Feedback
Table Of Contents
System Messages and Recovery Procedures for the Cisco Nexus 4000 Family
LC_PORT_CHANNEL-SLOT# Messages
System Messages and Recovery Procedures for the Cisco Nexus 4000 Family
This chapter includes system messages for the Cisco NX-OS Nexus 4000 family of switches. The messages are listed in alphabetical order by the system facility that produces them. Within each system facility section, messages are listed alphabetically by severity and mnemonics. Each error message is followed by an explanation and a recommended action.
AAA Messages
This section contains the AAA messages.
AAA-1
Error Message AAA-1-AAA_SESSION_LIMIT_REJECT: aaa request rejected as maximum aaa sessions are in progressExplanation An AAA request has been rejected because the system has detected that the limit for the maximum concurrent AAA sessions has been exceeded.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
AAA-2
Error Message AAA-2-AAA_NVRAM_UPGRADE_FAILURE: upgrading of accounting log failed. [chars]Explanation The system has detected that the accounting log upgrade has failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message AAA-2-AAA_PROGRAM_EXIT: aaa daemon exiting: [chars]Explanation The system has detected that the AAA daemon has exited.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
AAA-3
Error Message AAA-3-AAA_NVRAMFAILURE: nvram failureExplanation The system has detected that because the NVRAM cannot be read/written to, the accounting log cannot be stored in NVRAM.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
AAA-6
Error Message AAA-6-AAA_ACCOUNTING_MESSAGE: [chars]Explanation This message indicates that this is an accounting message.
Recommended Action No action is required.
ACL Messages
This section contains the ACL messages.
ACL-2
Error Message ACL-2-ACL_HA_FAILURE: Failed to do high availability operation: [chars].Explanation The system has failed to do a high availability operation. [chars] is the reason.
Recommended Action No action is required.
Error Message ACL-2-ACL_INIT_FAILED: Initialization failed for ACL: [chars], reason: [hex].Explanation Initialization failed for ACL due to [chars], reason: [hex].
Recommended Action No action is required.
Error Message ACL-2-ACL_LINECARD_STATUS: Status from linecard: [dec], for module: [chars](ID: [dec]), status : [dec], error_id: [hex], catastrophic: [chars], restart count: [dec].Explanation This message indicates that this message is a status from the line card [dec], for module: [chars](ID: [dec]), status : [dec], error_id: [hex], catastrophic: [chars], restart count: [dec].
Recommended Action No action is required.
Error Message ACL-2-ACL_MTS_FAILURE: Failed to do MTS operation: [chars].Explanation The system has failed to do an MTS operation. [chars] is the reason.
Recommended Action No action is required.
Error Message ACL-2-ACL_MTS_REGISTRATION_FAILED: MTS options setting to [hex] failed for opCode: [dec].Explanation The MTS options setting to [hex] failed for opCode: [dec].
Recommended Action No action is required.
Error Message ACL-2-ACL_PENDING_MSG_ARR_FULL: ACL Upgrade Pending Messages Array is Full with [dec] messages. Failing the MTS message with Opc: [dec], RR_TOKEN: [hex]Explanation This message indicates that the ACL upgrade pending messages array is full with [dec] messages. Failing the MTS message with Opc: [dec], RR_TOKEN: [hex].
Recommended Action No action is required.
Error Message ACL-2-ACL_PSS_FAILURE: Failed to do PSS operation: [chars], reason: [hex].Explanation The system has failed to do a PSS operation [chars]. [hex] is the reason.
Recommended Action No action is required.
Error Message ACL-2-ACL_PSS_VER_FAIL: PSS file [chars] has version [dec].[dec].[dec], expected version [dec].[dec].[dec].Explanation There was a mismatch in the PSS version. [chars] indicates the PSS service, [dec].[dec].[dec] its current version number and [dec].[dec].[dec] is the expected version.
Recommended Action No action is required.
Error Message ACL-2-ACL_RUNTIME_FAILURE: [chars] [dec], Error: [hex]Explanation The system detects than an ACL runtime failure has occurred as [chars] [dec], reason: [hex].
Recommended Action No action is required.
Error Message ACL-2-ACL_TCAM_FAILURE: Failed to do TCAM operation: [chars].Explanation The system has failed to do a TCAM operation. [chars] is the reason.
Recommended Action No action is required.
ACL-4
Error Message ACL-4-ACL_WARNING: [chars] [dec]Explanation ACL warning messages are reported as [chars] [dec].
Recommended Action No action is required.
ACL-5
Error Message ACL-5-ACL_ADJ_SHARING_STATUS: Successfully completed [chars] on Generation 2 linecards.Explanation Successfully completed the command \[chars]\ on Generation 2 line cards.
Recommended Action No action is required.
ACL-6
Error Message ACL-6-ACL_DIAG_EVENT_STATUS: [chars] [hex].Explanation ACL system health management event status is reported as [chars] [hex].
Recommended Action No action is required.
Error Message ACL-6-ACL_E_PORT_EVENT_STATUS: [chars] [chars].Explanation ACL E port event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_FCC_EVENT_STATUS: [chars] [chars].Explanation ACL FCC event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_LINECARD_EVENT_STATUS: [chars] [hex].Explanation ACL line card event status is reported as [chars] [dec].
Recommended Action No action is required.
Error Message ACL-6-ACL_MCAST_EVENT_STATUS: [chars] [chars].Explanation ACL multicast event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_NX_PORT_EVENT_STATUS: [chars] [chars].Explanation ACL Nx Port event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_PORT_MODE_EVENT_STATUS: [chars] [chars].Explanation ACL portmode event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_RUNTIME_STATUS: [chars] [dec]Explanation ACL runtime status is reported as [chars] [dec].
Recommended Action No action is required.
Error Message ACL-6-ACL_SPAN_DEST_CONFIG_STATUS: [chars] [chars].Explanation ACL SPAN destination config event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_SPAN_SRC_CONFIG_STATUS: [chars] [chars].Explanation ACL SPAN source configuration event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_STATUS: ACL Status: [chars].Explanation ACL status is reported as [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_UPDATE_SSRAM_QOS_EVENT_STATUS: [chars] [chars].Explanation ACL update SSRAM for QoS event status is reported as [chars] [chars].
Recommended Action No action is required.
ACLLOG Messages
This section contains the ACLLOG messages.
ACLLOG-4
Error Message ACLLOG-4-ACLLOG_MAXFLOW_REACHED: [chars]Explanation The maximum flow has been reached in current interval: [chars].
Recommended Action No action is required.
Error Message ACLLOG-4-ACLLOG_THRESHOLD: [chars]Explanation Threshold Reached for Flow: [chars].
Recommended Action No action is required.
ACLLOG-6
Error Message ACLLOG-6-ACLLOG_FLOW_INTERVAL: [chars]Explanation Flow informationin current alert interval: [chars].
Recommended Action No action is required.
Error Message ACLLOG-6-ACLLOG_NEW_FLOW: [chars]Explanation New Acllog Flow: [chars].
Recommended Action No action is required.
ACLMGR Messages
This section contains the ACLMGR messages.
ACLMGR-2
Error Message ACLMGR-2-ACLMGR_COMMIT_FAIL: Commit failed: client %llX, [chars]Explanation The PPF commit failed.
Recommended Action No action is required.
Error Message ACLMGR-2-ACLMGR_NO_ERRDISABLED: [chars] event on interface [chars] ([hex]) allowed to succeed in spite of access-list failureExplanation Although an access-list operation failed during a port event, the port event still finished successfully because errordisable is disallowed.
Recommended Action No action is required.
Error Message ACLMGR-2-EXITING: Exit reason: [chars]Explanation The ACLMGR service process has exited due to [char]. The process has probably been restarted automatically.
Recommended Action No action is required.
Error Message ACLMGR-2-INITFAIL: ACLMGR Service Init failed: [chars]Explanation ACLMGR Service initialization failed. [chars] explains the reason for the failure.
Recommended Action No action is required.
Error Message ACLMGR-2-MALLOC_ERROR: Size [dec] bytesExplanation The ACLMGR service could not allocate enough memory.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLMGR-2-PSS_ERROR: [chars]: PSS ret. val=[dec]Explanation The ACLMGR service encountered an error while operating on a persistent storage database.
Recommended Action No action is required.
ACLMGR-3
Error Message ACLMGR-3-ACLMGR_PPF_ERROR: PPF error: [chars]Explanation The PPF generated an error.
Recommended Action No action is required.
Error Message ACLMGR-3-ACLMGR_PSS_CORRUPTED: [chars] PSS found corruptedExplanation The ACLMGR service has detected a corrupted file in its persistent information databases The database would be recreated.
Recommended Action No action is required.
Error Message ACLMGR-3-ACLMGR_STAT_CONSOLIDATION_FAILURE: ACL statistic parsing or consolidation failedExplanation A statistic update failed during the parsing or consolidation step; statistics may have been lost.
Recommended Action No action is required.
Error Message ACLMGR-3-ACLMGR_VACL_REDIRECTION_DISABLED_REMOVAL: VACL redirection to interface [chars] ([hex]) disabled: the port has been removedExplanation A VACL redirection to the port has been deactivated because the port has been removed.
Recommended Action No action is required.
Error Message ACLMGR-3-ACLMGR_VERIFY_FAIL: Verify failed: client %llX, [chars]Explanation The PPF Verify failed.
Recommended Action No action is required.
Error Message ACLMGR-3-MTSERROR: [chars]Explanation ACLMGR Service encountered an MTS error. [chars] specifies the context where the error occurred.
Recommended Action No action is required.
ACLMGR-4
Error Message ACLMGR-4-ACLMGR_ACL_OVER_FAB_CHANNEL: ACL on FEX fabric port-channel bound interface not activatedExplanation ACL applied to a FEX interface is not activated if the interface is bound to a FEX-fabric port channel.
Recommended Action No action is required.
Error Message ACLMGR-4-ACLMGR_PPF_WARNING: PPF warning: [chars]Explanation The PPF generated warning.
Recommended Action No action is required.
Error Message ACLMGR-4-ACLMGR_VACL_REDIRECTION_DISABLED_PCM: VACL redirection to interface [chars] ([hex]) disabled: the port became a portchannel memberExplanation A VACL redirection to the port has been temporarily deactivated because it is now a member in a port channel.
Recommended Action No action is required.
Error Message ACLMGR-4-PSS_VERSION_MISMATCH: PSS [dec] Code [dec]Explanation There was a version mismatch between the ACLMGR service and one of its persistent storage databases. The persistent information has been translated to the new format.
Recommended Action No action is required.
ACLMGR-6
Error Message ACLMGR-6-ACLMGR_PPF_NOTIF: PPF notification: [chars]Explanation The PPF generated a notification.
Recommended Action No action is required.
Error Message ACLMGR-6-BECAME_ACTIVE: Became ACTIVE from standby modeExplanation The ACLMGR service on the standby supervisor became active and it is ready to serve client requests.
Recommended Action No action is required.
Error Message ACLMGR-6-BECAME_STDBY: Became STANDBY from active modeExplanation The ACLMGR service became standby from active mode.
Recommended Action No action is required.
Error Message ACLMGR-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system manager: Reason=[chars]Explanation The ACLMGR service was unable to send heartbeats to the system manager.
Recommended Action No action is required.
Error Message ACLMGR-6-SERVICE_UP: Initialized [chars]Explanation The ACLMGR service is up and ready The service was initialized in [char] mode.
Recommended Action No action is required.
Error Message ACLMGR-6-SRVEXIT: ACLMGR Service shutting down gracefullyExplanation ACLMGR Service is shutting down gracefully.
Recommended Action No action is required.
Error Message ACLMGR-6-SWITCHOVER: Switching Over to other Sup.Explanation The ACLMGR service has successfully switched over to the standby supervisor module.
Recommended Action No action is required.
ACLQOS-SLOT# Messages
This section contains the ACLQOS-SLOT# messages.
ACLQOS-SLOT#-2
Error Message ACLQOS-SLOT#-2-ACLQOS_FAILED: ACLQOS failure: [chars]Explanation ACLQOS operation failed in the aclqos client.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-2-ACLQOS_INBAND_INTERFACE_FAILURE: Inband interface lif lookup failed ([chars])Explanation Inband interface lif lookup failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-2-ACLQOS_MALLOC_FAILED: Memory allocation failed. [chars]Explanation Memory allocation failed. This is a critical failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-2-ACLQOS_OOTR: Tcam resource exhausted: [chars]Explanation TCAM resources to program acls exhausted.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-2-PPF_FAILED: Database failure: [chars]Explanation Database operation failed in the aclqos client.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
ACLQOS-SLOT#-3
Error Message ACLQOS-SLOT#-3-ACLQOS_CC_INVALID: Invalid Congestion Control parametersExplanation Invalid Congestion Control parameters.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-3-ACLQOS_PAUSE_INVALID: Invalid Pause parametersExplanation Invalid Pause parameters.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-3-ACLQOS_QUEUING_ERROR: ACL/QoS queuing error: [chars]Explanation Internal error in ACL/QoS queing configuration.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
ACLQOS-SLOT#-4
Error Message ACLQOS-SLOT#-4-ACLQOS_ATOMIC_ERR: [chars]Explanation TCAM will be overused, turn off atomic update.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-4-ACLQOS_OVER_THRESHOLD: Tcam [dec] Bank [dec]'s usage has reached its thresholdExplanation TCAM is almost full.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-4-ACLQOS_QUEUING_COS2Q_INVALID: ACL/QoS invalid queuing policy because of cos map change: [chars] queue [chars], interface [chars]Explanation Attemped to configure an invalid queuing policy.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-4-ACLQOS_QUEUING_INVALID: ACL/QoS invalid queuing policy: [chars]Explanation Attemped to configure an invalid queuing policy.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-4-ACLQOS_UNDER_THRESHOLD: Tcam [dec] Bank [dec]'s usage is below the threshold nowExplanation TCAM's usage is below the threshold.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
ACLQOS-SLOT#-5
Error Message ACLQOS-SLOT#-5-ACLQOS_DISRUPTIVE_IPv6_UPDATE: Disruptive update of IPv6 compression entriesExplanation Disruptive IPv6 compression entries update.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy update done for [chars]Explanation Nonatomic ACL/QoS policy update was done.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
ACLTCAM Messages
This section contains the ACLTCAM messages.
ACLTCAM-2
Error Message ACLTCAM-2-ACL_TCAM_CONFIG_READ_FROM_DRIVER_FAILED: [chars] [dec], Error: [hex].Explanation The system is unable to read the configuration from the forwarding engine ASIC driver. [chars] [dec], Error: 0x[hex].
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_CONFIG_WRITE_TO_DRIVER_FAILED: [chars] [dec], Error: [hex].Explanation The system is unable to write the configuration to the forwarding engine ASIC driver. [chars] [dec], Error: 0x[hex].
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_INCONSISTENT_DATABASE: Database found inconsistent.Explanation Database found inconsistent.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_INCONSISTENT_TCAM_CONTENTS: TCAM contents found inconsistent.Explanation TCAM contents are found inconsistent.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_INIT_FAILED: Initialization failed for forwarding engine ASIC: [dec], [chars] TCAM.Explanation Initialization failed for the forwarding engine ASIC [dec], in [chars] TCAM.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_INIT_REGIONS_FAILED: Initialization failed for forwarding engine ASIC: [dec], [chars] TCAM, [chars] Region.Explanation Initialization of regions failed for the forwarding engine ASIC [dec], in [chars] TCAM, for [chars] Region.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_MALLOC_FAILURE: Memory allocation failed for size [dec].Explanation Memory allocation is failed for size [dec] bytes.
Recommended Action Restart the process.
Error Message ACLTCAM-2-ACL_TCAM_MTS_FAILURE: MTS operation failed: [chars].Explanation MTS operation failed. [chars] is the reason.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_MTS_REGISTRATION_FAILED: MTS registration failed for opCode: [dec].Explanation MTS registration failed for opCode: [dec].
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_NO_ROUTE: ACLTCAM failed to get route for VSAN: [dec], Rewrite: [chars] DID: [chars] DID MASK: [chars], error: [hex].Explanation ACLTCAM process experienced a failure while getting route for VSAN [dec] Rewrite [chars] DID [chars] DID Mask [chars]. [hex] is the error code.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_NO_TCAM_LEFT: ACLTCAM resource exhausted for interface : [chars]Explanation ACLTCAM hardware resource is completely used.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_READ_FAILED: [chars] read from hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec], Error: [chars]).Explanation [chars] read from hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec] Error: [chars]).
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_READ_INVALID: Invalid([chars], value: [dec]) TCAM entry read from hardware TCAM (FWD-Engine: [dec], [chars] TCAM, Address: [dec]), Ignoring this entry.Explanation Invalid([chars], value: [dec]) TCAM entry from hardware TCAM(FWD-Engine: [dec], [chars] TCAM, Address: [dec]) Ignoring this entry.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_WRITE_FAILED: [chars] write to hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec], Error: [chars]).Explanation [chars] write to hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec] Error: [chars]).
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_PSS_FAILURE: Failed to do PSS operation: [chars], reason: [hex].Explanation The system has failed to do a PSS operation [chars]. [hex] is the reason.
Recommended Action No action is required.
Error Message ACLTCAM-2-PSS_OPEN_FAILED: PSS open failed - [hex].Explanation Persistent database handle could not be obtained for ACLTCAM. [hex] is the error.
Recommended Action No action is required.
Error Message ACLTCAM-2-RECONS_FAILED: Reconstruction of TCAM contents failed during upgrade - [hex].Explanation During nondisruptive upgrade, the ACLTCAM contents are not properly reconstructed. [hex] is the error.
Recommended Action No action is required.
ACLTCAM-3
Error Message ACLTCAM-3-REGISTER_FAILED: Could not register to MTS opcode [chars] - error [hex].Explanation ACLTCAM process could not register to the notifications mentioned by [chars]. [hex] is the error.
Recommended Action No action is required.
ACLTCAM-4
Error Message ACLTCAM-4-ACL_TCAM_FLOW_COUNTER_INVALIDATED: Flow counter for flow: vsan: [dec], sid: [hex], did: [hex] with statistics: frames = %llu & bytes = %llu was invalidated due to: [chars]Explanation ACLTCAM process invalidated the flow counter for flow VSAN [dec] SID [hex] DID [hex] with collected stats of [dec] frames and [dev] bytes was invalidated because of reason [[chars]].
Recommended Action No action is required.
Error Message ACLTCAM-4-ACL_TCAM_FLOW_COUNTER_VALIDATED: Flow counter for flow: vsan: [dec], sid: [hex], did: [hex] is now validExplanation ACLTCAM process validated the flow counter for flow VSAN [dec] SID [hex] DID [hex].
Recommended Action No action is required.
ACLTCAM-6
Error Message ACLTCAM-6-ACL_TCAM_STATUS: Status: [chars].Explanation ACLTCAM status is reported as: [chars].
Recommended Action No action is required.
ASCII-CFG Messages
This section contains the ASCII-CFG messages.
ASCII-CFG-2
Error Message ASCII-CFG-2-ACFG_CONFIGURATION_APPLY_ERROR: Error encountered while Ascii configuration was being applied. Please use show startup-config log to view detailsExplanation At least one command failed while the ASCII configuration was being applied.
Recommended Action No action is required.
Error Message ASCII-CFG-2-ACFG_LIB_INVOKE_ERR: Ascii config library invocation error: [chars]Explanation The system has encountered an error while the library function was being invoked to display the ASCII configuration.
Recommended Action No action is required.
Error Message ASCII-CFG-2-ACFG_ROLLBACK_FAILED: Rollback to checkpoint [chars] Failed, Going to undo the changes (atomic option)Explanation Rollback operation failed for atomic option.
Recommended Action No action is required.
Error Message ASCII-CFG-2-ACFG_ROLLBACK_UNDO_FAILED: Undo failed for atomic Rollback, Please correct the error manually and retry rollbackExplanation The system has encountered an error while undoing the rollback changes (for atomic behavior.
Recommended Action No action is required.
Error Message ASCII-CFG-2-ACFG_SYSLOG_INIT_FAILED: Ascii config Syslog Init ErrorExplanation The system has encountered an error while initializing the syslog for the ASCII configuration.
Recommended Action No action is required.
ASCII-CFG-3
Error Message ASCII-CFG-3-ACFG_MTSERROR: [chars]Explanation Ascii-cfg-server (rollback process) encountered an MTS error. [chars] specifies the context where the error occurred.
Recommended Action No action is required.
ASCII-CFG-6
Error Message ASCII-CFG-6-ACFG_CHECKPOINT_CLEAR_DATABASE: cleared all the configuration checkpointsExplanation The system has cleared all the configuration checkpoints.
Recommended Action No action is required.
Error Message ASCII-CFG-6-ACFG_CHECKPOINT_CREATED: Created configuration checkpoint [chars]Explanation The system has created a configuration checkpoint.
Recommended Action No action is required.
Error Message ASCII-CFG-6-ACFG_CHECKPOINT_DELETED: Deleted configuration checkpoint [chars]Explanation The system has deleted the configuration checkpoint.
Recommended Action No action is required.
Error Message ASCII-CFG-6-ACFG_MAX_CHECKPOINTS: Maximum no of checpoints reached, Removing the oldest checkpointExplanation The system detects that the maximum number of checkpoints has been reached and has removed the oldest checkpoint.
Recommended Action No action is required.
Error Message ASCII-CFG-6-ACFG_ROLLBACK_ATOMIC: Performing configuration rollback to checkpoint [chars] (with atomic option)Explanation The system will perform a configuration rollback with the atomic option.
Recommended Action No action is required.
Error Message ASCII-CFG-6-ACFG_ROLLBACK_BEST: Performing configuration rollback to checkpoint [chars] (with best-effort option)Explanation The system will perform a configuration rollback with the best-effort option.
Recommended Action No action is required.
Error Message ASCII-CFG-6-ACFG_ROLLBACK_FIRST_ERR: Performing configuration rollback to checkpoint [chars] (with stop-at-first failure option)Explanation The system will perform a configuration rollback with the stop-at-first-failure option.
Recommended Action No action is required.
BIOS_DAEMON Messages
This section contains the BIOS_DAEMON messages.
BIOS_DAEMON-2
Error Message BIOS_DAEMON-2-BIOS_DAEMON_FLASH_WARNING: Flash chip not supported by running image. Skipping bios upgrade.Explanation BIOS CHIP NOT SUPPORTED.
Recommended Action No action is required.
Error Message BIOS_DAEMON-2-BIOS_DAEMON_PRI_BOOT_FAIL: Primary BIOS is corrupted or un-bootableExplanation The system detects that the primary BIOS has been corrupted.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message BIOS_DAEMON-2-BIOS_DAEMON_SUP_ERROR: BIOS Sector ([dec]) is write protectedExplanation The system detects that the BIOS write has been protected.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
BIOS_DAEMON-SLOT# Messages
This section contains the BIOS_DAEMON-SLOT# messages.
BIOS_DAEMON-SLOT#-2
Error Message BIOS_DAEMON-SLOT#-2-BIOS_DAEMON_LC_ERROR: BIOS Sector ([dec]) is write protectedExplanation The system detects that the BIOS write has been protected.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message BIOS_DAEMON-SLOT#-2-BIOS_DAEMON_LC_PRI_BOOT_FAIL: Primary BIOS is corrupted or un-bootableExplanation The system detects that the primary BIOS has been corrupted.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
BOOTUP_TEST Messages
This section contains the BOOTUP_TEST messages.
BOOTUP_TEST-2
Error Message BOOTUP_TEST-2-EOBC_FAIL: Module [dec] has failed test [chars] on EOBC due to error [chars]Explanation The online diagnostic EOBC test has failed.
Recommended Action No action is required.
Error Message BOOTUP_TEST-2-EOBC_SKIP: Module [dec] has failed test [chars] on EOBC due to error [chars]Explanation The online diagnostic ManagementPort test has failed.
Recommended Action No action is required.
Error Message BOOTUP_TEST-2-MGMT_PORT_FAIL: Module [dec] has failed test [chars] on Management Port due to error [chars]Explanation The online diagnostic ManagementPort test has failed.
Recommended Action No action is required.
Error Message BOOTUP_TEST-2-MGMT_PORT_SKIP: Module [dec] has skipped test [chars] on Management Port due to error [chars]Explanation The online diagnostic ManagementPort test is skipped.
Recommended Action No action is required.
BOOTVAR Messages
This section contains the BOOTVAR messages.
BOOTVAR-2
Error Message BOOTVAR-2-ALLOC_MEMORY: Memory allocation failedExplanation The service failed to allocate memory.
Recommended Action Check if the system is low on memory, if so, reset the switch.
Error Message BOOTVAR-2-AUTOCOPY_FAILED: Autocopy of file [chars] to standby failed. [chars] (Error-id: [hex])Explanation The image to be copied to standby vi the auto-copy feature failed.
Recommended Action Check error id for specified reason.
Error Message BOOTVAR-2-AUTOSYNC_FAILED: Image autosync failed. Reason: [chars] ([hex])Explanation Image synchronization failed.
Recommended Action Check that there is enough space on the flash, and check the system high availability status.
Error Message BOOTVAR-2-CONFIG_ERROR: Failed to update boot configurationExplanation An error has occurred during the update of the boot configuration files.
Recommended Action Check that there is enough space on the flash, enter the show boot command to check the configured image names, enter the show loader internal command to compare the configurations, if the configurations do not match, enter the write erase command and retry saving the configuration.
Error Message BOOTVAR-2-IMAGE_NOT_COMPATIBLE: Warning: image [chars] is not compatible with the current platform in SUP [dec]Explanation The input image name is not compatible with the current platform.
Recommended Action Make sure that the system has the correct image before you reboot.
BOOTVAR-3
Error Message BOOTVAR-3-AUTOCOPY_FAILED_STANDBY_FULL: Autocopy of file [chars] to standby failed due to not enough disk space on standbyExplanation There is not enough disk space on the standby for the file to be copied.
Recommended Action Clear space on the standby disk.
Error Message BOOTVAR-3-INIT_FAILED: Initialization failed: Component [chars]Explanation The system detects that the service has failed to start. The failure occurs during initialization of the component [chars].
Recommended Action Enter the show processes command to check the status of the other processes, pay attention to the specified component.
Error Message BOOTVAR-3-LOAD_VERIFY_LIB_FAILED: Fetching library [chars] failed, reason=[chars]Explanation The system has failed to load bootvar that is specified in the verification library.
Recommended Action No action is required.
Error Message BOOTVAR-3-MODULE_LOCK_FAIL: Unable to get module lock, please don't reload <error-id:[hex]>Explanation The system is unable to acquire modlock to prevent the user to reload duringautosynchronization.
Recommended Action No action is required.
Error Message BOOTVAR-3-NEIGHBOR_REJECT_AUTOCOPY: auto-copy failed - not supported by neighbor supervisor.Explanation The autocopy has failed because it is not supported by the standby supervisor module.
Recommended Action No action is required.
Error Message BOOTVAR-3-VERIFY_FAILED: Image [chars] for bootvar [chars] verification failed, reason=[chars]Explanation The image set for this bootvar has failed the verification process.
Recommended Action Check reason to determine actions.
BOOTVAR-5
Error Message BOOTVAR-5-AUTOCOPY_SUCCEED: auto-copy of file [chars] to standby supervisor succeedExplanation The autocopy of the file has succeeded. The image integrity has been verified by the standby supervisor module.
Recommended Action No action is required.
Error Message BOOTVAR-5-AUTOCOPY_VERIFY_SEND_FAILED: Unable to ask standby to verify file [chars], error = [hex]Explanation When the image was copied to the standby supervisor module, the system failed to ask the standby supervisor module to verify the integrity of the image.
Recommended Action Turn auto-copy off and back on.
Error Message BOOTVAR-5-AUTOSYNC_DONE: Image autosync doneExplanation The image synchronization was successful.
Recommended Action No action is required.
Error Message BOOTVAR-5-AUTOSYNC_REBOOT: Rebooting standby after successful autosyncExplanation The image autosynchronization has been successful. The system is resetting the standby supervisor to load the new image.
Recommended Action Check that the standby supervisor module reloads correctly.
Error Message BOOTVAR-5-AUTOSYNC_START: Starting image autosync. Please wait until completion...Explanation The standby supervisor module has requested the synchronizationof the current image.
Recommended Action No action is required.
Error Message BOOTVAR-5-IMAGE_NOTEXISTS: Warning: image [chars] doesn't exist on sup[dec]Explanation The input image name does not exist on the specified supervisor.
Recommended Action Check whether the input image name you entered exists and make sure that you have the image on the flash before you reboot.
Error Message BOOTVAR-5-NEIGHBOR_UPDATE_AUTOCOPY: auto-copy supported by neighbor supervisor, starting...Explanation The information log reports that the standby supervisor module supports autocopy. Autocopy is being started.
Recommended Action No action is required.
BOOTVAR-6
Error Message BOOTVAR-6-ALREADY_IN_SYNC: Image already in syncExplanation This message indicates that you do not need to update the image on the standby supervisor module.
Recommended Action No action is required.
Error Message BOOTVAR-6-CONFIG_UPDATED: Boot configuration updatedExplanation The boot-loader configuration files have been successfully updated.
Recommended Action No action is required.
Error Message BOOTVAR-6-STARTING: Boot configuration initializedExplanation The service has successfully started.
Recommended Action No action is required.
CALLHOME Messages
This section contains the CALLHOME messages.
CALLHOME-2
Error Message CALLHOME-2-EVENT: [chars]Explanation A Call Home event [chars] occurred.
Recommended Action If you have configured your e-mail address to receive Call Home notifications, check your email for more details about this callhome event. If callhome was not enabled, execute commands relevant to the callhome event to get more information about the error.
Error Message CALLHOME-2-PROGRAM_EXIT: callhome process ending: [chars]Explanation A Call Home process is exiting with the reason [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
CALLHOME-3
Error Message CALLHOME-3-CALLHOME_CFS_MERGE_OPERATION_FAILED: [chars]Explanation [chars1].
Recommended Action Check the reason for the failure of the CFS operation and fix the problem.
Error Message CALLHOME-3-CALLHOME_CFS_OPERATION_FAILED: [chars] : [chars]Explanation [chars1] [chars2].
Recommended Action Check the reason for the failure of the CFS operation and fix the problem.
Error Message CALLHOME-3-CALLHOME_MAX_ALERT_MSG: [chars]Explanation [chars].
Recommended Action Check the reason for the generation of the Call Home messages and fix the problem.
Error Message CALLHOME-3-EVENT_PROCESS_ERROR: error in processing callhome event [chars] reason:[chars]Explanation An error has occurred when processing the Call Home event [chars] reason:[chars].
Recommended Action Check that Call Home is properly configured on your system. Check the SMTP server address, e-mail addresses for destination profiles and enable Call Home. Use show Call Home commands for displaying the configuration.
Error Message CALLHOME-3-MESSAGE_SIZE_EXCEED: message size for callhome alert:[chars] exceeds maximum limit for destination profile:[chars]Explanation The message size for Call Home alert:[chars] exceeds the maximum limit for destination profile:[chars].
Recommended Action Check the maximum message size for the destination profile . Increase it if possible to match the maximum limit allowed by your e-mail destinations.
CALLHOME-6
Error Message CALLHOME-6-NONCRIT_EVENT: [chars]Explanation A noncritical Call Home event [chars] occurred.
Recommended Action If you have configured your e-mail address to receive Call Home notifications, check your email for more details about this callhome event. If callhome was not enabled, execute commands relevant to the callhome event to get more information about the error.
CDP Messages
This section contains the CDP messages.
CDP-2
Error Message CDP-2-INITFAIL: CDP Daemon Initialization failed: [chars]Explanation CDP daemon initialization failed. [chars] explains the reason for the failure.
Recommended Action No action is required.
CDP-3
Error Message CDP-3-ALLOCFAIL: Heap Memory allocation failed: [chars]Explanation The CDP daemon is out of dynamic memory. [chars] specifies the context where the failure occurred.
Recommended Action No action is required.
Error Message CDP-3-GENERROR: [chars]Explanation The CDP daemon encountered a generalerror thatdoes not fall in any of the above categories. [chars] describes the error and its context.
Recommended Action No action is required.
Error Message CDP-3-MCASTBINDFAIL: Failed to bind for CDP multicast address on interface [hex] - [chars]Explanation An attempt to register for packets destined to the CDP multicast address failed. [dec] identifies the interface and [char] identifies the reason.
Recommended Action No action is required.
Error Message CDP-3-MTSERROR: [chars]Explanation The CDP daemon encountered an MTS error. [chars] specifies the context where the error occurred.
Recommended Action No action is required.
Error Message CDP-3-PKTRECVFAIL: Failed to receive packet - [chars]Explanation The system has failed to receive the packet. [char] identifies the reason.
Recommended Action No action is required.
Error Message CDP-3-PKTSENDFAIL: Failed to send packet, interface [hex] - [chars]Explanation The system has failed to send the packet. [dec] identifies the interface and [char] identifies the reason.
Recommended Action No action is required.
Error Message CDP-3-PSSERROR: [chars]Explanation The CDP daemon encountered a PSS error. [chars] specifies the context where the failure occurred.
Recommended Action No action is required.
Error Message CDP-3-SOCKBINDFAIL: Failed to bind to raw socket, interface [hex] - [chars]Explanation The system has failed to bind to a raw socket. [dec] identifies the interface and [char] identifies the reason.
Recommended Action No action is required.
Error Message CDP-3-SOCKOPENFAIL: Failed to open socket for receiving raw 802_2 packets - [chars]Explanation An attempt to open a socket for receiving raw 802_2 packets failed. [char] identifies the reason.
Recommended Action No action is required.
CDP-4
Error Message CDP-4-DUPLEX_MISMATCH: Duplex mismatch discovered on [chars], with [chars]Explanation A duplex mismatch has been discovered from the received CDP packet.
Recommended Action No action is required.
Error Message CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on [chars]([dec]), with [chars]([dec])Explanation A native VLAN mismatch has been discovered.
Recommended Action No action is required.
CDP-5
Error Message CDP-5-DISABLED: CDP is disabledExplanation CDP is disabled on the device.
Recommended Action No action is required.
Error Message CDP-5-ENABLED: CDP is enabledExplanation CDP is enabled on the device.
Recommended Action No action is required.
CDP-6
Error Message CDP-6-CDPDUP: CDP Daemon Up.Explanation The CDP daemon was created successfully and is up and running.
Recommended Action No action is required.
Error Message CDP-6-CDPEXIT: CDP Daemon shutting down gracefully.Explanation The CDP daemon is shutting down gracefully.
Recommended Action No action is required.
Error Message CDP-6-NEIGHBOR_ADDED: Device [chars] discovered of type [chars] with port [chars] on incoming port [chars] with ip addr [chars] and mgmt ip [chars]Explanation The system discovered a neighbor device.
Recommended Action No action is required.
Error Message CDP-6-NEIGHBOR_REMOVED: CDP Neighbor [chars] on port [chars] has been removedExplanation The system deleted a neighbor device.
Recommended Action No action is required.
Error Message CDP-6-PORTDISABLE: CDP disabled on port [chars]Explanation CDP was disabled on a given port. [chars] is the interface-ID string that identifies the port.
Recommended Action No action is required.
Error Message CDP-6-PORTDOWN: A CDP enabled port [chars] went down.Explanation A CDP enabled port became unoperational. [chars] is the interface-ID string that identifies the port.
Recommended Action No action is required.
Error Message CDP-6-PORTENABLE: CDP enabled on port [chars]Explanation CDP was enabled on a given port. [chars] is the interface-ID string that identifies the port.
Recommended Action No action is required.
Error Message CDP-6-PORTUP: A CDP enabled port [chars] came up.Explanation A CDP enabled port became operational. [chars] is the interface-ID string that identifies the port.
Recommended Action No action is required.
CERT_ENROLL Messages
This section contains the CERT_ENROLL messages.
CERT_ENROLL-2
Error Message CERT_ENROLL-2-CERT_EN_PROGRAM_EXIT: cert_enroll daemon exiting: [chars]Explanation The CERT_ENROLL daemon is exiting.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
CERT_ENROLL-3
Error Message CERT_ENROLL-3-CERT_EN_ERROR_MESSAGE: [chars]Explanation This message indicates that a CERT_ENROLL error has occurred.
Recommended Action No action is required.
Error Message CERT_ENROLL-3-CERT_EN_FIPS_MODE_INIT_ERROR: Could not initialize FIPS mode : [chars]Explanation This message indicates that a FIPS mode error has occurred.
Recommended Action No action is required.
CERT_ENROLL-6
Error Message CERT_ENROLL-6-CERT_EN_MESSAGE: [chars]Explanation This message indicates that a CERT_ENROLL error has occurred.
Recommended Action No action is required.
CFS Messages
This section contains the CFS messages.
CFS-2
Error Message CFS-2-CFS_REJECT: CFS reject: [chars]: Switch WWN [chars], ip [chars], reason [chars]Explanation This message indicates that the CFS process was rejected: [chars] Switch WWN [chars], ip [chars], reason [chars].
Recommended Action No action is required.
Error Message CFS-2-EXITING: Exit reason: [chars]Explanation The CFS service process has exited due to [char]. The process has probably been restarted automatically.
Recommended Action No action is required.
Error Message CFS-2-GENERAL_ERROR: [chars]Explanation The CFS service has encountered a critical error. The description of the error is [str.].
Recommended Action No action is required.
Error Message CFS-2-INITFAIL: CFS Service Init failed: [chars]Explanation CFS Service initialization failed. [chars] explains the reason for the failure.
Recommended Action No action is required.
Error Message CFS-2-LOCK_FAILED: lock failed for sap [dec] due to internal error.Explanation Lock failed due to Unrestricted uncoordinated count is out of synchronizationfor sap [dec].
Recommended Action To recover from this state run command 'cfs internal decrement-unrestricted <app-sap>'.
Error Message CFS-2-MALLOC_ERROR: Size [dec] bytesExplanation The CFS service could not allocate enough memory.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message CFS-2-MTS_REJECT: Verification failed reject MTS message SAP [dec]:RR-token [hex]Explanation This MTS message could have been posted by the previous active running pre 3.x; MTS structure has changed since then therefore ignore the MTS message, Source SAP [dec]; RR-token [hex].
Recommended Action No action is required.
Error Message CFS-2-PSS_ERROR: [chars]: PSS ret. val=[dec]Explanation The CFS service encountered an error while operating on a persistent storage database.
Recommended Action No action is required.
Error Message CFS-2-VDC_MGR_FAIL: Failed to get a valid switch mac from VDC Manager: [chars]Explanation VDC manager did not respond with a proper MAC address. It could have been because of a timeout in MTS received.
Recommended Action No action is required.
CFS-3
Error Message CFS-3-ALLOCFAIL: Heap Memory allocation failed: [chars]Explanation CFS Service is out of dynamic memory. [chars] specifies the context where the failure occurred.
Recommended Action No action is required.
Error Message CFS-3-APP_MERGE_FAILED: Merge failed for app [chars], local switch wwn [chars], remote switch wwn [chars].Please check 'show cfs merge status name [chars]' for more informationExplanation The CFS service has detected a merge failure.
Recommended Action No action is required.
