Table Of Contents

New and Changed Information

New and Changed Information

---

This section provides release-specific information for each new and changed feature in the Cisco Nexus 7000 Series NX-OS MPLS Configuration Guide.

summarizes the new and changed features for the Cisco Nexus 7000 Series NX-OS MPLS Configuration Guide and tells you where they are documented.

Table 1 New and Changed Information for MPLS 

Feature	Description	Changed in Release	Where Documented
MPLS	Added support for M2 Series modules.	6.1(1)	Chapter 1 "Overview"
MPLS static label binding	Changed the maximum value for the MPLS static label range to 471804.	6.1(1)	Chapter 9 "Configuring MPLS Static Label Binding"
MVPNs	Added support for multicast GRE tunnel interfaces for PE-CE routing with MVPN.	6.1(1)	Chapter 24 "Configuring MVPNs"
MPLS	F2 Series modules do not support MPLS.	6.0(1)	Chapter 1 "Overview"
MPLS Layer 3 VPNs	Added matching and setting support for import maps on standard and extended communities for Cisco NX-OS Release 5.2(7) and later 5.2 releases.	5.2(7)	Chapter 21 "Configuring MPLS Layer 3 VPNs"
MPLS Layer 3 VPNs	Removed the MPLS license requirement for the EIGRP site of origin feature.	5.2(5)	Chapter 21 "Configuring MPLS Layer 3 VPNs"
MVPNs	Added support for multicast GRE tunnel interfaces for PE-CE routing with MVPN.	5.2(4)	Chapter 24 "Configuring MVPNs"
MPLS	MPLS was introduced as a feature of Cisco NX-OS software for Nexus 7000 Series switches.	5.2(1)