Feedback
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000 Series NX-OS System Management Configuration Guide.
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 4.1(3)N2(1).
The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html
To check for additional information about Cisco NX-OS Release 4.2(1)N1(1), see the Cisco Nexus 5000 Series NX-OS Release Notes available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html
This table summarizes the new and changed features documented in the Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 4.2(1)N1(1), and tells you where they are documented.
Table 1 New and Changed System Management Features for Cisco NX-OS Release 4.2(1)N1(1)Feature
Description
Changed in Release
Where Documented
ACLs for SNMP Communities
Allows you to assign ACLs to a community to filter incoming SNMP requests.
4.2(1)N1(1)
Configuring SNMP
This table summarizes the new and changed features documented in the Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 4.1(3)N2(1), and tells you where they are documented.
Table 2 New and Changed System Management Features for Cisco NX-OS Release 4.1(3)N2(1)Feature
Description
Changed in Release
Where Documented
Logging with VRF option
Allows you to set up a logging server with a specific VRF.
4.1(3)N2(1)
Configuring syslog Servers
Documentation Organization
As of Cisco NX-OS Release 4.1(3)N2(1), the Cisco Nexus 5000 Series configuration information is available in new feature-specific configuration guides for the following information:
System Management
Layer 2 Switching
SAN Switching
Fibre Channel over Ethernet
Security
Quality of Service
The information in these new guides previously existed in the Cisco Nexus 5000 Series CLI Configuration Guide which remains available on Cisco.com and should be used for all software releases prior to Cisco Nexus 5000 NX-OS Software Rel 4.1(3). Each new configuration guide addresses the features that are introduced in or are available in a particular release. Select and view the configuration guide that pertains to the software installed in your switch.
The information in the new Cisco Nexus 5000 Series NX-OS Security Configuration Guide previously existed in Part 4: System Management of the Cisco Nexus 5000 Series CLI Configuration Guide.
For a complete list of Cisco Nexus 5000 Series document titles, see the list of Related Documentation in the "Preface."