Error Message CFS-3-CFS_PSS_CORRUPTED: [chars] PSS found corruptedExplanation The CFS service has detected a corrupted file in its persistent information databases The database would be recreated.
Recommended Action No action is required.
Error Message CFS-3-DBERROR: [chars]Explanation CFS Service encountered a database error. [chars] specifies the context where the failure occurred.
Recommended Action No action is required.
Error Message CFS-3-FAILURE_RESPONSE: [chars] [hex]Explanation CFS Service failed to get response [chars][hex] specify the context where the failure occurred.
Recommended Action No action is required.
Error Message CFS-3-FIPS_TEST_FAILED: FIPS compliance test failedExplanation FIPS compliance test failed.
Recommended Action No action is required.
Error Message CFS-3-GENERROR: [chars]Explanation CFS Service encountered a generalerror thatdoes not fall in any of the above categories. [chars] describes the error and its context.
Recommended Action No action is required.
Error Message CFS-3-LICERR: [chars]Explanation CFS Service failed to get license.
Recommended Action No action is required.
Error Message CFS-3-MERGE_FAILED: Merge failed for app [chars], local switch wwn [chars],ip [chars], remote switch wwn [chars], ip [chars]Explanation The CFS service has detected a merge failure.
Recommended Action No action is required.
Error Message CFS-3-MTSERROR: [chars]Explanation CFS Service encountered an MTS error. [chars] specifies the context where the error occurred.
Recommended Action No action is required.
Error Message CFS-3-PSSERROR: [chars]Explanation CFS Service encountered a PSS error. [chars] specifies the context where the failure occurred.
Recommended Action No action is required.
Error Message CFS-3-TIMEOUT_ERROR: [chars] [hex]Explanation CFS Service encountered a timeout [chars][hex] specify the context where the failure occurred.
Recommended Action No action is required.
Error Message CFS-3-UNKNOWN_MSG: Recvd. from Node=[dec] SAP=[dec]Explanation The CFS service has received an unknown message from [dec]].[dec]. This information is for debugging only.
Recommended Action No action is required.
CFS-4
Error Message CFS-4-LICEXP: [chars]Explanation CFS Service license is going to expire. [chars] gives the expected time of expiry.
Recommended Action No action is required.
Error Message CFS-4-PSS_VERSION_MISMATCH: PSS [dec] Code [dec]Explanation There was a version mismatch between the CFS service and one of its persistent storage databases. The persistent information has been translated to the new format.
Recommended Action No action is required.
CFS-6
Error Message CFS-6-BECAME_ACTIVE: Became ACTIVE from standby modeExplanation The CFS service on the standby supervisor became active and it is ready to serve client requests.
Recommended Action No action is required.
Error Message CFS-6-BECAME_STDBY: Became STANDBY from active modeExplanation The CFS service became standby from active mode.
Recommended Action No action is required.
Error Message CFS-6-EXCESSIVE_DELAY: [chars]Explanation Excessive time taken for a processing event. The description of the event is [str.].
Recommended Action No action is required.
Error Message CFS-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system manager: Reason=[chars]Explanation The CFS service was unable to send heartbeats to the system manager.
Recommended Action No action is required.
Error Message CFS-6-GENERAL_EVENT: [chars]Explanation The CFS service has generated an important event. The description of the event is [str.].
Recommended Action No action is required.
Error Message CFS-6-INVALID_CHECKSUM: Received packet from peer on if-index([hex]) with corrupted checksumExplanation This could be because of the errors in the link.
Recommended Action No action is required.
Error Message CFS-6-INVALID_IF_INDEX: Received packet on if-index([hex]) which is not recognized by CFSExplanation The if-index does not match with the if-index used in discovery orthe systemmight have already received an adjacency cleanup message for this if-index. Check if the if-index is that of the port channel or a physical if-index.
Recommended Action No action is required.
Error Message CFS-6-LOGICAL_DISTRIBUTION_INFO: vsan [dec], source wwn [chars], ip [chars] app-id [dec], session-id [dec], user [chars], [chars]Explanation VSAN [dec], source wwn [chars], ip [chars], app-id [dec], user [chars], event [chars].
Recommended Action No action is required.
Error Message CFS-6-PHY_DISTRIBUTION_INFO: source wwn [chars], ip [chars], app-id [dec], session-id [dec], user [chars], [chars]Explanation Source wwn [chars], ip [chars], app-id [dec], session-id [dec], user [chars], event [chars].
Recommended Action No action is required.
Error Message CFS-6-PSS_CREATED: [chars] PSS CreatedExplanation One of the persistent information database of CFS service has been recreated.
Recommended Action No action is required.
Error Message CFS-6-PSS_DESTROYED: [chars] PSS DestroyedExplanation One of the persistent information databases of CFS Service has been intentionally destroyed and would be recreated.
Recommended Action No action is required.
Error Message CFS-6-REGION_CTX_REMOVED: Region info is deleted for [chars]Explanation [chars] is in logical scope. Regions support only physical scope applications.
Recommended Action No action is required.
Error Message CFS-6-SERVICE_UP: Initialized [chars]Explanation The CFS service is up and ready to accept client requests The service was initialized in [char] mode.
Recommended Action No action is required.
Error Message CFS-6-SRVCREATED: CFS Service createdExplanation CFS Service was created successfully and is up and running.
Recommended Action No action is required.
Error Message CFS-6-SRVEXIT: CFS Service shutting down gracefullyExplanation CFS Service is shutting down gracefully.
Recommended Action No action is required.
Error Message CFS-6-SWITCHOVER: Switching Over to other Sup.Explanation The CFS service has successfully switched over to the standby supervisor module.
Recommended Action No action is required.
CIMSRVPROV Messages
This section contains the CIMSRVPROV messages.
CIMSRVPROV-2
Error Message CIMSRVPROV-2-CIM_SYSLOG_EXIT: Message:[chars] errcode:[dec]Explanation Exit due to critical error.
Recommended Action No action is required.
Error Message CIMSRVPROV-2-CIM_SYSLOG_PSS_SNAPSHOT_ERR: Source URI:[chars] Destination URI:[chars] errcode:[dec]Explanation PSS snapshot error.
Recommended Action No action is required.
Error Message CIMSRVPROV-2-CIM_SYSLOG_SDWRAP_ERR: Description:[chars] errcode:[dec]Explanation Debug infrastructure error.
Recommended Action No action is required.
CIMSRVPROV-3
Error Message CIMSRVPROV-3-CIM_SYSLOG_COPY_CONFIG_ERR: Message:[chars] URI:[chars] errcode:[dec]Explanation Copy running startup error.
Recommended Action No action is required.
Error Message CIMSRVPROV-3-CIM_SYSLOG_FILE_ERR: Purpose:[chars] Filename:[chars] errcode:[dec]Explanation File handling error.
Recommended Action No action is required.
Error Message CIMSRVPROV-3-CIM_SYSLOG_MTS_ERR: message [chars]Explanation MTS message handling error.
Recommended Action No action is required.
Error Message CIMSRVPROV-3-CIM_SYSLOG_PSS_ERR: Purpose:[chars] URI:[chars] errcode:[dec]Explanation PSS handling error.
Recommended Action No action is required.
CIMSRVPROV-6
Error Message CIMSRVPROV-6-LOG_CIM_CERTIFICATE_CLEARED: Cleared certificate [chars]Explanation Cleared a certificate named [chars].
Recommended Action No action is required.
Error Message CIMSRVPROV-6-LOG_CIM_CERTIFICATE_INSTALLED: Installed certificate [chars]Explanation Installed a certificate named [chars].
Recommended Action No action is required.
CLIS Messages
This section contains the CLIS messages.
CLIS-5
Error Message CLIS-5-CLIS_SYSLOG_CMD_REMOVED: Command deleted from the NVDB: [chars]Explanation Command removal due to configuration change.
Recommended Action No action is required.
CLOUD Messages
This section contains the CLOUD messages.
CLOUD-2
Error Message CLOUD-2-PROGRAM_EXIT: cloud-discovery process ending: [chars]Explanation Cloud-discovery process is exiting with the reason [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
CLOUD-3
Error Message CLOUD-3-CLOUD_CFS_MERGE_OPERATION_FAILED: [chars]Explanation [chars1].
Recommended Action Check the reason for the failure of the CFS operation and fix the problem.
Error Message CLOUD-3-CLOUD_CFS_OPERATION_FAILED: [chars] : [chars]Explanation [chars1] [chars2].
Recommended Action Check the reason for the failure of the CFS operation and fix the problem.
Error Message CLOUD-3-CLOUD_FEATURE_MANAGER_ERROR: [chars] : [chars]Explanation [chars1] [chars2].
Recommended Action Check the reason for error using feature manager and fix the problem.
Error Message CLOUD-3-CLOUD_PSS_OPERATION_FAILED: [chars] : [chars]Explanation [chars1] [chars2].
Recommended Action Check the reason for the failure of the pss operation and fix the problem.
CLOUD-6
Error Message CLOUD-6-CLOUD_DISCOVERY_DONE: discovery overExplanation Cloud-discovery started.
Recommended Action Check cloud membership.
Error Message CLOUD-6-CLOUD_DISCOVERY_STARTED: [chars] discovery startedExplanation Cloud-discovery started.
Recommended Action Check cloud-discovery status after sometime.
CLUSTER Messages
This section contains the CLUSTER messages.
CLUSTER-2
Error Message CLUSTER-2-CLUSTER_CAP_ADD_FAIL: Failed to add cluster capability [dec]Explanation Cluster capability addition failed.
Recommended Action No action is required.
Error Message CLUSTER-2-CLUSTER_CAP_DEL_FAIL: Failed to delete cluster capability [dec]Explanation Cluster capability deletion failed.
Recommended Action No action is required.
CMPPROXY Messages
This section contains the CMPPROXY messages.
CMPPROXY-2
Error Message CMPPROXY-2-LOG_CMP_IS_NOT_UP: Connectivity Management processor (on module [dec]) did not come upExplanation Connectivity Management processor is not sending heartbeats on this module.
Recommended Action No action is required.
Error Message CMPPROXY-2-LOG_CMP_UP: Connectivity Management processor(on module [dec]) is now UPExplanation Connectivity Management processor has come up and is exchanging heartbeats with CP on this supervisor slot.
Recommended Action No action is required.
Error Message CMPPROXY-2-LOG_CMP_WENT_DOWN: Connectivity Management processor (on module [dec]) went DOWNExplanation Connectivity Management processor has either gone down or is not sending heartbeats for a long time.
Recommended Action No action is required.
CMPPROXY-5
Error Message CMPPROXY-5-LOG_CMP_AAA_FAILURE: Authentication failed for a login from CMP (on module [dec])Explanation A login attempt has been denied access from Connectivity management processor (CMP) as authentication did not succeed.
Recommended Action No action is required.
Error Message CMPPROXY-5-MALLOC_FAILURE: Memory allocation failureExplanation Memory allocation in a call to malloc/calloc has failed.
Recommended Action No action is required.
CMPPROXY-6
Error Message CMPPROXY-6-LOG_CMP_AAA_SUCCESS: Authentication succeeded for a login from CMP (on module [dec])Explanation A login attempt has succeeded from Connectivity management processor (CMP) in getting access as AAA succeeded.
Recommended Action No action is required.
COPP Messages
This section contains the COPP messages.
COPP-2
Error Message COPP-2-COPP_INIT_FAIL: CoPP Initialization failed: [chars]Explanation CoPP Initialization failed. [chars] explains the reason for the failure.
Recommended Action No action is required.
Error Message COPP-2-COPP_MTS_FAIL: Failed to do MTS operation: [chars]Explanation The system has failed to do an MTS operation. [chars] explains the reason for the failure.
Recommended Action No action is required.
COPP-3
Error Message COPP-3-COPP_ALLOC_FAIL: Memory allocation failure: [chars]Explanation Failed to allocate required memory. [chars] explains the reason for the failure.
Recommended Action No action is required.
Error Message COPP-3-COPP_PPF_FAIL: Error during PPF operation: [chars]Explanation The system has failed to do a PPF operation. [chars] explains the reason for the failure.
Recommended Action No action is required.
Error Message COPP-3-COPP_PSS_FAIL: Error during PSS operation: [chars]Explanation The system has failed to do a PSS operation. [chars] explains the reason for the failure.
Recommended Action No action is required.
COPP-5
Error Message COPP-5-COPP_DISABLED: COPP DisabledExplanation COPP Service Disabled.
Recommended Action No action is required.
Error Message COPP-5-COPP_ENABLED: COPP EnabledExplanation COPP Service nabled.
Recommended Action No action is required.
Error Message COPP-5-COPP_INIT: COPP initializedExplanation COPP Service Initialized.
Recommended Action No action is required.
COPP-6
Error Message COPP-6-COPP_POLICY_ATTACHED: CoPP policy has been attached to control plane interface.Explanation CoPP policy has been attached to control plane interface.
Recommended Action No action is required.
Error Message COPP-6-COPP_POLICY_DETACHED: CoPP policy has been detached from control plane interface.Explanation CoPP policy has been detached from control plane interface.
Recommended Action No action is required.
CORE-DMON Messages
This section contains the CORE-DMON messages.
CORE-DMON-2
Error Message CORE-DMON-2-MODULE_COREDUMP_DONE: kernel coredump completed on module:[dec]Explanation Kernel coredump finishing on a module.
Recommended Action No action is required.
Error Message CORE-DMON-2-MODULE_COREDUMP_STARTED: kernel coredump started on module:[dec]Explanation Kernel coredump starting on a module.
Recommended Action No action is required.
CREDITMON-SLOT# Messages
This section contains the CREDITMON-SLOT# messages.
CREDITMON-SLOT#-2
Error Message CREDITMON-SLOT#-2-SYSERR_CREDITMON_APP_EXITED: [chars]Explanation Credit Monitor application exited.
Recommended Action No action is required.
Error Message CREDITMON-SLOT#-2-SYSERR_CREDITMON_MTS_INIT_ERR: [chars]Explanation Credit Monitor error binding to MTS.
Recommended Action No action is required.
CTS Messages
This section contains the CTS messages.
CTS-2
Error Message CTS-2-CTS_AUTHENT_FAILURE: CTS Authentication failure on Port [chars] (CTS Failure Reason: [chars] [chars])Explanation Fibre-Channel Authentication failure on Port [chars].(Reason Code [chars] Detail [chars]). Check password configurations and ensure appropriate security modes on this port as well as peer port.
Recommended Action No action is required.
Error Message CTS-2-DBG_INIT_FAILED: Debug Infrastructure Initialization failed ( [chars] )Explanation The system has detected an error.
Recommended Action No action is required.
Error Message CTS-2-FC2_E_INIT_FAILED: Fibre-Channel Initialization of an E_Port failed ( [chars] )Explanation CTS Manager has been unable to initialize with the FC-2 E-Port infrastructure.
Recommended Action No action is required.
Error Message CTS-2-FC2_F_INIT_FAILED: Fibre-Channel Initialization of an F_Port failed ( [chars] )Explanation CTS Manager has been unable to initialize with the FC-2 F-Port infrastructure.
Recommended Action No action is required.
Error Message CTS-2-FC2_UNKNOWN_FRM_RECD_CRIT: Received an unexpected/unknown FC-2 frame on [chars]Explanation The system has detected an error.
Recommended Action No action is required.
Error Message CTS-2-FSMU_INIT_FAILED: State Machine Infrastructure Initialization failed ( [chars] )Explanation The system has detected an error.
Recommended Action No action is required.
Error Message CTS-2-IPC_INIT_FAILED: IPC (Inter Process Communication) Initialization failed ( [chars] )Explanation CTS Manager has been unable to initialize with the IPC infrastructure.
Recommended Action No action is required.
Error Message CTS-2-LICENSE_UNAVAILABLE: License:[chars] unavailable, service exitingExplanation License of [chars] is unavailable. Service will exit now.
Recommended Action Install the license file to continue using the feature.
Error Message CTS-2-MEM_FAILED: Memory operations failed File: [chars] Line [dec] for size [hex] bytesExplanation The system has detected an error.
Recommended Action No action is required.
Error Message CTS-2-POST_INIT_FAILED: Post-Initialization failed ( [chars] )Explanation The system has detected an error.
Recommended Action No action is required.
Error Message CTS-2-PSS_INIT_FAILED: PSS Infrastructure Initialization failed ( [chars] )Explanation The system has detected an error.
Recommended Action No action is required.
Error Message CTS-2-RBACL_UNABLE_PARSE_ACE: Unable to parse RBACL ACE substring: [chars]Explanation The system has detected an error.
Recommended Action No action is required.
CTS-3
Error Message CTS-3-DOT1X_AUTHC_FAILED: DOT1X authentication failed on port: [chars]Explanation DOT1X authentication failed on the port.
Recommended Action No action is required.
DEBUGPROXY Messages
This section contains the DEBUGPROXY messages.
DEBUGPROXY-6
Error Message DEBUGPROXY-6-SSM_DEBUG_PROXY_COMMON: SSM debug proxy [chars] [dec]Explanation General SSM debug proxy information.
Recommended Action No action is required.
DEV_LOG Messages
This section contains the DEV_LOG messages.
DEV_LOG-3
Error Message DEV_LOG-3-ERROR: [chars]Explanation Dev_log_lc encountered an error.
Recommended Action No action is required.
DEVICE-ALIAS Messages
This section contains the DEVICE-ALIAS messages.
DEVICE-ALIAS-2
Error Message DEVICE-ALIAS-2-ALLOC_FAILED: Memory allocation failed for size:[dec] type:[dec]Explanation Memory allocation failed for size [dec] type [dec].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-2-INIT_FAILED: [chars]Explanation An error occurred during initialization. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
DEVICE-ALIAS-3
Error Message DEVICE-ALIAS-3-CFS_OPER_FAILED: [chars]Explanation An error occurred while performing a CFS operation. [chars] indicates the CFS operation and the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-CLEAR_FAILED: [chars]Explanation An error occurred while clearing the session. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-COMMIT_FAILED: [chars]Explanation An error occurred while committing the database. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-COMMIT_REJECTED: [chars]Explanation Commit request received from remote switch is rejected. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-LOCK_FAILED: [chars]Explanation An error occurred while acquiring the lock. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-LOCK_REJECTED: [chars]Explanation Lock request received from remote switch is rejected. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-MERGE_ACTIVATION_FAILED: [chars]Explanation An error occurred while activating the merged database. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-MERGE_ACTIVATION_REJECTED: [chars]Explanation Merge activation request received from remote switch is rejected. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-MERGE_FAILED: [chars]Explanation An error occurred during merge operation. [chars] indicates the reason for failure.
Recommended Action Compare device-alias configuration with the other switches in the fabric, resolve the conflicts if any and commit the changes.
Error Message DEVICE-ALIAS-3-MERGE_MREQ_REJECTED: [chars]Explanation MREQ received from remote switch is rejected. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-MERGE_MRESP_REJECTED: [chars]Explanation MRESP received from remote switch is rejected. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-MERGE_VALIDATION_FAILED: [chars]Explanation An error occurred while validating the merged database. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-MERGE_VALIDATION_REJECTED: [chars]Explanation Merge validation request received from remote switch is rejected. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-MTS_OPER_FAILED: [chars]Explanation An error occurred during MTS operation. [chars] indicates the MTS operation and the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-PSS_OPER_FAILED: [chars]Explanation An error occurred during PSS operation. [chars] indicates the PSS operation and the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-UNLOCK_FAILED: [chars]Explanation An error occurred while releasing the lock. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-UNLOCK_REJECTED: [chars]Explanation Unlock request received from remote switch is rejected. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-VALIDATION_FAILED: [chars]Explanation An error occurred while validating the database. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-VALIDATION_REJECTED: [chars]Explanation Validation request received from remote switch is rejected. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
DEVICE-ALIAS-6
Error Message DEVICE-ALIAS-6-CLEAR_FAILED_INFO: [chars]Explanation An error occurred while clearing the session. [chars] indicates the additional information regarding failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-6-COMMIT_FAILED_INFO: [chars]Explanation An error occurred while committing the database. [chars] indicates the additional information regarding failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-6-IMPORT_DEFINITION_CONFLICT: Fcalias [chars] could not be imported due to definition conflictExplanation Fcalias [chars] could not be imported due to definition conflict. Either there is already a device-alias configuration present with the same definition OR another VSAN specified in the import VSAN range has an fcalias with the same definition.
Recommended Action Resolve the conflict and issue the import command again.
Error Message DEVICE-ALIAS-6-IMPORT_MEMBER_TYPE_CONFLICT: Fcalias [chars] could not be imported due to having unsupported member typeExplanation Fcalias [chars] could not be imported due to having unsupported member types. Fcalias can be imported only if it has Port WWN based members.
Recommended Action Make sure that the fcalias has Port WWN based members and issue the import command again.
Error Message DEVICE-ALIAS-6-IMPORT_NAME_CONFLICT: Fcalias [chars] could not be imported due to name conflictExplanation Fcalias [chars] could not be imported due to name conflict. Either there is already a device-alias configuration present with the same name OR another VSAN specified in the import VSAN range has an fcalias with the same name.
Recommended Action Resolve the conflict and issue the import command again.
Error Message DEVICE-ALIAS-6-IMPORT_NUM_MEMBERS_CONFLICT: Fcalias [chars] could not be imported due to having unsupported number of membersExplanation Fcalias [chars] could not be imported due to having unsupported number of members. Fcalias can be imported only if it has exactly one member.
Recommended Action Make sure that the fcalias has exactly one member and issue the import command again.
Error Message DEVICE-ALIAS-6-LOCK_FAILED_INFO: [chars]Explanation An error occurred while acquiring the lock. [chars] indicates the additional information regarding failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-6-MERGE_ACTIVATION_FAILED_INFO: [chars]Explanation An error occurred while activating the merged database. [chars] indicates the additional information regarding failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-6-MERGE_VALIDATION_FAILED_BUSY: [chars]Explanation Merged database could not be validated as some of the applications are busy. [chars] indicates information about the application returned busy. There is no user intervention necessary. The validation would be automatically retried after some time.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-6-MERGE_VALIDATION_REJECTED_BUSY: [chars]Explanation Merged database received from the remote switch could not be validated as some of the applications are busy. [chars] indicates information about the application returned busy. There is no user intervention necessary. The validation would be automatically retried after some time.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-6-UNLOCK_FAILED_INFO: [chars]Explanation An error occurred while releasing the lock. [chars] indicates the additional information regarding failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-6-VALIDATION_ABORTED: [chars]Explanation Local validation is aborted. [chars] indicates the reason why validation is aborted.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
DEVICE_TEST Messages
This section contains the DEVICE_TEST messages.
DEVICE_TEST-2
Error Message DEVICE_TEST-2-ASIC_REG_CHECK_FAIL: Module [dec] has failed test [chars] [dec] times on device [chars] instance [dec] frontpanel ports affected [chars] due to error [chars]Explanation The online diagnostic ASICRegisterCheck test has failed.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-COMPACT_FLASH_FAIL: Module [dec] has failed test [chars] [dec] times on device Compact Flash due to error [chars]Explanation The online diagnostic CompactFlash test has failed.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-CRYPTO_DEVICE_FAIL: Module [dec] has failed test [chars] [dec] times on Crypto device due to error [chars]Explanation The online diagnostic CryptoDevice test has failed.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-MALLOC_FAILURE: Memory allocation failedExplanation Device Test process could not allocate enough memory.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-NVRAM_FAIL: Module [dec] has failed test [chars] [dec] times on device NVRAM due to error [chars]Explanation The online diagnostic NVRAM test has failed.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-PRIMARY_BOOTROM_FAIL: Module [dec] has failed test [chars] [dec] times on device Primary BootROM due to error [chars]Explanation The online diagnostic PrimaryBootROM test has failed.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-PWR_MGMT_BUS_FAIL: Module [dec] has failed test [chars] [dec] times on device Power Mgmt Bus on slot [dec] due to error [chars] error number [hex]Explanation The online diagnostic PwrMgmtBus test has failed.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-RTC_FAIL: Module [dec] has failed test [chars] [dec] times on device RealTimeClock due to error [chars]Explanation The online diagnostic RealTimeClock test has failed.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-SECONDARY_BOOTROM_FAIL: Module [dec] has failed test [chars] [dec] times on device Secondary BootROM due to error [chars]Explanation The online diagnostic SecondaryBootROM test has failed.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-SPINE_CONTROL_BUS_FAIL: Module [dec] has failed test [chars] [dec] times on device Spine Control Bus on slot [dec] due to error [chars] error number [hex]Explanation The online diagnostic SpineControlBus test has failed.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-SYSTEM_MGMT_BUS_FAIL: Module [dec] has failed test [chars] [dec] times on System Mgmt Bus for chassis [chars] instance [dec] due to error [chars] error number [hex]Explanation The online diagnostic The systemMgmtBus test has failed.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-TWOWIRE_STW_FAIL: Module [dec] has failed test [chars] [dec] times on Status Bus on slot [dec] due to error [chars]Explanation The online diagnostic Status bus test has failed.
Recommended Action No action is required.
Error Message DEVICE_TEST-2-USB_FAIL: Module [dec] has failed test [chars] [dec] times on device USB due to error [chars]Explanation The online diagnostic USB test has failed.
Recommended Action No action is required.
DEVICE_TEST-4
Error Message DEVICE_TEST-4-THREAD_CREATE_FAIL: Thread creation failedExplanation Device Test process could not create threads.
Recommended Action No action is required.
Error Message DEVICE_TEST-4-TIMER_CREATE_FAIL: Timer creation failedExplanation Device Test process could not create timer.
Recommended Action No action is required.
Error Message DEVICE_TEST-4-TIMER_START_FAIL: Timer start failedExplanation Device Test process could not start timer.
Recommended Action No action is required.
DEVICE_TEST-5
Error Message DEVICE_TEST-5-NOTICE_TEST: Memory allocation failed noticeExplanation Device Test process could not allocate enough memory.
Recommended Action No action is required.
DEVICE_TEST-6
Error Message DEVICE_TEST-6-INFO_TEST: Memory allocation failed infoExplanation Device Test process could not allocate enough memory.
Recommended Action No action is required.
DFTM Messages
This section contains the DFTM messages.
DFTM-3
Error Message DFTM-3-DFTM_BDDB_PROG_FAILED: DFTM failed to program BDDB Entry: [chars]Explanation DFTM failed to program BDDB Entry.
Recommended Action No action is required.
Error Message DFTM-3-DFTM_BDT_PROG_FAILED: DFTM failed to program BD Table Entry: [chars]Explanation DFTM failed to program BD Table Entry.
Recommended Action No action is required.
Error Message DFTM-3-DFTM_L2L3CT_PROG_FAILED: DFTM failed to program L2L3 Consistency Table Entry: [chars]Explanation DFTM failed to program L2L3 Consistency Table Entry.
Recommended Action No action is required.
Error Message DFTM-3-DFTM_MFT_PROG_FAILED: DFTM failed to program Multicast FTag Table Entry: [chars]Explanation DFTM failed to program Multicast Ftag Table Entry.
Recommended Action No action is required.
Error Message DFTM-3-DFTM_SDT_PROG_FAILED: DFTM failed to program SGT DGT Table Entry: [chars]Explanation DFTM failed to program SGT DGT Table Entry.
Recommended Action No action is required.
Error Message DFTM-3-DFTM_VTT_PROG_FAILED: DFTM failed to program VLAN Translation Table Entry: [chars]Explanation DFTM failed to program VLAN Translation Table.
Recommended Action No action is required.
DHCP_SNOOP Messages
This section contains the DHCP_SNOOP messages.
DHCP_SNOOP-2
Error Message DHCP_SNOOP-2-HWPGMFAILURE: Hardware programming has failed: [chars]Explanation Hardware programming has failed. [chars] explains the reason for the failure.
Recommended Action No action is required.
Error Message DHCP_SNOOP-2-INITFAIL: DHCP Daemon Initialization failed: [chars]Explanation DHCP daemon initialization failed. [chars] explains the reason for the failure.
Recommended Action No action is required.
Error Message DHCP_SNOOP-2-PSSERROR: [chars]Explanation DHCP Daemon encountered a PSS error. [chars] specifies the context where the failure occurred.
Recommended Action No action is required.
Error Message DHCP_SNOOP-2-REGPARTREE: Unable to register par tree: [chars]Explanation Could not register par tree. [chars] explains the reason for the failure.
Recommended Action No action is required.
DHCP_SNOOP-3
Error Message DHCP_SNOOP-3-ALLOCFAIL: Heap Memory allocation failed: [chars]Explanation DHCP Daemon is out of dynamic memory. [chars] specifies the context where the failure occurred.
Recommended Action No action is required.
Error Message DHCP_SNOOP-3-DHCPDENIEDARP: ARP frame denied due to DHCP snooping binding on interface [chars] vlan [dec] sender mac [chars] sender ip [chars] target mac [chars] target ip [chars].Explanation [chars] identifies interface and [dec] identifies the vlan on which ARP packets have been denied. [chars] identifies sender mac and [chars] identifies the sender ip. [chars] identifies the target mac and [chars] identifies the target ip.
Recommended Action No action is required.
Error Message DHCP_SNOOP-3-DHCPRATELIMIT: Interface [chars] has been error disabled due to excessive ingress rate [dec] of DHCP packets.Explanation [chars] identifies the interface which has been error disabled due to excessive ingress rate [dec].
Recommended Action No action is required.
Error Message DHCP_SNOOP-3-INVDHCPPKTS: [dec] invalid DHCP packets received on interface [chars] vlan [dec]Explanation [dec] identifies the number of invalid packets. [chars] identifies the interface and [dec] identifies the vlan.
Recommended Action No action is required.
Error Message DHCP_SNOOP-3-MTSERROR: [chars]Explanation The CDP daemon encountered an MTS error. [chars] specifies the context where the error occurred.
Recommended Action No action is required.
Error Message DHCP_SNOOP-3-PKTRECVFAIL: Failed to receive packet - [chars]Explanation The system has failed to receive the packet. [char] identifies the reason.
Recommended Action No action is required.
Error Message DHCP_SNOOP-3-PKTSENDFAIL: Failed to send packet, - [chars]Explanation The system has failed to send the packet. [char] identifies the reason.
Recommended Action No action is required.
Error Message DHCP_SNOOP-3-SOCKBINDFAIL: Failed to bind to raw socket - [chars]Explanation Failed to bind to socket. [char] identifies the reason.
Recommended Action No action is required.
Error Message DHCP_SNOOP-3-SOCKOPENFAIL: Failed to open socket for receiving DHCP packets - [chars]Explanation An attempt to open a socket for receiving DHCP packets failed. [char] identifies the reason.
Recommended Action No action is required.
DHCP_SNOOP-4
Error Message DHCP_SNOOP-4-ACL_DENY: [dec] Invalid ARP messages ([chars]) on [chars], vlan [dec]. ([[chars]/[chars]/[chars]/[chars]/[chars]])Explanation Packet-count [dec] Invalid ARPs (arp-type [chars]) on interface [chars], vlan [dec]. ([sender-mac [chars]/sender-ip [chars]/ target-mac [chars]/target-ip [chars]/ time-of-day [chars]]).
Recommended Action No action is required.
Error Message DHCP_SNOOP-4-ACL_PERMIT: [dec] ARP messages ([chars]) on [chars], vlan [dec]. ([[chars]/[chars]/[chars]/[chars]/[chars]])Explanation Packet-count [dec] ARPs (arp-type [chars]) on interface [chars], vlan [dec]. ([sender-mac [chars]/sender-ip [chars]/ target-mac [chars]/target-ip [chars]/ time-of-day [chars]]).
Recommended Action No action is required.
Error Message DHCP_SNOOP-4-DHCP_SNOOPING_DENY: [dec] Invalid ARP messages ([chars]) on [chars], vlan [dec]. ([[chars]/[chars]/[chars]/[chars]/[chars]])Explanation Packet-count [dec] Invalid ARPs (arp-type [chars]) on interface [chars], vlan [dec]. ([sender-mac [chars]/sender-ip [chars]/ target-mac [chars]/target-ip [chars]/ time-of-day [chars]]).
Recommended Action No action is required.
Error Message DHCP_SNOOP-4-DHCP_SNOOPING_PERMIT: [dec] ARP messages ([chars]) on [chars], vlan [dec]. ([[chars]/[chars]/[chars]/[chars]/[chars]])Explanation Packet-count [dec] ARPs (arp-type [chars]) on interface [chars], vlan [dec]. ([sender-mac [chars]/sender-ip [chars]/ target-mac [chars]/target-ip [chars]/ time-of-day [chars]]).
Recommended Action No action is required.
Error Message DHCP_SNOOP-4-ERROR_DISABLED: Interface [chars] has moved to error disabled state due to excessive rate [dec] of ingress ARP packetsExplanation Interface [chars] has moved to error disabled state due to excessive rate [dec] of ingress ARP packets.
Recommended Action No action is required.
Error Message DHCP_SNOOP-4-INVALID_ARP: [dec] Invalid ARP messages ([chars]) on [chars], vlan [dec]. ([[chars]/[chars]/[chars]/[chars]/[chars]])Explanation Packet-count [dec] Invalid ARPs (arp-type [chars]) on interface [chars], vlan [dec]. ([sender-mac [chars]/sender-ip [chars]/ target-mac [chars]/target-ip [chars]/ time-of-day [chars]]).
Recommended Action No action is required.
DHCP_SNOOP-6
Error Message DHCP_SNOOP-6-DAIVLANDISABLE: DAI disabled on vlan [dec]Explanation Dynamic ARP Inspection was disabled on a given vlan. [dec] is the VLAN-ID that identifies the vlan.
Recommended Action No action is required.
Error Message DHCP_SNOOP-6-DAIVLANENABLE: DAI enabled on vlan [dec]Explanation Dynamic ARP Inspection was enabled on a given vlan. [dec] is the VLAN-ID that identifies the vlan.
Recommended Action No action is required.
Error Message DHCP_SNOOP-6-DHCPEXIT: DHCP Daemon shutting down gracefully.Explanation DHCP Daemon is shutting down gracefully.
Recommended Action No action is required.
Error Message DHCP_SNOOP-6-DHCPHOSTADD: A new Host is [chars] connected to interface [chars] in VLAN [dec] and is allocated IP address [chars] for [dec] secs.Explanation A Host identified by [chars] has been added. [chars] identifies the interface. [dec] identifies the VLAN. [chars] identifies IP address. [dec] identifies the lease time in secs.
Recommended Action No action is required.
Error Message DHCP_SNOOP-6-DHCPLEASEEXPIRE: Lease expired for host [chars] having IP address [chars] connected to interface [chars] in VLAN [dec] for lease [dec] secs.Explanation The lease for host identified by [chars] with IP address [chars] connected to interface [chars] in VLAN [dec] with lease [dec] has expired.
Recommended Action No action is required.
Error Message DHCP_SNOOP-6-DHCPPERMITTEDARP: ARP frame permitted due to DHCP snooping binding on interface [chars] vlan [dec] sender mac [chars] sender ip [chars] target mac [chars] target ip [chars].Explanation [chars] identifies interface and [dec] identifies the vlan on which ARP packets have been permitted. [chars] identifies sender mac and [chars] identifies the sender ip. [chars] identifies the target mac and [chars] identifies the target ip.
Recommended Action No action is required.
Error Message DHCP_SNOOP-6-DHCPUP: DHCP Daemon Up.Explanation DHCP Daemon was created successfully and is up and running.
Recommended Action No action is required.
Error Message DHCP_SNOOP-6-INFO: [chars]Explanation An event during switchover. [chars] explains the reason for the failure.
Recommended Action No action is required.
Error Message DHCP_SNOOP-6-INTFDISABLE: IP Src Guard disabled on intf [chars]Explanation IP Src Guard was disabled on a given intf. [chars] is the intf-ID string that identifies the intf.
Recommended Action No action is required.
Error Message DHCP_SNOOP-6-INTFENABLE: IP Src Guard enabled on intf [chars]Explanation IP Src Guard was enabled on a given intf. [chars] is the intf-ID string that identifies the intf.
Recommended Action No action is required.
Error Message DHCP_SNOOP-6-VLANDISABLE: DHCP Snooping disabled on vlan [dec]Explanation DHCP Snooping was disabled on a given vlan. [dec] is the VLAN-ID that identifies the vlan.
Recommended Action No action is required.
Error Message DHCP_SNOOP-6-VLANENABLE: DHCP Snooping enabled on vlan [dec]Explanation DHCP Snooping was enabled on a given vlan. [dec] is the VLAN-ID that identifies the vlan.
Recommended Action No action is required.
DIAG_PORT_LB Messages
This section contains the DIAG_PORT_LB messages.
DIAG_PORT_LB-2
Error Message DIAG_PORT_LB-2-DIAG_FWD_PATH_SETUP_FAILURE: [chars]. Module:[dec] Error:[chars].Explanation Forwarding path setup for port loopback tests failed.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-2-LCM_RESP_SEND_FAILURE: LC Inserted request response send to Module Manager failed . Error:[chars]Explanation Failed to send the response for LC insertion to Module Manager.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-2-LIF_GET_ERROR: [chars]([dec]) [chars] Error:[chars]Explanation Port Loopback test process failed to get Diagnostic LIF id.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-2-MALLOC_FAILURE: [chars]([dec]) Memory allocation failed.Explanation Port Loopback test process could not allocate enough memory.
Recommended Action No action is required.
