Conventions

This guide uses the following conventions to convey instructions and information:

Command descriptions use these conventions:

•Commands and keywords are in boldface text.

•Arguments for which you supply values are in italic.

•Square brackets ([ ]) indicate optional elements.

•Braces ({ }) group required choices, and vertical bars ( | ) separate the alternative elements.

•Braces and vertical bars within square brackets ([{ | }]) indicate a required choice within an optional element.

Interactive examples use these conventions:

•Terminal sessions and system displays are in screen font.

•Information you enter is in boldface screen font.

•Nonprinting characters, such as passwords or tabs, are in angle brackets (< >).

Notes, cautions, and tips use the following conventions and symbols:

Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.

Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Tips Means the following will help you solve a problem. The tips information might not be troubleshooting or even an action, but could be useful information.

Related Publications

You can order printed copies of documents with a DOC-xxxxxx= number. See the "Ordering Documentation" section.

The following publications provide more information about the switches:

•Release Notes for the Catalyst 2900 Series XL and Catalyst 3500 Series XL Cisco IOS Release 12.0(5)WC(1) (not orderable but is available on Cisco.com)

•Cluster Management Suite (CMS) online help

•Catalyst 2900 XL and Catalyst 3500 XL Documentation CD (not orderable)

Note This product-specific CD contains only the Catalyst 2900 XL and Catalyst 3500 XL switch documents and related hardware documents. This CD is not the same as the Cisco Documentation CD-ROM, which contains the documentation for all Cisco products and is shipped with all Cisco products.

The Catalyst 2900 XL and Catalyst 3500 XL Documentation CD is shipped with the switch and has the following publications:

–This Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide, Cisco IOS Release 12.0(5)WC(1) (order number DOC-786511=)

–Catalyst 2900 Series XL and Catalyst 3500 Series XL Command Reference, Cisco IOS Release 12.0(5)WC(1) (order number DOC-7812155=)

–Catalyst 2900 Series XL Hardware Installation Guide (order number DOC-786461=)

–Catalyst 3500 Series XL Hardware Installation Guide (order number DOC-786456=)

–Catalyst 2900 Series XL Modules Installation Guide (order number DOC-CAT2900-IG=)

–Catalyst 2900 Series XL ATM Modules Installation and Configuration Guide (order number DOC-785472=)

–1000BASE-T Gigabit Interface Converter Installation Note (not orderable but is available on Cisco.com)

–Catalyst GigaStack Gigabit Interface Converter Hardware Installation Guide (order number DOC-786460=)

–Cisco 575 LRE CPE Hardware Installation Guide (order number DOC-7811469=)

Obtaining Documentation

The following sections provide sources for obtaining documentation from Cisco Systems.

World Wide Web

You can access the most current Cisco documentation on the World Wide Web at the following sites:

•http://www.cisco.com

•http://www-china.cisco.com

•http://www-europe.cisco.com

Cisco Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Cisco Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.

Note This CD contains the documentation for all Cisco products and is shipped with all Cisco products. This CD is not the same as the Catalyst 2900 XL and Catalyst 3500 XL Documentation CD, which contains only the Catalyst 2900 XL and Catalyst 3500 XL switch documents and related hardware documents.

Ordering Documentation

Cisco documentation is available in the following ways:

•Registered Cisco Direct Customers can order Cisco Product documentation from the Networking Products MarketPlace:

http://www.cisco.com/public/ordsum.html

•Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription Store:

http://www.cisco.com/go/subscription

•Nonregistered CCO users can order documentation through a local account representative by calling Cisco corporate headquarters (California, USA) at 408 526-7208 or, in North America, by calling 800 553-NETS(6387).

Documentation Feedback

If you are reading Cisco product documentation on the World Wide Web, you can send us your comments by completing the online survey. When you display the document listing for this platform, click Give Us Your Feedback. If you are using the product-specific CD and you are connected to the Internet, click the pencil-and-paper icon in the toolbar to display the survey. After you display the survey, select the manual that you wish to comment on. Click Submit to send your comments to the Cisco documentation group.

You can e-mail your comments to bug-doc@cisco.com.

To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:

Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Obtaining Technical Assistance

Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC website.

Cisco.com

Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.

Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online technical support, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.

Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.

To access Cisco.com, go to the following website:

http://www.cisco.com

Technical Assistance Center

The Cisco TAC website is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.

Contacting TAC by Using the Cisco TAC Website

If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to the TAC website:

http://www.cisco.com/tac

P3 and P4 level problems are defined as follows:

•P3—Your network performance is degraded. Network functionality is noticeably impaired, but most business operations continue.

•P4—You need information or assistance on Cisco product capabilities, product installation, or basic product configuration.

In each of the above cases, use the Cisco TAC website to quickly find answers to your questions.

