Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide, Release 4.0
New and Changed Information

Table Of Contents

New and Changed Information


New and Changed Information


This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide, Release 4.0. The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_0/nx-os/multicast/configuration/guide/multicast_cli.html

To check for additional information about Cisco NX-OS Release 4.0, see the Cisco NX-OS Release Notes available at the following Cisco website:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_0/nx-os/release/notes/401_nx-os_release_note.html

Table 1 summarizes the new and changed features for the Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide, Release 4.0, and tells you where they are documented.

Table 1 New and Changed Features for Release 4.0 

Feature
Description
Changed in Release
Where Documented

IGMP Snooping

The ip igmp snooping report-suppression command was modified to add global configuration mode.

4.0(3)

Configuring IGMP Snooping Parameters, page 4

MSDP

The ip msdp peer command was modified to make the AS number optional.

4.0(3)

Configuring MSDP, page 4