DIAG_PORT_LB-3
Error Message DIAG_PORT_LB-3-DIAG_PKT_SEND_FAILURE: [chars]([dec]) [chars]. Error:[chars]Explanation Port Loopback test process failed to send loopback packets.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-FSM_LIB_ERROR: [chars]([dec]) [chars]. Error:[chars]Explanation Port Loopback test process failed in MTS API.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-GET_DIAG_BD_FAIL: [chars]([dec]) Failed to get the BD for Diag VLAN:[dec]. Error:[chars].Explanation Failed to get the BD corresponding to the Diag VLAN.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-IFINDEX_LIB_FAILURE: [chars]([dec]) [chars] [chars]:[hex] [chars] [chars]Explanation Port Loopback test process failed in if_index library API.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-INVALID_TEST_REQUEST: [chars]([dec]) [chars]:[dec]Explanation Port Loopback test process failed to get test request info.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-INVALID_TEST_RUN: [chars]([dec]) [chars]:[dec]Explanation Port Loopback test process failed to get the current test run information.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-MTS_LIB_ERROR: [chars]([dec]) [chars]. Error:[chars]Explanation Port Loopback test process failed in MTS API.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-PDB_LIB_API_ERROR: Failed to [chars]. Error:[dec].Explanation The port loopback test was not able to get chassis information.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-PIXM_LIB_ERROR: [chars]([dec]) Failed to convert [chars]:[hex] to [chars]. Error:[chars]Explanation Port Loopback test process failed to convert port ifindex <-> port index.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-PORT_CFG_REQ_SEND: [chars]([dec]) Failed to send request to configure port ifindex:[dec] for port loopback testExplanation Failed to configure/restore the port to do/cleanup port loopback testing.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-PORT_CLIENT_LIB_ERROR: [chars]([dec]) [chars]. Error:[chars]Explanation Port Loopback test process failed in Port Client API.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-PORTLOOPBACK_TEST_FAIL: Module:[dec] Test:PortLoopback failed [dec] consecutive times. Faulty module:[dec] affected ports:[chars] Error:[chars]Explanation PortLoopback test failed on the module consecutively.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-PROC_INIT_FAILURE: [chars]([dec]) [chars] Error:[chars]Explanation Port Loopback test process failed in process initialization.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-RESULT_ADD_FAILURE: [chars]([dec]) [chars]:[dec]Explanation Port Loopback test process failed to add the port test result.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-RESULT_SEND_FAILURE: [chars]([dec]) [chars]Explanation Port Loopback test process failed to send the test results.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-REWRITE_ENGINE_LOOPBACK_TEST_FAIL: Module:[dec] Test:RewriteEngine Loopback failed [dec] consecutive times. Faulty module:[dec] affected ports:[chars] Error:[chars]Explanation Rewrite Engine Loopback test failed on the module consecutively.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-RW_ENGINE_LOOPBACK_TEST_SPINE_PATH_FAIL: Module:[dec] Test:RewriteEngine Loopback Spine path:[dec] failed [dec] consecutive times. Error:[chars]Explanation Rewrite Engine Loopback test failed on the spine path consecutively.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-SOCKET_ERROR: [chars]([dec]) [chars] Error:[chars]Explanation Port Loopback test process failed in socket operations.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-STATS_LIB_ERROR: [chars]([dec]) [chars]:[dec]Explanation Port Loopback test process failed in stats infra lib API.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-TEST_RES_SEND_FAIL: Failed to send [chars] test results back to Diagnostics Infrastucture. Error:[chars].Explanation The port loopback test was not able to send the test results.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-TIMER_LIB_ERROR: [chars]([dec]) [chars]Explanation Port Loopback test process timer handling failure.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-VLAN_ERROR: [chars]([dec]) [chars] Error:[chars]Explanation Port Loopback test process failed to get Diagnostic VLAN information.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-VQI_GET_FAIL: Failed to get the Diag VQi from XBM. Error:[chars]Explanation Rewrite Engine Loopback test failed to get the Diag VQi from XBAR Mgr.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-XBM_CFG_REQ_FAIL: Failed to conigure the XBAR mask while running the RewriteEngineLoopback test. Error:[chars]. Module:[dec] could have gone offlineExplanation Rewrite Engine Loopback test failed to set the XBAR mask while running the test. The target module could have gone offline.
Recommended Action No action is required.
DIAG_PORT_LB-5
Error Message DIAG_PORT_LB-5-DIAG_PORT_LB_DISABLED: DIAG_PORT_LB DisabledExplanation DIAG_PORT_LB Service Disabled.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-5-DIAG_PORT_LB_ENABLED: DIAG_PORT_LB EnabledExplanation DIAG_PORT_LB Service nabled.
Recommended Action No action is required.
DIAGCLIENT Messages
This section contains the DIAGCLIENT messages.
DIAGCLIENT-2
Error Message DIAGCLIENT-2-DIAG_BOOTUP_COMPLETE: Module <[dec]> Bootup Test <[chars]> has reported <[chars]>Explanation Bootup Test completed.
Recommended Action Nothing to be done if the test reports SUCCESS otherwise copy the error message exactly as it appears on the console, gather the output of show tech-support, and contact your Cisco technical support representative with the gathered information.
Error Message DIAGCLIENT-2-EEM_ACTION_HM_SHUTDOWN: Test <[chars]> has been disabled as a part of default EEM actionExplanation Informational Syslog.
Recommended Action No action is required.
Error Message DIAGCLIENT-2-PSS_READ_FAILURE: Read from PSS failed on Module <[dec]>Explanation Read operation from PSS store failed.
Recommended Action No action is required.
Error Message DIAGCLIENT-2-PSS_WRITE_FAILURE: Write to PSS failed on Module <[dec]>Explanation Write operation on PSS store failed.
Recommended Action No action is required.
DIAGCLIENT-3
Error Message DIAGCLIENT-3-DIAG_HM_FAIL: Module <[dec]> Health Monitoring Test <[chars]> has failed. Please use 'show diagnostic result <target>' to see test resultsExplanation A Health Monitoring Test has reported failure.
Recommended Action Ensure the line card is firmly in the slot, reseat if necessary, and attempt to run the test again if the line card is not seated properly in the slot. If the line card was properly seated in the slot, copy the error message exactly as it appears on the console, gather the output of show tech-support, and contact your Cisco technical support representative with the gathered information.
Error Message DIAGCLIENT-3-ONDEMAND_FAIL_EXCESS: Module <[dec]> Test <[chars]> has failed more than <[dec]> number of timesExplanation Ondemand test has failed more than configured number of times.
Recommended Action Copy the error message exactly as it appears on the console, gather the output of show tech-support, and contact your Cisco technical support representative with the gathered information.
Error Message DIAGCLIENT-3-PER_PORT_TEST_FAIL: Module <[dec]> Test <[chars]> has failed on Ports <[chars]> Please use 'show diagnostic result <target>' to see test resultsExplanation Per Port Test has failed on the above all ports.
Recommended Action No action is required.
DIAGCLIENT-4
Error Message DIAGCLIENT-4-LC_OFFLINE_FOR_CURR_SLOT: Received LC offline event for the current slot:[dec]. Ignoring itExplanation Informational Syslog.
Recommended Action No action is required.
Error Message DIAGCLIENT-4-MTS_SEND_FAILURE: MTS send failed, mts_opc: [chars], dest slot: [dec], dest SAP: [dec], error-id: [hex]Explanation MTS send reports failure.
Recommended Action No action is required.
DIAGCLIENT-5
Error Message DIAGCLIENT-5-CALLOC_FAILURE: Memory allocation failedExplanation DiagClient process could not allocate enough memory.
Recommended Action No action is required.
Error Message DIAGCLIENT-5-DIAG_SCHED_COMPLETE: Module <[dec]> Test <[chars]> has completed Scheduled TestingExplanation A scheduled Test was completed.
Recommended Action No action is required.
Error Message DIAGCLIENT-5-ONDEMAND_FAIL: Module <[dec]> Test <[chars]> has failed in Test_Iteration <[dec]>Explanation The specified test has reported FAILURE in this Iteration.
Recommended Action No action is required.
Error Message DIAGCLIENT-5-ONDEMAND_SUCCESS: Module <[dec]> Test <[chars]> has completed successfully in Test_Iteration <[dec]>Explanation The specified test has reported SUCCESS in this Iteration.
Recommended Action No action is required.
DIAGMGR Messages
This section contains the DIAGMGR messages.
DIAGMGR-2
Error Message DIAGMGR-2-MTS_SEND_FAILURE: MTS send failed, mts_opc: [chars], dest slot: [dec], dest SAP: [dec], error-id: [hex]Explanation MTS send reports failure.
Recommended Action No action is required.
Error Message DIAGMGR-2-PSS_DELETE_FAILURE: Read from PSS failed on Module <[dec]>Explanation Read operation from PSS store failed.
Recommended Action No action is required.
Error Message DIAGMGR-2-PSS_WRITE_FAILURE: Write to PSS failed on Module <[dec]>Explanation Write operation on PSS store failed.
Recommended Action No action is required.
DIAGMGR-3
Error Message DIAGMGR-3-DIAG_MAJOR_DEFECT: Module <[dec]> Test <[chars]> detected a Major Error Please use 'show diagnostic result <target>' to see test resultsExplanation A major error was detected during diagnostic testing.
Recommended Action Re-seat the card and retry the test. If the same result occurs after reseating the card and retrying the test, copy the error message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information.
Error Message DIAGMGR-3-DIAG_MINOR_DEFECT: Module <[dec]> Test <[chars]> detected a Minor Error Please use 'show diagnostic result <target>' to see test resultsExplanation A mior error was detected during diagnostic testing.
Recommended Action Re-seat the card and retry the test. If the same result occurs after reseating the card and retrying the test, copy the error message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information.
Error Message DIAGMGR-3-GET_CURR_SLOT_FAIL: Failed to get the current slot for the process. Error:[chars]Explanation The process initialization failed to get the current slot.
Recommended Action This is an informational message stating that a process initialization failure.
DIAGMGR-4
Error Message DIAGMGR-4-CURR_SLOT_OFFLINE: Recevied an LC offline event for the current slot:[dec]. Ignoring itExplanation The process received an offline event for the slot it is running. Ignoring it.
Recommended Action This is an informational message stating that an unexpected event has been encountered.
Error Message DIAGMGR-4-DISRPT_TST_START: Starting Test <[chars]> on Module <[dec]> is DisruptiveExplanation Starting a Disruptive Test can disturb the system's normal functionality.
Recommended Action Reset target module.
Error Message DIAGMGR-4-FIXED_INTRVL_CHANGED: The users are not allowed to change monitoring interval of Test <[chars]>Explanation The specified health monitoring test interval is not user-configurable and therefore cannot be changed.
Recommended Action No action is required.The specific health monitoring interval is not user- configurable by design so nothing can be done to change the interval.
DIAGMGR-5
Error Message DIAGMGR-5-BOOTUP_CONF: Diagnostic Bootup Level: <[chars]>Explanation Current Diagnostic BootUp Level being configure or changed.
Recommended Action No action is required.
Error Message DIAGMGR-5-CALLOC_FAILURE: Memory allocation failureExplanation Memory allocation in a call to malloc/calloc has failed.
Recommended Action No action is required.
Error Message DIAGMGR-5-CHANGE_ALWAYS_HM: Health Monitoring test <[chars]> in Module <[dec]> is a must run and cannot be modifiedExplanation The specified health monitoring test must be run and cannot be disabled.
Recommended Action No action is required.The specific health monitoring test cannot be disabled by design. The system is working properly.
Error Message DIAGMGR-5-HM_START: Health monitoring test <[chars]> for Module <[dec]>Explanation Health Monitoring Test started.
Recommended Action No action is required.
Error Message DIAGMGR-5-HM_STOP: Disabling health monitoring test <[chars]> for Module <[dec]>Explanation Health Monitoring Test has been stopped It can be enabled through the diagnostic monitor..... command.
Recommended Action No action is required.
Error Message DIAGMGR-5-INTRVL_INCORRECT: Monitoring Interval is less than minimum of [dec] seconds required for Module <[dec]> test <[chars]>Explanation Health Monitoring cannot be enabled for the specified test because the interval for the test has been incorrectly set.
Recommended Action The system is working properly and no action is required. If you want to specify a smaller testing interval, the error message text provides the lowest possible configurable interval for the specified monitoring interval.
Error Message DIAGMGR-5-MODULE_MISSING: Diagnostic command issued on non-existing Module <[dec]>Explanation A line card could not be located in a slot where a diagnostic action was requested.
Recommended Action Ensure the targeted line card is properly seated in the specified slot. If the line card is properly seated, ensure the correct slot was indicated in the command-line interface. If the line card is well-seated and the correct slot was specified, copy the error message exactly as it appears on the screen as well as the output of show tech-support and paste the output into a separate file. Contact your technical support representative with the gathered information.
Error Message DIAGMGR-5-NONHM_AS_HM: The Test <[chars]> cannot be used as health monitoring testExplanation Non-HM test cannot be scheduled to run as a Health Monitoring test.
Recommended Action No action is required.
DIAGMGR-6
Error Message DIAGMGR-6-BOOTUP_DIAG_OK: Module <[dec]>: Passed Online DiagnosticsExplanation The diagnostic tests did not detect any error on the card.
Recommended Action This is an informational message stating that the line card passed the diagnostic tests.
Error Message DIAGMGR-6-BOOTUP_TEST_STARTED: Module <[dec]>: Running [chars] DiagnosticsExplanation Starting bootup testing for above module.
Recommended Action No action is required.
DMM-SLOT# Messages
This section contains the DMM-SLOT# messages.
DMM-SLOT#-5
Error Message DMM-SLOT#-5-LOG_ERR_DMM_NEW_NPORT_SRVR_ZONE: Job Id:%Ld VSAN :[dec] New N-Port FCID :[hex] Server FCID:[hex] are in the same zone. ALERT!!Explanation A New N-Port has come up which is zoned in the same zone as the Server.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_ERR_DMM_NEW_NPORT_STG_ZONE: Job Id:%Ld VSAN :[dec] New N-Port FCID :[hex] Storage FCID:[hex] are in the same zone. ALERT!!Explanation A New N-Port has come up which is zoned in the same zone as the Storage.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_ERR_DMM_SRVR_RSCN: Job Id:%Ld Server N-Port pWWN:0x%Lx [chars]Explanation An RSCN event was received for the Server associated with a Job.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_ERR_DMM_STG_RSCN: Job Id:%Ld N-Port pWWN:0x%Lx Storage:[chars] [chars]Explanation An RSCN event was received for the Storage associated with a Job.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_COMPLETE: Job Id:%Ld NumSession:[dec]Explanation Event indicating the completion of a Data Migration Job.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_ERROR: Job Id:%Ld NumSession:[dec]Explanation Event indicating the Suspension of Data Migration Job.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_ERROR_LOST_SSM_PEER_CONNECTION: Job Id:%Ld NumSession:[dec]Explanation Event indicating the Suspension of Data Migration Job due to loss in ip connectivity to peer ssm.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_FINISH: Job Id:%Ld NumSession:[dec]Explanation Event indicating Finish-request for a Method-2 Data Migration Job.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_START: Job Id:%Ld NumSession:[dec]Explanation Event indicating the start of a Data Migration Job.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_STOP: Job Id:%Ld NumSession:[dec]Explanation Event indicating that the Data Migration Job was stopped by Administrator.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_TCP_CONNECTION_DOWN: Job Id:%Ld lost connection to peer [chars]. Job may be RESETExplanation Event indicating IP Connectivity loss to peer SSM. Affected Job may be RESET.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_VERIFY_COMPLETE: Job Id:%Ld NumSession:[dec]Explanation Event indicating the completion of a Data Migration Job Verification.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_VERIFY_ERROR: Job Id:%Ld NumSession:[dec]Explanation Event indicating the Suspension of Data Migration Job Verification due to an error.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_VERIFY_START: Job Id:%Ld NumSession:[dec]Explanation Event indicating the start of a Data Migration Job Verification.
Recommended Action No action is required.
Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_VERIFY_STOP: Job Id:%Ld NumSession:[dec]Explanation Event indicating the Suspension of Data Migration Job Verification by the user.
Recommended Action No action is required.
DOT1X Messages
This section contains the DOT1X messages.
DOT1X-2
Error Message DOT1X-2-DOT1X_INIT: Dot1x unable to startExplanation The system failed to create the Dot1x process.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
DOT1X-3
Error Message DOT1X-3-ERR_SPANDST: It is configured as a SPAN Dest port.Explanation Dot1x and SPAN Dest ports are mutually exclusive features.
Recommended Action Disable SPAN destination port configuration first before reconfiguring Dot1x on the port.
Error Message DOT1X-3-INVALID_INPUT: Invalid on interface [chars].Explanation The Dot1x interface parameter is out of the specified range or is invalid.
Recommended Action Refer to the CLI help documentation to determine the valid 802.1x parameters.
Error Message DOT1X-3-MEM_UNAVAIL: perform the 802.1X action.Explanation Insufficient system memory is available to perform the Dot1x Authentication.
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.
Error Message DOT1X-3-NOT_DOT1X_CAPABLE: interface [chars] because it is not a physical Ethernet interface.Explanation Dot1x Authentication can only be enabled on physical Ethernet interfaces.
Recommended Action Enable Dot1x Authentication on physical Ethernet interfaces only.
Error Message DOT1X-3-SM_INIT: Internal error while initializing state machine [chars], state [chars]: [chars]Explanation An attempt was made to initialize an invalid state machine.
Recommended Action Initialize dot1x state machine.
DOT1X-4
Error Message DOT1X-4-BADEVENT: Event [chars] is invalid for the current state [chars]: [chars] [chars]Explanation An attempt was made to post an event to a state machine that is invalid for the current state.
Recommended Action Initialize dot1x state machine.
Error Message DOT1X-4-MAB_DISABLED: Interface [chars] is in Trunk mode, MAB is not supported on this portExplanation MAB is not supported on Trunk port.
Recommended Action To enable MAB make sure that port is not in trunk mode.
Error Message DOT1X-4-MAB_DISABLED_ON_PCM: Interface [chars] is a member of portchannel, MAB is not supported on this portExplanation MAB is not supported on port channel member port.
Recommended Action To enable MAB make sure that port is not member of port channel.
Error Message DOT1X-4-MULTIHOST_ON_PCM: Interface [chars] is a member of portchannel, dot1x host mode will be multi-host and changing it to single-host mode won't be supportedExplanation Current Port is a member of port channel, so dot1x host mode has to be in multi-host mode.
Recommended Action To change host mode, ensure that port is not a member of port channel.
Error Message DOT1X-4-STOPPED: Event [chars] ignored because the state machine is stopped: [chars] [chars]Explanation An attempt was made to post an event to a state machine that has already been stopped.
Recommended Action An internal error has occurred with the state machine. The traceback should indicate the guilty party.
Error Message DOT1X-4-TO_MULTIHOST: Interface [chars] is in trunk mode, dot1x host mode will be multi-host and changing it to single-host mode won't be supportedExplanation Current Port is in trunk mode, so dot1x host mode has to be in multi-host mode.
Recommended Action To change host mode, ensure that port is not in trunk mode.
DOT1X-5
Error Message DOT1X-5-DOT1X_DISABLED: dot1x DisabledExplanation Dot1x Service Disabled.
Recommended Action No action is required.
Error Message DOT1X-5-DOT1X_ENABLED: dot1x EnabledExplanation Dot1x Service Enabled.
Recommended Action No action is required.
Error Message DOT1X-5-INVALID_MAC: broadcast or multicast mac address) [chars] is trying to authenticate.Explanation Authentication using 802.1x is not allowed for zero, broadcast, and multicast source MAC addresses.
Recommended Action Connect a Dot1x supported Host to the Dot1x enabled port.
Error Message DOT1X-5-SECURITY_VIOLATION: New MAC address [chars] is seen on interface [chars] in [chars] modeExplanation The port on the interface specified in the error message is configured in single host mode. Any new host that is detected on the interface is treated as a security violation. The port has been Error disabled.
Recommended Action Ensure that the port is configured to use only one host. Enter the <Cmd>shutdown<Cmd> followed by <CmdBold>no shutdown<CmdBold> command to restart the port.
Error Message DOT1X-5-SESSION_CREATION: Dot1x authentication session initiated in interface [chars] using authentication method [chars]Explanation Dot1x authentication session has been created after successful authentication of supplicannot.
Recommended Action No action is required.
Error Message DOT1X-5-SESSION_TERMINATION: Dot1x authentication session in interface [chars] using authentication method [chars] is terminated because of [chars] and port moved to [chars] stateExplanation Dot1x authentication session has been terminated.
Recommended Action No action is required.
Error Message DOT1X-5-STATUS: Dot1x interface [chars] status changed from [chars] to [chars]Explanation Dot1x authenticator has changed its internal state.
Recommended Action No action is required.
DPP_DEBUG Messages
This section contains the DPP_DEBUG messages.
DPP_DEBUG-2
Error Message DPP_DEBUG-2-DPP_CRIT: [DPP[dec]] [chars]Explanation A DPP generated a critical message.
Recommended Action No action is required.
DPVM Messages
This section contains the DPVM messages.
DPVM-2
Error Message DPVM-2-ALLOC_FAILED: Memory allocation failed for size:[dec] for [chars]Explanation Memory allocation failed for size [dec] for [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DPVM-2-DPVM_DUPL_REJECT: [chars]Explanation Rejected duplicate pwwn query.
Recommended Action Dpvm overwrite-duplicate-pwwn.
DPVM-3
Error Message DPVM-3-DB_ERR: [chars]Explanation An error occurred during an DPVM database operation. [chars] indicates the reason for the error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DPVM-3-DDAS_MODE_INVALID: [chars]Explanation DDAS mode Invalid. [chars].
Recommended Action Flip DDAS mode.
Error Message DPVM-3-INIT_FAIL: [chars]Explanation An error occurred during DPVM Initialization. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DPVM-3-MTS_ERR: [chars]Explanation An error occurred in processing of an MTS message. [chars] indicates the error that occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message DPVM-3-PSS_ERR: [chars]Explanation An error occurred during an DPVM PSS operation. [chars] indicates the PSS operation that caused the error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
DPVM-4
Error Message DPVM-4-ACTIVATION_FAIL: [chars]Explanation Activation of DPVM device mappings failed due to [chars].
Recommended Action Correct the error and reactivate database again.
Error Message DPVM-4-FEATURE_DISABLED: [chars]Explanation DPVM is unavailable and disabled now.
Recommended Action No action is required.
DPVM-6
Error Message DPVM-6-FEATURE_ENABLED: [chars]Explanation DPVM is available and enabled now.
Recommended Action No action is required.
Error Message DPVM-6-INFO: [chars]Explanation An event happened that affects DPVM. [chars] indicates the event.
Recommended Action No action is required.
DSTATS Messages
This section contains the DSTATS messages.
DSTATS-2
Error Message DSTATS-2-PSS_INIT_FAIL: pss initialization failed due to error: [hex]Explanation Dstats process pss initialization failure due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
DSTATS-3
Error Message DSTATS-3-PSS_CREATE_FAIL: pss create runtime database failed due to error: [hex]Explanation Dstats process pss create runtime database failure due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
Error Message DSTATS-3-PSS_DELETE_FAIL: pss delete runtime entry key:[hex] failed due to error: [hex]Explanation Dstats process pss delete runtime entry key [hex] failure due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
Error Message DSTATS-3-PSS_MAX_KEY_FAIL: pss set runtime max key failed due to error: [hex]Explanation Dstats process pss set runtime max key failure due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
Error Message DSTATS-3-PSS_MAX_VALUE_FAIL: pss set runtime max value failed due to error: [hex]Explanation Dstats process pss set runtime max value failure due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
Error Message DSTATS-3-PSS_OPEN_FAIL: pss open runtime database failed due to error: [hex]Explanation Dstats process pss open runtime database failure due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
Error Message DSTATS-3-PSS_RELOAD_FAIL: pss reload runtime database failed due to error: [hex]Explanation Dstats process pss reload runtime database failure due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
Error Message DSTATS-3-PSS_SNAPSHOT_DEBUG_FAIL: pss snapshot runtime debug to uri:[chars] failed due to error: [hex]Explanation Dstats process pss snapshot of runtime debug to uri [string] failed due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
Error Message DSTATS-3-PSS_SNAPSHOT_FAIL: pss snapshot runtime to uri:[chars] failed due to error: [hex]Explanation Dstats process pss snapshot of runtime to uri [string] failed due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
Error Message DSTATS-3-PSS_STORE_FAIL: pss store runtime entry key:[hex] val:[hex] failed due to error: [hex]Explanation Dstats process pss store runtime entry key [hex] value [hex] failure due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
ELTM Messages
This section contains the ELTM messages.
ELTM-2
Error Message ELTM-2-INTERFACE_INTERNAL_ERROR: Internal error: [chars]:[chars], collect output of show tech-support eltmExplanation An internal error has occurred. Collect show tech-support eltm for futher analysis.
Recommended Action No action is required.
Error Message ELTM-2-INTERNAL_ERROR: Internal error: [chars], collect output of show tech-support eltmExplanation An internal error has occurred. Collect show tech-support eltm for futher analysis.
Recommended Action No action is required.
Error Message ELTM-2-INTF_NOT_FOUND: Interface [chars] not found in ELTM database [chars]Explanation ELTM database does not have the interface.
Recommended Action No action is required.
Error Message ELTM-2-INTF_NOT_SUPP: Interface [chars] not supported by ELTM [chars]Explanation ELTM does not support the interface for the specified operation.
Recommended Action No action is required.
Error Message ELTM-2-INTF_TO_LTL: Failed to get LTL for interface [chars] return status [chars]Explanation ELTM Failed to get LTL for interface. Packets received on this interface might not be handled correctly by the forwarding engine.
Recommended Action No action is required.
ELTMC-SLOT# Messages
This section contains the ELTMC-SLOT# messages.
ELTMC-SLOT#-2
Error Message ELTMC-SLOT#-2-ELTMC_INTERFACE_INTERNAL_ERROR: Internal error: [chars]:[chars], collect output of show tech-support eltmExplanation An internal error has occurred. Collect show tech-support eltm for futher analysis.
Recommended Action No action is required.
Error Message ELTMC-SLOT#-2-ELTMC_INTERNAL_ERROR: Internal error: [chars], collect output of show tech-support eltmExplanation An internal error has occurred. Collect show tech-support eltm for futher analysis.
Recommended Action No action is required.
Error Message ELTMC-SLOT#-2-ELTMC_INTF_NOT_FOUND: Interface [chars] not found in ELTM database [chars]Explanation ELTM database does not have the interface.
Recommended Action No action is required.
Error Message ELTMC-SLOT#-2-ELTMC_INTF_NOT_SUPP: Interface [chars] not supported by ELTM [chars]Explanation ELTM does not support the interface for the specified operation.
Recommended Action No action is required.
Error Message ELTMC-SLOT#-2-ELTMC_INTF_TO_LTL: Failed to get LTL for interface [chars] return status [chars]Explanation ELTM Failed to get LTL for interface. Packets received on this interface might not be handled correctly by the forwarding engine.
Recommended Action No action is required.
Error Message ELTMC-SLOT#-2-ELTMC_INTF_TO_SLOT: Failed to get slot for interface [chars] return status [chars]Explanation ELTM Failed to get Slot for interface. Port-channels and L2 Learning might be affected.
Recommended Action No action is required.
Error Message ELTMC-SLOT#-2-ELTMC_L2_LIF_ALLOC_FAIL_INTF: Failed to allocate L2 LIF entries in forwarding engine for interfac [chars]Explanation ELTM Failed to allocateate L2 LIF entries in forwarding engine. This will affect Layer 2 and Layer 3 forwarding for the interface.
Recommended Action No action is required.
Error Message ELTMC-SLOT#-2-ELTMC_L2_LIF_ALLOC_FAIL_VDC: Failed to allocate L2 LIF entries in forwarding engineExplanation ELTM Failed to allocateate L2 LIF entries in forwarding engine. This will affect Layer 2 and Layer 3 forwarding in this VDC.
Recommended Action No action is required.
Error Message ELTMC-SLOT#-2-ELTMC_L3_INGRESS_LIF_ALLOC_FAIL_INTF: Failed to allocate L3 Ingress LIF entries in forwarding engine for interfac [chars]Explanation ELTM Failed to allocateate L3 Ingress LIF entries in forwarding engine. This will affect Layer 3 forwarding for the interface.
Recommended Action No action is required.
Error Message ELTMC-SLOT#-2-ELTMC_RSVD_VLAN: Failed to get the reserved vlans. Failed with error [chars]Explanation ELTM Failed to get the reserved VLANs. This will affect multicast forwarding on SVI interfaces.
Recommended Action No action is required.
Error Message ELTMC-SLOT#-2-ELTMC_VLAN_INTERNAL_ERROR: Internal error: VLAN [dec]:[chars], collect output of show tech-support eltmExplanation An internal error has occurred. Collect show tech-support eltm for futher analysis.
Recommended Action No action is required.
EOU Messages
This section contains the EOU messages.
EOU-2
Error Message EOU-2-PBACL_APPLICATION_FAILURE: [chars] of host [chars] to/from pbacl group [chars] failed. Error : [chars]Explanation Failure of host addition/deletion to/from pbacl group.
Recommended Action Verify the addition/deletion of the host using the cli show object-group. If it was a delete request that failed, manual deletion of the host from the group is recommended.
EOU-5
Error Message EOU-5-L2NAC_DISABLED: EOU DisabledExplanation Service EOU Disabled.
Recommended Action No action is required.
Error Message EOU-5-L2NAC_ENABLED: EOU EnabledExplanation Service EOU enabled.
Recommended Action No action is required.
EOU-6
Error Message EOU-6-AAA_DOWN: Default Policy ip: [chars]:retainedExplanation Policy retained.
Recommended Action No action is required.
Error Message EOU-6-AUTHTYPE: Authtype: ip: [chars] Authtype:[chars]Explanation Authentication type.
Recommended Action No action is required.
Error Message EOU-6-BAD_PKT: Bad Packet: ip: [chars] Why: [chars]Explanation Bad Packet because of reason specified.
Recommended Action No action is required.
Error Message EOU-6-CTA: CTA: ip: [chars] status(detected/not detected): [chars]Explanation CTA detected or not.
Recommended Action No action is required.
Error Message EOU-6-IDENTITY_MATCH: Identity Match: ip: [chars] Policy: [chars]Explanation Identity Matched or not.
Recommended Action No action is required.
Error Message EOU-6-PBACL_APPLICATION_STATUS: [chars] of host [chars] to/from pbacl group [chars] succeededExplanation Status of host addition/deletion to pbacl group.
Recommended Action No action is required.
Error Message EOU-6-POLICY: Policy on ip: [chars]: [chars]: [chars]Explanation Policy applied.
Recommended Action No action is required.
Error Message EOU-6-POSTURE: Posture:ip: [chars] Status: [chars], Interface: [chars]Explanation Posture of host.
Recommended Action No action is required.
Error Message EOU-6-SESSION: Session ip: [chars] Action:[chars] , Interface: [chars]Explanation Session detected.
Recommended Action No action is required.
Error Message EOU-6-SOCKET: Service eou on port: [dec]Explanation Eou using above port.
Recommended Action No action is required.
Error Message EOU-6-SQ_EAP_MSG: Status Query: ip: [chars] status: [chars]Explanation Status query state.
Recommended Action No action is required.
Error Message EOU-6-UNKN_EVENT_ERR: Unknow Event Err: ip: [chars] Message: [chars]Explanation Error due to unknown event.
Recommended Action No action is required.
Error Message EOU-6-VERSION_MISMATCH: Eou version mismatch ip: [chars] and version [dec]Explanation Eou version mismatch.
Recommended Action No action is required.
EOU-7
Error Message EOU-7-EOU_DISABLED_INTF: eou disabled on interface [chars]Explanation Eou service disabled on interface.
Recommended Action No action is required.
Error Message EOU-7-EOU_ENABLED_INTF: eou enabled on interface [chars]Explanation Eou service enabled on interface.
Recommended Action No action is required.
EPP Messages
This section contains the EPP messages.
EPP-5
Error Message EPP-5-EPP_FAILURE: Interface [chars] EPP FailureExplanation Trunk protocol failed.
Recommended Action 'show epp internal event-history error' will indicate the errors encountered.
Error Message EPP-5-EPP_LOOPBACK: Interface [chars] is looped back to the same switchExplanation The interface is looped back to another interface on the same switch.
Recommended Action Check the connectivity of this interface and ensure that it is connected to another switch.
ETH-PORT-SEC Messages
This section contains the ETH-PORT-SEC messages.
ETH-PORT-SEC-3
Error Message ETH-PORT-SEC-3-ETH_PORT_SEC_CONFIG_MAC_FAILED: Failed to configure MACsExplanation Failed to configure MACs.
Recommended Action No action is required.
Error Message ETH-PORT-SEC-3-ETH_PORT_SEC_INVALID_VLAN: Invalid VLAN configurationExplanation Invalid VLAN configuration.
Recommended Action No action is required.
Error Message ETH-PORT-SEC-3-ETH_PORT_SEC_SECURITY_VIOLATION_ANOTHER_PORT: Host [chars] bound to Port [chars] in Vlan [dec] is trying to access Port [chars] in Vlan [dec]Explanation Moved the port to violation state due to a MAC address seen on one port being seen on another.
Recommended Action No action is required.
Error Message ETH-PORT-SEC-3-ETH_PORT_SEC_SECURITY_VIOLATION_MAX_MAC_VLAN: Port [chars] moved to [chars] state as host [chars] is trying to access the port in vlan [dec]Explanation Moved the port to violation state due to exceeding address count.
Recommended Action No action is required.
Error Message ETH-PORT-SEC-3-ETH_PORT_SEC_UNABLE_TO_DISABLE: Unable to disable eth_port_sec [chars].Explanation The system is unable to disable eth_port_sec Service.
Recommended Action No action is required.
Error Message ETH-PORT-SEC-3-ETH_PORT_SEC_UNABLE_TO_ENABLE: Unable to enable eth_port_sec [chars].Explanation The system is unable to enable eth_port_sec Service.
Recommended Action No action is required.
Error Message ETH-PORT-SEC-3-ETH_PORT_SEC_VIOL_UPDATE_FAILED: Failed to update violation modeExplanation Failed to update violation mode.
Recommended Action No action is required.
ETH-PORT-SEC-5
Error Message ETH-PORT-SEC-5-ETH_PORT_SEC_AGE_TIME_EXPIRY: Age Time expired for host [chars] in VLAN [dec] in port [chars]Explanation Age time expired for host.
Recommended Action No action is required.
Error Message ETH-PORT-SEC-5-ETH_PORT_SEC_DISABLED: eth_port_sec Disabled on if_index:[hex]Explanation Eth_port_sec Service Disabled.
Recommended Action No action is required.
Error Message ETH-PORT-SEC-5-ETH_PORT_SEC_DYNAMIC_MAC_ADDRESS_CLEARED: Dynamic MAC addresses for port [chars] clearedExplanation Dynamic MAC address for port cleared.
Recommended Action No action is required.
Error Message ETH-PORT-SEC-5-ETH_PORT_SEC_ENABLED: eth_port_sec Enabled on if_index:[hex]Explanation Eth_port_sec Service Enabled.
Recommended Action No action is required.
Error Message ETH-PORT-SEC-5-ETH_PORT_SEC_HOST_ADDITION: A new Host [chars] learnt on Port [chars] in Vlan [dec]Explanation A new host is learned on a port.
Recommended Action No action is required.
Error Message ETH-PORT-SEC-5-ETH_PORT_SEC_HOST_DELETION: Host [chars] bound to secure port [chars] in Vlan [dec] has been removedExplanation A host has been removed.
Recommended Action No action is required.
ETH_PORT_CHANNEL Messages
This section contains the ETH_PORT_CHANNEL messages.
ETH_PORT_CHANNEL-1
Error Message ETH_PORT_CHANNEL-1-LC_CFG_FAILURE: configuring module [dec] failed [[chars]]Explanation Module configuration failed.
Recommended Action Module will be automatically reset.
Error Message ETH_PORT_CHANNEL-1-MALLOC_FAILED: cannot allocate memory (size [dec])Explanation Not enough memory.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-1-MAP_PARAM_FAILURE: mapping parameter failed for [chars] [[chars]]Explanation Parameter mapping failed.
Recommended Action Specified service has failed; check its status.
Error Message ETH_PORT_CHANNEL-1-MCAST_SEND_FAILURE: failed to send multicast [chars]: [chars]Explanation Failed to send a multicast message to all modules, usually because some module went down.
Recommended Action Run show port channel consistency to check consistency.
ETH_PORT_CHANNEL-2
Error Message ETH_PORT_CHANNEL-2-RESET_MODULE: reset module [dec] for not responding or returning errorExplanation A module is reset for not responding or returning error.
Recommended Action No action is required.
ETH_PORT_CHANNEL-3
Error Message ETH_PORT_CHANNEL-3-ALL_DROP_TIMEOUT: Some component(s) timed out on dropping notif:[chars] (for:[chars]); Please collect <show system internal mts buffers details>Explanation Some component did not respond to a request in stipulated time.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ETH_PORT_CHANNEL-3-COMPAT_CHECK_FAILURE: [chars] is not compatibleExplanation Compatibility check failed when adding ports to port channel.
Recommended Action Make sure the compatibility parameters are consistent while adding ports to port channel, or use force option.
Error Message ETH_PORT_CHANNEL-3-GENERAL_ERROR: [chars]Explanation General error.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-3-LACP_ERROR: [chars] [chars]Explanation LACP error.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-3-MSG_SEND_FAILURE: failed to send [chars] to sap [dec]: [chars]Explanation Failed to send a message.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-3-PORT_CHANNEL_NOT_FOUND: [chars] is not foundExplanation Cannot find port channel in its database, which indicates an inconsistency with an external component.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-3-RSP_TIMEOUT: Component [chars] timed out on response to opcode:[chars] (for:[chars])Explanation Some component did not respond to a request in stipulated time.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ETH_PORT_CHANNEL-3-TIMEOUT: timed out after [dec] seconds [type [chars], state [chars]]Explanation Some operation timed out.
Recommended Action Run show port channel consistency to check all module connectivity and consistency.
ETH_PORT_CHANNEL-4
Error Message ETH_PORT_CHANNEL-4-PORT_CFG_DELETED: [chars] removed from [chars] (different module inserted)Explanation Port is removed from a port channel because a different module was inserted to the same slot.
Recommended Action You lost some ports from the port channel, check if you want to add ports in the new module to the same port-channel.
Error Message ETH_PORT_CHANNEL-4-PORT_INDIVIDUAL: port [chars] is operationally individualExplanation The port is operating as an individual link even though it is locally or remotely configured to be part of a port channel.
Recommended Action Check the configuration of the port locally and remotely to ensure that it can operate as part of a port channel.
Error Message ETH_PORT_CHANNEL-4-PORT_NOT_FOUND: port [chars] is not part of port-channelExplanation Cannot find the port in port channel database, which indicates an inconsistency with an external component.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-4-RACE_WARN: [chars]Explanation Warning of possible race condition.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-4-UNEXPECTED_RESPONSE: unexpected response [chars] from [chars]Explanation Received an unexpected response and discarded.
Recommended Action No action is required.
ETH_PORT_CHANNEL-5
Error Message ETH_PORT_CHANNEL-5-AUTO_CREATE_FAILURE: [chars] [chars]Explanation Auto create process on the port failed.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-CREATED: [chars] createdExplanation A port channel is created.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-DELETED: [chars] deletedExplanation A port channel is deleted.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-FOP_CHANGED: [chars]: first operational port changed from [chars] to [chars]Explanation The first operational port in a port channel is changed.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-IF_DOWN_SUSPENDED_BY_MODE: Interface [chars] is down (Suspended due to incompatible modeExplanation Compatibility check failed when adding ports to port channel.
Recommended Action Make sure the compatibility parameters are consistent between the ports and the port channel.
Error Message ETH_PORT_CHANNEL-5-IF_DOWN_SUSPENDED_BY_SPEED: Interface [chars] is down (Suspended due to incompatible speedExplanation Operational compatibility check failed on the port in a port channel.
Recommended Action Make sure the compatibility parameters are consistent between the ports and the port channel.
Error Message ETH_PORT_CHANNEL-5-MAX_CHANNEL_DISALLOWED: Module failed to come online because port channel interface <port-channel number> greater than [dec] is presentExplanation The port channel number configured on the switch is larger than 128.
Recommended Action Delete the set of port channel interface <port channel interface> which is greater than 128.
Error Message ETH_PORT_CHANNEL-5-PORT_ADDED: [chars] added to [chars]Explanation Ports are added to a port channel.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-PORT_DOWN: [chars]: [chars] is downExplanation Port goes down in a port channel.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-PORT_HOT_STANDBY: [chars]: [chars] goes to hot-standbyExplanation Port goes to hot-standby in a port channel.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-PORT_HOT_STANDBY_DOWN: [chars]: hot-standby port [chars] is downExplanation Port-channel hot-standby member goes down.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-PORT_INDIVIDUAL_DOWN: individual port [chars] is downExplanation Port-channel member operating in individual mode goes down.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-PORT_REMOVED: [chars] removed from [chars]Explanation Ports are removed from a port channel.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-PORT_SUSPENDED: [chars]: [chars] is suspendedExplanation Port is suspended in a port channel.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-PORT_UP: [chars]: [chars] is upExplanation Port comes up in a port channel.
