Contents

• New and Changed Information
• New and Changed Information

New and Changed Information

---

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000 Series NX-OS System Management Configuration Guide.

• New and Changed Information

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000 Series NX-OS System Management Configuration Guide.

The latest version of this document is available at the following Cisco website:

http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html

To check for additional information about a specific Cisco NX-OS Release, see the Cisco Nexus 5000 Series NX-OS Release Notes available at the following Cisco website:

http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html

This table summarizes the new and changed features documented in the Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 5.0(2)N1(1), and tells you where they are documented.
Table 1 New and Changed System Management Features for Cisco NX-OS Release 5.0(2)N1(1)

Feature	Description	Changed in Release	Where Documented
Switch Profiles	Added configuration information for the switch profiles feature.	5.0(2)N1(1)	Configuring Switch Profiles
Configuration Rollback	Added information on configuring the rollback feature.	5.0(2)N1(1)	Configuring Rollback
Pre-Provisioning	Added configuration information for configuring offline interfaces and modules using the pre-provision feature.	5.0(2)N1(1)	Configuring Pre-Provisioning
SPAN updates for the Cisco Nexus 5548 Switch	Updated information about source ports.	5.0(2)N1(1)	Configuring SPAN

This table summarizes the new and changed features documented in the Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 4.2(1)N1(1), and tells you where they are documented.
Table 2 New and Changed System Management Features for Cisco NX-OS Release 4.2(1)N1(1)

Feature	Description	Changed in Release	Where Documented
ACLs for SNMP Communities	Allows you to assign ACLs to a community to filter incoming SNMP requests.	4.2(1)N1(1)	Configuring SNMP

Documentation Organization

As of Cisco NX-OS Release 4.1(3)N2(1), the Cisco Nexus 5000 Series configuration information is available in new feature-specific configuration guides for the following information:

• System Management

• Layer 2 Switching

• SAN Switching

• Fibre Channel over Ethernet

• Security

• Quality of Service

The information in these new guides previously existed in the Cisco Nexus 5000 Series NX-OS Configuration Guide which remains available on Cisco.com and should be used for all software releases prior to Cisco Nexus 5000 NX-OS Software Rel 4.1(3). Each new configuration guide addresses the features that are introduced in or are available in a particular release. Select and view the configuration guide that pertains to the software installed in your switch.

The information in the new Cisco Nexus 5000 Series NX-OS Security Configuration Guide previously existed in Part 4: System Management of the Cisco Nexus 5000 Series NX-OS Configuration Guide.

For a complete list of Cisco Nexus 5000 Series document titles, see the list of Related Documentation in the "Preface."