Table Of Contents

New and Changed Information

New and Changed Information

---

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 7000 Series NX-OS Unicast Routing Command Reference, Release 4.0. The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_0/nx-os/unicast/command/reference/l3_cmd_ref.html

To check for additional information about Cisco NX-OS Release 4.0, see the Cisco Nexus 7000 Series NX-OS Release Notes, Release 4.0s available at the following Cisco website:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_0/nx-os/release/notes/401_nx-os_release_note.html

summarizes the new and changed features for the Cisco Nexus 7000 Series NX-OS Unicast Routing Command Reference, Release 4.0, and tells you where they are documented.

Table 1 New and Changed Features for Release 4.0 

Feature	Description	Changed in Release	Where Documented
EIGRP	Removed eigrp keyword from graceful-restart, log-adjacency-changes, and log-neighbor-warnings commands. Replaced policy keyword with route-map keyword in show ip eigrp policy statistics and clear ip eigrp policy statistics redistribute commands. Removed nsf command. Added authentication key-chain (EIGRP and authentication mode (EIGRP) to support authentication in a VRF. Added the clear ip eigrp accounting and clear ip eigrp traffic commands.	4.0(3)	A Commands C Commands E Commands N Commands Show Commands
ARP	Added ip arp gratuitous command.	4.0(3)	I Commands
BGP local AS number	Added local-as command.	4.0(3)	L Commands
EIGRP maximum paths	Modified maximum-paths (EIGRP) command default to 8.	4.0(2)	M Commands