Recommended Action No action is required.
ETH_PORT_CHANNEL-6
Error Message ETH_PORT_CHANNEL-6-RESYNC: resyncing [chars] with all modulesExplanation Resynchronizehronizationmodules with sup after an error or switchover.
Recommended Action No action is required.
ETH_PORT_CHANNEL-7
Error Message ETH_PORT_CHANNEL-7-GSYNC_DONE: global synchronization is doneExplanation Port-channel manager finished global synchronization.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-7-GSYNC_REQ: requesting global synchronizationExplanation Port-channel manager requested a global synchronization from active sup.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-7-START_ACTIVE: started in active modeExplanation Port-channel manager started in active mode.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-7-START_DEFAULT: started with default configurationExplanation Port-channel manager started with default configuration.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-7-START_STANDBY: started in standby modeExplanation Port-channel manager started in standby mode.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-7-START_STATEFUL: started statefullyExplanation Port-channel manager started with running configuration.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-7-START_STATELESS: started statelesslyExplanation Port-channel manager started with startup configuration.
Recommended Action No action is required.
ETHPORT Messages
This section contains the ETHPORT messages.
ETHPORT-2
Error Message ETHPORT-2-IF_CRITICAL_FAILURE: (Debug syslog)Critical failure: [chars], [chars]Explanation There was a critical failure in the component.
Recommended Action Follow instructions on the syslog.
Error Message ETHPORT-2-IF_DOWN_ERROR_DISABLED: Interface [chars] is down (Error disabled. Reason:[chars])Explanation The interface encountered an error while configuring it.
Recommended Action Collect more information about failed interface using command 'show port internal all interface [char]'. In most cases, you can recover using a 'shutdown' followed a 'no shutdown' on the interface or removing and re-inserting the fiber optic cable.
Error Message ETHPORT-2-IF_SEQ_ERROR: Error ([hex]) while communicating with component [chars] opcode:[chars] (for:[chars])Explanation Some component did not respond to a request in stipulated time.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ETHPORT-2-SEQ_TIMEOUT: Component [chars] timed out on response to opcode:[chars] (for:[chars])Explanation Some component did not respond to a request in stipulated time.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
ETHPORT-3
Error Message ETHPORT-3-IF_DOWN_CHANNEL_ERR_DISABLED: Interface [chars] is down (Channel error disabled)Explanation This interface belongs to a port channel and the PortChannel is error disabled.
Recommended Action Perform 'shut' and 'no shutdown' on the port channel interface that it belongs to.
Error Message ETHPORT-3-IF_SFP_ALARM: Interface [chars], [chars]Explanation There was an alarm on the transceiver module.
Recommended Action Enter the show interface transceiver details command to obtain more information.
Error Message ETHPORT-3-IF_SFP_ERROR: Interface [chars], [chars]Explanation There was an error on the transceiver module.
Recommended Action Enter the show interface transceiver details command to obtain more information.
Error Message ETHPORT-3-IF_UNSUPPORTED_TRANSCEIVER: Transceiver on interface [chars] is not supportedExplanation The transceiver for the interface specified in the error message is not a Cisco supported module.
Recommended Action Replace the module with a compatible transceiver. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ETHPORT-3-IF_UNSUPPORTED_TRANSCEIVER_VENDOR: Transceiver vendor ([hex] [hex] [hex]) for interface [chars] is not supportedExplanation The transceiver vendor for the interface specified in the error message is not supported.
Recommended Action Replace the module with a compatible transceiver. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
ETHPORT-4
Error Message ETHPORT-4-IF_SFP_WARNING: Interface [chars], [chars]Explanation There was a warning on the transceiver module.
Recommended Action Enter the show interface transceiver details command to obtain more information.
ETHPORT-5
Error Message ETHPORT-5-IF_BANDWIDTH_CHANGE: Interface [chars],bandwidth changed to [chars] KbitExplanation Bandwidth of the interface (port channel) has changed and this change is updated.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_ADMIN_DOWN: Interface [chars] is down (Administratively down)Explanation Interface has been configured to be administratively down.
Recommended Action Perform 'no shutdown'.
Error Message ETHPORT-5-IF_DOWN_CFG_CHANGE: Interface [chars] is down(Config change)Explanation FCIP interface temporarily down due to reconfiguration.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_CHANNEL_ADMIN_DOWN: Interface [chars] is down (Channel admin down)Explanation This interface belongs to a port channel and the PortChannel is configured to be administratively down.
Recommended Action Perform 'no shutdown' on the port channel interface that it belongs to.
Error Message ETHPORT-5-IF_DOWN_CHANNEL_MEMBERSHIP_UPDATE_IN_PROGRESS: Interface [chars] is down (Channel membership update in progress)Explanation The interface belongs to a port channel and a configuration is being attempted on the interface while there is a configuration in progress on the PortChannel.
Recommended Action Retry the configuration again.
Error Message ETHPORT-5-IF_DOWN_DOMAIN_ADDR_ASSIGN_FAILURE_ISOLATION: Interface [chars] is down (Isolation due to domain id assignment failure)Explanation Isolated due to a failure while assigning a domain.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_DOMAIN_INVALID_RCF_RECEIVED: Interface [chars] is down (Isolation due to invalid fabric reconfiguration)Explanation Invalid RCF received.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_DOMAIN_MANAGER_DISABLED: Interface [chars] is down (Isolation due to domain manager disabled)Explanation Isolated due to domain manager being disabled.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_DOMAIN_MAX_RETRANSMISSION_FAILURE: Interface [chars] is down (Isolation due to domain manager other side not responding)Explanation Remote end domain manager not responding.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_DOMAIN_OTHER_SIDE_EPORT_ISOLATED: Interface [chars] is down (Isolation due to domain other side eport isolated)Explanation Isolating this interface due to the remote end being isolated.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_DOMAIN_OVERLAP_ISOLATION: Interface [chars] is down (Isolation due to domain overlap)Explanation Isolated due to domain overlap.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_ELP_FAILURE_ISOLATION: Interface [chars] is down (Isolation due to ELP failure)Explanation ELP failed on the interface.
Recommended Action Check the output of 'show port internal info' in the 'ELP failure reason' field.
Error Message ETHPORT-5-IF_DOWN_EPP_FAILURE: Interface [chars] is down (Error Disabled - EPP Failure)Explanation Trunk protocol failed.
Recommended Action 'show port internal event-history msgs' will indicate the trunk protocol exchanges to determine why it failed.
Error Message ETHPORT-5-IF_DOWN_ESC_FAILURE_ISOLATION: Interface [chars] is down (Isolation due to ESC failure)Explanation ESC failed on the interface.
Recommended Action Check the output of 'show port internal event-history' to determine the ESC protocol exchanges to determine how it failed.
Error Message ETHPORT-5-IF_DOWN_ETH_IF_DOWN: Interface [chars] is down(Tunnel port src interface down)Explanation Ethernet link to which the FCIP interface is bound is down.
Recommended Action Ensure that the Ethernet cable is connected, the interface is administratively enabled.
Error Message ETHPORT-5-IF_DOWN_ETH_LINK_DOWN: Interface [chars] is down(Tunnel port src interface link down)Explanation Ethernet link to which the FCIP interface is bound is down.
Recommended Action Ensure that the Ethernet cable is connected and the remote end is also active.
Error Message ETHPORT-5-IF_DOWN_FCOT_NOT_PRESENT: Interface [chars] is down (FCOT not present)Explanation The FCOT has been removed.
Recommended Action Insert an FCOT.
Error Message ETHPORT-5-IF_DOWN_FCOT_VENDOR_NOT_SUPPORTED: Interface [chars] is down (Error disabled - Fcot vendor not supported)Explanation Fcot inserted is not a supported one.
Recommended Action Please contact customer support for a list of authorized transceiver vendors.
Error Message ETHPORT-5-IF_DOWN_HW_FAILURE: Interface [chars] is down (Hardware Failure)Explanation The module's hardware has failed.
Recommended Action Collect more information about failed module using command 'show module internal all module'.
Error Message ETHPORT-5-IF_DOWN_INACTIVE: Interface [chars] is down (Inactive)Explanation The port VSAN has been suspended or deleted.
Recommended Action Assign a new active port VSAN to the interface.
Error Message ETHPORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_MODE: Interface [chars] is down (Error disabled - Incompatible admin port mode)Explanation The configured mode is not supported on this interface.
Recommended Action Perform a 'show port internal info' to determine the list of modes supported on this interface.
Error Message ETHPORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_RXBBCREDIT: Interface [chars] is down (Error disabled - Incompatible admin port rxbbcredit)Explanation The configured receive B2B credit size is not supported.
Recommended Action Get the allowed receive B2B credit size from 'show port internal info'.
Error Message ETHPORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_RXBUFSIZE: Interface [chars] is down (Error disabled - Incompatible admin port rxbufsize)Explanation The configured receive buffer size is not supported.
Recommended Action Get the allowed receive buffer size from 'show port internal info'.
Error Message ETHPORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_SPEED: Interface [chars] is down (Error disabled - Incompatible admin port speed)Explanation The configured speed is not supported on this interface.
Recommended Action Perform a 'show port internal info' to determine the range of speed supported on this interface.
Error Message ETHPORT-5-IF_DOWN_INITIALIZING: Interface [chars] is down (Initializing)Explanation The interface is in the process of coming up.
Recommended Action If the interface is stuck in this state for a while, check the output of 'show port internal event-history' to determine what it is waiting for.
Error Message ETHPORT-5-IF_DOWN_INTERFACE_REMOVED: Interface [chars] is down (Interface removed)Explanation Interface removed.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface [chars] is down (Link failure)Explanation The physical link has gone down.
Recommended Action Ensure that the cable is connected and the remote end is not shut down.
Error Message ETHPORT-5-IF_DOWN_LOOPBACK_DIAG_FAILURE: Interface [chars] is down (Diag failure)Explanation The diagnostics failed on the interface.
Recommended Action Collect more information about failed interface using command 'attach module' to connect to the module.
Error Message ETHPORT-5-IF_DOWN_LOOPBACK_ISOLATION: Interface [chars] is down (Isolation due to port loopback to same switch)Explanation The interface is looped back to another interface on the same switch.
Recommended Action Check the connectivity of this interface and ensure that it is connected to another switch.
Error Message ETHPORT-5-IF_DOWN_MODULE_REMOVED: Interface [chars] is down (module removed)Explanation Interface is down because the module was removed.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_NON_PARTICIPATING: Interface [chars] is down (Non participating)Explanation The loop port has been put into nonparticipating mode.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_NONE: Interface [chars] is down (None)Explanation There is no apparent reason the interface is down.
Recommended Action Collect more information about the port using command 'show port internal info/event-history' to determine why it went down.
Error Message ETHPORT-5-IF_DOWN_OFFLINE: Interface [chars] is down (Offline)Explanation The interface has been placed into the offline state.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_PARENT_ADMIN_DOWN: Interface [chars] is down (Parent interface down)Explanation Parent interface is down.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_PEER_CLOSE: Interface [chars] is down(TCP conn. closed by peer)Explanation The FCIP peer connected to this interface closed the TCP connection.
Recommended Action This command will provide the peer IP address of this FCIP interface: show interface. Check to see why the peer closed the TCP connection.
Error Message ETHPORT-5-IF_DOWN_PEER_RESET: Interface [chars] is down(TCP conn. reset by peer)Explanation TCP connection to the FCIP peer got reset.
Recommended Action The following commands will provide the IP address of the peer and the route used to connect to this FCIP peer: show interface, show ip route. Check to see why the peer reset the TCP connection.
Error Message ETHPORT-5-IF_DOWN_PORT_CHANNEL_MEMBERS_DOWN: Interface [chars] is down (No operational members)Explanation This is a port channel interface and all its members are operationally down.
Recommended Action Enable at least one of the port channel's members.
Error Message ETHPORT-5-IF_DOWN_PORT_VSAN_MISMATCH_ISOLATION: Interface [chars] is down (Isolation due to port vsan mismatch)Explanation Isolated due to a mismatch in the configured port VSAN of the local and remote ends.
Recommended Action Configure the port VSAN of the local and remote interfaces to be the same and perform a 'shutdown' and a 'no shutdown'.
Error Message ETHPORT-5-IF_DOWN_RCF_IN_PROGRESS: Interface [chars] is down (RCF in progress)Explanation There is an RCF in progress.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_SOFTWARE_FAILURE: Interface [chars] is down (Port software failure)Explanation The software servicing the data path on the port has failed.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_SRC_MOD_NOT_ONLINE: Interface [chars] is down(Tunnel source module not online)Explanation Module that has the tunnel source port of this FCIP interface is not fully online.
Recommended Action The module that has the tunnel src port is coming online. Enter the show module command to find the module status.
Error Message ETHPORT-5-IF_DOWN_SRC_PORT_NOT_BOUND: Interface [chars] is down (Tunnel port src interface unbound)Explanation Tunnel port source interface unbound.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_SRC_PORT_REMOVED: Interface [chars] is down(Tunnel src port removed)Explanation Tunnel source port of this FCIP interface has been removed.
Recommended Action The src interface with ip address that matches the ip address of the bound entity is removed. This happens normally due to the module on which the src interface exists is removed.
Error Message ETHPORT-5-IF_DOWN_SUSPENDED: Interface [chars] is down (Suspended)Explanation This interface belongs to a port channel and has been suspended due to an error while bringing it up.
Recommended Action Perform a 'shutdown' and a 'no shutdown'. If this happens again obtain output of 'show port internal info/event-history' on the interface.
Error Message ETHPORT-5-IF_DOWN_SUSPENDED_BY_MODE: Interface [chars] is down (Suspended due to incompatible mode)Explanation This interface belongs to a port channel and operational mode of the interface is different from that of the PortChannel.
Recommended Action Change the mode and the trunking mode of the port channel from 'auto' and check to ensure that the remote end of the interface also belongs to the same PortChannel.
Error Message ETHPORT-5-IF_DOWN_SUSPENDED_BY_SPEED: Interface [chars] is down (Suspended due to incompatible speed)Explanation This interface belongs to a port channel and operational speed of the interface is different from that of the PortChannel.
Recommended Action Change the speed of the port channel from 'auto' and check to ensure that the remote end of the interface also belongs to the same PortChannel.
Error Message ETHPORT-5-IF_DOWN_SUSPENDED_BY_WWN: Interface [chars] is down (Suspended due to incompatible remote switch WWN)Explanation This interface belongs to a port channel and remote switch WWN of the interface is different from that of the PortChannel.
Recommended Action Ensure that this interface is connected to the same remote switch as all the other interfaces in the port channel.
Error Message ETHPORT-5-IF_DOWN_TCP_KEEP_ALIVE_EXPIRED: Interface [chars] is down(TCP conn. closed - Keep alive expired)Explanation TCP session to the FCIP peer got closed due to loss of TCP keep alive.
Recommended Action This may be due to loss of IP connectivity. The following commands will provide the IP address of the peer and the route used to connect to this FCIP peer: show interface, show ip route. Do a trace route to check the connectivity to the peer using command:traceroute ipaddr.
Error Message ETHPORT-5-IF_DOWN_TCP_MAX_RETRANSMIT: Interface [chars] is down(TCP conn. closed - retransmit failure)Explanation Interface is down due to maximum retransmission failure.
Recommended Action This may be due to loss of IP connectivity. The following commands will provide the IP address of the peer and the route used to connect to this FCIP peer: show interface, show ip route. Do a trace route to check the connectivity to the peer using command:traceroute ipaddr.
Error Message ETHPORT-5-IF_DOWN_TCP_PERSIST_TIMER_EXPIRED: Interface [chars] is down(TCP conn. closed - Persist timer expired)Explanation TCP session to the FCIP peer closed because TCP persist timer expired.
Recommended Action This may be due to loss of IP connectivity. The following commands will provide the IP address of the peer and the route used to connect to this FCIP peer: show interface, show ip route. Do a trace route to check the connectivity to the peer using command:traceroute ipaddr.
Error Message ETHPORT-5-IF_DOWN_UPGRADE_IN_PROGRESS: Interface [chars] is down (Linecard upgrade in progress)Explanation Upgrade of the line card software is in progress.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_VRF_UNUSABLE: Interface [chars] is down (Vrf down)Explanation The vrf for which this interface is a member is removed.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_VSAN_MISMATCH_ISOLATION: Interface [chars] is down (Isolation due to vsan mismatch)Explanation This is a trunking interface and the VSANs configured do not match with the VSANs configured on the remote end.
Recommended Action Check the VSANs configured on the local end with the remote end.
Error Message ETHPORT-5-IF_DOWN_ZONE_MERGE_FAILURE_ISOLATION: Interface [chars] is down (Isolation due to zone merge failure)Explanation Isolated due to a failure during zone merge.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DOWN_ZONE_REMOTE_NO_RESP_ISOLATION: Interface [chars] is down (Isolation due to remote zone server not responding)Explanation Isolated due to remote zone server not responding.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_DUPLEX: Interface [chars], operational duplex mode changed to [chars]Explanation Operational duplex mode has changed when link came up.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_ERROR_VLANS_REMOVED: VLANs [chars] on Interface [chars] are removed from suspended state.Explanation The VLANs on an interface are being removed from the suspended state.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_ERROR_VLANS_SUSPENDED: VLANs [chars] on Interface [chars] are being suspended. (Reason: [chars])Explanation The VLANs on an interface are being suspended due to some protocol action.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_HARDWARE: Interface [chars], hardware type changed to [chars]Explanation There was a change in the hardware characteristic of an interface, such as a transceiver module plugged in or removed.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_RX_FLOW_CONTROL: Interface [chars], operational Receive Flow Control state changed to [chars]Explanation Operational receive flow control has changed when link came up.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_TRUNK_DOWN: Interface [chars], vlan [chars] downExplanation Interface [chars] is trunking, VLANs [chars] are down.
Recommended Action The following commands will help determine why this VSAN is down on this interface: show interface, show port internal informationinterface VSAN, show port internal event-history interface VSAN.
Error Message ETHPORT-5-IF_TRUNK_UP: Interface [chars], vlan [chars] upExplanation Interface [chars] is trunking, VLANs [chars] are up.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_TX_FLOW_CONTROL: Interface [chars], operational Transmit Flow Control state changed to [chars]Explanation Operational transmit flow control has changed when link came up.
Recommended Action No action is required.
Error Message ETHPORT-5-IF_UP: Interface [chars] is up [chars]Explanation Interface is up in mode specified, if applicable.
Recommended Action No action is required.
Error Message ETHPORT-5-SPEED: Interface [chars], operational speed changed to [chars]Explanation Operational speed has changed when link came up.
Recommended Action No action is required.
Error Message ETHPORT-5-STORM_CONTROL_ABOVE_THRESHOLD: Traffic in port [chars] exceeds the configured threshold [chars]Explanation Traffic on specified port is beyond the configured storm-control threshold, and the excess traffic is being dropped.
Recommended Action Identify source of traffic storm.
Error Message ETHPORT-5-STORM_CONTROL_BELOW_THRESHOLD: Traffic in port [chars] has fallen below the configured threshold [chars]Explanation Traffic on specified port has returned to within configured storm-control threshold.
Recommended Action No action is required.
EUREKA_USD Messages
This section contains the EUREKA_USD messages.
EUREKA_USD-3
Error Message EUREKA_USD-3-MSG1: [chars]Explanation Eureka log message.
Recommended Action No action is required.
EVMC Messages
This section contains the EVMC messages.
EVMC-5
Error Message EVMC-5-AVL_CREATE_FAIL: [chars]([dec]): AVL Tree creation failureExplanation Event Manager could not initialize local policy store.
Recommended Action No action is required.
Error Message EVMC-5-MALLOC_FAILURE: [chars]([dec]): Memory allocation failureExplanation Event Manager Client process could not allocate enough memory.
Recommended Action No action is required.
Error Message EVMC-5-RT_PSS_OP_FAILURE: [chars]([dec]): Failed to [chars]. Error:[chars]Explanation Event Manager Client could access HA store.
Recommended Action No action is required.
EVMS Messages
This section contains the EVMS messages.
EVMS-2
Error Message EVMS-2-EVMS_PSS_DELETE_FAILURE: Delete from PSS failedExplanation Delete from PSS failed.
Recommended Action No action is required.
Error Message EVMS-2-EVMS_PSS_WRITE_FAILURE: Write to PSS failedExplanation Write to PSS failed.
Recommended Action No action is required.
Error Message EVMS-2-EVMS_SHOW_POLICY_ALLOC_FAILURE: Insufficient memory: policy information shown will be incompleteExplanation Memory allocation failed so that complete requested information is not being shown.
Recommended Action No action is required.
EVMS-4
Error Message EVMS-4-EVMS_APPLET_NO_ACTION_DEFAULT: WARNING: The default system policy actions are being skippedExplanation The default system policy actions are being skipped.
Recommended Action No action is required.
EXCEPTIONLOG-SLOT# Messages
This section contains the EXCEPTIONLOG-SLOT# messages.
EXCEPTIONLOG-SLOT#-2
Error Message EXCEPTIONLOG-SLOT#-2-LC_EXP_MSG: Linecard exception: [chars] is the affected Port bit map. [dec] Additional information - [chars]Explanation LC Exception event.
Recommended Action No action is required.
FC-TUNNEL Messages
This section contains the FC-TUNNEL messages.
FC-TUNNEL-3
Error Message FC-TUNNEL-3-INTERNAL_ERROR: Internal error: [chars]Explanation FCMPLS tunnel process encountered a generalerror thatdoes not fall in any of the categories. [chars] describes the error and its context.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-IPFC_ERROR: IPFC API, [chars], failed with error [hex]Explanation FCMPLS tunnel invoked IPFC API and received the error code. [chars] describes the API and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-MTS_ERROR: MTS message transmission failed with error [dec]Explanation FCMPLS tunnel process unsuccessfully tried to send an MTS message. MTS error number is specified in [dec].
Recommended Action No action is required.
Error Message FC-TUNNEL-3-NS_ERROR: FCNS API, [chars], failed with error [hex]Explanation FCMPLS tunnel invoked FCNS API and received the error code. [chars] describes the API and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-PM_ERROR: Port Manager API, [chars], failed with error [hex]Explanation FCMPLS tunnel invoked Port Manager API and received the error code. [chars] describes the API and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-PSS_CFG_RESTORE_ERROR: Configuration restoration for [chars] failed with error [hex]Explanation FCMPLS tunnel read the saved configuration and encountered an error while rebuilding the runtime configuration. [chars] describes the configuration which the process tried to restore and 0x[hex] is the system error code.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-PSS_ERROR: PSS operation [chars] returned error: [hex]Explanation [chars] specifies the context where the failure occurred and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-PSS_RTDB_RESTORE_ERROR: Runtime database restoration for [chars] failed with error [hex]Explanation FCMPLS tunnel read the saved runtime database and encountered an error while rebuilding the runtime database. [chars] describes the runtime database which the process tried to restore and 0x[hex] is the system error code.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-RIB_ERROR: RIB API, [chars], failed with error [hex]Explanation FCMPLS tunnel invoked RIB API and received the error code. [chars] describes the API and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-RSVP_PROTO_ERROR: RSVP protocol error: [chars]Explanation RSVP-TE protocol error is encountered. [chars] describes the error and its context.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-UNEXPECTED_MTS_MSG: Unexpected MTS message, opcode [dec], is receivedExplanation FCMPLS tunnel process received unexpected MTS event. MTS opcode is specified in [dec].
Recommended Action No action is required.
FC-TUNNEL-5
Error Message FC-TUNNEL-5-MSG_INTERFACE_DOWN: Interface [chars] is downExplanation The logical fc tunnel interface is down. This may be due to a reconfiguration on the fc tunnel, or issues on the underlying physical interface.
Recommended Action If this is not due to a known reconfiguration, you should verify connectivity at the physical port level, and then on the fc tunnel interface. Furthermore, verify the physical ports along the fc tunnel path operate in the TE mode.
Error Message FC-TUNNEL-5-MSG_INTERFACE_UP: Interface [chars] is upExplanation The fc interface is up.
Recommended Action No action is required.
FCC Messages
This section contains the FCC messages.
FCC-2
Error Message FCC-2-SHUTDOWN: Process shutting down: [chars]Explanation FCC Process is shutting down.
Recommended Action No action is required.
FCC-5
Error Message FCC-5-BAD_MSG: Received bad message: [chars]Explanation FCC has received a malformed/unrecognized message.
Recommended Action No action is required.
Error Message FCC-5-CONGESTION_STATE_CHANGE_NOTIF: Received Congestion State Change notification to state: [dec]Explanation FCC has received a Contestion State Change Notification.
Recommended Action No action is required.
Error Message FCC-5-DISABLE: FCC has been disabledExplanation FCC has been disabled.
Recommended Action No action is required.
Error Message FCC-5-ENABLE: FCC has been enabledExplanation FCC has been enabled.
Recommended Action No action is required.
Error Message FCC-5-RATE_LIMIT_END_NOTIF: Received Rate Limit End notificationExplanation FCC has received a Rate Limit End Notification.
Recommended Action No action is required.
Error Message FCC-5-RATE_LIMIT_START_NOTIF: Received Rate Limit Start notificationExplanation FCC has received a Rate Limit Start Notification.
Recommended Action No action is required.
Error Message FCC-5-STARTING: FCC process startedExplanation Process started successfully.
Recommended Action No action is required.
FCC-6
Error Message FCC-6-PRIO_UPDATE: Updated enable priority to [dec]Explanation FCC is active for packets with priority <= [threshold].
Recommended Action No action is required.
FCC_LC Messages
This section contains the FCC_LC messages.
FCC_LC-2
Error Message FCC_LC-2-ERROR_SENDING_HEART_BEAT: Error sending heart beat [dec]Explanation FCC_LC has error sending heartbeat.
Recommended Action No action is required.
Error Message FCC_LC-2-EXITING: Exiting fcc_lc: [chars]Explanation FCC_LC exiting.
Recommended Action No action is required.
Error Message FCC_LC-2-HEART_BEAT_NOT_SENT: Heart beat not sent for [dec] millisecsExplanation FCC_LC has not sent heartbeat.
Recommended Action No action is required.
Error Message FCC_LC-2-SHUTDOWN: Process shutting down: [chars]Explanation FCC_LC Process is shutting down.
Recommended Action No action is required.
Error Message FCC_LC-2-UNABLE_READ_DATA: Unable to read fcc data ([chars])Explanation FCC is unable to read and process relevant FCC data.
Recommended Action No action is required.
FCC_LC-5
Error Message FCC_LC-5-BAD_MSG: Received bad message: [chars]Explanation FCC_LC has received a malformed/unrecognized message.
Recommended Action No action is required.
Error Message FCC_LC-5-DISABLE: FCC_LC has been disabledExplanation FCC_LC has been disabled.
Recommended Action No action is required.
Error Message FCC_LC-5-ENABLE: FCC_LC has been enabledExplanation FCC_LC has been enabled.
Recommended Action No action is required.
Error Message FCC_LC-5-STARTING: FCC_LC process startedExplanation Process started successfully.
Recommended Action No action is required.
FCC_LC-6
Error Message FCC_LC-6-PRIO_UPDATE: Updated enable priority to [dec]Explanation FCC_LC is active for packets with priority <= [threshold].
Recommended Action No action is required.
FCD Messages
This section contains the FCD messages.
FCD-7
Error Message FCD-7-SB3_ABTS_EXCHANGE: sb3 aborted exchange [hex] from vsan:[dec] ch:[hex] chi:[hex] ccw:[hex] token:[hex] cmd:[hex] reason:[chars] state:[chars]:[dec]Explanation SB3 aborted exchange due to reason given. Aborts are caused by either the channel or control unit detecting a device protocol error. Recovery actions are performed to restore communication. In certain circumstances aborts occur in normal operations.
Recommended Action No action is required if communication with CUP device is still operational.
Error Message FCD-7-SB3_UCS_PER_FILE_FN: VSAN:[dec] Unit Check for perform file function, reason: [chars]Explanation SB3 failed perform file function. Failure is caused by error in the file main frame sent to director.
Recommended Action No action is required if communication with CUP device is still operational.
FCDD-SLOT# Messages
This section contains the FCDD-SLOT# messages.
FCDD-SLOT#-3
Error Message FCDD-SLOT#-3-LOG_FCDD_ERR: Nonrecoverable error - exiting: [chars]Explanation Errors which cause program to exit occurred.
Recommended Action No action is required.
FCDD-SLOT#-4
Error Message FCDD-SLOT#-4-LOG_FCDD_WARNING: Warning!: [chars]Explanation Serious errors which affect all normal operations occurred.
Recommended Action No action is required.
FCDD-SLOT#-5
Error Message FCDD-SLOT#-5-LOG_FCDD_GCONF_FSM: [chars]Explanation Illegal event received in Global Configuration FSM.
Recommended Action No action is required.
Error Message FCDD-SLOT#-5-LOG_FCDD_NOTICE: [chars]Explanation Major configuration changes.
Recommended Action No action is required.
Error Message FCDD-SLOT#-5-LOG_FCDD_RESCAN_FSM: [chars]Explanation Illegal event received in Rescan FSM.
Recommended Action No action is required.
Error Message FCDD-SLOT#-5-LOG_FCDD_TZONE_FSM: [chars]Explanation Illegal event received in Twilight Zone Remover FSM.
Recommended Action No action is required.
Error Message FCDD-SLOT#-5-LOG_FCDD_VCONF_FSM: [chars]Explanation Illegal event received in VSAN Configuration FSM.
Recommended Action No action is required.
Error Message FCDD-SLOT#-5-LOG_FCDD_VNO_FSM: [chars]Explanation Illegal event received in VSAN Normal Operation FSM.
Recommended Action No action is required.
FCDD-SLOT#-7
Error Message FCDD-SLOT#-7-LOG_FCDD_DEBUG: [chars]Explanation Unexpected errors which affect some normal operations occurred.
Recommended Action No action is required.
FCDDH-SLOT# Messages
This section contains the FCDDH-SLOT# messages.
FCDDH-SLOT#-3
Error Message FCDDH-SLOT#-3-LOG_FCDDH_ERR: Nonrecoverable error - exiting: [chars]Explanation Errors which cause program to exit occurred.
Recommended Action No action is required.
FCDDH-SLOT#-4
Error Message FCDDH-SLOT#-4-LOG_FCDDH_WARNING: Serious error: [chars]Explanation Serious errors which affect all normal operations occurred.
Recommended Action No action is required.
FCDDH-SLOT#-5
Error Message FCDDH-SLOT#-5-LOG_FCDDH_DEBUG: Unexpected error: [chars]Explanation Unexpected errors which affect some normal operations occurred.
Recommended Action No action is required.
Error Message FCDDH-SLOT#-5-LOG_FCDDH_NOTICE: [chars]Explanation Major configuration changes.
Recommended Action No action is required.
FCDOMAIN Messages
This section contains the FCDOMAIN messages.
FCDOMAIN-2
Error Message FCDOMAIN-2-DOMS_CONFLICT: Conflict detected: ([dec]) domain ID [dec] WWN [chars]Explanation Conflict detected ([dec]) domain ID [dec] with WWN [chars].
Recommended Action Check which switches have the same WWN and change either one; then change either one's domain ID.
Error Message FCDOMAIN-2-EPORT_ISOLATED: Isolation of interface [chars] (reason: [chars])Explanation Fcdomain has isolated interface [chars] (reason: [chars].) Perform a show interface. Based on the reason specified, you might have to ensure domains are adequate and unique in the VSAN and perform a disruptive restart [fcdomain restart disruptive VSAN <vsan-id>] or to reinitialize the port.
Recommended Action No action is required.
Error Message FCDOMAIN-2-FC2_INITIALIZATION_FAILED: FC initialization sequence failedExplanation The fcdomain has not been able to complete the initialization sequence with the Fibre Channel subsystem. fcdomain depends on resources not available at the moment: the switch might be short in memory or some other component might be unable to provide the necessary information to fcdomain.
Recommended Action No action is required.
Error Message FCDOMAIN-2-FC2BIND_FAILED: Bind to FC2 Service failedExplanation Fcdomain has not been able to contact the FC2 module.
Recommended Action No action is required.
Error Message FCDOMAIN-2-FCID_PERSISTENT_TBL_COMPLETELY_FULL: FCID persistent table is completely fullExplanation The FCID persistent table is full. Perform [show fcdomain fcid persistent VSAN <vsan-id>] to view the entries currently in the table. No more entries can be saved as persistent FCIDs across reboots.
Recommended Action Purge stale entries [purge fcdomain fcid] to obtain more free entries OR disable the feature on certain VSANs which are not critical enough [no fcdomain fcid persistent].
Error Message FCDOMAIN-2-HIGH_PRIORITY_MTSBIND_FAILED: Bind for high priority IPC failedExplanation Fcdomain has not been able to contact the Inter Process Communication (IPC) module for its high priority queue.
Recommended Action No action is required.
Error Message FCDOMAIN-2-INITIALIZATION_FAILED: Initialization sequence failedExplanation The fcdomain has not been able to complete the initialization sequence. fcdomain depends on resources not available at the moment: the switch might be short in memory or some other component might be unable to provide the necessary information to fcdomain.
Recommended Action No action is required.
Error Message FCDOMAIN-2-MTS_INITIALIZATION_FAILED: IPC initialization sequence failedExplanation The fcdomain has not been able to complete the initialization sequence with the IPC (Inter Process Communication) subsystem. fcdomain depends on resources not available at the moment: the switch might be short in memory or some other component might be unable to provide the necessary information to fcdomain.
Recommended Action No action is required.
Error Message FCDOMAIN-2-MTSBIND_FAILED: Bind to IPC failedExplanation Fcdomain has not been able to contact the Inter Process Communication (IPC) module.
Recommended Action No action is required.
Error Message FCDOMAIN-2-MTSREGISTRATION_FAILED: Registration of opcodes with IPC Service failedExplanation Fcdomain has not been able to register its messages with the Inter Process Communication (IPC) module.
Recommended Action No action is required.
Error Message FCDOMAIN-2-MY_NON_VIRTUAL_DOM_CONFLICTS: During VSAN merge detected that the local switch has the same domain ID [dec] and WWN [chars] of another switchExplanation The system has detected that the local switch has the same domain ID [dec] and WWN [chars] of another switch.
Recommended Action Check which switches have the same WWN and change either one; then change either one's domain ID.
Error Message FCDOMAIN-2-NON_VIRTUAL_DOMS_CONFLICTS: During VSAN merge detected conflict between two switches having the same non-virtual domain ID [dec] and the same WWN [chars]Explanation The system has detected that two switches have the same non-virtual domain ID [dec] and the same WWN [chars].
Recommended Action Check which switches have the same WWN and change either one; then change either one's domain ID.
Error Message FCDOMAIN-2-PSSBIND_FAILED: Bind to Persistent Storage Service failedExplanation Fcdomain has not been able to contact the Persistent Storage Service (PSS).
Recommended Action No action is required.
Error Message FCDOMAIN-2-RDIRJT: Rejected request for domain ID [dec], WWN requestor [chars] (reason code [dec])Explanation An invalid request for domain IDs has been rejected by fcdomain.
Recommended Action Perform [show fcdomain VSAN <vsan-id>] for all the switches in the affected VSAN; if a switch does not have a valid current domain ID, configure preferred domain ID zero, then perform [fcdomain restart vsan <vsan-id>] in the affected VSAN.
Error Message FCDOMAIN-2-SYSBIND_FAILED: Bind to System Manager service failedExplanation Fcdomain has not been able to contact the The system Manager.
Recommended Action No action is required.
Error Message FCDOMAIN-2-SYSMGR_INITIALIZATION_FAILED: System Manager initialization sequence failedExplanation The fcdomain has not been able to complete the initialization sequence with the The system Manager. fcdomain depends on resources not available at the moment: the switch might be short in memory or some other component might be unable to provide the necessary information to fcdomain.
Recommended Action No action is required.
FCDOMAIN-3
Error Message FCDOMAIN-3-COMMITERRORLOCALINVALIDALLOWEDDOMS: A remote switch attempted to locally apply an illicit allowed domains configurationExplanation A remote switch attempted to locally apply an allowed domain's configuration that does not include all currently assigned domains or the locally configured domain.
Recommended Action No action is required.
Error Message FCDOMAIN-3-COMMITERRORREMOTEINVALIDALLOWEDDOMS: A remote switch (domain ID [dec], WWN [chars]) refuses to locally apply the proposed allowed domainsExplanation The remote switch with domain ID [dec] and WWN [chars] refuses to locally apply the proposed allowed domains probably due to incompatibility with its local configured domain or the domain ID list.
Recommended Action Check the configuration on the remote switch, and make sure that the proposed allowed domains include it. Also, make sure that the proposed allowed domains include all the domains in the domain ID list.
Error Message FCDOMAIN-3-MTS_H_RECV_FAILED: IPC failure (receiving of a message failed)Explanation Fcdomain has not been able to receive a message from the Inter Process Communication (IPC) module.
Recommended Action Enter fcdomain restart in the affected VSAN (nondisruptive.).
Error Message FCDOMAIN-3-MTSOPENTRX_FAILED: IPC failure (opening of a transaction failed)Explanation Fcdomain was not able to open a transaction( HA Purposes.).
Recommended Action No action is required.
Error Message FCDOMAIN-3-MTSRECV_FAILED: IPC failure (receiving of a message failed)Explanation Fcdomain has not been able to receive a message from the Inter Process Communication (IPC) module.
Recommended Action Enter fcdomain restart in the affected VSAN (nondisruptive.).
Error Message FCDOMAIN-3-MTSRESP_FAILED: IPC failure replying to a request message (error [hex])Explanation Fcdomain has not been able to reply to a request coming from the Inter Process Communication (IPC) module (error [hex]).
Recommended Action Enter fcdomain restart in the affected VSAN (nondisruptive).
Error Message FCDOMAIN-3-MTSSEND_FAILED: IPC failure (sending of a message (syserr [hex], opc [dec], mtsq [dec], sap.node [hex], sap_addr [dec]) failed)Explanation Fcdomain has not been able to send a message to the Message Transactional Service (MTS).
Recommended Action Enter [fcdomain restart VSAN <vsan-id>] in the affected VSAN (nondisruptive).
Error Message FCDOMAIN-3-MTSSENDREQ_FAILED: IPC failure (sending of a request failed)Explanation Fcdomain was not able to send a request using the Inter Process Communication module.
Recommended Action Enter [fcdomain restart VSAN <vsan-id>] in the affected VSAN (nondisruptive.).
Error Message FCDOMAIN-3-NVRAMFAILURE: NVRAM open failedExplanation Reading the last assigned runtime domain IDs from Non Volatile RAM (NVRAM) failed.
Recommended Action Fcdomain is able to continue without access to the Non Volatile RAM (NVRAM.).
Error Message FCDOMAIN-3-PORT_SUSPENDED: Response (Cmd Code [hex]) for SWILS [hex] intended for [chars] is received on [chars]Explanation An FC2 response frame (Command Code [hex]) for SWILS [hex] that was intended for interface [chars] has been received on [chars] instead.
Recommended Action Check the configuration of both interfaces on the local switch and the interfaces on the other side of their corresponding links. In particular, check whether they should all belong to the same port channel.
Error Message FCDOMAIN-3-SDWRAPBIND_FAILED: Bind to debug server failedExplanation Fcdomain feature has not been able to contact the debug service. Any problems occurring in the fcdomain feature will not be logged.
Recommended Action No action is required.
Error Message FCDOMAIN-3-SDWRAPHISTINIT_FAILED: Initialization of history message list failed.Explanation Fcdomain feature has not been able to contact the debug history service. Any problems occurring in the fcdomain feature will not be logged to this debug history.
Recommended Action No action is required.
Error Message FCDOMAIN-3-VSAN_MERGE_DETECTED: Merge detected with VSAN [dec] (Common Fabric Name [chars])Explanation The local VSAN and VSAN [dec] have the same principal switch [chars], therefore are connected in the same logical fabric.
Recommended Action No action is required.
FCDOMAIN-4
Error Message FCDOMAIN-4-DM_ALLOWED_DM_LIST_MOD_ON_SUBORDINATE: Allowed domain list for vsan [dec] modified on subordinate switch with fcdomain distribution enabledExplanation When distRIBution is enabled, it is recommended to modify the allow domain list on the principal switch only.
Recommended Action Abort the current session on the local switch and start a new one on the principal switch.
Error Message FCDOMAIN-4-FABRICCONFSTARTRCF: Disruptive reconfiguration startedExplanation A disruptive reconfiguration (RCF phase) of the VSAN has started. This can happen when two or more fabrics merge disruptively, or when the user manually triggers a disruptive reconfiguration of the VSAN.
Recommended Action No action is required.
Error Message FCDOMAIN-4-FC2_CORRUPTED: Received malformed FC2 [chars] frameExplanation Fcdomain received a malformed FC2-SWILS frame.
Recommended Action No action is required.
Error Message FCDOMAIN-4-FCID_PERSISTENT_TBL_ALMOST_FULL: FCID persistent table is almost fullExplanation Fcdomain has 80% or more of the FCID persistent table full with entries. Perform [show fcdomain fcid persistent VSAN <vsan-id>] to view the entries currently in the table.
Recommended Action Purge stale entries [purge fcdomain fcid] to obtain more free entries.
FCDOMAIN-5
Error Message FCDOMAIN-5-DOMAIN_TYPE_IS_PREFERRED: The domain ID type is currently configured as preferred in all the existing VSANsExplanation All the currently existing VSANs have the domain ID type configured as preferrored. This means that with a low probability the domain ID of the local VSAN might change afer a reconfiguration. A reconfiguration can happen when two or more VSANs are merged or a principal link flaps. A principal link is either an upstream or a downstream link.
Recommended Action Type [fcdomain domain <dom-id> static VSAN <vsan-id>] to configure as static the domain ID type in an existing VSAN.
Error Message FCDOMAIN-5-FCID_PERSISTENT_TBL_HALF_FULL: FCID persistent table is half fullExplanation Fcdomain has 50% of the FCID persistent table full with entries. Perform [show fcdomain fcid persistent VSAN <vsan-id>] to view the entries currently in the table.
Recommended Action You may want to purge stale entries [purge fcdomain fcid] to obtain more free entries.
Error Message FCDOMAIN-5-FCIDP_DISABLED: FCID persistency feature is currently not enabled in any of the existing VSANsExplanation All the currently existing VSANs have the FCID persistency feature disabled.
Recommended Action Type [fcdomain fcid persistent VSAN <vsan-id>] to enable FCID persistency in an existing VSAN. Type [fcdomain fcid persistent global-enable] to automatically enable the FCID persistency feature on all newly created VSANs.
Error Message FCDOMAIN-5-UNKNOWNDOMAININCFSDATAREQUEST: Received CFS Data request from unknown domain [dec].Explanation A CFS Data request from the unknown domain [dec] has been received.
Recommended Action No action is required.
Error Message FCDOMAIN-5-UNKNOWNDOMAININCFSLOCKREQUEST: Received CFS Lock request from unknown domain [dec].Explanation A CFS Lock request from the unknown domain [dec] has been received.
Recommended Action No action is required.
Error Message FCDOMAIN-5-UNKNOWNDOMAININCFSRELEASEREQUEST: Received CFS Release request from unknown domain [dec].Explanation A CFS Release request from the unknown domain [dec] has been received.
Recommended Action No action is required.
Error Message FCDOMAIN-5-UNKNOWNDOMAININUNKNOWNCFSREQUEST: Received CFS request from unknown domain [dec].Explanation A CFS request from the unknown domain [dec] has been received.
Recommended Action No action is required.
FCDOMAIN-6
Error Message FCDOMAIN-6-BF_STARTED: BF started by [chars]Explanation Build Fabric has been started in this VSAN.
Recommended Action No action is required.
Error Message FCDOMAIN-6-CANNOTFREESINGLEFCID: Impossible to free single FCIDsExplanation Impossible to free single FCIDs.
Recommended Action No action is required.
Error Message FCDOMAIN-6-CLEARLOCKNOTIFICATIONRECEIVED: Implict lock release.Explanation Lock has been implicitly released due to a clear session operation.
Recommended Action No action is required.
Error Message FCDOMAIN-6-DOMAINID_INVALID: Local domain ID invalidExplanation The local domain ID is invalid.
Recommended Action No action is required.
Error Message FCDOMAIN-6-DOMAINID_VALID: Local domain ID [dec] availableExplanation The domain ID [dec] is available.
Recommended Action No action is required.
Error Message FCDOMAIN-6-DOWNSTREAM_SWITCHED: Downstream interface has been fast-switched from [chars] to [chars]Explanation Because of a link failure the downstream interface has been fast-switched from [dec] to [dec].
Recommended Action No action is required.
Error Message FCDOMAIN-6-EPORT_ALREADY_CREATED: Interface [chars] already createdExplanation Interface [chars] already created.
Recommended Action No action is required.
Error Message FCDOMAIN-6-EPORT_ALREADY_DOWN: Interface [chars] is already downExplanation Interface [chars] already down.
Recommended Action No action is required.
Error Message FCDOMAIN-6-EPORT_CLEANUP: Interface [chars] received cleanup requestExplanation Fcdomain on interface [chars] has received a cleanup request.
Recommended Action No action is required.
Error Message FCDOMAIN-6-EPORT_CREATED: Creation of interface [chars]Explanation Fcdomain is going to create interface [chars].
Recommended Action No action is required.
Error Message FCDOMAIN-6-EPORT_DOWN: Interface [chars] is downExplanation Fcdomain is going to remove interface [chars] from its database.
Recommended Action No action is required.
Error Message FCDOMAIN-6-FABRICCONFSTARTBF: Non disruptive reconfiguration startedExplanation A nondisruptive reconfiguration (BF phase) of the VSAN has started. This can happen when two or more fabrics merge, or when the user manually triggers a nondisruptive reconfiguration of the VSAN.
Recommended Action No action is required.
Error Message FCDOMAIN-6-FABRICNAME_INVALID: Fabric name not availableExplanation Fabric name not available.
Recommended Action No action is required.
Error Message FCDOMAIN-6-FABRICNAME_VALID: Fabric name [chars] availableExplanation Fabric name [chars] available.
Recommended Action No action is required.
Error Message FCDOMAIN-6-FCID_ASSIGNED: Assigned single FCID [hex]:[hex]:[hex]Explanation Assigned single FCID [hex]:[hex]:[hex].
Recommended Action No action is required.
Error Message FCDOMAIN-6-FCID_FREED: Freed single FCID [hex]:[hex]:[hex]Explanation Freed single FCID [hex]:[hex]:[hex].
Recommended Action No action is required.
Error Message FCDOMAIN-6-FCIDALREADYFREE: FCIDs already freeExplanation FCIDs already free.
Recommended Action No action is required.
Error Message FCDOMAIN-6-FCIDNOTSTORED: FCIDs not storedExplanation FCIDs not stored.
Recommended Action No action is required.
Error Message FCDOMAIN-6-FCIDP_ENABLED_DOM_TYPE_PREFERRED: FCID persistency is enabled, but the domain ID type is configured as preferredExplanation The FCID persistency feature is enabled, but the domain ID type is configured as preferrored. This means that with a low probability the domain ID of the local VSAN might change afer a reconfiguration. A reconfiguration can happen when two or more VSANs are merged or a principal link flaps. A principal link is either an upstream or a downstream link. Should the domain ID change, all the FCIDs associated with it would be invalidated.
Recommended Action Type [fcdomain domain <dom-id> static VSAN <vsan-id>] to configure as static the domain ID type in an existing VSAN.
Error Message FCDOMAIN-6-FCIDS_ASSIGNED: Assigned a sequence of 256 contiguous FCIDs starting from FCID [hex]:[hex]:[hex]Explanation Assigned a sequence of 256 contiguous FCIDs starting from FCID [hex]:[hex]:[hex].
Recommended Action No action is required.
Error Message FCDOMAIN-6-FCIDS_FREED: Freed a sequence of 256 contiguous FCIDs starting from FCID [hex]:[hex]:[hex]Explanation Freed a sequence of 256 contiguous FCIDs starting from FCID [hex]:[hex]:[hex].
Recommended Action No action is required.
Error Message FCDOMAIN-6-INCORRECTDOMAIN: Requested FCIDs with domain field different from local domainExplanation Requested FCIDs with domain field different from local domain.
Recommended Action No action is required.
Error Message FCDOMAIN-6-INCORRECTDOMAINRANGE: Requested FCIDs with domain field not in expected rangeExplanation Requested FCIDs with domain field not in expected range.
Recommended Action No action is required.
Error Message FCDOMAIN-6-INVALIDARG: Requested FCID of type 00.00.YY, but specifying an entire areaExplanation Requested FCID of type 00.00.YY, but specifying an entire area.
Recommended Action No action is required.
Error Message FCDOMAIN-6-MY_SAME_WWN_DIFFERENT_DOMS_CONFLICTS: During VSAN merge detected local WWN [chars] is already in use by another switch (the two switches have different domain IDs: [dec] (local) and [dec])Explanation The system has detected that the local switch has the same WWN [chars] of another switch, and that they have different domain IDs: [dec] (local) and [dec].
Recommended Action Check which switches have the same WWN and change either one.
Error Message FCDOMAIN-6-NODOMAIN: Local domain not availableExplanation The local domain is not available yet.
Recommended Action No action is required.
Error Message FCDOMAIN-6-NOFREEFCID: No free FCIDsExplanation No free FCIDs.
Recommended Action No action is required.
Error Message FCDOMAIN-6-NOTOWNER: Feature [dec] cannot free FCID [dec]:[dec]:[dec] (feature [dec] is the actual owner)Explanation Feature UUID [dec] cannot free FCID [dec]:[dec]:[dec] because it is not its owner (UUID actual owner is [dec]).
Recommended Action No action is required.
Error Message FCDOMAIN-6-OTHER_SIDE_VIRTUAL_IVR_DOMS_OVERLAPPING: During VSAN merge detected overlap with virtual IVR domain ID [dec] from across the linkExplanation The system has detected an overlap with the virtual IVR domain ID [dec] from across the link during an attempt to merge the local VSAN.
Recommended Action No action is required.
Error Message FCDOMAIN-6-PSWSSTARTED: Principal Switch Selection startedExplanation Fcdomain started a principal switch selection phase to elect a principal switch in this VSAN.
Recommended Action No action is required.
Error Message FCDOMAIN-6-RCF_STARTED: RCF started by [chars]Explanation Reconfigure Fabric has been started in this VSAN.
Recommended Action No action is required.
Error Message FCDOMAIN-6-REQSINGLEFCIDWITHINRESERVEDRANGE: Requested single FCIDs in area [dec] within the reserved rangeExplanation Requested single FCIDs in area [dec] within the reserved range.
Recommended Action No action is required.
Error Message FCDOMAIN-6-REQUESTEDFCIDNOTFREE: Requested FCIDs not freeExplanation Requested FCIDs not free.
Recommended Action No action is required.
Error Message FCDOMAIN-6-REQUESTEDFCIDRESERVED: Requested reserved FCIDsExplanation Requested reserved FCIDs.
Recommended Action No action is required.
Error Message FCDOMAIN-6-REQUESTEDRESERVEDFCIDMISMATCH: Requested persistent FCIDs, but there is a mismatchExplanation Requested persistent FCIDs, but there is a mismatch.
Recommended Action No action is required.
Error Message FCDOMAIN-6-SAME_WWNS_DIFFERENT_DOMS_CONFLICTS: During VSAN merge detected two switches with same WWN [chars] and different non-virtual domain IDs [dec] and [dec]Explanation The system has detected that two switches have the same WWN [chars], but different non-virtual domain IDs: [dec] and [dec].
Recommended Action Check which switches have the same WWN and change either one.
Error Message FCDOMAIN-6-TIMER_UNKNOWN: fcdomain has received a notification for an unknown timer expirationExplanation A timer unknown to fcdomain has expired.
Recommended Action No action is required.
Error Message FCDOMAIN-6-UPSTREAM_SWITCHED: Upstream interface has been fast-switched from [chars] to [chars]Explanation Because of a link failure the upstream interface has been fast-switched from [dec] to [dec].
Recommended Action No action is required.
Error Message FCDOMAIN-6-UUIDNOSPACEFOUND: No available space to store the identity of the requestor the FCIDsExplanation No available space to store the identity of the requestor the FCIDs.
Recommended Action No action is required.
Error Message FCDOMAIN-6-UUIDNOTFOUND: Universal Unique ID (UUID) not foundExplanation Universal Unique ID (UUID) not found.
Recommended Action No action is required.
Error Message FCDOMAIN-6-VIRTUAL_IVR_DOMS_OVERLAPPING: During VSAN merge detected overlap with local virtual IVR domain ID [dec]Explanation The system has detected an overlap with the local virtual IVR domain ID [dec] during an attempt to merge the local VSAN.
Recommended Action No action is required.
FCDOMAIN-7
Error Message FCDOMAIN-7-EPORT_ALREADY_ISOLATED: Interface [chars] is already isolated or downExplanation Fcdomain was going to isolate interface [chars], but the interface is already isolated.
Recommended Action No action is required.
Error Message FCDOMAIN-7-FABRICCONFCOMPLETEDBF: Non disruptive reconfiguration completedExplanation A nondisruptive reconfiguration (BF phase) completed. This can happen when two or more fabrics merged, or when the user manually triggered a nondisruptive reconfiguration of the VSAN.
Recommended Action No action is required.
Error Message FCDOMAIN-7-FABRICCONFCOMPLETEDRCF: Disruptive reconfiguration completedExplanation A disruptive reconfiguration (RCF phase) of the VSAN has completed. This can happen when two or more fabrics merged disruptively, or when the user manually triggered a disruptive reconfiguration of the VSAN.
Recommended Action No action is required.
Error Message FCDOMAIN-7-FC2_RETRY: Retransmission of FC2 frame on interface [chars] (Cmd Code: [hex])Explanation Fcdomain is retrying an FC2 frame on interface [chars] due to loss/no response. The Command Code of the frame is [hex].
Recommended Action No action is required.
Error Message FCDOMAIN-7-FCID_IN_USE_PURGING_FOR_FICON_MGR: FICON needs to purge the persistent FCID table, but at least one FCID is still in use, preventing this purge from completely remove all entries belonging to the VSAN.Explanation There may be a problem in the sequence that shuts down all interfaces before fcdomain receives a request from FICON Manager to purge the persistent FCID table.
Recommended Action No action is required.
Error Message FCDOMAIN-7-FSM_FAILED: FSM transition failed on interface [chars] (current state [chars])Explanation Fcdomain state machine generated an invalid event on interface [chars], for which no proper action was defined (current state [chars].).
Recommended Action No action is required.
Error Message FCDOMAIN-7-FSM_FORBIDDEN_TRANSITION: fcdomain state machine has hit a forbidden transitionExplanation Fcdomain state machine has tried to execute a forbidden transition.
Recommended Action No action is required.
Error Message FCDOMAIN-7-INTERFACERDY: Interface [chars] readyExplanation Interface [chars] is ready.
Recommended Action No action is required.
Error Message FCDOMAIN-7-PREACTIONTYPE_UNKNOWN: fcdomain state machine has hit an unknown pre-action typeExplanation An undefined pre-action type has been used.
Recommended Action No action is required.
Error Message FCDOMAIN-7-PSWSCOMPLETED: Principal Switch Selection completedExplanation A Principal Switch Selection (PSwS phase) completed.
Recommended Action No action is required.
Error Message FCDOMAIN-7-RDIACC: Assigned domain ID [dec], WWN of requestor [chars] (requested domain ID [dec])Explanation Domain ID [dec] has been received by VSAN with WWN [chars] (requested domain ID was [dec].).
Recommended Action No action is required.
FCFWD Messages
This section contains the FCFWD messages.
FCFWD-3
Error Message FCFWD-3-ERROR: [chars]Explanation Fcfwd encountered an error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
FCFWD-4
Error Message FCFWD-4-WARNING: [chars]Explanation Fcfwd is generating a relevant notification.
Recommended Action No action is required.
FCFWD-6
Error Message FCFWD-6-INFO: [chars]Explanation An fcfwd event occurred.
Recommended Action No action is required.
FCNS Messages
This section contains the FCNS messages.
FCNS-2
Error Message FCNS-2-DB_FULL: the database; max entries [dec] exceededExplanation Name server database is full. The max number of entries, [dec], of ports is already present in the database.
Recommended Action No action is required.
Error Message FCNS-2-INIT_FAILURE: : [chars]Explanation Fcns initialization has failed due to [chars].
Recommended Action No action is required.
Error Message FCNS-2-NO_RESPONSE: for query [chars] from domain [dec]Explanation No response for query [chars] from domain [dec].
Recommended Action No action is required.
Error Message FCNS-2-PSS_VERSION_MISMATCH: : for [chars]Explanation Version mismatch for pss of type [chars].
Recommended Action No action is required.
Error Message FCNS-2-RELOAD_FAILURE: : [chars]Explanation Failed to reload information from PSS: [chars].
Recommended Action No action is required.
FCNS-3
Error Message FCNS-3-BAD_FRAME: : [chars]Explanation Received a bad frame from the network: [chars].
Recommended Action No action is required.
Error Message FCNS-3-CFG_FAILURE: : [chars]Explanation A failure related to fcns configuration: [chars].
Recommended Action No action is required.
Error Message FCNS-3-CHUNK_FAILURE: : [chars]Explanation Chunk memory failure: [chars].
Recommended Action No action is required.
Error Message FCNS-3-DB_FAILURE: : [chars]Explanation A failure occurred in fcns database: [chars].
Recommended Action No action is required.
Error Message FCNS-3-MALLOC_FAILURE: : [chars]Explanation Malloc failed: [chars].
Recommended Action No action is required.
Error Message FCNS-3-MTS_FAILURE: : [chars] [chars]Explanation Failure occurred trying to do an MTS operation: [chars] [chars].
Recommended Action No action is required.
Error Message FCNS-3-PSS_FAILURE: : [chars]Explanation Pss failure: [chars].
Recommended Action No action is required.
FCNS-4
Error Message FCNS-4-QUERY_NO_RESPONSE: for query [chars] from domain [dec]Explanation No response for query [chars] from domain [dec].
Recommended Action No action is required.
FCNS-6
Error Message FCNS-6-DB_INFO: : [chars] [hex]Explanation Database modification:[chars] for entry [hex].
Recommended Action No action is required.
Error Message FCNS-6-STATUS_INFO: : [chars]Explanation A change in fcns status: [chars].
Recommended Action No action is required.
FCS Messages
This section contains the FCS messages.
FCS-2
Error Message FCS-2-ALLOC_FAILED: Memory allocation failed for size:[dec]Explanation Memory allocation failed for size [dec].
Recommended Action Restart the process.
Error Message FCS-2-CHUNK_ALLOC_FAILED: Chunk memory allocation failed for [chars] chunkExplanation Chunk memory allocation failed. [chars] indicates the chunk name.
Recommended Action Restart the process.
Error Message FCS-2-NO_RESPONSE: Retried maximum number of times for [chars] to domain [dec] in VSAN [dec]Explanation Maximum number of retries completed for [chars] form domain [dec] in VSAN [dec].
Recommended Action No action is required.
Error Message FCS-2-PSS_VER_FAIL: PSS file [chars] has version [dec].[dec].[dec], expected version [dec].[dec].[dec]Explanation There was a mismatch in the PSS version. [chars] indicates the PSS service, [dec].[dec].[dec] its current version number and [dec].[dec].[dec] is the expected version.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message FCS-2-RANDNUM_FAIL: [chars]Explanation There was a critical error during random number generation. [chars] indicates details of the error.
Recommended Action No action is required.
FCS-3
Error Message FCS-3-DB_ERR: [chars]Explanation An error occurred during an FCS database operation. [chars] indicates the reason for the error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message FCS-3-INIT_FAIL: [chars]Explanation An error occurred during FCS Initialization. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message FCS-3-MTS_ERR: [chars]Explanation An error occurred in processing of an MTS message. [chars] indicates the error that occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message FCS-3-NO_MTS_RESP: [chars]Explanation There was no response to an MTS request. [chars] indicates details of the MTS message.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message FCS-3-NO_REMOTE_RESP: No response for request [chars] from domain [dec] in VSAN [dec]Explanation There was no response to an FC2 request. [chars] indicates FCS request [dec] indicates the remote domain and [dec] the VSAN ID.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message FCS-3-OTHER_ERR: [chars]Explanation An FCS generic error occurred. [chars] indicates the description of the error.
Recommended Action No action is required.
Error Message FCS-3-PSS_ERR: [chars]Explanation An error occurred during an FCS PSS operation. [chars] indicates the PSS operation that caused the error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message FCS-3-SOCK_ERR: sd: [dec], [chars]Explanation An FC-2 Socket error occurred on socket-ID [dec]. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
FCS-4
Error Message FCS-4-BAD_CT_FRAME: Invalid FCS frame: [chars] received from [hex]Explanation An invalid FCS FC-CT frame with [chars] received from FC-ID [hex].
Recommended Action No action is required.
FCS-5
Error Message FCS-5-API_FAIL: [chars]: [chars]Explanation An API called by FCS failed. [chars] indicates the API name failed and [chars] the reason for failure.
Recommended Action If this message is seen during a cold boot, it means that the queried module came up after FCS and this case can be igored.
Error Message FCS-5-DB_NOTICE: [chars]Explanation An error occurred during an FCS database operation. [chars] indicates the reason for the error.
Recommended Action No action is required.
FCS-6
Error Message FCS-6-INFORMATION: [chars]Explanation An event happened that affects FCS. [chars] indicates the event.
Recommended Action No action is required.
Error Message FCS-6-REXMIT_PKT: Retransmitting request [chars] to domain [dec] in VSAN [dec]Explanation There was a retransmission of an FC2 request. [chars] indicates FCS request [dec] indicates the remote domain and [dec] the VSAN ID.
Recommended Action No action is required.
FCSP-MGR Messages
This section contains the FCSP-MGR messages.
FCSP-MGR-2
Error Message FCSP-MGR-2-DBG_INIT_FAILED: Debug Infrastructure Initialization failed ( [chars] )Explanation The system has detected an error.
Recommended Action No action is required.
Error Message FCSP-MGR-2-FC2_E_INIT_FAILED: Fibre-Channel Initialization of an E_Port failed ( [chars] )Explanation FC-SP Manager has been unable to initialize with the FC-2 E-Port infrastructure.
Recommended Action No action is required.
Error Message FCSP-MGR-2-FC2_F_INIT_FAILED: Fibre-Channel Initialization of an F_Port failed ( [chars] )Explanation FC-SP Manager has been unable to initialize with the FC-2 F-Port infrastructure.
Recommended Action No action is required.
Error Message FCSP-MGR-2-FC2_UNKNOWN_FRM_RECD_CRIT: Received an unexpected/unknown FC-2 frame on [chars]Explanation The system has detected an error.
Recommended Action No action is required.
Error Message FCSP-MGR-2-FCSP_AUTHENT_FAILURE: FC-SP Authentication failure on Port [chars] (FC-SP Failure Reason: [chars] [chars])Explanation Fibre-Channel Authentication failure on Port [chars].(Reason Code [chars] Detail [chars]). Check password configurations and ensure appropriate security modes on this port as well as peer port.
Recommended Action No action is required.
Error Message FCSP-MGR-2-FSMU_INIT_FAILED: State Machine Infrastructure Initialization failed ( [chars] )Explanation The system has detected an error.
Recommended Action No action is required.
Error Message FCSP-MGR-2-IPC_INIT_FAILED: IPC (Inter Process Communication) Initialization failed ( [chars] )Explanation FC-SP Manager has been unable to initialize with the IPC infrastructure.
Recommended Action No action is required.
Error Message FCSP-MGR-2-LICENSE_UNAVAILABLE: License:[chars] unavailable, service exitingExplanation License of [chars] is unavailable. Service will exit now.
Recommended Action Install the license file to continue using the feature.
Error Message FCSP-MGR-2-MEM_FAILED: Memory operations failed File: [chars] Line [dec] for size [hex] bytesExplanation The system has detected an error.
Recommended Action No action is required.
Error Message FCSP-MGR-2-POST_INIT_FAILED: Post-Initialization failed ( [chars] )Explanation The system has detected an error.
Recommended Action No action is required.
Error Message FCSP-MGR-2-PSS_INIT_FAILED: PSS Infrastructure Initialization failed ( [chars] )Explanation The system has detected an error.
Recommended Action No action is required.
FDMI Messages
This section contains the FDMI messages.
FDMI-2
Error Message FDMI-2-MTS_ERROR: MTS message transmission failed with error [dec]Explanation FDMI process unsuccessfully tried to send an MTS message. MTS error number is specified in [dec].
Recommended Action No action is required.
Error Message FDMI-2-PSS_CFG_RESTORE_ERROR: Configuration restoration for [chars] failed with error [hex] for key type [dec]Explanation FDMI read the saved configuration and encountered an error while rebuilding the runtime configuration. [chars] describes the configuration which the process tried to restore and 0x[hex] is the system err code.
Recommended Action No action is required.
Error Message FDMI-2-PSS_RTDB_RESTORE_ERROR: Runtime database restoration for [chars] failed with error [hex]Explanation FDMI read the saved runtime database and encountered an error while rebuilding the runtime database. [chars] describes the runtime database which the process tried to restore and 0x[hex] is the system err code.
Recommended Action No action is required.
FDMI-3
Error Message FDMI-3-BAD_FRAME: Malformed frame received: [chars]Explanation FDMI process received malformed frame. [chars] describes the malformation.
Recommended Action No action is required.
Error Message FDMI-3-BAD_RESPONSE: response with command code: [hex]Explanation FDMI process received bad payload in response.
Recommended Action No action is required.
Error Message FDMI-3-INTERNAL_ERROR: Internal err: [chars]Explanation FDMI process encountered a generalerror thatdoes not fall in any of the categories. [chars] describes the error and its context.
Recommended Action No action is required.
Error Message FDMI-3-MTS_API_ERROR: API, [chars] returned [hex]Explanation FDMI invoked API [chars], received the error code specified in 0x[hex].
Recommended Action No action is required.
Error Message FDMI-3-MTS_FORMAT_ERROR: Unknown MTS message format in opcode [dec] from module [chars]Explanation FDMI received message from module [chars] which contains unknown message format. MTS opcode is specified in [dec].
Recommended Action No action is required.
Error Message FDMI-3-NO_RESPONSE: No response from switch whose domain id is [dec]Explanation FDMI process sends an inter-switch packet to switches and has not received the response.
Recommended Action No action is required.
Error Message FDMI-3-PSS_ERROR: PSS operation [chars] returned err: [hex]Explanation [chars] specifies the context where the failure occurred and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message FDMI-3-UNEXPECTED_MTS_MSG: Unexpected MTS message, opcode [dec], is receivedExplanation FDMI process received unexpected MTS event. MTS opcode is specified in [dec].
Recommended Action No action is required.
FDMI-4
Error Message FDMI-4-SW_REJ_RESPONSE: Reject response [chars] from switch whose domain id is [dec]Explanation FDMI process sends an inter-switch packet to switches and has received the reject response with the reason code in [chars].
Recommended Action No action is required.
FDMI-6
Error Message FDMI-6-DEBUG_INFO: [chars]Explanation FDMI process debug information.
Recommended Action No action is required.
FEATURE-MGR Messages
This section contains the FEATURE-MGR messages.
FEATURE-MGR-2
Error Message FEATURE-MGR-2-MODULE_FM_DONE: feature manager completedExplanation Feature manager completed.
Recommended Action No action is required.
Error Message FEATURE-MGR-2-MODULE_FM_STARTED: feature manager startedExplanation Feature manager started.
Recommended Action No action is required.
FICON Messages
This section contains the FICON messages.
FICON-2
Error Message FICON-2-E_DUPLICATE_PN_BRINGUP_FAIL: [chars]Explanation This port has the same port number assigned to other port in the same FICON VSAN. No more than one port with duplicate port number can be up in each FICON VSAN.
Recommended Action Avoid duplicate number assignment in each FICON VSAN\n.
Error Message FICON-2-E_PN_PA_NOT_IN_BOUND: [chars]Explanation Port number or port address in startup configuration is out of bound.
Recommended Action Change FICON port number assign configuration and save to startup configuration.
Error Message FICON-2-SHUTDOWN: FICON Manager process shutting down: [chars]Explanation FICON Manager shutting down.
Recommended Action This is a error. Provide the reason given in the message\n.
FICON-3
Error Message FICON-3-E_ASSIGN_BINDING_PN_FAIL: [chars]Explanation Port number has fcip or port channel binding cannot be removed or changed.
Recommended Action Remove port number binding of the logical interface first.
Error Message FICON-3-E_ASSIGN_INVALID_PN_PARAM: [chars]Explanation Invalid port number parameters in command.
Recommended Action Check port numbers in the command.
Error Message FICON-3-E_ASSIGN_OVERLAP_PN_FAIL: [chars]Explanation Port number assigned to physical and logical cannot overlap.
Recommended Action Check port numbers in the command.
Error Message FICON-3-E_ASSIGN_PN_NOT_DOWN_FAIL: [chars]Explanation Only port number assigned to a port in down state can be removed or changed.
Recommended Action Bring down the port first.
Error Message FICON-3-E_ASSIGN_PROHIBIT_PN_FAIL: [chars]Explanation Logical port address cannot be prohibited.
Recommended Action Check port numbers in the command.
Error Message FICON-3-E_DUPLICATE_PN_ASSIGN_WARNING: [chars]Explanation This port has the same port number assigned to other port in the same FICON VSAN. No more than one port should have the same port number in each FICON VSAN.
Recommended Action Avoid duplicate number assignment in each FICON VSAN\n.
Error Message FICON-3-E_INVALID_PA_BRINGUP_FAIL: [chars]Explanation This port either has an invalid port address assigned or has no port address assigned.
Recommended Action Assign a valid FICON port number to the port.
Error Message FICON-3-E_PORT_PROHIBIT_BRINGUP_FAIL: [chars]Explanation This port has been prohibited. Prohibiting E or TE ports is not allowed. This port cannot be configured in E mode or TE mode until the prohibit mask configuration is changed.
Recommended Action Correct the prohibit mask (PDCM) for this port if you wish to bring it up as an E or TE port in a FICON VSAN\n.
Error Message FICON-3-E_UNASSIGN_NO_PN_FAIL: [chars]Explanation Only port number already assigned can be removed.
Recommended Action Check port numbers in the command.
Error Message FICON-3-PDCM_CHANGE_REJ_E_PORT: [chars]Explanation The FICON Prohibit Dynamic Connectivity Mask(PDCM) change rejected because an E or TE port is being prohibited. Prohibiting an E or TE port in not allowed.
Recommended Action Correct the prohibit mask (PDCM) for this port if you wish to bring the port up as an E or TE port in a FICON VSAN\n.
FICON-5
Error Message FICON-5-STARTING: FICON Manager process startingExplanation FICON Manager process is being started.
Recommended Action No action is required.
FICON-6
Error Message FICON-6-PDCM_CHANGE: VSAN [dec] port-address [dec] prohibit mask set to [chars]Explanation The FICON Prohibit Dynamic Connectivity Mask (PDCM) for this port has changed. VSAN [dec], port address [dec] prohibit mask (PDCM) is now set to [chars].
Recommended Action No action is required.
Error Message FICON-6-PORT_SWAP: port number [dec] [dec] swappedExplanation FICON port numbers swapped.
Recommended Action No action is required.
Error Message FICON-6-VSAN_DISABLED: FICON disabled on VSAN [dec]Explanation FICON has been disabled on the given VSAN.
Recommended Action No action is required.
Error Message FICON-6-VSAN_ENABLED: FICON enabled on VSAN [dec]Explanation FICON has been enabled on the given VSAN.
Recommended Action No action is required.
FIPSM Messages
This section contains the FIPSM messages.
FIPSM-2
Error Message FIPSM-2-FIPSM_LICENSE_UNAVAILABLE: License:[chars] unavailable, service exitingExplanation License of [chars] is unavailable. Service will exit now.
Recommended Action Install the license file to continue using the feature.
FIPSM-5
Error Message FIPSM-5-FIPSM_DISABLED: FIPSM DisabledExplanation FIPSM Service Disabled.
Recommended Action No action is required.
Error Message FIPSM-5-FIPSM_ENABLED: FIPSM EnabledExplanation FIPSM Service nabled.
Recommended Action No action is required.
Error Message FIPSM-5-FIPSM_ENODE_CREATED: Enode with mac-address [chars] on interface [chars] vlan [dec] createdExplanation FIP-snooping created a enode.
Recommended Action No action is required.
Error Message FIPSM-5-FIPSM_ENODE_DELETED: Enode with mac-address [chars] on interface [chars] vlan [dec] deletedExplanation FIP-snooping deleted a enode.
Recommended Action No action is required.
Error Message FIPSM-5-FIPSM_FCF_CREATED: FCF with mac-address [chars] on interface [chars] vlan [dec] createdExplanation FIP-snooping created a FCF.
Recommended Action No action is required.
Error Message FIPSM-5-FIPSM_FCF_DELETED: FCF with mac-address [chars] on interface [chars] vlan [dec] deletedExplanation FIP-snooping deleted a FCF.
Recommended Action No action is required.
FIPSM-6
Error Message FIPSM-6-FIPSM_SESSION_CREATED: Session between fcoe mac [chars] and fcf mac [chars] on vlan [dec] createdExplanation FIP-snooping created a session.
Recommended Action No action is required.
Error Message FIPSM-6-FIPSM_SESSION_DELETED: Session between fcoe mac [chars] and fcf mac [chars] on vlan [dec] deletedExplanation FIP-snooping deleted a session.
Recommended Action No action is required.
FLOGI Messages
This section contains the FLOGI messages.
FLOGI-1
Error Message FLOGI-1-MSG_FDISC_REJECT_TOO_MANY_LOGINS: [VSAN [dec], Interface [chars]] FDISC rejected - this interface has reached the max num of N-Ports ([dec])Explanation An FDISC was rejected because the F-Port has reached the maximum allowed number of devices.
Recommended Action Check the configuration of the NPIV device connected to the port.
Error Message FLOGI-1-MSG_FLOGI_REJECT_FCID_ERROR: [VSAN [dec], Interface [chars]] FLOGI rejected - FCID allocation failed.Explanation An FLOGI was rejected because the FCID allocation failed.
Recommended Action Check the fcid-interop configuration, purge the persistency table and check the output of show flogi database details and see if any of the A area FCID allocation entries can be configured to single fcid allocation as per Configuration Guide.
Error Message FLOGI-1-MSG_FLOGI_REJECT_TOO_MANY_LOGINS: [VSAN [dec], Interface [chars]] FLOGI rejected - this interface has reached the max num of NL-Ports ([dec])Explanation An FLOGI was rejected because the FL-Port has reached the maximum allowed number of devices.
Recommended Action Reduce the number of devices on the loop.
Error Message FLOGI-1-MSG_NPIV_NOT_SUPPORTED_WITH_TRUNKING: [VSAN [dec], Interface [chars]] NPIV not supported - on this platform, NPIV is not supported on trunking interfacesExplanation The N_Port requested NPIV, but this platform does not support NPIV on trunking F_Ports.
Recommended Action Disable NPIV, or move the N_Port to a switch that supports NPIV on trunking F_Ports.
FLOGI-2
Error Message FLOGI-2-MSG_FLOGI_REJECT_NO_ACL_TCAM_AVAILABLE: [VSAN [dec], Interface [chars]] FLOGI rejected - ACLTCAM resource exaustedExplanation An FLOGI was rejected because the ACLTCAM hardware resource is completely used.
Recommended Action Reduce the number of nodes.
FLOGI-4
Error Message FLOGI-4-MSG_VF_FLOGI_FROM_NON_CISCO_OUI: [VSAN [dec], Interface [chars]] FLOGI with VF bit set from OUI [hex]:[hex]:[hex] (nwwn: [chars])Explanation This interface received an FLOGI with VF bit set from a nonCisco OUI; in this release Virtual Fabrics are not supported on interfaces connected to third-party devices.
Recommended Action Set the trunk mode of this interface to off.
FLOGI-5
Error Message FLOGI-5-MSG_IF_REINIT_ALPA_CONFLICT: [VSAN [dec], Interface [chars]] FL/TL interface [chars] re-initialized as ALPA - PWWN map conflict occurred.Explanation The FL/TL interface is re-initialized as ALPA used by device conflicts with an existing FLOGI session after the Loop Initialization Protocol (LIP). All the devices will re-login with new ALPA and PWWN mapping.
Recommended Action No action is required.
Error Message FLOGI-5-MSG_PORT_LOGGED_IN: [VSAN [dec], Interface [chars]] Nx Port [chars] with FCID [chars] logged IN.Explanation Nx port logged in with the specified information.
Recommended Action No action is required.
Error Message FLOGI-5-MSG_PORT_LOGGED_OUT: [VSAN [dec], Interface [chars]] Nx Port [chars] logged OUT.Explanation Nx port logged out. The following commands will help determine why this Nx port logged out: 'show interface, show VSAN, show module'.
Recommended Action No action is required.
FSCM Messages
This section contains the FSCM messages.
FSCM-2
Error Message FSCM-2-FABRIC_START_CFG_MGR_PROGRAM_EXIT: Fabric Start Cfg Mgr daemon exiting: [chars]Explanation FABRIC_START_CFG_MGR daemon is exiting.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
FSPF Messages
This section contains the FSPF messages.
FSPF-2
Error Message FSPF-2-SHUTDOWN: Routing daemon shutting down : [chars]Explanation FSPF routing daemon is shutting down because of [chars] reason.
Recommended Action An error has occurred. Provide the reason provided and the log files for FSPF.
FSPF-3
Error Message FSPF-3-BAD_FC2_PKT: Received bad FC2 packet on interface [chars] : [chars]Explanation FSPF received a bad FC2 packet on [chars] interface , error description is [chars].
Recommended Action FSPF daemon has received a bad FC frame. Provide the output of 'debug fc2 pkt '.
Error Message FSPF-3-CHECKSUM_FAIL: Checksum test failed for LSR domain [dec]Explanation Periodic database checksum test failed for LSR for domain [dec].
Recommended Action This indicates that the internal database got corrupted because of some memory corruption bug. Provide output of 'show fspf database '. May need to power cycle the switch.
Error Message FSPF-3-FC2_PROC_ERR: Error in processing [chars] packet on interface [chars], Error = [chars]Explanation An error occurred in processing a [chars] FC2 packet on [chars] interface. The internal error code is [chars].
Recommended Action Turn on 'debug fspf error' to get more information. Make sure there is no misconfiguration of FSPF parameters on the two ends of the interface. Provide output of 'show fspf VSAN x' 'show fspf vsan x interface' and 'debug fspf fc pkt ' for the specific interface.
Error Message FSPF-3-FLOOD_ERR: Error in flooding the local LSR , Error = [chars]Explanation FSPF had an error in flooding the local LSR , error description is [chars].
Recommended Action Provide output of 'debug fspf flood' , 'debug fspf error'. If error is reported in transmitting packet check if interface is up and turn on 'debug fc2 error'.
Error Message FSPF-3-HELLO_MISMATCH: Mismatch in [chars] in the Hello packet on interface [chars]Explanation There is a mismatch in the [chars] entry in the hello packet received on interface [chars]. The packet will be dropped.
Recommended Action Check the configuration of hello or dead interval on the switches on the two ends of the interface to see if there is a mismatch.
Error Message FSPF-3-INTF_TIMER_ERR: Error in processing interface timer event [chars] for interface [chars] , error = [chars]Explanation FSPF had an error in processing timer event for interface chars, error is [chars].
Recommended Action Provide output of 'debug fspf error'.
Error Message FSPF-3-IPC_PROC_ERR: Error in processing IPC message : Opcode = [dec], Error code = [hex]Explanation FSPF had an error in processing message of [dec] opcode , the internal error code is [dec].
Recommended Action Possibly some wrong IPC message is received by FSPF . Provide output of 'debug fspf mts pkt' and 'debug fspf error ' trace.
Error Message FSPF-3-LOCK_FAIL: FSPF failure in gaining lockExplanation There is a software failure in gaining lock of the shared resource between FSPF threads.
Recommended Action Provide output of 'debug fspf all '.
Error Message FSPF-3-MTS_MSG_BEFORE_GSYNC: FSPF in standby received MTS message opcode = [hex] before GSYNCExplanation FSPF in standby received an MTS message of opcode [dec] before receiving the GSYNC message.
Recommended Action Provide output of 'debug fspf mts pkt '.
Error Message FSPF-3-RIB_ERR: Error in RIB : [chars]Explanation FSPF had an error in interacting with RIB, error description is [chars].
Recommended Action Check if RIB application is running using 'show processes'. Provide output of 'debug fspf route' and RIB debug traces.
Error Message FSPF-3-ROUTE_COMPUTE_ERR: Error in computing or sending routes : Error = [chars]Explanation FSPF had an error in computing routes , error description is [chars].
Recommended Action Provide the error code and output of 'debug fspf error' and 'debug fspf route' if problem is reproducible.
Error Message FSPF-3-UNLOCK_FAIL: FSPF failure in releasing lockExplanation There is a software failure in releasing lock of the shared resource between FSPF threads.
Recommended Action Provide output of 'debug fspf all '.
Error Message FSPF-3-VSAN_TIMER_ERR: Error in processing VSAN timer event [chars], error description = [chars]Explanation FSPF had an internal error in processing timer event , error description is [chars].
Recommended Action Provide output of 'debug fspf error'.
FSPF-4
Error Message FSPF-4-FC2_DOWN_INTF: Received FC2 packet on DOWN interface [chars]Explanation FSPF received a FC2 packet on inactive interface [chars] .
Recommended Action This message may be printed for the first FSPF packet when an interface is brought up. If the message is seen continuously check if FSPF is disabled on one end for the interface or the VSAN. Otherwise check 'show interface ' output to see if interface is physically up only on one side. Also check if there is any error message printed for IPC_PROC_ERR.
Error Message FSPF-4-FC2_DOWN_VSAN: Received FC2 packet on inactive vsanExplanation FSPF received a FC2 packet on inactive VSAN.
Recommended Action If message seen continuously check if FSPF is disabled on the VSAN Investigate if VSAN is active and valid domain has been assigned on the switch Also check if IPC_PROC_ERR message is printed in the syslog.
Error Message FSPF-4-ILLEGAL_FSM_EVENT: Illegal FSM event for state [chars] in interface [chars]Explanation An illegal protocol event has occurred for the FSPF state machine. The old state was [chars] for the interface [chars].
Recommended Action It is possible to get this message if some protocol packet gets dropped but the system should recover and move back to FULL state. Do 'show fspf interface' to check the state of the interface. If it is stuck in state other than FULL provide output of 'debug fspf event' and 'debug fspf fc pkt ' for the interfaces involved.
Error Message FSPF-4-LSR_DROPPED: [chars], Dropping LSR [dec] received on interface [chars]Explanation A LSR packet is dropped due to [chars] reason. LSR belonged to domain [dec] and was received on interface [chars].
Recommended Action Provide the reason given for dropping the LSR and output of 'debug fspf fc pkt' If the reason is checksum failure investigate possible packet corruption or truncation.
Error Message FSPF-4-LSR_MIN_LS_ARRIVAL: Packet arrived before MIN_LS_ARRIVAL, Dropping LSR [dec] on interface [chars]Explanation A LSR packet is dropped as it arrived before MIN_LS_ARRIVAL. LSR belonged to domain [dec] and was received on interface [chars].
Recommended Action This can occur in transient situation and protocol recovers by retransmitting the LSR. If the message is seen continuously provide output of 'debug fspf flood ' , 'debug fspf retrans' and 'debug fspf error '. The message may be seen more often when interoperating with other vendors.
Error Message FSPF-4-LSU_RX_INIT: Dropping LSU received in state INIT on interface [chars]Explanation A LSU packet is dropped as interface [char] is in INIT state when it received the LSU.
Recommended Action This can occur in some transient situations. If the problem persists provide output of 'show fspf VSAN x interface' and 'debug fspf fc pkt ' and 'debug fspf event vsan x'.
FSPF-5
Error Message FSPF-5-STARTING: Routing daemon startedExplanation FSPF routing daemon has been started.
Recommended Action No action is required.
FSPF-6
Error Message FSPF-6-ADD_LSR: New LSR added for domain [dec]Explanation A new LSR is added to the database for domain [dec] .
Recommended Action No action is required.
Error Message FSPF-6-DELETE_LSR: LSR deleted for domain [dec]Explanation The LSR for domain [dec] is deleted from the database.
Recommended Action No action is required.
Error Message FSPF-6-INTF_OPER_DOWN: Down on interface [chars]Explanation FSPF has become operationally down on interface [chars].
Recommended Action No action is required.
Error Message FSPF-6-INTF_OPER_UP: Up on interface [chars]Explanation FSPF has become operational on interface [chars].
Recommended Action No action is required.
Error Message FSPF-6-MAX_AGE: LSR [dec] reached MaxageExplanation The LSR for domain [dec] reached the maximum age and will be deleted from all the connected switches .
Recommended Action No action is required.
Error Message FSPF-6-ROLLOVER: Rolling over the incarnation number of Local LSRExplanation The incarnation number of local LSR reached the maximum value and is rolling over.
Recommended Action No action is required.
Error Message FSPF-6-SELF_ORIGINATED: Received local LSR with higher incarnation numberExplanation A LSR for the local domain was received with incarnation number higher than the one in database. This situation should only occur initially on a topology change. If this situation persists the domain assignment of switches may not be unique.
Recommended Action If this message is received continuously check if domain assignment is unique in the fabric.
Error Message FSPF-6-STATE_CREATED: Internal state created [chars]Explanation FSPF has created its internal state stateless/stateful [chars].
Recommended Action No action is required.
Error Message FSPF-6-VSAN_OPER_DOWN: Down on vsanExplanation FSPF has become operationally down on VSAN.
Recommended Action No action is required.
Error Message FSPF-6-VSAN_OPER_UP: Up with local domain [dec]Explanation FSPF has started with local domain [dec].
Recommended Action No action is required.
FSPF-7
Error Message FSPF-7-ROUTE_THREAD_STARTED: Thread number [dec] startedExplanation Route computation thread number [dec] has been started for FSPF.
Recommended Action No action is required.
GLBP Messages
This section contains the GLBP messages.
GLBP-2
Error Message GLBP-2-GLBP_URIB_INIT_ERROR: [chars]Explanation Unicast routing initialization failed and the GLBP process terminated.
Recommended Action Check syslog messages for URIB failures and fix the problem.
GLBP-3
Error Message GLBP-3-GLBP_ARP_ADD_FAILED: failed to add [chars]/[chars] in arp tableExplanation The system was unable to add the GLBP vIP into the arp table.
Recommended Action Check syslog messages for ARP failures and fix the problem.
Error Message GLBP-3-GLBP_ARP_DEL_FAILED: failed to delete [chars]/[chars] in arp tableExplanation The system was unable to delete the GLBP vIP from the arp table.
Recommended Action Check syslog messages for ARP failures and fix the problem.
Error Message GLBP-3-GLBP_FEATURE_MANAGER_ERROR: [chars]: [chars]Explanation There was a problem in GLBP interaction with feature manager.
Recommended Action Check the reason for error using feature manager and fix the problem.
Error Message GLBP-3-GLBP_IP_JOIN_GROUP_FAILED: [chars]: failed to join glbp multicast address groupExplanation The system was unable to perform a join to start receiving GLBP protocol packets.
Recommended Action Check syslog messages for IP failures and fix the problem.
Error Message GLBP-3-GLBP_IP_LEAVE_GROUP_FAILED: [chars]: failed to leave glbp multicast address groupExplanation The system was unable to perform a leave to stop receiving GLBP protocol packets.
Recommended Action Check syslog messages for IP failures and fix the problem.
Error Message GLBP-3-GLBP_MAC_ADD_FAILED: fwd [dec] failed to add [chars] in mac tableExplanation The system was unable to add the GLBP MAC address into the mac addresss table.
Recommended Action Check syslog messages for L2FM failures and fix the problem.
Error Message GLBP-3-GLBP_MAC_DEL_FAILED: fwd [dec] failed to delete [chars] in mac tableExplanation The system was unable to delete the GLBP MAC address from the mac addresss table.
Recommended Action Check syslog messages for L2FM failures and fix the problem.
Error Message GLBP-3-GLBP_ROUTE_ADD_FAILED: failed to add [chars] in routing tableExplanation The system was unable to add the GLBP vIP address into the unicast routing table.
Recommended Action Check syslog messages for URIB failures and fix the problem.
Error Message GLBP-3-GLBP_ROUTE_DEL_FAILED: failed to delete [chars] in routing tableExplanation The system was unable to delete the GLBP vIP address from the unicast routing table.
Recommended Action Check syslog messages for URIB failures and fix the problem.
GLBP-4
Error Message GLBP-4-BADAUTH: Bad authentication received from [chars]Explanation Two routers participating in a Gateway Load Balancing Protocol group have a valid authentication string that does not match.
Recommended Action Use the glbp authentication interface command to repair the Gateway Load Balancing Protocol authentication discrepancy between the local system and the one whose IP address is reported.
Error Message GLBP-4-BADVIP1: address [chars] is in the wrong subnet for this interfaceExplanation The Gateway Load Balancing Protocol virtual IP address is not within the subnet configured on this interface.
Recommended Action Configure the virtual IP address of Gateway Load Balancing Protocol to be within the subnet configured on this interface.
Error Message GLBP-4-BADVIP2: address [chars] in the wrong subnet for this interface is not learnedExplanation The Gateway Load Balancing Protocol virtual IP address contained in the hello message cannot be learned. It is not within the subnet configured on this interface.
Recommended Action Check the configuration on all Gateway Load Balancing Protocol routers.
Error Message GLBP-4-BADVIP3: address [chars] is the broadcast address for this interfaceExplanation The Gateway Load Balancing Protocol virtual IP address is a broadcast address for this interface.
Recommended Action Configure the virtual IP address of Gateway Load Balancing Protocol to be a nonbroadcast address.
Error Message GLBP-4-DIFFVIP1: active router virtual IP address [chars] is different from the locally configured virtual IP address [chars]Explanation The Gateway Load Balancing Protocol virtual IP address contained in the Hello message from the Active router is different to that configured locally.
Recommended Action Check the configuration on all Gateway Load Balancing Protocol routers.
Error Message GLBP-4-DUPADDR: Duplicate address on [chars]Explanation The IP address in a Gateway Load Balancing Protocol message received on the interface is the same as the IP address of its own router. This condition may be caused by a misconfiguration or because of a malfunctioning switch.
Recommended Action Check the configurations on all the Gateway Load Balancing Protocol routers, and ensure that any switches are functioning properly.
Error Message GLBP-4-DUPVIP1: address [chars] already assigned to interface [chars] grp [dec]Explanation The Gateway Load Balancing Protocol virtual IP address contained in the hello message cannot be learned. It is already assigned to a different Gateway Load Balancing Protocol group.
Recommended Action Check the configuration on all Gateway Load Balancing Protocol routers.
Error Message GLBP-4-DUPVIP2: address [chars] already assigned to this interfaceExplanation The Gateway Load Balancing Protocol virtual IP address contained in the hello message cannot be learned. It is already assigned to this interface.
Recommended Action Check the configuration on all Gateway Load Balancing Protocol routers.
Error Message GLBP-4-DUPVIP3: address [chars] already assigned to another interface [chars]Explanation The Gateway Load Balancing Protocol virtual IP address contained in the hello message cannot be learned. It is already assigned to, or overlaps with, an address on another interface or application.
Recommended Action Check the configuration on all Gateway Load Balancing Protocol routers.
Error Message GLBP-4-GLBP_ARP_RESP_FAILED: failed to send arp response [chars]/[chars]Explanation The system was unable to send the arp response for vIP.
Recommended Action Check syslog messages for ARP failures and fix the problem.
GLBP-5
Error Message GLBP-5-ACTIVE_CHANGE: Active gateway is [chars]Explanation The Gateway Load Balancing Protocol has changed active gateway.
Recommended Action No action is required.
Error Message GLBP-5-FWD_CREATE: fwd [dec] createdExplanation The Gateway Load Balancing Protocol forwarder has been created.
Recommended Action No action is required.
Error Message GLBP-5-FWD_DELETE: fwd [dec] deletedExplanation The Gateway Load Balancing Protocol forwarder has been removed.
Recommended Action No action is required.
Error Message GLBP-5-FWD_OWNER: fwd [dec] owner mac is [chars]Explanation The Gateway Load Balancing Protocol forwarder has changed the owner MAC address.
Recommended Action No action is required.
Error Message GLBP-5-FWD_VMAC: fwd [dec] virtual mac is [chars]Explanation The Gateway Load Balancing Protocol forwarder has changed the virtual MAC address.
Recommended Action No action is required.
Error Message GLBP-5-FWD_WEIGHTING: fwd [dec] weighting is [dec]Explanation The Gateway Load Balancing Protocol forwarder has changed the weighting.
Recommended Action No action is required.
Error Message GLBP-5-FWDSTATECHANGE: fwd [dec] state changed from [chars] to [chars]Explanation The Gateway Load Balancing Protocol forwarder has changed its state.
Recommended Action No action is required.
Error Message GLBP-5-GRPSTATECHANGE: state changed from [chars] to [chars]Explanation The Gateway Load Balancing Protocol gateway has changed its state.
Recommended Action No action is required.
Error Message GLBP-5-MEMBER_ADD: member [chars] [chars] addedExplanation The Gateway Load Balancing Protocol gateway has added a member.
Recommended Action No action is required.
Error Message GLBP-5-MEMBER_REMOVE: member [chars] [chars] removedExplanation The Gateway Load Balancing Protocol gateway has removed a member.
Recommended Action No action is required.
Error Message GLBP-5-PRIORITY: [chars] gateway priority changed to [dec]Explanation The Gateway Load Balancing Protocol gateway has changed priority.
Recommended Action No action is required.
Error Message GLBP-5-STANDBY_CHANGE: Standby gateway is [chars]Explanation The Gateway Load Balancing Protocol has changed standby gateway.
Recommended Action No action is required.
Error Message GLBP-5-TIMER: [chars] timer changed to [chars]Explanation The Gateway Load Balancing Protocol gateway has learned timers.
Recommended Action No action is required.
Error Message GLBP-5-VIPLEARN: learnt virtual ip address [chars]Explanation The Gateway Load Balancing Protocol gateway has learned virtual IP address.
Recommended Action No action is required.
Error Message GLBP-5-VIPUNLEARN: unlearnt virtual ip address [chars]Explanation The Gateway Load Balancing Protocol gateway has unlearned virtual IP address.
Recommended Action No action is required.
Error Message GLBP-5-WEIGHTING: weighting changed to [dec]Explanation The Gateway Load Balancing Protocol gateway has changed the weighting.
Recommended Action No action is required.
HSRP_ENGINE Messages
This section contains the HSRP_ENGINE messages.
HSRP_ENGINE-3
Error Message HSRP_ENGINE-3-NOSOCKET: Unable to open socketExplanation The system was unable to initialize an IP connection for the Hot Standby protocol.
Recommended Action Make sure that there is at least one interface configured to run IP.
HSRP_ENGINE-4
Error Message HSRP_ENGINE-4-BADAUTH: Bad authentication from [chars], group [dec], remote state [chars]Explanation Two routers participating in HSRP disagree on the valid authentication string.
Recommended Action Use the HSRP authentication command to repair the HSRP authentication discrepancy between the local system and the one whose IP address is reported.
Error Message HSRP_ENGINE-4-BADAUTH2: Bad authentication from [chars]Explanation Two routers participating in HSRP disagree on the valid authentication string.
Recommended Action Use the HSRP authentication command to repair the HSRP authentication discrepancy between the local system and the one whose IP address is reported.
Error Message HSRP_ENGINE-4-DIFFVIP1: [chars] Grp [dec] active routers virtual IP address [chars] is different to the locally configured address [chars]Explanation The HSRP virtual IP address contained in the Hello message from the Active router is different to that configured locally.
Recommended Action Check the configuration on all HSRP routers.
Error Message HSRP_ENGINE-4-DUPADDR: Duplicate address %i on [chars], sourced by %eExplanation The IP address in an HSRP message received on the interface is the same as the router's own IP address. This may be because of misconfiguration, or because of a malfunctioning switch.
Recommended Action Check the configurations on all the HSRP routers, and make sure that any switches you have are functioning properly.
Error Message HSRP_ENGINE-4-DUPVIP1: [chars] Grp [dec] address [chars] is already assigned to a HSRP group on this interfaceExplanation The HSRP virtual IP address contained in the Hello message cannot be learned as it is already assigned to a different HSRP group.
Recommended Action Check the configuration on all HSRP routers.
Error Message HSRP_ENGINE-4-DUPVIP2: [chars] Grp [dec] address [chars] is already assigned on this interfaceExplanation The HSRP virtual IP address contained in the Hello message cannot be learned as it is already assigned to this interface.
Recommended Action Check the configuration on all HSRP routers.
Error Message HSRP_ENGINE-4-DUPVIP3: [chars] Grp [dec] address [chars] is already assigned to, or overlaps with, an address on another interface or applicationExplanation The HSRP virtual IP address contained in the Hello message cannot be learned as it is already assigned to, or overlaps with, an address on another interface or application.
Recommended Action Check the configuration on all HSRP routers.
HSRP_ENGINE-6
Error Message HSRP_ENGINE-6-ACTIVE_CHANGE: Interface [chars] [chars] Grp [dec] Active router is [chars]Explanation The Active router for the group has changed.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-ACTIVEROUTERPRIORITY: Interface [chars] [chars] Grp [dec] Active router priority changed to [dec]Explanation The priority of the Active router for the group has changed.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-GRPSTATECHANGE: Interface [chars] [chars] Grp [dec] state changed from [chars] to [chars] reason [chars]Explanation The HSRP router has changed its state.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-MACADDRESS_CHANGE: Interface [chars] [chars] Grp [dec] mac-address changed to [chars]Explanation The MAC address of the group has changed.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-PRIORITY: Interface [chars] [chars] Grp [dec] priority changed to [dec]Explanation The current priority of the HSRP group has changed.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-STANDBY_CHANGE: Interface [chars] [chars] Grp [dec] Standby router is [chars]Explanation The Standby router for the group has changed.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-STANDBYROUTERPRIORITYCHANGE: Interface [chars] [chars] Grp [dec] Standby router priority changed to [dec]Explanation The priority of the Standby router for the group has changed.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-STATECHANGE: [chars] Grp [dec] state move to [chars]Explanation The router has changed its state.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-STATECHANGE2: [chars] Grp [dec] state moving from [chars]Explanation The router has changed its state.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-TIMER: Interface [chars] [chars] Grp [dec] [chars] timer changed to [dec] [chars]Explanation The hello/hold timer value for the HSRP group has changed.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-VIPLEARN: Interface [chars] [chars] Grp [dec] learnt virtual ip address [chars]Explanation The local router has learned virtual ip address from the incoming HSRP packet.
Recommended Action No action is required.
IKE Messages
This section contains the IKE messages.
IKE-3
Error Message IKE-3-CRYPTO_INIT_ERROR: IKEv2 crypto init error: [chars]Explanation Crypto initialization error.
Recommended Action No action is required.
Error Message IKE-3-ENABLE_ERROR: Unable to store enable flag in configuration (error-id [hex]).Explanation Service failed to store the enable flag in configuration. As a result, it will exit.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IKE-3-FIPS_MODE_ERROR: Could not set FIPS modeExplanation The FIPS mode could not be set by IKE.
Recommended Action No action is required.
Error Message IKE-3-IKE_PROGRAM_EXIT: [chars]Explanation IKE process did an abnormal exit.
Recommended Action No action is required.
Error Message IKE-3-MAX_HALF_CONN_LIMIT_REACHED: IKEv1 : Exceeded the limit for number of half open Phase 1 connectionsExplanation The number of half open connections has exceeded the maximum limit.
Recommended Action No action is required.
Error Message IKE-3-PHASE1_NEGOTIATION_FAILED: IKEv1: Phase 1 negotiation failed for peer [chars]Explanation IKE policy negotiation failed for peer [chars].
Recommended Action No action is required.
Error Message IKE-3-PHASE1_PROPOSAL_MISMATCH: IKEv1: No matching phase 1 proposal found for peer [chars]Explanation There is a IKE policy mismatch for the peer.
Recommended Action No action is required.
Error Message IKE-3-PHASE2_NEGOTIATION_FAILED: IKEv1: Phase 2 negotiation failed for peer [chars]Explanation IPsec policy negotiation failed for peer [chars].
Recommended Action No action is required.
Error Message IKE-3-PHASE2_PROPOSAL_MISMATCH: IKEv1: No matching phase 2 proposal found for peer [chars]Explanation There is a IPsec policy mismatch for the peer.
Recommended Action No action is required.
Error Message IKE-3-UNSUPPORTED_EXCHANGE: IKEv1: Unsupported exchange [dec] received from [chars]Explanation A unsupported IKE exchange type [digits] was received from [chars].
Recommended Action No action is required.
IKE-4
Error Message IKE-4-INVALID_PAYLOAD_APPEAR: IKEv2 received message (from [chars]) with payload ([chars]) appeared in [chars]([chars])Explanation Received a payload in an inappropriate exchange.
Recommended Action No action is required.
Error Message IKE-4-MESSAGE_ERROR: IKEv2 message (from [chars]) message error: [chars]Explanation Received a malformed message which does not adhere to the protocol.
Recommended Action No action is required.
Error Message IKE-4-PARSING_ERROR: IKEv2 message (from [chars]) parsing error: [chars]Explanation Received a malformed message which cannot be parsed appropriately.
Recommended Action No action is required.
Error Message IKE-4-UNKNOWN_PAYLOAD: IKEv2 received message (from [chars]) with un-recognized payload ([chars])Explanation Received an invalid payload.
Recommended Action No action is required.
Error Message IKE-4-UNSUPPORT: [chars] is not supported (message from [chars])Explanation Received something unsupported.
Recommended Action No action is required.
IKE-6
Error Message IKE-6-POLL_START_DONE: IKE is exiting since it is not enabledExplanation IKE is exiting since it is not enabled in the configuration.
Recommended Action No action is required.
ILC-SPAN Messages
This section contains the ILC-SPAN messages.
ILC-SPAN-3
Error Message ILC-SPAN-3-ERROR: [chars]Explanation Ilc_span_mgr encountered an error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
ILC_HELPER Messages
This section contains the ILC_HELPER messages.
ILC_HELPER-2
Error Message ILC_HELPER-2-NO_LICENSE_REBOOT: Linecard [dec] will reboot now.Explanation SSE License has expired, therefore the line card will be rebooted.
Recommended Action Install appropriate SSE license to be able to use SSM features normally.
ILC_HELPER-3
Error Message ILC_HELPER-3-INVALID_SSI: [chars]Explanation The ssi boot variable is configured to an invalid image. So, the line card will be brought online in basic mode instead of advanced SSI mode.
Recommended Action Configure a proper image for the ssi boot variable.
ILC_HELPER-6
Error Message ILC_HELPER-6-LICENSE_VALID: A valid license for linecard [dec] has been obtainedExplanation A valid license has been obtained for the SSM.
Recommended Action No action is required.
Error Message ILC_HELPER-6-UPGRADE_DELAY: The SSI upgrade on slot [dec] is delayed by [dec] secs.Explanation The SSI upgrade is delayed due to the configured ssm upgrade delay command.
Recommended Action No action is required.
IM Messages
This section contains the IM messages.
IM-3
Error Message IM-3-IM_LC_OFFLINE_ERROR: LC Offline could not be sent to vdc:[dec]Explanation LC Offline was not relayed to some vdc, so applications may not behave correctly.
Recommended Action No action is required.
Error Message IM-3-IM_RESP_ERROR: Component [chars] opcode:[chars] in vdc:[dec] returned error:[hex]Explanation Some component returned an error.
Recommended Action No action is required.
Error Message IM-3-IM_SEQ_ERROR: Error ([hex]) while communicating with component [chars] opcode:[chars] (for:[chars])Explanation Some component did not respond to a request in stipulated time.
Recommended Action No action is required.
IM-5
Error Message IM-5-IM_DEMUX_ERROR: [chars]Explanation Demux function has detected an error.
Recommended Action No action is required.
Error Message IM-5-IM_INTERNAL_ERROR: [chars]Explanation Internal error occurred.
Recommended Action No action is required.
Error Message IM-5-IM_INTF_STATE: [chars] [chars] in vdc [dec]Explanation Management interface state changed.
Recommended Action No action is required.
Error Message IM-5-IM_UNKNOWN_INTERFACE: [chars]Explanation Interface is not supported or not found.
Recommended Action No action is required.
IMAGE_DNLD-SLOT# Messages
This section contains the IMAGE_DNLD-SLOT# messages.
IMAGE_DNLD-SLOT#-2
Error Message IMAGE_DNLD-SLOT#-2-ADDON_IMG_DNLD_FAILED: Module image download process failed. [chars]Explanation Addon image download to the module failed. This module is not operational until an addon image has been successfully installed.
Recommended Action Verify the location and version of your module image. Use the install module cli command to download a new module image.
Error Message IMAGE_DNLD-SLOT#-2-IMG_DNLD_COMPLETE: Module image download process. [chars]Explanation Image download completed. Module image is being installed.
Recommended Action No action is required.
Error Message IMAGE_DNLD-SLOT#-2-IMG_DNLD_FAILED: Module image download process. [chars]Explanation Image download failed. Module may be inoperable.
Recommended Action Use show module cli command to verify the state of this module. Retry image download with install module cli command.
Error Message IMAGE_DNLD-SLOT#-2-IMG_DNLD_FILE_SYSTEM_CHECK_ERROR: File System check failed: [chars]Explanation File system consistency check failed.
Recommended Action File-system repair is needed using fsck.
Error Message IMAGE_DNLD-SLOT#-2-IMG_DNLD_STARTED: Module image download process. [chars]Explanation Image download started. Module image downloads are nondisruptive to the module operation.
Recommended Action No action is required.
IMAGE_DNLD-SLOT#-4
Error Message IMAGE_DNLD-SLOT#-4-IMG_DNLD_FILE_SYSTEM_RECREATION: [chars]. Partition was erased and successfully recreated.Explanation File system checking and recreation if necessary for \/images\.
Recommended Action No action is required.
IMAGE_DNLD-SLOT#-5
Error Message IMAGE_DNLD-SLOT#-5-ADDON_IMG_DNLD_COMPLETE: Addon module image download process completed. [chars]Explanation Addon image download to the module has completed.The module should now be installing this new image.
Recommended Action This message is informational only.
Error Message IMAGE_DNLD-SLOT#-5-ADDON_IMG_DNLD_STARTED: Addon module image download process started. [chars]Explanation Addon image download to the module has started. This is a disruptive download and this module will be inoperable until this download process is complete.
Recommended Action This message is informational only.
Error Message IMAGE_DNLD-SLOT#-5-ADDON_IMG_DNLD_SUCCESSFUL: Addon module image download and install process successful. [chars]Explanation Addon image download and install to the module is successful.
Recommended Action Use the show module cli command to verify the module's operational status.
IMAGE_UPGRADE-SLOT# Messages
This section contains the IMAGE_UPGRADE-SLOT# messages.
IMAGE_UPGRADE-SLOT#-2
Error Message IMAGE_UPGRADE-SLOT#-2-IMAGE_UPGRADE_ERROR: [chars]Explanation Image Upgrade Error.
Recommended Action No action is required.
IMAGE_UPGRADE-SLOT#-4
Error Message IMAGE_UPGRADE-SLOT#-4-IMAGE_UPGRADE_INFO: [chars]Explanation Image Upgrade Info.
Recommended Action No action is required.
INTERFACE_VLAN Messages
This section contains the INTERFACE_VLAN messages.
INTERFACE_VLAN-5
Error Message INTERFACE_VLAN-5-IF_DOWN_ADMIN_DOWN: Interface [chars] is down(Administratively Down)Explanation Interface has been configured to be administratively down.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-IF_DOWN_ERROR_DISABLED: Interface [chars] is down. Reason [dec]Explanation The interface encountered an error while configuring it.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-IF_DOWN_INACTIVE: Interface [chars] is down (Inactive)Explanation Interface VLAN has been suspended or deleted.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-SVI_DISABLED: SVI DisabledExplanation SVI Service Disabled.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-SVI_ENABLED: SVI EnabledExplanation SVI Service Enabled.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-SVI_GET_MAC_FAILED: Failed to acquire MAC address for SVI [hex]Explanation SVI failed to acquire MAC address.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-SVI_INIT: SVI intialization failed with error [hex]Explanation SVI initialziation error.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-SVI_MTS_SEND_FAILURE: MTS send failure for opcode [dec], error [hex]Explanation SVI encountered an error in with MTS message.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-SVI_MTS_TIME_OUT: MTS send timed outExplanation SVI did not receive response for mts message.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-SVI_RSRVD_VLAN_FAILED: Failed to get list of reserved vlans [hex]Explanation SVI failed to get the list reserved vlans.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-SVI_SDB_UPDATE_FAILED: sdb update failed with ret_val [dec]Explanation SDB updated failed for SVI.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-SVI_SEC_VLAN_FAILED: Failed to get list of secondary vlans [hex]Explanation SVI failed to get the list of secondary vlans.
Recommended Action No action is required.
Error Message INTERFACE_VLAN-5-UPDOWN: Line Protocol on Interface [chars], changed state to [chars]Explanation Line protocol status changed for an interface.
Recommended Action No action is required.
IP Messages
This section contains the IP messages.
IP-2
Error Message IP-2-ALLOC_MEMORY: Memory allocation failedExplanation The IP Configuration Manager failed to allocate a block of dynamic memory.
Recommended Action No action is required.
IP-3
Error Message IP-3-FILE_WRITE_FAILED: Writing to file [chars] failed - error: [chars]Explanation Writing to a file failed probably due to no space.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IP-3-INIT_FAILED: Initialization failed. Component [chars]Explanation The system detects that the service has failed to start. The failure occurred while initializing the component [chars].
Recommended Action Enter the show processes command to check the status of the other processes, debug the specified component.
IP-4
Error Message IP-4-DAD_FAILED_EVENT: Duplicate address detected for [chars] on [chars]Explanation Duplicate address detected for IP address.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
IP-6
Error Message IP-6-CONFIG_EVENT: IP Configuration Msg: [chars]Explanation Configuration message that needs to be logged.
Recommended Action No action is required.
Error Message IP-6-INTERFACE_DELETED: The interface [chars] has been deletedExplanation The specified interface has been deleted. The service will delete all the configuration on that interface.
Recommended Action No action is required.
Error Message IP-6-INTERFACE_EVENT: IP address [chars] [chars] on interface [chars]Explanation The IP address [chars] has been successfully [chars] on the interface [chars].
Recommended Action No action is required.
Error Message IP-6-ROUTE_NOT_ACTIVE: The [chars] is not activeExplanation The specified route is successfully configured but currently is not active.
Recommended Action Check that the route is correct and the outgoing interface is operationally up.
Error Message IP-6-STARTING: IP configuration Manager startedExplanation The IP Configuration Manager service has successfully started.
Recommended Action No action is required.
IPACL Messages
This section contains the IPACL messages.
IPACL-0
Error Message IPACL-0-EMERG: [chars]Explanation Ipacl caused a system failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
IPACL-1
Error Message IPACL-1-ALERT: [chars]Explanation Ipacl caused failures in other services.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
IPACL-2
Error Message IPACL-2-CRIT: [chars]Explanation Ipacl encountered a catastrophic error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
IPACL-3
Error Message IPACL-3-ERR: [chars]Explanation Ipacl encountered an error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
IPACL-4
Error Message IPACL-4-WARN: [chars]Explanation Ipacl igored the unexpected condition.
Recommended Action Enter 'debug ipacl all', then recreate the operation scenario, to find out more details.
IPACL-5
Error Message IPACL-5-NOTE: [chars]Explanation Ipacl does not support this operation.
Recommended Action Enter 'debug ipacl all', then recreate the operation scenario, to find out more details.
IPACL-6
Error Message IPACL-6-INFO: [chars]Explanation Ipacl event occurred.
Recommended Action No action is required.
IPFC Messages
This section contains the IPFC messages.
IPFC-2
Error Message IPFC-2-ALLOC_MEMORY: Memory allocation failedExplanation The service failed to allocate a block of dynamic memory.
Recommended Action No action is required.
IPFC-3
Error Message IPFC-3-INIT_FAILED: Initialization failed. Component [chars]Explanation The system detects that the service has failed to start. The failure occurred while initializing the component [chars].
Recommended Action Enter the show processes command to check the status of the other processes, debug the specified component.
Error Message IPFC-3-IOCTL_FAILED: IOCTL failedExplanation An IOCTL to the character device failed.
Recommended Action Show IPFC internal interface VSAN <number> for all the configured VSAN interfaces to check the internal status, show IPFC internal MIP to check the internal status.
Error Message IPFC-3-PSSERROR: [chars]Explanation IPFC manager encountered a PSS error.
Recommended Action No action is required.
IPFC-5
Error Message IPFC-5-CONFIG_EVENT: VSAN interface [dec] [chars]Explanation The specified VSAN Interface has been successfully [chars].
Recommended Action No action is required.
Error Message IPFC-5-STATE_CHANGE: VSAN interface [dec] [chars]Explanation The specified VSAN Interface is [chars].
Recommended Action No action is required.
IPFC-6
Error Message IPFC-6-STARTING: IP Over Fiber Channel service startedExplanation The service has successfully started.
Recommended Action No action is required.
IPQOSMGR Messages
This section contains the IPQOSMGR messages.
IPQOSMGR-2
Error Message IPQOSMGR-2-QOSMGR_HA_FAILURE: Failed to do high availability operation: [chars].Explanation The system has failed to do a high availability operation. [chars] is the reason.
Recommended Action No action is required.
Error Message IPQOSMGR-2-QOSMGR_INIT_FAILED: Initialization failed for QoS Manager: [chars], reason: [hex].Explanation Initialization failed for QoS Manager due to [chars], reason: [hex].
Recommended Action No action is required.
Error Message IPQOSMGR-2-QOSMGR_MTS_FAILURE: Failed to do MTS operation: [chars].Explanation The system has failed to do an MTS operation. [chars] is the reason.
Recommended Action No action is required.
Error Message IPQOSMGR-2-QOSMGR_MTS_REGISTRATION_FAILED: MTS options setting to [hex] failed for opCode: [dec].Explanation The MTS options setting to [hex] failed for opCode: [dec].
Recommended Action No action is required.
Error Message IPQOSMGR-2-QOSMGR_PSS_FAILURE: Failed to do PSS operation: [chars], reason: [hex].Explanation The system has failed to do a PSS operation [chars]. [hex] is the reason.
Recommended Action No action is required.
Error Message IPQOSMGR-2-QOSMGR_PSS_VER_FAIL: PSS file [chars] has version [dec].[dec].[dec], expected version [dec].[dec].[dec].Explanation There was a mismatch in the PSS version. [chars] indicates the PSS service, [dec].[dec].[dec] its current version number and [dec].[dec].[dec] is the expected version.
Recommended Action No action is required.
IPQOSMGR-3
Error Message IPQOSMGR-3-QOSMGR_CONFIG_ERROR: Configuration error: [chars].Explanation Configuration error. [chars] is the reason.
Recommended Action No action is required.
Error Message IPQOSMGR-3-QOSMGR_PPF_ERROR: PPF library error: [chars].Explanation PPF library errors. [chars] is the reason.
Recommended Action No action is required.
IPQOSMGR-4
Error Message IPQOSMGR-4-QOSMGR_LC_ERROR_MSG: Linecard [dec] returned an error: [chars]Explanation Linecard [dec] returned an error message which is reported as [chars].
Recommended Action No action is required.
Error Message IPQOSMGR-4-QOSMGR_PPF_WARNING: PPF library warning: [chars].Explanation PPF library warning. [chars] is the reason.
Recommended Action No action is required.
Error Message IPQOSMGR-4-QOSMGR_WARNING_MSG: [chars] [dec]Explanation QOSMGR warning messages are reported as [chars] [dec].
Recommended Action No action is required.
IPQOSMGR-6
Error Message IPQOSMGR-6-QOSMGR_STATUS: QOSMGR Status: [chars].Explanation QOSMGR status is reported as [chars].
Recommended Action No action is required.
IPS Messages
This section contains the IPS messages.
IPS-2
Error Message IPS-2-ISCSI_IPS_INIT: IPS initialization of [chars] [chars]Explanation IPS initialization failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
IPS-3
Error Message IPS-3-FCIP_FTA_ACCEL_CHAIN_ABORTED: Exch Aborted FC oxid [hex] My oxid [hex] State [chars] Event [chars] CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec] (Internal [hex]:[hex])Explanation FTA Exch being aborted.
Recommended Action No user action is required.
