When you troubleshoot issues with Cisco DCNM or a device that it manages, you should follow the guidelines listed in the following table.
Table 1 Troubleshooting Guidelines
Check the release notes to see if the issue is a known problem.
The release notes are accessible through the Cisco DCNM Documentation Roadmap.
Take screenshots of the fault or error message dialog box, and other relevant areas.
These screenshots provide visual cues about the state of Cisco DCNM when the problem occurred. If your computer does not have software to take screenshots, check the documentation for your operating system, as it might include this functionality.
Record the steps that you took directly before the issue occurred.
If you have access to screen or keystroke recording software,
repeat the steps you took and record what occurs in Cisco DCNM.
If you do not have access to that type of software, repeat the
steps you took and make detailed notes of the steps and what
happens in Cisco DCNM after each step.
Create a technical support file.
The information about the current state of the Cisco DCNM instance is very helpful to Cisco support and frequently provides the information needed to identify the source of the problem.
Technical Support Files
When you encounter an issue that requires troubleshooting or a request for assistance to the Cisco Technical Assistance Center (TAC), collect as much information as possible about the affected Cisco DCNM instance.
To collect the server side log files, execute the following:
On Windows, execute $INSTALLDIR/dcm/fm/bin/techsupport.bat
On Linux, execute $INSTALLDIR/dcm/fm/bin/techsupport.sh
To collect client side log files, execute the following:
On Windows, zip the files under %USERPROFILE%/.cisco_mds9000/logs
On Linux, tar the files under tar cvf clientlog.tar $HOME/.cisco_mds9000/logs
Collecting Log Files
The default installation directory for Cisco DCNM-LAN and DCNM-SAN is:
Microsoft Windows– C:\Program Files\Cisco Systems
In Microsoft Windows, when a 32-bit installer is used to install on 64-bit environment, the default installation directory will be C:\Program Files <x86>\Cisco Systems.
<DCNM_HOME> is the installation location of Cisco DCNM.
Table 2 Installer Logs and Location
After the installation is complete, the installer logs are available:
On Microsoft Windows at <USER_HOME>\dcnm_installer.log
On Linux at /root/dcnm_installer.log
If you have multiple Cisco DCNM installations on the same system, the logs are stored with the timestamp. If you have installed Cisco DCNM using the Debug mode, the dcnm_installer.log is not created and you need to copy the console log to a text file for future reference.
After the installation is complete, the postgreSQL logs are available:
On Microsoft Windows at <USER_TEMP_DIR>\install-postgresql.log
On Linux at
DCNM-LAN and DCNM-SAN Sever Logs
After the installation and server startup is complete, the DCNM-LAN and DCNM_SAN server logs are available.
On Microsoft Windows at <DCNM_HOME>\dcm\jboss\server\dcnm\logs
On Linux at <DCNM_HOME>/dcm/jboss/server/dcnm/logs