To register for Cisco.com, go to the following website:

http://www.cisco.com/register/

If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following website:

http://www.cisco.com/tac/caseopen

Contacting TAC by Telephone

If you have a priority level 1 (P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following website:

http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml

P1 and P2 level problems are defined as follows:

•P1—Your production network is down, causing a critical impact to business operations if service is not restored quickly. No workaround is available.

•P2—Your production network is severely degraded, affecting significant aspects of your business operations. No workaround is available.

	Catalyst 2900 XL and Catalyst 3500 XL Software Configuration Guide, Release 12.0(5.x)WC1
	Preface
Catalyst 2900 XL and Catalyst 3500 XL Software Configuration Guide, Release 12.0(5.x)WC1 Preface Overview Getting Started with CMS Getting Started with the CLI General Switch Administration Clustering Switches Configuring the System Configuring the Switch Ports Configuring VLANs Troubleshooting System Error Messages Index	Download this chapter Preface Table Of Contents Preface Audience Purpose Organization Conventions Related Publications Obtaining Documentation World Wide Web Cisco Documentation CD-ROM Ordering Documentation Documentation Feedback Obtaining Technical Assistance Cisco.com Technical Assistance Center Contacting TAC by Using the Cisco TAC Website Contacting TAC by Telephone Preface Audience The Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide is for the network manager responsible for configuring the Catalyst 2900 series XL and Catalyst 3500 series XL switches, hereafter referred to as the switches. Before using this guide, you should be familiar with the concepts and terminology of Ethernet and local area networking. Purpose This guide provides information about configuring and troubleshooting a switch or switch clusters. This guide also provides information about configuring the Cisco 575 Long-Reach Ethernet (LRE) customer premises equipment (CPE). It includes descriptions of the management interface options and the features supported by the switch software. Use this guide in conjunction with other documents for the following topics: •Requirements—This guide assumes you have met the hardware and software requirements and cluster compatibility requirements, as described in the release notes. •Start up information—This guide assumes you have assigned switch IP information and passwords by using the setup program, which is described in the release notes. •Cluster Management Suite (CMS) information—This guide provides an overview of the CMS web-based, switch management interface. For information about CMS requirements and the procedures for browser and plug-in configuration and accessing CMS, refer to the release notes. For CMS field-level window descriptions and procedures, refer to the CMS online help. •Cluster configuration—This guide provides information about planning for, creating, and maintaining switch clusters. Because configuring switch clusters is most easily performed through CMS, this guide does not provide the command-line interface (CLI) procedures. For the cluster commands, refer to the Catalyst 2900 Series XL and Catalyst 3500 Series XL Command Reference. •CLI command information—This guide provides an overview for using the CLI. For complete syntax and usage information about the commands that have been specifically created or changed for the Catalyst 2900 XL or Catalyst 3500 XL switches, refer to the Catalyst 2900 Series XL and Catalyst 3500 Series XL Command Reference. Note This guide does not repeat the concepts and CLI procedures provided in the standard Cisco IOS Release 12.0 documentation. For switch features that use standard Cisco IOS Release 12.0 commands, refer to the Cisco IOS Release 12.0 documentation on Cisco.com for additional information and CLI procedures. Organization The organization of this guide is as follows: "Overview," lists the software features of this release and provides examples of how the switch can be deployed in a network. "Getting Started with CMS," describes the Cluster Management Suite (CMS) web-based, switch management interface. Refer to the release notes for the procedures for configuring your web browser and accessing CMS. Refer to the online help for field-level descriptions of all CMS windows and procedures for using the CMS windows. "Getting Started with the CLI," describes the basics for using the Cisco IOS CLI. "General Switch Administration," includes the switch-configuration default settings and information about software releases, accessing the management interfaces, and using Simple Network Management Protocol (SNMP). "Clustering Switches," describes switch clusters and the considerations for creating and maintaining them. The online help provides the CMS procedures for configuring switch clusters. Cluster commands are described in the Catalyst 2900 Series XL and Catalyst 3500 Series XL Command Reference. "Configuring the System," provides the considerations and CLI procedures for configuring switch-wide settings. The online help provides the CMS procedures for configuring switch-wide settings. "Configuring the Switch Ports," provides the considerations and CLI procedures for configuring the switch ports. The online help provides the CMS procedures for configuring the switch ports. "Configuring VLANs," provides the considerations and CLI procedures for configuring VLANs. The online help provides the CMS procedures for configuring VLANs. "Troubleshooting," provides information about avoiding and resolving problems that might arise when you configure and maintain the switch. "System Error Messages," lists the IOS system error messages for the switch. Conventions This guide uses the following conventions to convey instructions and information: Command descriptions use these conventions: •Commands and keywords are in boldface text. •Arguments for which you supply values are in italic. •Square brackets ([ ]) indicate optional elements. •Braces ({ }) group required choices, and vertical bars ( \| ) separate the alternative elements. •Braces and vertical bars within square brackets ([{ \| }]) indicate a required choice within an optional element. Interactive examples use these conventions: •Terminal sessions and system displays are in `screen` font. •Information you enter is in boldface screen font. •Nonprinting characters, such as passwords or tabs, are in angle brackets (< >). Notes, cautions, and tips use the following conventions and symbols: Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual. Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. Tips Means the following will help you solve a problem. The tips information might not be troubleshooting or even an action, but could be useful information. Related Publications You can order printed copies of documents with a DOC-xxxxxx= number. See the "Ordering Documentation" section. The following publications provide more information about the switches: •Release Notes for the Catalyst 2900 Series XL and Catalyst 3500 Series XL Cisco IOS Release 12.0(5)WC(1) (not orderable but is available on Cisco.com) •Cluster Management Suite (CMS) online help •Catalyst 2900 XL and Catalyst 3500 XL Documentation CD (not orderable) Note This product-specific CD contains only the Catalyst 2900 XL and Catalyst 3500 XL switch documents and related hardware documents. This CD is not the same as the Cisco Documentation CD-ROM, which contains the documentation for all Cisco products and is shipped with all Cisco products. The Catalyst 2900 XL and Catalyst 3500 XL Documentation CD is shipped with the switch and has the following publications: –This Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide, Cisco IOS Release 12.0(5)WC(1) (order number DOC-786511=) –Catalyst 2900 Series XL and Catalyst 3500 Series XL Command Reference, Cisco IOS Release 12.0(5)WC(1) (order number DOC-7812155=) –Catalyst 2900 Series XL Hardware Installation Guide (order number DOC-786461=) –Catalyst 3500 Series XL Hardware Installation Guide (order number DOC-786456=) –Catalyst 2900 Series XL Modules Installation Guide (order number DOC-CAT2900-IG=) –Catalyst 2900 Series XL ATM Modules Installation and Configuration Guide (order number DOC-785472=) –1000BASE-T Gigabit Interface Converter Installation Note (not orderable but is available on Cisco.com) –Catalyst GigaStack Gigabit Interface Converter Hardware Installation Guide (order number DOC-786460=) –Cisco 575 LRE CPE Hardware Installation Guide (order number DOC-7811469=) Obtaining Documentation The following sections provide sources for obtaining documentation from Cisco Systems. World Wide Web You can access the most current Cisco documentation on the World Wide Web at the following sites: •http://www.cisco.com •http://www-china.cisco.com •http://www-europe.cisco.com Cisco Documentation CD-ROM Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Cisco Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription. Note This CD contains the documentation for all Cisco products and is shipped with all Cisco products. This CD is not the same as the Catalyst 2900 XL and Catalyst 3500 XL Documentation CD, which contains only the Catalyst 2900 XL and Catalyst 3500 XL switch documents and related hardware documents. Ordering Documentation Cisco documentation is available in the following ways: •Registered Cisco Direct Customers can order Cisco Product documentation from the Networking Products MarketPlace: http://www.cisco.com/public/ordsum.html •Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription Store: http://www.cisco.com/go/subscription •Nonregistered CCO users can order documentation through a local account representative by calling Cisco corporate headquarters (California, USA) at 408 526-7208 or, in North America, by calling 800 553-NETS(6387). Documentation Feedback If you are reading Cisco product documentation on the World Wide Web, you can send us your comments by completing the online survey. When you display the document listing for this platform, click Give Us Your Feedback. If you are using the product-specific CD and you are connected to the Internet, click the pencil-and-paper icon in the toolbar to display the survey. After you display the survey, select the manual that you wish to comment on. Click Submit to send your comments to the Cisco documentation group. You can e-mail your comments to bug-doc@cisco.com. To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address: Cisco Systems, Inc. Document Resource Connection 170 West Tasman Drive San Jose, CA 95134-9883 We appreciate your comments. Obtaining Technical Assistance Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC website. Cisco.com Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco. Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online technical support, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available. Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco. To access Cisco.com, go to the following website: http://www.cisco.com Technical Assistance Center The Cisco TAC website is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract. Contacting TAC by Using the Cisco TAC Website If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to the TAC website: http://www.cisco.com/tac P3 and P4 level problems are defined as follows: •P3—Your network performance is degraded. Network functionality is noticeably impaired, but most business operations continue. •P4—You need information or assistance on Cisco product capabilities, product installation, or basic product configuration. In each of the above cases, use the Cisco TAC website to quickly find answers to your questions. To register for Cisco.com, go to the following website: http://www.cisco.com/register/ If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following website: http://www.cisco.com/tac/caseopen Contacting TAC by Telephone If you have a priority level 1 (P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following website: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml P1 and P2 level problems are defined as follows: •P1—Your production network is down, causing a critical impact to business operations if service is not restored quickly. No workaround is available. •P2—Your production network is severely degraded, affecting significant aspects of your business operations. No workaround is available.
	© 1992-2008 Cisco Systems, Inc. All rights reserved. Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks of Cisco Systems, Inc.