Error Message IPS-3-FCIP_FTA_DATA_SENSE: Sense data with ERA [hex] sent to CH FCID: [hex] CHI: [hex] from FCIP CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec]Explanation Sense data with ERA sent.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-FCIP_FTA_ERA_35: ERA [hex] presented to CH FCID: [hex] CHI: [hex] from FCIP CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec]Explanation FCIP got an ERA 35.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-FCIP_FTA_ERA_38: ERA 0x38 received CH FCID: [hex] CHI: [hex] from FCIP CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec] at tape capacity: [dec] MBExplanation FCIP got an ERA 38.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-FCIP_FTA_LOCATE_RBID_MISMATCH: Permanent Error due to Locate RBID Mismatch, CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec]Explanation FCIP-FTA got a Permanent Error.
Recommended Action No user action is required.
Error Message IPS-3-FCIP_FTA_PERM_ERR: Permanent Error, ERA [hex] rcvd CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec] sense_byte[2,6]: [[hex], [hex]]Explanation FCIP-FTA got a Permanent Error.
Recommended Action No user action is required.
Error Message IPS-3-FCIP_FTA_RETRY_ERROR: [chars] retries [dec] FC oxid [hex] My oxid [hex] State [chars] Event [chars] CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec]Explanation FTA Command timed out.
Recommended Action No user action is required.
Error Message IPS-3-IPS_CRYPTO_FIPS_FAILED: IPS module [dec] has failed FIPS tests. FIPS info - [chars]Explanation FIPS error occurred in the IPS module.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-IPS_EGRESS_PERR: Parity error on dma-bridge egress. Count: [dec]Explanation Parity error occurred in dma-bridge egress direction.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-IPS_FIPS_TEST_FAILED: IPS FIPS compliance test failedExplanation IPS FIPS compliance test failed.
Recommended Action No action is required.
Error Message IPS-3-IPS_INGRESS_PERR: Parity error on dma-bridge ingress. Count: [dec]Explanation Parity error occurred in dma-bridge ingress direction.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_CLEAR_FAILED: [chars]Explanation An error occurred while clearing the CFS lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_COMMIT_FAILED: [chars]; [chars]Explanation An error occurred while commiting the cfs config data. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_CONFIG_FAILED: [chars]; [chars]Explanation An error occurred while distRIButing the CFS config data. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_LOCK_FAILED: [chars]Explanation An error occurred while acquiring the CFS lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_MERGE_ACTIVATION_FAILED: [chars]; [chars]Explanation An error occurred while activating merged configuration. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_MERGE_CLEARED: [chars]Explanation Merge cleared, reason: [chars].
Recommended Action No action is required.
Error Message IPS-3-ISLB_CFS_MERGE_COMMIT_FAILED: [chars]; [chars]Explanation An error occurred while commiting the cfs merge config data. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_MERGE_CONFIG_FAILED: [chars]; [chars]Explanation An error occurred while distRIButing the CFS merge config data. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_MERGE_FAILED: [chars]; [chars]Explanation An error occurred while merging the iSLB CFS fabrics. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_MERGE_PRECOMMIT_FAILED: [chars]; [chars]Explanation An error occurred while precommiting merge data. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_MERGE_REQ_REJECTED: [chars]Explanation Merge requested rejected, reason: [chars].
Recommended Action No action is required.
Error Message IPS-3-ISLB_CFS_MERGING_CONFIG_DB_FAILED: [chars]; [chars]Explanation An error occurred while merging the config data. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_PRECOMMIT_FAILED: [chars]; [chars]Explanation An error occurred while precommiting data. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_PWWN_RESV_CLAIM_FAILED: [chars]Explanation PWWN reservation claim failed. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_PWWN_RESV_RELEASE_FAILED: [chars]Explanation PWWN reservation release failed. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_UNLOCK_FAILED: [chars]Explanation An error occurred while releasing the CFS lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_CFS_VRRP_DIST_FAILED: [chars]Explanation An error occurred while distRIButing the VRRP CFS runtime data. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_ZONE_ACTIVATION_FAILED: iSLB zoneset activation returned [hex] for VSAN [dec]Explanation ISLB zone set activation failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS-3-ISLB_ZONE_ACTIVATION_RETRY: iSLB zoneset activation returned [hex] for VSAN [dec]Explanation ISLB zone set activation failed. Zone server busy.
Recommended Action Retry the iSLB zonest activation.
Error Message IPS-3-ISLB_ZONE_NO_ACTIVE_ZONESET: iSLB zoneset activation returned [hex] for VSAN [dec]Explanation ISLB zone set activation failed. No active zoneset.
Recommended Action Activate a zone set in the specified VSAN and retry.
IPS-4
Error Message IPS-4-FCIP_FTA_CFG_MISMATCH: [chars]: Mismatch in FCIP Ficon Tape Acceleration configuration with peerExplanation The FCIP Ficon Tape Acceleration configuration does not match with peer's configuration.
Recommended Action Fix the FCIP Ficon Tape Acceleration configuration to be consistent with the peer.
Error Message IPS-4-FCIP_FTA_VSAN_UPDATE_WARNING: FCIP FICON tape acceleration VSAN update had an error ([chars]) on interface [chars] causing a flap of the interfaceExplanation The FCIP FICON tape acceleration VSAN configuration experienced an error when disabling and enabling the VSAN over the FCIP tunnel. The FCIP tunnel was disabled and reenabled as a result of this error to ensure data integrity.
Recommended Action No action is required.
Error Message IPS-4-FCIP_LICENSE_BIND_FAILED: Bind failed for [chars] due to [chars] for license failure; configuration accepted but bind failedExplanation The FCIP configuration was accepted, but the FCIP interface did not bind to a physical interface because the appropriate license was not available. If a license becomes available in the future, this FCIP interface will bind to a physical interface automatically.
Recommended Action Check the license state with show license usage and acquire the necessary FCIP license.
IPS-5
Error Message IPS-5-FCIP_BIND_FAILED: Bind failed for [chars] due to [chars] for [chars]Explanation FCIP/ISCSI Interface bind to Ethernet port failed.
Recommended Action No action is required.
Error Message IPS-5-FCIP_BPORT_KEEPALIVES_NOT_SUPPORTED: Bport Keepalives not supported for FCIP [chars]Explanation Bport Keepalives not supported in this release.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_BPORT_NOT_SUPPORTED: Bport not supported for FCIP [chars]Explanation Bport not supported in this releas.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_ACCEL_STARTED: Acceleration started for CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec]Explanation FCIP-FTA Acceleration started.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_ACCEL_STOPPED: Acceleration stopped for CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec] due to [chars] after [dec] MB writesExplanation FCIP-FTA Acceleration stopped.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_ALREADY_OFF: FTA Already Off, [chars] VSAN: [dec]Explanation FTA Already Off.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_ALREADY_ON: FTA Already ON, [chars] VSAN: [dec]Explanation FTA Already ON.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_CB_DOWN: FTA [chars] is DOWNExplanation FTA is DOWN.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_CB_UP: FTA [chars], is UPExplanation FTA is UP.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_DISBAND_GRP_CMD: Disband Group message processed PGID: [chars] CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec]Explanation FCIP Disbanded a Group.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_EST_GRP_CMD: Path Group establised for PGID: [chars] CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec]Explanation FCIP established a Path Group.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_NPORT_PATH_RSCN_CLNUP_PASS1: RSCN Cleanup Pass1 [chars] FCID1: [hex] FCID2: [hex] VSAN: [dec]Explanation Doing RSCN Cleanup, Pass 1.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_NPORT_PATH_RSCN_CLNUP_PASS2: RSCN Cleanup Pass2 [chars] FCID1: [hex] FCID2: [hex] VSAN: [dec]Explanation Doing RSCN Cleanup, Pass 2.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_RESIGN_GRP_CMD: Resign group processed for PGID: [chars] CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec]Explanation FCIP Resigned a Group.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_RESP_3490: 3490 device discovered by FCIP CH FCID: [hex] CHI: [hex] device at CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec]Explanation Device type discovered is 3490.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_RESP_3590: 3590 device discovered by FCIP CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec]Explanation Device type discovered is 3590.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_RESP_NOT_TAPE: Non-tape device discovered by FCIP CH FCID: [hex] CHI: [hex] device at CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec]Explanation FCIP discovered a non-tape device.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_TURN_OFF_LAST_VSAN: FTA turned off for the Last VSAN, [chars] VSAN: [dec]Explanation FTA turned off for the Last VSAN.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_TURN_OFF_NONLAST_VSAN: FTA turned off for the Non-Last VSAN, [chars] VSAN: [dec]Explanation FTA turned off for the Non-Last VSAN.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_TURN_ON: Turn ON FTA, [chars] VSAN: [dec]Explanation FTA turned ON.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_FTA_WARNING: FTA Warning :[chars]Explanation Generic FTA Warning.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_IF_CR_DEL: Interface [chars] [chars]Explanation FCIP Interface was Created or Deleted.
Recommended Action No action is required.
Error Message IPS-5-FCIP_MODE1_CHANGED_TO_MODE2: Changing mode1 compression to mode2 for [chars], on a 18+4 switchExplanation Change mode1 compression to mode2 on 18+4.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_NUM_TCP_CONNS_MISMATCH: [chars]: configured for 2 tcp connections but currently operating with 1 connectionExplanation Number of configured tcp connections do not match number of connections currently up.
Recommended Action No action is required.
Error Message IPS-5-FCIP_PEER_CAVIUM: Peer FCIP [chars] is a 18+4 switchExplanation Peer switch is 18+4.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_PEER_NON_CAVIUM: Peer FCIP [chars] is a non 18+4 switchExplanation Peer switch is non18+4.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_RA_CFG_MISMATCH: [chars]: Mismatch in FCIP Tape Read Acceleration capability with peerExplanation The FCIP Tape Read Acceleration capability does not match with peer's configuration.
Recommended Action Fix the FCIP Tape Read Acceleration capability to be consistent with the peer.
Error Message IPS-5-FCIP_SF_NOT_SUPPORTED: Special-Frame not supported for FCIP [chars]Explanation Spl-Frame not supported in this release.
Recommended Action No user action is required.
Error Message IPS-5-FCIP_TA_CFG_MISMATCH: [chars]: Mismatch in FCIP Tape Acceleration configuration with peerExplanation The FCIP Tape Acceleration configuration does not match with peer's configuration.
Recommended Action Fix the FCIP Tape Acceleration configuration to be consistent with the peer.
Error Message IPS-5-FCIP_TA_ITL_MISMATCH: [chars]: Mismatch in FCIP Write/Tape Acceleration software capability with peerExplanation The FCIP Write/Tape Acceleration software capability does not match with peer's software capability.
Recommended Action Fix the FCIP software to be consistent with the peer.
Error Message IPS-5-FCIP_TSTAMP_CHK_FAILED: [chars]: Timestamp check failed on ingressing framesExplanation Timestamp between local and remote side exceeds the configured tolerance.
Recommended Action No action is required.
Error Message IPS-5-FCIP_UNBIND_FAILED: UNBIND failed for [chars] due to [chars] for [chars]Explanation FCIP/ISCSI Interface UNBIND from Ethernet port failed.
Recommended Action No action is required.
Error Message IPS-5-FCIP_WA_CFG_MISMATCH: [chars]: Mismatch in FCIP Write Acceleration configuration with peerExplanation The FCIP Write Acceleration configuration does not match with peer's configuration.
Recommended Action Fix the FCIP Write Acceleration configuration to be consistent with the peer.
Error Message IPS-5-FCIP_WA_XFER_RDY_ERR: [chars]: FCIP Write Acceleration received XFER-RDY after exhcange cleanup. Host [hex] Target [hex]Explanation FCIP Write/Tape Acceleration received XFER-RDY after exchange cleanup.
Recommended Action No action is required.
Error Message IPS-5-FCIP_XRCE_CFG_MISMATCH: [chars]: Mismatch in FCIP XRC Emulator configuration with peerExplanation The FCIP XRC Emulator configuration does not match with peer's configuration.
Recommended Action Fix the FCIP XRC Emulator configuration to be consistent with the peer.
Error Message IPS-5-IPS_IPACL_LOG_MSG: [chars]Explanation Details of the packet dropped due to ACLs.
Recommended Action No action is required.
Error Message IPS-5-IPS_TCP_PORT_IN_USE: Cannot bringup interface [chars], local port already in useExplanation FCIP and iSCSI interface are trying to use the same local port, please use different ports.
Recommended Action No action is required.
Error Message IPS-5-ISCSI_BAD_DATA_DIGEST_CRC: iSCSI ingress data digest error from initiator [chars] alias [chars] S_ID [hex] to D_ID [hex]Explanation ISCSI Ingress Data Digest CRC failed.
Recommended Action No action is required.
Error Message IPS-5-ISCSI_CONN_DOWN: [chars]: iSCSI session down from initiator [chars] alias [chars] ip [chars] to target [chars], reason: [chars]Explanation ISCSI session goes down.
Recommended Action No action is required.
Error Message IPS-5-ISCSI_CONN_DOWN_BATCH: [chars]: [dec] iSCSI sessions failed in last [chars], reason: [chars]Explanation Number of iSCSI session down during the last time interval.
Recommended Action No action is required.
Error Message IPS-5-ISCSI_CONN_UP: [chars]: iSCSI session up from initiator [chars] alias [chars] ip [chars] to target [chars]Explanation ISCSI session comes up and reaches Full-Feature phase.
Recommended Action No action is required.
Error Message IPS-5-ISCSI_PORT_FAILOVER: [chars]: iSCSI initiator [chars] alias [chars] ip [chars] target [chars]. FC session failed over to port [chars]Explanation FC session for the iSCSI session failed over to newly active port.
Recommended Action No action is required.
Error Message IPS-5-ISCSI_SB_GET_TGT: iSCSI SB get [dec] targets, initiator [chars] alias [chars] ip [chars]Explanation ISCSI FCNS query response.
Recommended Action No action is required.
Error Message IPS-5-ISCSI_SESSION_CREATE_FAILURE: [chars]: iSCSI Session initiator [chars] target [chars] create failed. [chars]Explanation ISCSI Session Create failed.
Recommended Action No action is required.
Error Message IPS-5-ISCSI_SESSION_CREATE_REDIRECT: [chars]: iSCSI Session initiator [chars] target [chars] redirected to [chars]/[chars]Explanation ISCSI Session Create redirected.
Recommended Action No action is required.
Error Message IPS-5-ISCSI_SESSION_REDIRECT_TIMEOUT: iSCSI Session initiator [chars] to [chars] redirected to [chars] timeoutExplanation ISCSI Session Redirect timeout.
Recommended Action No action is required.
Error Message IPS-5-ISLB_CFS_SESSION_CLEARED: CFS Session ClearedExplanation CFS Session Cleared by user.
Recommended Action No action is required.
Error Message IPS-5-PORT_IPCFG_FAILED: Cannot configure IP address for interface [chars]Explanation Cannot configure IPS port IP address.
Recommended Action No action is required.
Error Message IPS-5-SB_MGR_CORE_FAILED: Ethernet Processing core [chars] failed due to [chars]Explanation Ethernet Processing Core failed.
Recommended Action No action is required.
Error Message IPS-5-SFRAME_ENTITY_ID_MISMATCH: [chars]: special frame profile ID mismatchExplanation Special frame received and destination profile ID does not match local profile ID.
Recommended Action No action is required.
Error Message IPS-5-SFRAME_FABRIC_WWN_MISMATCH: [chars]: special frame fabric wwn mismatchExplanation Special frame received and source/destination fabric wwn does not match local destination/ source fabric wwn.
Recommended Action No action is required.
Error Message IPS-5-SFRAME_IF_ADMIN_DOWN: [chars]: special frame received if downExplanation Special frame received and interface is admin down.
Recommended Action No action is required.
Error Message IPS-5-SFRAME_IF_NOT_ENABLED: [chars]: special frame not enabledExplanation Special frame received and interface special frame configuration is disabled.
Recommended Action No action is required.
Error Message IPS-5-SFRAME_INVALID_NONCE: [chars]: special frame response has invalid nonce for FCIPExplanation Special frame response has a different nonce than was originally sent in the special frame.
Recommended Action No action is required.
Error Message IPS-5-SFRAME_NOT_RECV: [chars]: special frame was not received by passive-side FCIPExplanation Special frame was not received by the passive-side of the FCIP TCP tunnel within given time period.
Recommended Action No action is required.
Error Message IPS-5-SFRAME_RESP_MISMATCH: [chars]: special frame response has byte mismatch for FCIPExplanation Special frame response has a mismatch in one of the bytes from what was sent from the FCIP special frame sender.
Recommended Action No action is required.
Error Message IPS-5-SFRAME_RESP_NOT_RECV: [chars]: special frame response was not received by active-side FCIPExplanation Special frame response was not received by the active-side of the FCIP TCP tunnel within given time period.
Recommended Action No action is required.
IPS-7
Error Message IPS-7-ISCSI_FCNS_QUERY_REQ: return [hex], wait [dec], VSAN [dec], Init: [chars]Explanation ISCSI FCNS query.
Recommended Action No action is required.
Error Message IPS-7-ISCSI_FCNS_QUERY_RESP: result [hex], [dec] targets, wait [dec], Init: [chars]Explanation ISCSI FCNS query response.
Recommended Action No action is required.
Error Message IPS-7-ISCSI_NEW_FCNS_QUERY_REQ: return [hex], VSANs [chars], Init: [chars]Explanation ISCSI FCNS query.
Recommended Action No action is required.
Error Message IPS-7-ISCSI_NEW_FCNS_QUERY_RESP: result [hex], [dec] entries, [dec] targets, [dec] total targets Init: [chars]Explanation ISCSI FCNS query response.
Recommended Action No action is required.
Error Message IPS-7-ISNS_SVR_ERR_RESPONSE: iSNS server returned following error code on iSNS request for interface [chars] : [dec]Explanation ISNS server returned an error for register/deregister request. For select error codes iSNS client would retry and re-register all target nodes corresponding to the interface.
Recommended Action No action is required.
IPS_SB_MGR-SLOT# Messages
This section contains the IPS_SB_MGR-SLOT# messages.
IPS_SB_MGR-SLOT#-2
Error Message IPS_SB_MGR-SLOT#-2-NODE_CORE_NOT_RESPONDING: [Node [dec], Core [dec]]: Not responding to heartbeats, state=[hex]Explanation Node is not incrementing heartbeats periodically.
Recommended Action Potential node software issue. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS_SB_MGR-SLOT#-2-NODE_NOT_RESPONDING: [Node [dec], Core [dec]] : Not responding to heartbeatsExplanation Node manager is not receiving heartbeat responses from the node.
Recommended Action Potential node software issue. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS_SB_MGR-SLOT#-2-NODE_REIMAGE_PREPARE_FAIL: [Node [dec]]: Disk formatting failed during node installExplanation There was a problem during the partitioning of disk and creation of file systems during node install.
Recommended Action Potential node software issue. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS_SB_MGR-SLOT#-2-PORT_SOFTWARE_FAILURE: Port software failure, module [dec] port [dec]Explanation The software servicing the data path on the port has failed.
Recommended Action No action is required.
IPS_SB_MGR-SLOT#-3
Error Message IPS_SB_MGR-SLOT#-3-COMP_FAILURE: Heartbeat failure in compression engine (error [hex])Explanation The compression engine did not respond to heartbeats, due to some failure. SAN-OS will restart the compression engine to clear the problem.
Recommended Action No action is required.
Error Message IPS_SB_MGR-SLOT#-3-CRYPTO_FAILURE: Heartbeat failure in encryption engine (error [hex])Explanation The encryption engine did not respond to heartbeats, due to some failure. SAN-OS will restart the encryption engine to clear the problem.
Recommended Action No action is required.
IPS_SB_MGR-SLOT#-4
Error Message IPS_SB_MGR-SLOT#-4-NODE_NOT_COMPAT_WITH_ADD_ON: svc-node[dec] image is not compatible with svclc imageExplanation The svc image on the node is not compatible with the add on image running on the line card.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS_SB_MGR-SLOT#-4-NODE_NOT_COMPAT_WITH_CURRENT: svc-node[dec] image is not compatible with current node imageExplanation The new svc image is not compatible with the svc image currently running on the node.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS_SB_MGR-SLOT#-4-NODE_NOT_COMPAT_WITH_SUP: svc-node[dec] image is not compatible with system imageExplanation The svc image on the node is not compatible with the supervisor image.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
IPS_SB_MGR-SLOT#-6
Error Message IPS_SB_MGR-SLOT#-6-SBMGR_EVENT: Sbmgr event: [chars]Explanation This is an event log of sb_mgr relating to a port/node.
Recommended Action No action is required.
IPSEC Messages
This section contains the IPSEC messages.
IPSEC-2
Error Message IPSEC-2-IPSEC_INIT: IPSec initialization of [chars] [chars]Explanation IPSec initialization failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPSEC-2-IPSEC_SPD_OVERFLOW_DUE_TO_ACL: SPD Overflow on interface due to IP ACL [chars] bound to crypto map [chars] [dec]Explanation Modifying IP ACL caused Security Policy Database on the interface to overflow, IP ACL filter not applied to security policy database.
Recommended Action Undo IP ACL change.
IPSEC-3
Error Message IPSEC-3-14_2_MODULE_PACKETS_DROPPED: [chars]: packets were dropped in the moduleExplanation Packets dropped in the 14/2 module. Please collect drop statistics using \show ipsec internal crypto-acc interface gigabit <slot/port> stats\.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPSEC-3-IPSEC_FIPS_TEST_FAILED: IPSEC FIPS compliance test failedExplanation IPSEC FIPS compliance test failed.
Recommended Action No action is required.
Error Message IPSEC-3-IPSEC_MSG_SEND_FAILURE: failed to send [chars] to sap [dec]: [chars]Explanation Failed to send a message.
Recommended Action No action is required.
IPSEC-5
Error Message IPSEC-5-IPSEC_CMS_IF_ACL_UPDATED: IP ACL [chars] updated while Crypto map [chars] [dec] bound to interface(s)Explanation IP ACL updated while it is mapped to a crypto map that is bound to interface(s).
Recommended Action No action is required.
Error Message IPSEC-5-IPSEC_DISABLED: IPSec DisabledExplanation IPSec Disabled.
Recommended Action No action is required.
Error Message IPSEC-5-IPSEC_DISABLED_LIC_EXPIRED: IPSec Disabled due to License ExpiryExplanation IPSec Disabled due to License Expiry.
Recommended Action No action is required.
Error Message IPSEC-5-IPSEC_ENABLED: IPSec EnabledExplanation IPSec Enabled.
Recommended Action No action is required.
Error Message IPSEC-5-IPSEC_SA_CREATED: [chars]: IPSec SA created: local_ip: [chars], peer_ip: [chars], [chars] SPI: [dec] ([hex])Explanation IPSec SA created.
Recommended Action No action is required.
Error Message IPSEC-5-IPSEC_SA_DELETED: [chars]: IPSec SA deleted: local_ip: [chars], peer_ip: [chars], [chars] SPI: [dec] ([hex]), reason: [chars]Explanation IPSec SA deleted.
Recommended Action No action is required.
Error Message IPSEC-5-IPSEC_SA_REKEYED: [chars]: IPSec SA rekeyed: local_ip: [chars], peer_ip: [chars], [chars] SPI: [dec] ([hex])Explanation IPSec SA rekeyed.
Recommended Action No action is required.
Error Message IPSEC-5-IPSEC_TUNNEL_CREATED: [chars]: IPSec tunnel created: local_ip: [chars], peer_ip: [chars], id: [dec], protocol: [chars], traffic:: local: [chars]/[chars], port: [chars], remote: [chars]/[chars], ports: [chars]Explanation IPSec tunnel created.
Recommended Action No action is required.
Error Message IPSEC-5-IPSEC_TUNNEL_DELETED: [chars]: IPSec tunnel deleted: local_ip: [chars], peer_ip: [chars], id: [dec], protocol: [chars], traffic:: local: [chars]/[chars], ports: [chars] remote: [chars]/[chars], ports: [chars]Explanation IPSec tunnel deleted.
Recommended Action No action is required.
Error Message IPSEC-5-IPSEC_TUNNEL_REKEYED: [chars]: IPSec tunnel rekeyed: local_ip: [chars], peer_ip: [chars], id: [dec], protocol: [chars] traffic:: local: [chars]/[chars], ports: [chars] remote: [chars]/[chars], ports: [chars]Explanation IPSec tunnel rekeyed.
Recommended Action No action is required.
IPV6 Messages
This section contains the IPV6 messages.
IPV6-2
Error Message IPV6-2-ALLOC_MEMORY: Memory allocation failedExplanation The IP Configuration Manager failed to allocate a block of dynamic memory.
Recommended Action No action is required.
IPV6-3
Error Message IPV6-3-FILE_WRITE_FAILED: Writing to file [chars] failed - error: [chars]Explanation Writing to a file failed probably due to no space.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPV6-3-INIT_FAILED: Initialization failed. Component [chars]Explanation The system detects that the service has failed to start. The failure occurred while initializing the component [chars].
Recommended Action Enter the show processes command to check the status of the other processes, debug the specified component.
IPV6-4
Error Message IPV6-4-DAD_FAILED_EVENT: Duplicate address detection failed for [chars] on [chars]Explanation Duplicate address detection for IP address failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
IPV6-6
Error Message IPV6-6-CONFIG_EVENT: IP Configuration Msg: [chars]Explanation Configuration message that needs to be logged.
Recommended Action No action is required.
Error Message IPV6-6-INTERFACE_DELETED: The interface [chars] has been deletedExplanation The specified interface has been deleted. The service will delete all the configuration on that interface.
Recommended Action No action is required.
Error Message IPV6-6-INTERFACE_EVENT: IP address [chars] [chars] on interface [chars]Explanation The IP address [chars] has been successfully [chars] on the interface [chars].
Recommended Action No action is required.
Error Message IPV6-6-ROUTE_NOT_ACTIVE: The [chars] is not activeExplanation The specified route is successfully configured but currently is not active.
Recommended Action Check that the route is correct and the outgoing interface is operationally up.
Error Message IPV6-6-STARTING: IP configuration Manager startedExplanation The IP Configuration Manager service has successfully started.
Recommended Action No action is required.
ISAPI-SLOT# Messages
This section contains the ISAPI-SLOT# messages.
ISAPI-SLOT#-0
Error Message ISAPI-SLOT#-0-INVISTA_EMERG: [chars]Explanation ISAPI-invista software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-0-MSM_EMERG: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-0-NSP_EMERG: [chars]Explanation ISAPI-nsp software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-0-SSM_EMERG: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-0-SSN_EMERG: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
ISAPI-SLOT#-1
Error Message ISAPI-SLOT#-1-INVISTA_ALERT: [chars]Explanation ISAPI-invista software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-1-MSM_ALERT: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-1-NSP_ALERT: [chars]Explanation ISAPI-nsp software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-1-SSM_ALERT: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-1-SSN_ALERT: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
ISAPI-SLOT#-2
Error Message ISAPI-SLOT#-2-INVISTA_CRIT: [chars]Explanation ISAPI-invista software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-2-MSM_CRIT: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-2-NSP_CRIT: [chars]Explanation ISAPI-nsp software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-2-SSM_CRIT: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-2-SSN_CRIT: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
ISAPI-SLOT#-3
Error Message ISAPI-SLOT#-3-INVISTA_ERROR: [chars]Explanation ISAPI-invista software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-3-MSM_ERROR: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-3-NSP_ERROR: [chars]Explanation ISAPI-nsp software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-3-SSM_ERROR: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-3-SSN_ERROR: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
ISAPI-SLOT#-4
Error Message ISAPI-SLOT#-4-INVISTA_WARN: [chars]Explanation ISAPI-invista software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-4-MSM_WARN: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-4-NSP_WARN: [chars]Explanation ISAPI-nsp software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-4-SSM_WARN: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-4-SSN_WARN: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
ISAPI-SLOT#-5
Error Message ISAPI-SLOT#-5-INVISTA_NOTICE: [chars]Explanation ISAPI-invista software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-5-MSM_NOTICE: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-5-NSP_NOTICE: [chars]Explanation ISAPI-nsp software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-5-SSM_NOTICE: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-5-SSN_NOTICE: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
ISAPI-SLOT#-6
Error Message ISAPI-SLOT#-6-INVISTA_INFO: [chars]Explanation ISAPI-invista software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-6-MSM_INFO: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-6-NSP_INFO: [chars]Explanation ISAPI-nsp software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-6-SSM_INFO: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-6-SSN_INFO: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
ISAPI-SLOT#-7
Error Message ISAPI-SLOT#-7-INVISTA_DEBUG: [chars]Explanation ISAPI-invista software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-7-MSM_DEBUG: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-7-NSP_DEBUG: [chars]Explanation ISAPI-nsp software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-7-SSM_DEBUG: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-7-SSN_DEBUG: [chars]Explanation ISAPI software messages.
Recommended Action No action is required.
ISNS Messages
This section contains the ISNS messages.
ISNS-2
Error Message ISNS-2-ISNS_CFS_OPERATION_FAILED: iSNS CFS [chars] failedExplanation ISNS CFS operation failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ISNS-2-ISNS_INIT: iSNS initialization of [chars] [chars]Explanation ISNS initialization failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
IVR Messages
This section contains the IVR messages.
IVR-2
Error Message IVR-2-AUTOLEARN_ACTION_FAIL: failure happens during constructing virtual dynamic pfcid tableExplanation This can happen if failure happens during building, distRIButing or committing the virtual dynamic pfcid table.
Recommended Action Please 1. check the fabric connection or 2. check current virtual user-configured pfcid entries and internally assigned virtual fcid entries for possible conflict.
Error Message IVR-2-AUTOLEARN_FEATURE_NOT_SUPPORT: some switches:[chars] don't support autolearnExplanation This can happen if some switches do not support the virtual pfcid autolearn feature.
Recommended Action Please upgrade the unsupported switches.
Error Message IVR-2-CFS_PEER_LOST_WITHIN_SESSION: CFS peer with switch wwn [chars] was lost in the middle of an active CFS session. Abort the CFS session and re-enter the configuration changesExplanation Due to port flaps, link outages, switch restart etc. a CFS peer switch of IVR was lost. The current configuration changes would not be applied to this peer until the peer merges with this switch. The CFS merge may fail if the configuration at the lost peer conflicts with the changes made in this session. Also, IVR auto topology could be out of sync. with this peer. It is recommended that the user abort this CFS session using ivr abort command and then re-enter the configuration changes.
Recommended Action No action is required.
Error Message IVR-2-DEVICE_FCID_REWRITE_FAILURE: Failure while programming FCID rewrite entries for pWWN [chars] on incoming VSAN [dec]. Device may not be able to communicate with its peer devices, failure reason code: [hex]Explanation Failed to program FCID rewrite entries probably because the hardware ran out of FCID rewrite entries. This can happen if there are too many devices in Inter-VSAN zone or too many local VSANs in VSAN topology.
Recommended Action Reduce the number of devices involved in IVR in the active IVR zone set. Also, reduce the number of redundant transit VSANs, if any.
Error Message IVR-2-DEVICE_STATE_INCOMPATIBLE_WITH_NAT_MODE: State for device with port WWN [chars] could not be restored because it was incompatible with the current NAT mode([dec]). This probably happened because NAT mode was modified without completely deactivating the active IVR zonesetExplanation This probably happened because NAT mode was modified without completely deactivating the active IVR zone set.
Recommended Action The switch needs to be rebooted.
Error Message IVR-2-DEVICE_VSAN_REWRITE_FAILURE: Failure while programming VSAN rewrite entries for pWWN [chars] on incoming VSAN [dec]. Device may not be able to communicate with its peer devicesExplanation Failed to program VSAN rewrite entries probably because the hardware ran out of VSAN rewrite entries. This can happen if there are too many devices in Inter-VSAN zone or too many local VSANs in VSAN topology.
Recommended Action Reduce the number of domains involved in IVR by moving the members of active IVR zone set to fewer switches. Also, reduce the number of redundant transit VSANs, if any.
Error Message IVR-2-INTEROP_MODE_2_OR_3_BF_FAILED: [chars] VSAN [dec] Virtual Domain [chars]Explanation Build Fabric (BF) failed in VSAN [dec]. The BF was initiated in order to remove an unused virtual domain [dec] from the fcdomain list in that VSAN. The virtual domain still remains in the fcdomain list and therefore it would not be available in that VSAN for assignment.
Recommended Action Perform a manual build fabric using fcdomain's interface if you would like to remove the unused virtual domain(s) from the fcdomain list.
Error Message IVR-2-INTEROP_MODE_2_OR_3_RDI_FAILED: VSAN [dec], requested domain [chars], received domain [chars] sWWN [chars]. Return Code [chars]Explanation Request Domain Identifier (RDI) command to allocate virtual domain [dec] failed in VSAN [dec]. Received another domain [chars] instead. IVR-members connected to third-party switch may not participate in IVR communications. It is likely that the domain requested in the RDI command is already in use.
Recommended Action Reassign the domains so that the domain requested via RDI does not overlap with any existing domain in that VSAN.
Error Message IVR-2-IVR_DISABLE_FAILED: Inter-VSAN Routing disable failed for reason: [chars]Explanation Inter-VSAN Routing disable failed for reason: [chars]. Cleanup might not have completed.
Recommended Action Deactivate ivr zone set and disable ivr again. If that fails, then the ivr process would terminate itself in 5 minutes.
Error Message IVR-2-IVZS_ACTIVATION_FAILED_RETRYING: Inter-VSAN zoneset activation failed in VSAN [dec] : [chars]. retrying after [dec] secondsExplanation Inter-VSAN zone set activation failed in VSAN [dec] : [chars]. This could be an intermittent regular zoneset activation error. The activation will be retried in [dec] seconds.
Recommended Action No action is required.
Error Message IVR-2-NO_LICENSE_SHUTDOWN: Inter-VSAN Routing is shutting down.Explanation License required for continued IVR operation is not available. Hence IVR is shutting down.
Recommended Action Install appropriate license for IVR services and then enable IVR again.
Error Message IVR-2-NO_LICENSE_WARNING: Inter-VSAN Routing would shutdown in [dec] seconds.Explanation License required for continued IVR operation is not available. Unless the required license is installed IVR would shutdown in [dec] seconds. IVR configurations would be lost.
Recommended Action Install appropriate license for IVR services to continute to operate uninterrorupted within [dec] seconds.
Error Message IVR-2-PERSISTENT_VIRTUAL_FCID_CONFLICT_WITH_AUTOLEARN: Persistent virtual fcid and dynamic pfcid entriesExplanation This can happen if conflict happens during persistent virtual domain, or virtual fcid entry configuration.
Recommended Action Please assign a non-conflict persistent virtual domain or fcid entry with current dynamic entries.
Error Message IVR-2-PERSISTENT_VIRTUAL_FCID_UNAVAILABLE: to vsan [dec] because the configured persistent virtual domain/fcid could not be assignedExplanation This can happen if the virtual domain/fcid configured by the user is - a) Already in use (either by IVR or a real switch) b) Not allowed due to interop mode or allowed domain list.
Recommended Action Please make sure that the configured virtual domain/fcid is allowed and available for use.
Error Message IVR-2-VIRTUAL_DOMAIN_CONFLICT: In VSAN [dec] virtual domain [dec] from native VSAN [dec] conflicts with native VSAN [dec] for the same virtual domainExplanation Currently advertised virtual domain [dec] in VSAN [dec] is native to VSAN [dec]. This switch has learned of a device that is member of active IVR zone and has the same domain ID, but belongs to a different native VSAN. This device would not be advertised in that VSAN until the domain conflict is resolved.
Recommended Action No action is required.
Error Message IVR-2-VIRTUAL_FCID_UNAVAILABLE: to vsan [dec] because the internally generated FCID conflicts with fcid assigned to WWN [chars]. Please configure fcid for WWN [chars] tooExplanation This can happen if the virtual domain/fcid internally configured is already in use by another active device.
Recommended Action Please assign a different persistent virtual fcid by command.
IVR-3
Error Message IVR-3-ACL_ERROR: ACL API, [chars], failed with error [chars]Explanation IVR invoked ACL API and received the error code. [chars] describes the API and [chars] specifies the error.
Recommended Action No action is required.
Error Message IVR-3-ACL_PERMIT_ENTRY_ERROR: ACL permit entry update on interface [chars] failed for reason: [chars]Explanation ACL could not program permit entries for IVR traffic. [chars] describes the interface named and [chars] describes the system error message from ACL. IVR traffic coming from the interface may be dropped.
Recommended Action If the problem persists, please contact TAC, or your reseller for support.
Error Message IVR-3-ACL_PLOGI_ENTRY_ERROR: PLOGI capture entry update in slot [dec] failed for reason: [chars]Explanation ACL could not program IVR PLOGI could not be programmed. slot[dec] describes the line card slot number and [chars] describes the system error message. PLOGI and its response may be dropped because ivr process cannot capture those frames.
Recommended Action No action is required.
Error Message IVR-3-AFID_CONFLICT: [chars]Explanation AFID configuration is different at different ivr-enabled switches in the same VSAN. Change AFID configuration (auto mode) or VSAN topology configuration (user mode) to make it consistent.
Recommended Action No action is required.
Error Message IVR-3-CFS_INVALID_PAYLOAD_RECEIVED: Inter-VSAN process received invalid payload from CFSExplanation Inter-VSAN process received invalid payload from CFS.
Recommended Action No action is required.
Error Message IVR-3-CLEAR_FAILED: [chars]Explanation An error occurred while clearing the lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IVR-3-COMMIT_FAILED: [chars]Explanation An error occurred while committing configuration. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IVR-3-COMMIT_PARTIALLY_FAILED: [chars]Explanation An error occurred while committing configuration. Configuration could not be committed on some switches. The reason for the failure : [chars]. Configuration can be inconsistent in the fabric.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IVR-3-COMMIT_REJECTED: [chars]Explanation Commit request received from remote switch is rejected. The reason for the failure: [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IVR-3-DDAS_LOCK_TIMER_EXPIRED: IVR database lock is released, as device-alias commit/abort notification is not received in the expected time frame.Explanation When device-alias sends the validation request, IVR database is locked and a timer is started. For any reason, if device-alias commit/abort notification is not received within the expected time frame, the lock timer gets expired and the lock is released. If device-alias commmit notification is received after the lock is released, the changes are not applied and this could cause inconsistency between IVR and device-alias.
Recommended Action No action is required.
Error Message IVR-3-DEVICE_NOT_PREENT_IN_FB_DB_FICON: Device with port WWN [chars] could not be exported to VSANs [chars] because its native switch is not present in the current active fabric binding database of those VSANs.Explanation This happens if FICON is enabled on VSANs [chars] and native switch of device with port WWN [chars] is not present in the current active fabric binding database of those VSANs. This is a requirement for ficon compliance.
Recommended Action No action is required.
Error Message IVR-3-DEVICE_ON_WRONG_NATIVE_AFID_VSAN: Device with port WWN [chars] (FCID:[chars], native VSAN [dec] native AFID [dec]) may not be exported to other VSANs (for Inter-VSAN zoning) because it has come online in VSAN [dec] AFID [dec]Explanation Device has come online on a AFID/VSAN different from the configured native AFID/VSAN.
Recommended Action No action is required.
