Table 1 New and Changed Features for Release 4.0
Feature
|
Description
|
Changed in Release
|
Where Documented
|
clear ip igmp interface statistics
|
New command to clear IGMP interface statistics.
|
4.0(3)
|
Chapter 1, "clear ip igmp interface statistics"
|
clear ip igmp snooping statistics vlan
|
Modified command allows selection of all VLANs.
|
4.0(3)
|
Chapter 1, "clear ip igmp snooping statistics vlan"
|
clear ip mroute
|
New command to clear multicast routes.
|
4.0(3)
|
Chapter 1, "clear ip mroute"
|
clear ip msdp route
|
Removed command.
|
4.0(3)
|
Chapter 1, "clear ip msdp route"
|
clear ip msdp sa-cache
|
Removed command.
|
4.0(3)
|
Chapter 1, "clear ip msdp sa-cache"
|
clear ip pim interface statistics
|
Modified command to make the interface argument optional.
|
4.0(3)
|
Chapter 1, "clear ip pim interface statistics"
|
clear ipv6 mroute
|
New command to clear the IPv6 multicast routing table.
|
4.0(3)
|
Chapter 1, "clear ipv6 mroute"
|
clear ipv6 pim interface statistics
|
Modified command to make interface optional.
|
4.0(3)
|
Chapter 1, "clear ipv6 pim interface statistics"
|
clear routing ipv6 multicast
|
New command to clear the IPv6 multicast routing table.
|
4.0(3)
|
Chapter 1, "clear routing ipv6 multicast"
|
clear routing multicast
|
New command to clear the IPv4 multicast routing table.
|
4.0(3)
|
Chapter 1, "clear routing multicast"
|
ip igmp snooping report-suppression
|
Modified command to add global confguration mode.
|
4.0(3)
|
Chapter 2, "ip igmp snooping report-suppression"
|
ip igmp snooping v3-report-suppression
|
New command to configure IGMPv3 report suppression and proxy reporting for VLANs.
|
4.0(3)
|
Chapter 2, "ip igmp snooping v3-report-suppression"
|
ip msdp peer
|
Modifed command to make the remote ASN an optional argument.
|
4.0(3)
|
Chapter 2, "ip msdp peer"
|
ip pim register-rate-limit
|
New command to configure the rate limit for PIM data registers.
|
4.0(3)
|
Chapter 2, "ip pim register-rate-limit"
|
ipv6 pim register-rate-limit
|
New command to configure the rate limit for PIM6 data registers.
|
4.0(3)
|
Chapter 2, "ipv6 pim register-rate-limit"
|
show ip netstack mroute
|
New command to show IPv4 multicast routes in the Network Stack cache.
|
4.0(3)
|
Chapter 4, "show ip netstack mroute"
|
