Table Of Contents
New and Changed Information
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 7000 Series NX-OS Fundamentals Command Reference, Release 4.2 . The latest version of this document is available at the following Cisco website:http://www.cisco.com/en/US/products/ps9372/products_installation_and_configuration_guides_list.html
To check for additional information about Cisco NX-OS Release 4.2, see the Cisco NX-OS Release Notes available at the following Cisco website:http://www.cisco.com/en/US/products/ps9369/prod_release_notes_list.html
Cisco Nexus 7000 Series NX-OS Fundamentals Command Reference, Release 4.2 , and tells you where they are documented.
Table 1 New and Changed Information for Release 4.2
Feature
Change Description
Changed in Release
Where Documented
Installation failure log
You can clear the installation failure log on the standby supervisor module.
4.2(1)
clear install all failed-standby
Command syntax
You can display the syntax of available commands for the command mode.
4.2(1)
show cli syntax
Running configuration
You can exclude the configuration information for features when you display the running configuration.
4.2(1)
show running-config
Startup configuration
You can exclude the configuration information for features when you display the startup configuration.
4.2(1)
show startup-config
I/O module commands
You can send commands to an I/O module from the supervisor module session.
4.2(1)
slot
tar files
You can create and manage tar files.
4.2(1)
tar append tar create tar extract tar list
Command aliases
You can create aliases only for your user account.
4.2(1)
terminal alias
Terminal display colors
You can configure the colors of the information on the terminal session.
4.2(1)
terminal color
Command confirmation prompts
You can enable or disable the display of command confirmation prompts.
4.2(1)
terminal dont-ask
Command edit mode
You can set the command edit mode to emacs or vi.
4.2(1)
terminal edit-mode vi
Command history
You can exclude EXEC commands when you display the command history from a configuration mode.
4.2(1)
terminal history no-exec-in-config
Command logging
You can enable or disable logging all command in the accounting log.
4.2(1)
terminal log-all
Output redirection format
You can set the format of show command output to either ASCII or zipped.
4.2(1)
terminal redirection-mode
Licensing
You can specify the name of the file when you update a Cisco NX-OS software license.
4.2(1)
update license
Feedback