Table Of Contents
G Commands
This chapter describes the Cisco NX-OS Multiprotocol Label Switching commands that begin with G.
graceful-restart
To configure the graceful restart timer, use the graceful-restart command. To return to the default setting, use the no form of this command.
graceful-restart [timers {forwarding-holding seconds | max-recovery seconds | neighbor-liveness seconds}]
no graceful-restart [timers {forwarding-holding seconds | max-recovery seconds | neighbor-liveness seconds}]
Syntax Description
Defaults
Enable
Command Modes
LDP configuration mode
Supported User Rolesnetwork-admin
vdc-adminCommand History
Usage Guidelines
You must configure the MPLS VPN and VRFs before creating VRF-aware static labels.
This command requires the MPLS Services license.
Examples
This example shows how to configure the graceful restart timer:
switch(config-ldp)# configure terminal
switch(config)# mpls ldp configuration
switch(config-ldp)# graceful-restart timers forwarding-holding 30
switch(config-ldp)#Related Commands
Command Descriptionmpls ldp configuration
Configures the Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP).