Table Of Contents

V Commands

verify

version 9

V Commands

---

This chapter describes the Cisco NX-OS system management commands that begin with the letter V.

verify

To verify the commands in the configuration session, use the verify command.

verify [verbose]

Syntax Description

verbose

(Optional) Verifies the current configuration session and displays more details on the results.

Defaults

None

Command Modes

Session configuration

Supported User Roles

network-admin
vdc-admin

Command History

Release	Modification
4.0(1)	This command was introduced.

Usage Guidelines

This command does not require a license.

Examples

This example shows how to verify a configuration session:

switch# configure session myACLs

switch(config-s)# verify 

switch(config-s)#

Related Commands

Command	Description
commit	Commits the commands in the configuration session.
abort	Deletes the session and exists session configuration mode.

version 9

To specify the export version 9 and enter the export version configuration mode, use the version 9 flow export configuration mode command.

version 9 {option option-type | template data} timeout seconds

no version 9 {option option-type | template data} timeout [seconds]

Syntax Description

exit	Exits from the current configuration mode.
no	Negates a command or sets its defaults.
option option-type	Specifies the version 9 option templates and data; valid values are as follows: •exporter-stats—Exporter statistics option •interface-table—Interface table option •sampler-table—Export sampler information
template data	Specifies the data template.

Command Default

Flow exporters are not present in the configuration until you create them.

Command Modes

Flow export configuration

Supported User Roles

network-admin
vdc-admin

Command History

Release	Modification
4.0(1)	This command was introduced.

Usage Guidelines

Flow exporters export the data in the flow monitor cache to a remote system, such as a server running NetFlow collector, for analysis and storage. Flow exporters are created as separate entities in the configuration. Flow exporters are assigned to flow monitors to provide data export capability for the flow monitors. You can create several flow exporters and assign them to one or more flow monitors to provide several export destinations. You can create one flow exporter and apply it to several flow monitors.

Once you enter the flow exporter configuration mode, the prompt changes to the following:

switch(config-flow-exporter)#

Within the flow exporter configuration mode, you can enter the version 9 keywords. Once you enter the version 9 keywords, the prompt changes to the following:

switch(config-flow-exporter-version-9)#

When entering the no form of this command, the seconds argument is optional.

This command does not require a license.

Examples

The following example shows how to specify the name of the flow exporter that is created or modified.

switch(config)# flow exporter flow-export-test

switch(config-flow-exporter)# version 9

switch(config-flow-exporter-version-9)# 

The following example shows how to specify the version 9 exporter statistics option templates and data; valid values are as follows:

switch(config)# flow exporter flow-export-test

switch(config-flow-exporter)# version 9

switch(config-flow-exporter-version-9)# exporter-stats

The following example shows how to specify the version 9 interface table option templates and data; valid values are as follows:

switch(config)# flow exporter flow-export-test

switch(config-flow-exporter)# version 9

switch(config-flow-exporter-version-9)# interface-table

The following example shows how to specify the version 9 interface table option templates and data; valid values are as follows:

switch(config)# flow exporter flow-export-test

switch(config-flow-exporter)# version 9

switch(config-flow-exporter-version-9)# sampler-table

The following example shows how to specify the option resend time in seconds:

switch(config)# flow exporter flow-export-test

switch(config-flow-exporter)# version 9

switch(config-flow-exporter-version-9)# timeout 32

The following example shows how to specify the data template:

switch(config)# flow exporter flow-export-test

switch(config-flow-exporter)# version 9

switch(config-flow-exporter-version-9)# template data

Related Commands

Command	Description
flow exporter	Creates a flow exporter.
flow monitor	Creates a flow monitor.
flow record	Creates a flow record.
sampler	Creates a flow sampler.