Error Message IVR-3-DEVICE_ON_WRONG_NATIVE_VSAN: Device with port WWN [chars] (FCID:[chars], native VSAN [dec]) may not be exported to other VSANs (for Inter-VSAN zoning) because domain [hex] exists in VSAN [dec]Explanation Device has come online on a VSAN different from the configured native VSAN or the device does not satisfy unique domain criteria.
Recommended Action No action is required.
Error Message IVR-3-DM_ERROR: Domain Manager API, [chars], failed with error [hex]Explanation IVR invoked DM API and received the error code. [chars] describes the API and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message IVR-3-DOMAIN_DISALLOWED_IN_INTEROP: Device with port WWN [chars] and FCID [chars] may not be able to participate in Inter-VSAN zone since domain [dec] is disallowed in the interop mode for VSAN [dec]Explanation VSAN interop modes place restrictions on what domain ranges are allowed. This domain is out of the range allowed for this interop mode. See the Cisco MDS 9000 Family Configuration Guide for details on the domain range limitations.
Recommended Action Change the domain of the switch to which this IVR zone member is connected to so that it is within the allowed domain list for the interop mode. The domain identifier can be statically assigned using fcdomain interface. You can also configure a range of domains allowed in a VSAN using the fcdomain's 'allowed-domains' interface.
Error Message IVR-3-DOMAIN_UNAVAILABLE: Device with port WWN [chars] and FCID [chars] may not be able to participate in Inter-VSAN zone since domain [dec] is already assigned in VSAN [dec]Explanation Device with port WWN [chars] and FCID [dec] may not be able to participate in Inter-VSAN zone since domain [dec] is already assigned in VSAN [dec].
Recommended Action No action is required.
Error Message IVR-3-FC2_ERROR: FC2 API [chars] failed with error [hex] for [chars]Explanation IVR invoked FC2 API for [chars] socket and received the error code. [chars] describes the API and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message IVR-3-FCID_NAT_MODE_CANNOT_CHANGE: IVR NAT mode cannot be changed. Might cause the fabric NAT mode inconsistencyExplanation Could be caused by active zone set, pending activation /deactivation or non-empty device list.
Recommended Action No action is required.
Error Message IVR-3-FCID_REWRITE_REQUEST_TO_ACL_FAILED: fcid rewrite [chars] request vsan [dec] did [chars] sid [chars] failed:[chars]([hex]).Explanation This happens when either after IVR retried the request a few times or ACL experienced error while processing the request.
Recommended Action No action is required.
Error Message IVR-3-INTERNAL_ERROR: Internal error: [chars]Explanation IVR process encountered a generalerror thatdoes not fall in any of the categories. [chars] describes the error and its context.
Recommended Action No action is required.
Error Message IVR-3-INVALID_ZONE_MEMBER_PROP_INTEROP_MODE_2_3: unsupported member/zone properties in interop mode 2 or 3 [chars]Explanation Inter-VSAN member properties incompatible with interop mode VSAN.
Recommended Action No action is required.
Error Message IVR-3-IVZ_ACTIVATION_FAILED: Inter-VSAN zoneset [chars] activation failedExplanation Inter-VSAN zone set activation failed.
Recommended Action No action is required.
Error Message IVR-3-IVZ_ACTIVATION_FAILED_VSAN: Inter-VSAN zoneset [chars] activation failed in VSAN [dec]Explanation Inter-VSAN zone set activation failed in VSAN.
Recommended Action No action is required.
Error Message IVR-3-IVZ_DEACTIVATION_FAILED: Inter-VSAN zoneset [chars] deactivation failedExplanation Inter-VSAN zone set deactivation failed.
Recommended Action No action is required.
Error Message IVR-3-IVZ_DEACTIVATION_FAILED_VSAN: Inter-VSAN zoneset [chars] deactivation failed in VSAN [dec]Explanation Inter-VSAN zone set deactivation failed in VSAN.
Recommended Action No action is required.
Error Message IVR-3-LOCK_FAILED: [chars]Explanation An error occurred while acquiring the lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IVR-3-MERGE_ACTIVATION_FAILED: [chars]Explanation An error occurred while activating merged configuration. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IVR-3-MERGE_FAILED: [chars]Explanation An error occurred while merging configuration. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IVR-3-MTS_ERROR: MTS message transmission failed with error [dec]Explanation IVR process unsuccessfully tried to send an MTS message. MTS error number is specified in [dec].
Recommended Action No action is required.
Error Message IVR-3-NS_ERROR: FCNS API, [chars], failed with error [hex]Explanation IVR invoked FCNS API and received the error code. [chars] describes the API and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message IVR-3-PSS_CFG_RESTORE_ERROR: Configuration restoration for [chars] failed with error [hex]Explanation IVR read the saved configuration and encountered an error while rebuilding the runtime configuration. [chars] describes the configuration which the process tried to restore and 0x[hex] is the system err code.
Recommended Action No action is required.
Error Message IVR-3-PSS_ERROR: PSS operation [chars] returned error: [hex]Explanation [chars] specifies the context where the failure occurred and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message IVR-3-PSS_RTDB_RESTORE_ERROR: Runtime database restoration for [chars] failed with error [hex]Explanation IVR read the saved runtime database and encountered an error while rebuilding the runtime database. [chars] describes the runtime database which the process tried to restore and 0x[hex] is the system error code.
Recommended Action No action is required.
Error Message IVR-3-QOS_IOD_UNDROP_REQUEST_TO_ACL_FAILED: qos iod undrop request vsan [dec] did [chars] failed:[chars].Explanation This happens when either after IVR retried the request a few times or ACL experienced error while processing the request.
Recommended Action No action is required.
Error Message IVR-3-RIB_ERROR: RIB API, [chars], failed with error [hex]Explanation IVR invoked RIB API and received the error code. [chars] describes the API and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message IVR-3-ROUTE_REQUEST_TO_ACL_FAILED: route [chars] request vsan [dec] domain [dec] failed:[chars].Explanation This happens when either after IVR retried the request a few times or ACL experienced error while processing the request.
Recommended Action No action is required.
Error Message IVR-3-TOPOLOGY_COMPUTATION_FAILED: Inter-VSAN Topology computation has failed due to: [chars]Explanation Inter-VSAN Topology has failed due to [chars]. Possible reasons are (a) Number of AFID/VSAN combination is more than the maximum supported value of 128, or (b) Number of ivr-enabled switches is more than the maximum supported value of 128.
Recommended Action No action is required.
Error Message IVR-3-UNEXPECTED_MTS_MSG: Unexpected MTS message, opcode [dec], is receivedExplanation IVR process received unexpected MTS event. MTS opcode is specified in [dec].
Recommended Action No action is required.
Error Message IVR-3-UNLOCK_FAILED: [chars]Explanation An error occurred while releasing the lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IVR-3-VSAN_SEGMENTED: [chars]Explanation VSAN is segmented. VSAN is removed from the topology graph and therefore no Inter-VSAN traffic can flow through this VSAN.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IVR-3-ZS_POLICY_IS_DENY_NO_ACTIVE_ZS: Default zone behavior policy is deny on VSAN [dec] and there is no active zonesetExplanation Default zone behavior is deny and there is no active zone set. Inter-VSAN zone members may not be able communicate in this VSAN.
Recommended Action No action is required.
Error Message IVR-3-ZS_POLICY_IS_PERMIT_NO_FORCE: Default zone behavior policy is permit on VSAN [dec] and the force option is offExplanation Default zone behavior is permit and the force option is off. Inter-VSAN zone set activation on this VSAN has failed.
Recommended Action No action is required.
Error Message IVR-3-ZS_POLICY_IS_PERMIT_ZS_DEACTIVATED: Default zone behavior policy is permit on VSAN [dec] and regular zoneset deactivatedExplanation Default zone behavior is permit and regular zone set is deactivated. Inter-VSAN zone members may not be able to communicate.
Recommended Action No action is required.
IVR-4
Error Message IVR-4-AUTO_TOPOLOGY_UPDATE_DISCARDED: [chars]Explanation Received auto topology update is discarded due to conflicts.
Recommended Action No action is required.
Error Message IVR-4-FCID_REWRITE_REQUEST_TO_ACL_FAILED_AND_RETRYING: fcid rewrite [chars] request vsan [dec] did [chars] sid [chars] failed:[chars]([hex]). Retrying the request again.Explanation This happens when either any of the line cards being upgraded or ACL experienced error while processing the request.
Recommended Action No action is required.
Error Message IVR-4-PERSISTENT_VIRTUAL_DOMAIN_MERGE_CONFLICT: [chars]Explanation Merge failed due to conflict in the persistent virtual domain configuration.
Recommended Action No action is required.
Error Message IVR-4-PERSISTENT_VIRTUAL_FCID_MERGE_CONFLICT: [chars]Explanation Merge failed due to conflict in the persistent virtual fcid configuration.
Recommended Action No action is required.
Error Message IVR-4-QOS_IOD_UNDROP_REQUEST_TO_ACL_FAILED_AND_RETRYING: qos iod undrop request vsan [dec] did [chars] failed:[chars]. Retrying the request again.Explanation This happens when either any of the line cards being upgraded or ACL experienced error while processing the request.
Recommended Action No action is required.
Error Message IVR-4-ROUTE_REQUEST_TO_ACL_FAILED_AND_RETRYING: route [chars] request vsan [dec] domain [dec] failed:[chars]. Retrying the request again.Explanation This happens when either any of the line cards being upgraded or ACL experienced error while processing the request.
Recommended Action No action is required.
Error Message IVR-4-UNKNOWN_NATIVE_VSAN: Unknown native VSAN for the virtual domain [dec] in VSAN [dec] local native VSAN for the same virtual domain is [dec]Explanation Could not determine native VSAN of the currently advertised virtual domain [dec] in VSAN [dec]. This switch has learned of a device that is member of active IVR zone has the same domain ID, and belongs to native VSAN [dec]. This device would not be advertised in that VSAN until the native VSAN information is resolved.
Recommended Action No action is required.
IVR-5
Error Message IVR-5-FCID_NAT_MODE_ACTIVATED: FCID network address translation (NAT) mode has been activatedExplanation FCID network address translation (NAT) mode has been activated.
Recommended Action No action is required.
Error Message IVR-5-FCID_NAT_MODE_DEACTIVATED: FCID network address translation (NAT) mode has been deactivatedExplanation FCID network address translation (NAT) mode has been deactivated.
Recommended Action No action is required.
Error Message IVR-5-IVR_ASSERTION_FAILED: Unexpected assertion failure in File [chars] at Line [dec]Explanation An assertion failed in IVR code.
Recommended Action No action is required.
Error Message IVR-5-IVZ_ACTIVATED: Inter-VSAN zoneset [chars] activatedExplanation Inter-VSAN zone set activated[dec].
Recommended Action No action is required.
Error Message IVR-5-IVZ_ACTIVATED_VSAN: Inter-VSAN zoneset [chars] activated in VSAN [dec]Explanation Inter-VSAN zone set activated in VSAN[dec].
Recommended Action No action is required.
Error Message IVR-5-IVZ_CLEANUP_DONE: Inter-VSAN clean-up is doneExplanation Inter-VSAN related configuration is cleaned up before exiting.
Recommended Action No action is required.
Error Message IVR-5-IVZ_CLEANUP_DONE_BY_TIMER: Inter-VSAN clean-up is not done after waiting for 5 minutesExplanation Inter-VSAN related configuration might not be cleaned up before the ivr process is terminated.
Recommended Action If the problem persists, you may have to reboot your switch to clean up the old IVR configuration.
Error Message IVR-5-IVZ_DEACTIVATED: Inter-VSAN zoneset [chars] deactivatedExplanation Inter-VSAN zone set deactivated[dec].
Recommended Action No action is required.
Error Message IVR-5-IVZ_DEACTIVATED_VSAN: Inter-VSAN zoneset [chars] deactivated in VSAN [dec]Explanation Inter-VSAN zone set deactivated in VSAN[dec].
Recommended Action No action is required.
Error Message IVR-5-IVZ_PARTIALLY_ACTIVATED: Inter-VSAN zoneset [chars] partially activatedExplanation Inter-VSAN zone set activated[dec].
Recommended Action Check if it is successful in all VSANs by doing show IVR zone set status.
Error Message IVR-5-IVZ_PARTIALLY_DEACTIVATED: Inter-VSAN zoneset [chars] partially deactivatedExplanation Inter-VSAN zone set deactivated[dec].
Recommended Action Check if it is successful in all VSANs by doing show IVR zone set status.
Error Message IVR-5-IVZS_ACTIVATION_RETRYING: Inter-VSAN zoneset activation did not go through because of [chars], retrying in VSAN [dec] after [dec] secondsExplanation Inter-VSAN zone set activation failed because of [chars] in VSAN [dec]. This could be an intermittent regular zoneset activation error. The activation will be retried in [dec] seconds.
Recommended Action No action is required.
Error Message IVR-5-IVZS_WAITING_FOR_LOWEST_SWWN: Waiting for lowest switch WWN Inter-VSAN enabled switch in VSAN [dec]Explanation Only lowest switch WWN Inter-VSAN enabled switch adds the Inter-VSAN zones to the regular active zone set in a VSAN. This local switch is not the lowest sWWN switch in VSAN [dec].
Recommended Action No action is required.
Error Message IVR-5-LICENSE_CHECKIN_FAILED: Failed to checkin [chars] license: Err=[chars]Explanation Failed to check in [chars] license.
Recommended Action No action is required.
Error Message IVR-5-SERVICE_GROUP_ACTIVATED: Inter-VSAN Service Group has been activatedExplanation Inter-VSAN Service Group has been activated.
Recommended Action No action is required.
Error Message IVR-5-SERVICE_GROUP_DEACTIVATED: Inter-VSAN Service Group has been deactivatedExplanation Inter-VSAN Service Group has been deactivated.
Recommended Action No action is required.
Error Message IVR-5-VSAN_NO_LONGER_SEGMENTED: [chars]Explanation VSAN is no longer segmented. VSAN is added back to the topology graph and therefore Inter-VSAN traffic can now flow through this VSAN.
Recommended Action No action is required.
Error Message IVR-5-VSAN_TOPOLOGY_ACTIVATED: Inter-VSAN Topology has been activatedExplanation Inter-VSAN Topology has been activated.
Recommended Action No action is required.
IVR-6
Error Message IVR-6-DRAV_ASYNC_DOMAIN_RELEASE: [chars]Explanation DRAV FSM has unconditionally released a domain due to conflict after a fabric merge. The details are in [chars].
Recommended Action No action is required.
Error Message IVR-6-DRAV_CRITICAL_RETRY_EXCEED: [chars]Explanation DRAV FSM frames are attempting to be resent. The details are in [chars].
Recommended Action No action is required.
Error Message IVR-6-DRAV_DOMAIN_ALLOC: Virtual domain [dec] for Native AFID: [dec] Native VSAN [dec]Explanation A virtual domain indicated by [dec] has been reserved for a device with native AFID [dec] and native VSAN [dec].
Recommended Action No action is required.
Error Message IVR-6-DRAV_DOMAIN_RELEASE: Virtual domain [dec] for Native AFID: [dec] Native VSAN [dec]Explanation A virtual domain indicated by [dec] has been released used by devices with native AFID [dec] and native VSAN [dec].
Recommended Action No action is required.
Error Message IVR-6-DRAV_TOPO_UPDATE: [chars]Explanation DRAV FSM Topology has been updated as indicated by [chars].
Recommended Action No action is required.
Error Message IVR-6-LICENSE_VALID: A valid license for Inter-VSAN Routing has been obtainedExplanation A valid license for Inter-VSAN Routing has been obtained.
Recommended Action No action is required.
IVR-7
Error Message IVR-7-CFS_REQ_RCVD: [chars]Explanation CFS request is received. The WWN of the switch originated this request and the rr-token of the request are provided in the syslog message.
Recommended Action No action is required.
Error Message IVR-7-CFS_RESP_SENT: [chars]Explanation CFS response is sent. The rr-token of the corresponding request and the status are provided in the syslog message.
Recommended Action No action is required.
L2FM Messages
This section contains the L2FM messages.
L2FM-0
Error Message L2FM-0-L2FM_CLI_INITIALIZATION_FAILED: CLI library initialization failed!Explanation Failed to initialize CLI infrastructure\sbackendlibrary.Thisisafatalerror.'
Recommended Action No action is required.
Error Message L2FM-0-L2FM_VDC_GWMAC_GET_FAILED: Failed to get gwmac for VDCExplanation Failed to get gwmac for VDC.
Recommended Action No action is required.
Error Message L2FM-0-L2FM_WRITE_TO_PSS_FAILED_IN_PREVIOUS_INCARNATION: PSS Write Failed in pervious incarnation. Stateful restart not possibleExplanation PSS Write Failed in pervious incarnation. Stateful restart not possible.
Recommended Action No action is required.
L2FM-1
Error Message L2FM-1-L2FM_WRITE_TO_PSS_FAILED: Failed to write to PSS err [chars]Explanation Failed to write to PSS error [chars].
Recommended Action No action is required.
L2FM-2
Error Message L2FM-2-L2FM_AGING_TIME_SET_FAILED: Failed to set age time [dec] for vlan [dec]Explanation Failed to set age time [dec] for vlan [dec].
Recommended Action No action is required.
Error Message L2FM-2-L2FM_GLBL_AGING_TIME_SET_FAILED: Failed to set global age time [dec]Explanation Failed to set global age time [dec].
Recommended Action No action is required.
Error Message L2FM-2-L2FM_SMAC_INS_FAILED: Failed to insert static mac for VLAN:[dec] MAC:[chars] IfIndex:[hex] Slot:[dec]Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
L2FM-6
Error Message L2FM-6-L2FM_MTS_SEND_FAILED: Failed to send MTS message errno [hex] opcode [dec]Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
L2FMC-SLOT# Messages
This section contains the L2FMC-SLOT# messages.
L2FMC-SLOT#-0
Error Message L2FMC-SLOT#-0-L2FMC_CLI_INIT_FAILED: CLI library initialization failed!Explanation L2FMC failed to initialize CLI infrastructure\sbackendlibrary.Thisisafatalerror.'
Recommended Action No action is required.
Error Message L2FMC-SLOT#-0-L2FMC_TIMER_INIT_FAILED: Timer subsystem initialization failed!Explanation L2FMC failed to initialize timer library. This is a fatal error.
Recommended Action No action is required.
L2FMC-SLOT#-2
Error Message L2FMC-SLOT#-2-L2FMC_MEM_ALLOC: Memory allocation failed. [chars]Explanation Memory allocation failed. This is a critical failure.
Recommended Action No action is required.
Error Message L2FMC-SLOT#-2-L2FMC_VLAN_NOT_FOUND: VLAN [dec] not found in L2FMC database!Explanation L2FMC failed to find VLAN [dec] in its database. L2 MAC learning and aging on VLAN [dec] may be affected.
Recommended Action No action is required.
L2FMC-SLOT#-5
Error Message L2FMC-SLOT#-5-L2FMC_GLBL_AGE_CONFIG_FAIL: Global age value configuration to [dec] seconds failed!Explanation L2FMC failed to configure global default age to [dec] seconds.
Recommended Action No action is required.
Error Message L2FMC-SLOT#-5-L2FMC_VLAN_AGE_CONFIG_FAIL: VLAN Age configuration to [dec] seconds failed!Explanation L2FMC failed to configure age for VLAN [dec] to [dec] seconds.
Recommended Action No action is required.
L2FMC-SLOT#-6
Error Message L2FMC-SLOT#-6-L2FMC_GLBL_AGE_CONFIGURED: Global age value configured to [dec] seconds.Explanation L2FMC has successfully configured global default age to [dec] seconds.
Recommended Action No action is required.
Error Message L2FMC-SLOT#-6-L2FMC_INITIALIZED: Internal state created [chars]Explanation L2FMC has created its internal state stateless/stateful [chars].
Recommended Action No action is required.
Error Message L2FMC-SLOT#-6-L2FMC_VDC_CREATED: VDC [dec] createdExplanation Request to create VDC [dec] in L2FMC was successful.
Recommended Action No action is required.
Error Message L2FMC-SLOT#-6-L2FMC_VDC_REMOVED: VDC [dec] RemovedExplanation L2FMC has successfully removed VDC [dec] from its databases.
Recommended Action No action is required.
Error Message L2FMC-SLOT#-6-L2FMC_VDC_VLAN_CREATED: VLAN [dec] createdExplanation L2FMC has added VLAN [dec].
Recommended Action No action is required.
Error Message L2FMC-SLOT#-6-L2FMC_VDC_VLAN_REMOVED: VLAN [dec] removed from VDC [dec]Explanation L2FMC has successfully removed VLAN [dec] from VDC [dec].
Recommended Action No action is required.
Error Message L2FMC-SLOT#-6-L2FMC_VLAN_AGE_CONFIGURED: Age configured for VLAN [dec] to [dec] seconds.Explanation L2FMC has successfully configured age for VLAN [dec] to [dec] seconds.
Recommended Action No action is required.
L2MCAST-SLOT# Messages
This section contains the L2MCAST-SLOT# messages.
L2MCAST-SLOT#-0
Error Message L2MCAST-SLOT#-0-L2MCAST_CLI_INIT_FAILED: CLI library initialization failed!Explanation L2MCAST failed to initialize CLI infrastructure\sbackendlibrary.Thisisafatalerror.'
Recommended Action No action is required.
Error Message L2MCAST-SLOT#-0-L2MCAST_TIMER_INIT_FAILED: Timer subsystem initialization failed!Explanation L2MCAST failed to initialize timer library. This is a fatal error.
Recommended Action No action is required.
L2MCAST-SLOT#-2
Error Message L2MCAST-SLOT#-2-L2MCAST: Memory allocation failed. [chars]Explanation Memory allocation failed. This is a critical failure.
Recommended Action No action is required.
Error Message L2MCAST-SLOT#-2-L2MCAST_VLAN_NOT_FOUND: VLAN [dec] not found in L2MCAST database!Explanation L2MCAST failed to find VLAN [dec] in its database. L2 MAC learning and aging on VLAN [dec] may be affected.
Recommended Action No action is required.
L2MCAST-SLOT#-6
Error Message L2MCAST-SLOT#-6-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan [dec] ([dec], [chars], [chars]) entry!Explanation L2MCAST failed to insert bd, g, s entry in hardware. Igmp snooping may not be effective on vlan for that group and source.
Recommended Action No action is required.
Error Message L2MCAST-SLOT#-6-L2MCAST_INITIALIZED: Internal state created [chars]Explanation L2MCAST has created its internal state stateless/stateful [chars].
Recommended Action No action is required.
Error Message L2MCAST-SLOT#-6-L2MCAST_VDC_CREATED: VDC [dec] createdExplanation Request to create VDC [dec] in L2MCAST was successful.
Recommended Action No action is required.
Error Message L2MCAST-SLOT#-6-L2MCAST_VDC_REMOVED: VDC [dec] RemovedExplanation L2MCAST has successfully removed VDC [dec] from its databases.
Recommended Action No action is required.
Error Message L2MCAST-SLOT#-6-L2MCAST_VDC_VLAN_CREATED: VLAN [dec] createdExplanation L2MCAST has added VLAN [dec].
Recommended Action No action is required.
Error Message L2MCAST-SLOT#-6-L2MCAST_VDC_VLAN_REMOVED: VLAN [dec] removed from VDC [dec]Explanation L2MCAST has successfully removed VLAN [dec] from VDC [dec].
Recommended Action No action is required.
LACP Messages
This section contains the LACP messages.
LACP-3
Error Message LACP-3-GENERAL_ERROR: [chars]Explanation General error.
Recommended Action No action is required.
Error Message LACP-3-LACP_MEM_PC_MISCFG: LACP misconfiguration detected on [chars]: ([chars] [dec]-[dec][chars] [dec]-[dec])Explanation There was an LACP misconfiguration.
Recommended Action No action is required.
Error Message LACP-3-LACP_MISCFG: LACP misconfiguration detected on [chars]: ([chars])Explanation There was an LACP misconfiguration.
Recommended Action No action is required.
Error Message LACP-3-LACP_SUSPEND_HALF_DUPLEX_PORT: Port [chars] is in half duplex mode. suspend portExplanation LACP is not supported in half duplex mode. Suspend port.
Recommended Action No action is required.
Error Message LACP-3-LACP_UPGRADE_READY_FAILED: Upgrade ready was returned failure.Explanation Upgrade ready event was returned failure since one of the ports in port channels were found to be in intermediate state.
Recommended Action No action is required.
Error Message LACP-3-PACKET_TRANSMIT_ERR: [chars]: Could not send LACP packet err=[dec]Explanation There was an error in sending LACP packet.
Recommended Action No action is required.
Error Message LACP-3-SYN_COLL_DIS_EN: [chars] [[chars]]: SYNC, COLLECT and DISTRIBUTE flags enabled too early by partnerExplanation Potential interop issue. Partner system seems to have enabled synchronizationas well collecting or distRIButing flags too early even before actor has selected an aggregator.
Recommended Action No action is required.
Error Message LACP-3-SYSTEM_MAC_ERR: [chars]: Could not get system mac[[chars]]Explanation There was an error in acquiring system mac from VDC Mgr.
Recommended Action No action is required.
LACP-5
Error Message LACP-5-LACP_DISABLED: LACP DisabledExplanation LACP Service Disabled.
Recommended Action No action is required.
Error Message LACP-5-LACP_ENABLED: LACP EnabledExplanation LACP Service Enabled.
Recommended Action No action is required.
Error Message LACP-5-LACP_REMOTE_NOTIFY_SUCCESS: Remote notify event.Explanation Remote notify event was returned success.
Recommended Action No action is required.
Error Message LACP-5-LACP_UPGRADE_READY_SUCCESS: Upgrade ready was returned success.Explanation Upgrade ready event was returned success since all ports in port channels were found in steady state.
Recommended Action No action is required.
Error Message LACP-5-PORT_PRIORITY_CHANGED: [chars]: LACP port priority changed from [dec] to [dec]Explanation LACP port priority has been changed.
Recommended Action No action is required.
Error Message LACP-5-SYSTEM_PRIORITY_CHANGED: LACP system priority changed from [hex] to [hex]Explanation LACP system priority has been changed.
Recommended Action No action is required.
LC-FCFWD Messages
This section contains the LC-FCFWD messages.
LC-FCFWD-3
Error Message LC-FCFWD-3-ERROR: [chars]Explanation Lc_fcfwd encountered an error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
LC-SPAN Messages
This section contains the LC-SPAN messages.
LC-SPAN-3
Error Message LC-SPAN-3-ERROR: [chars]Explanation Lc_span_mgr encountered an error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
LC_CFG-SLOT# Messages
This section contains the LC_CFG-SLOT# messages.
LC_CFG-SLOT#-2
Error Message LC_CFG-SLOT#-2-LC_CFG_ABORT: registration aborted with code [dec]Explanation Process lc_cfg_mgr aborted registration.
Recommended Action No action is required.
Error Message LC_CFG-SLOT#-2-LC_CFG_EXITED: exited with code [dec]Explanation Process lc_cfg_mgr exited.
Recommended Action No action is required.
Error Message LC_CFG-SLOT#-2-LC2_CPU_ERRORS: [chars], Total IC [dec], DC [dec], Tag [dec], MBit [dec], SBit [dec], I30 [dec]Explanation LC CPU Cache errors.
Recommended Action No action is required.
LC_PORT_CHANNEL-SLOT# Messages
This section contains the LC_PORT_CHANNEL-SLOT# messages.
LC_PORT_CHANNEL-SLOT#-0
Error Message LC_PORT_CHANNEL-SLOT#-0-HW_FAILURE: fatal error in configureing [chars]: [chars]Explanation Fatal hardware error in port channel configuration.
Recommended Action Reset the module.
Error Message LC_PORT_CHANNEL-SLOT#-0-IDX_FULL: D_IDX table full (current [dec], new [dec], total [dec])Explanation Programming error in port channel configuration.
Recommended Action Reset the module.
LC_PORT_CHANNEL-SLOT#-3
Error Message LC_PORT_CHANNEL-SLOT#-3-LC_PORT_CHANNEL_ERROR: [chars]Explanation General error.
Recommended Action No action is required.
Error Message LC_PORT_CHANNEL-SLOT#-3-LC_PORT_CHANNEL_IDXMAP_FAILURE: could not lookup port index for interface [chars]Explanation Could not look up port index.
Recommended Action No action is required.
LC_PORT_MGR-SLOT# Messages
This section contains the LC_PORT_MGR-SLOT# messages.
LC_PORT_MGR-SLOT#-2
Error Message LC_PORT_MGR-SLOT#-2-LC_MTS_ERROR: An MTS error has occurred in ([chars]) with the following conditions: opc=[dec] ssap=[hex] dsap=[hex] syserr=[hex]Explanation This is a software error in message communication between two applications.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
LC_RDL Messages
This section contains the LC_RDL messages.
LC_RDL-3
Error Message LC_RDL-3-SYSLOG_ALLOC_FAIL: : [chars]Explanation RDL malloc failed : [chars].
Recommended Action No action is required.
Error Message LC_RDL-3-SYSLOG_CONTEXT_ERR: : [chars] [dec]Explanation RDL context error: [chars] [dec].
Recommended Action No action is required.
Error Message LC_RDL-3-SYSLOG_ERR: : [chars]Explanation RDL syslog errors : [chars].
Recommended Action No action is required.
Error Message LC_RDL-3-SYSLOG_EXIT: : [chars]Explanation RDL exiting on errors : [chars].
Recommended Action No action is required.
Error Message LC_RDL-3-SYSLOG_INIT_FAIL: : [chars] [chars]Explanation RDL Init Failed: [chars] [chars].
Recommended Action No action is required.
Error Message LC_RDL-3-SYSLOG_MTS_ERR: : [chars]Explanation RDL MTS errors : [chars].
Recommended Action No action is required.
Error Message LC_RDL-3-SYSLOG_MTS_REG_FAILED: : [dec] [dec]Explanation RDL context error: [dec] [dec].
Recommended Action No action is required.
LC_RDL-6
Error Message LC_RDL-6-SYSLOG_DEBUG_1: : [chars] [hex]Explanation RDL Debug logs: [chars] [dec].
Recommended Action No action is required.
Error Message LC_RDL-6-SYSLOG_DEBUG_2: : [chars] [hex]Explanation RDL Debug logs: [chars] [dec].
Recommended Action No action is required.
Error Message LC_RDL-6-SYSLOG_INFO: : [chars]Explanation RDL Debug logs: [chars].
Recommended Action No action is required.
Error Message LC_RDL-6-SYSLOG_RESP_RCVD: : [chars] [dec]Explanation RDL context error: [chars] [dec].
Recommended Action No action is required.
LIBGD Messages
This section contains the LIBGD messages.
LIBGD-2
Error Message LIBGD-2-GD_ACCESS_FAILED: Guardian Failed to access reg for [chars]Explanation Guardian Access failed.
Recommended Action No action is required.
Error Message LIBGD-2-GD_CATASTROPHIC: Guardian catastrophic failure: [chars]Explanation Guardian catastrophic error.
Recommended Action No action is required.
Error Message LIBGD-2-GD_INTR: Guardian Interrupt occurred: [chars]Explanation Interrorupt occurred on the Guardian.
Recommended Action No action is required.
Error Message LIBGD-2-SHUTDOWN: Guardian software process exiting: [chars]Explanation Guardian shutting down.
Recommended Action No action is required.
LIBGD-3
Error Message LIBGD-3-EN_DATA_FAILED: Guardian enable port failed for inst:[dec] port:[dec]Explanation Guardian Enable port failed for the guardian.
Recommended Action No action is required.
LIBGD-5
Error Message LIBGD-5-STARTING: Guardian process startingExplanation Guardian process is being started.
Recommended Action No action is required.
LIBGD-6
Error Message LIBGD-6-DIS_DATA: Guardian disable port done for inst:[dec] port:[dec]Explanation Disabled port successfully for guardian.
Recommended Action No action is required.
Error Message LIBGD-6-EN_PORT: Guardian enable port done for inst:[dec] port:[dec]Explanation Enabled port for the Guardian.
Recommended Action No action is required.
Error Message LIBGD-6-HW_INIT: GuardianHW initialization has been done for inst: [dec] port: [dec]Explanation Guardian HW initializtion has been called[dec].
Recommended Action No action is required.
LICMGR Messages
This section contains the LICMGR messages.
LICMGR-2
Error Message LICMGR-2-LOG_LIC_EXIT: License manager exiting: [chars]Explanation License manager exiting.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message LICMGR-2-LOG_LIC_GRACE_EXPIRED: Grace period expired for feature [chars].Explanation Unlicensed feature [chars] has exceeded its grace time period. Applications using will be shut down immediately.
Recommended Action Install the license file to continue using the feature.
Error Message LICMGR-2-LOG_LIC_INVALID_SERVER_LINE: License file [chars] contains invalid SERVER line. Contact TACExplanation Invalid SERVER line in license file.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message LICMGR-2-LOG_LIC_NVRAM_DISABLED: Licensing NVRAM is not available. Grace period will be disabled: [chars]Explanation The Supervisor NVRAM block may have a hardware problem and may need to be replaced.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message LICMGR-2-LOG_LIC_VENDOR_DOWN: License file contains invalid SERVER line. Vendor daemon downExplanation Vendor daemon is down.
Recommended Action Licensing.
LICMGR-3
Error Message LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for feature [chars].Explanation One or more license files for feature [chars] are missing and must be reinstalled.
Recommended Action Install the license file to continue using the feature.
Error Message LICMGR-3-LOG_LIC_INVALID_HOSTID: Invalid license hostid VDH=[chars] for feature [chars].Explanation Feature [chars2] has a license with an invalid license hostid VDH=[chars1]. This can occur if a supervisor module with licensed features for one switch is installed on another switch.
Recommended Action No action is required.
Error Message LICMGR-3-LOG_LIC_LICENSE_EXPIRED: Evaluation license expired for feature [chars].Explanation The named feature has exceeded its evaluation time period. Applications using the license will be shut down after a grace period.
Recommended Action Install the license file to continue using the feature.
Error Message LICMGR-3-LOG_LIC_MESSAGE_ERROR: could not handle message: [chars] of type [dec] from addr [dec]:[dec].Explanation Could not handle a IPC message [chars] of type [dec1] sent by a component running on node [dec2] with sap [dec3].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message LICMGR-3-LOG_LIC_NO_LIC: No license(s) present for feature [chars]. Application(s) shut down in [dec] days.Explanation Feature [chars] has not been licensed. The feature will work for a grace period of [dec] days after which application(s) using the feature will be shut down.
Recommended Action Install the license file to continue using the feature.
Error Message LICMGR-3-LOG_LIC_SERVER_DOWN: License Server Down [dec]Explanation A connection to the license server was lost.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message LICMGR-3-LOG_LIC_SPROM_LIC: Feature [chars] issued [dec] licenses without a valid license file.Explanation Feature [chars] has been licensed [dec] times without a valid license file. This means one or more license files are missing for feature [chars] and must be reinstalled.
Recommended Action Install the license file to continue using the feature.
Error Message LICMGR-3-LOG_LIC_TOO_MANY_LIC: Only [dec] licenses are supported for [chars] feature, where as [dec] licenses are installed.Explanation More licenses are installed than allowed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message LICMGR-3-LOG_LICAPP_NO_LIC: Application [chars] running without [chars] license, shut down in [dec] days.Explanation Application [chars1] has not been licensed. The application will work for a grace period of [dec] days after which it will be shut down unless a license file for feature [chars2] is installed.
Recommended Action Install the license file to continue using the feature.
LICMGR-4
Error Message LICMGR-4-LOG_LIC_LICENSE_EXPIRY_WARNING: Evaluation license for feature [chars] will expire in [dec] days.Explanation Feature [chars] will exceed its evaluation time period in [dec] days and will be shut down.
Recommended Action Install the license file to continue using the feature.
Error Message LICMGR-4-LOG_LICAPP_EXPIRY_WARNING: Application [chars] evaluation license [chars] expiry in [dec] days.Explanation Application [chars1] will exceed its evaluation time period in [dec] days and will be shut down after a grace period unless a permanent license for feature [chars2] is installed.
Recommended Action Install the license file to continue using the feature.
LICMGR-6
Error Message LICMGR-6-LOG_LIC_FEATURE_CLEARED: Cleared [dec] license(s) for feature [chars].Explanation Uninstalled [dec] license(s) for feature [chars].
Recommended Action Use the 'show license usage' command to verify this license feature removal.
Error Message LICMGR-6-LOG_LIC_FEATURE_INSTALLED: Installed [dec] license(s) for feature [chars].Explanation Installed [dec] license(s) for feature [chars].
Recommended Action Use the 'show license usage' command to verify this license feature installation.
Error Message LICMGR-6-LOG_LIC_LICENSE_CLEARED: Cleared license file [chars].Explanation Uninstalled the named license file.
Recommended Action Use the 'show license' command to verify this license removal.
Error Message LICMGR-6-LOG_LIC_LICENSE_CLEARED_ALL: Cleared all licenses.Explanation Cleared all license files.
Recommended Action No action is required.
Error Message LICMGR-6-LOG_LIC_LICENSE_INSTALLED: Installed license file [chars].Explanation Installed the named license file.
Recommended Action Use the 'show license' command to verify this license installation.
MAC-SLOT# Messages
This section contains the MAC-SLOT# messages.
MAC-SLOT#-2
Error Message MAC-SLOT#-2-MAC_INFO: [chars]Explanation MAC Informational message.
Recommended Action No action is required.
MCAST Messages
This section contains the MCAST messages.
MCAST-2
Error Message MCAST-2-SHUTDOWN: Process shutting down: [chars]Explanation Mcast is shutting down.
Recommended Action The action depends on the situation. The multicast process can shut down gracefully because of a system restart (in which case no action needs to take place) or because of a failure. The message associated with the syslog should be self explanatory to understand the reason for the shutdown. If the process is able to restart properly, there is no immediate harm for the system stability and the suggested action is to report the syslog event together with an explanation of the operations most recently performed on the system.
MCAST-4
Error Message MCAST-4-ERROR: [chars]Explanation Mcast encountered a generic error.
Recommended Action No action is required.
MCAST-5
Error Message MCAST-5-BAD_MSG: Received bad message: [chars]Explanation Mcast has received a malformed/unrecognized message.
Recommended Action No action is required.
Error Message MCAST-5-START: Process has been startedExplanation Mcast has been started.
Recommended Action No action is required.
MCECTEST Messages
This section contains the MCECTEST messages.
MCECTEST-3
Error Message MCECTEST-3-ASSERTION_FAILED: [chars]Explanation MCECTEST has hit an assert condition at file [chars].
Recommended Action No action is required.
Error Message MCECTEST-3-INIT_FAIL: [chars]Explanation MCECTEST Initialization failed. due to [chars].
Recommended Action No action is required.
Error Message MCECTEST-3-INTERNAL_ERR: [chars]Explanation MCECTEST encountered an internal error due to [chars].
Recommended Action No action is required.
Error Message MCECTEST-3-MTS_ERR: [chars]Explanation MCECTEST encountered an MTS error due to [chars].
Recommended Action No action is required.
MCECTEST-5
Error Message MCECTEST-5-MCECTEST_DISABLED: MCECTEST DisabledExplanation MCECTEST Service Disabled.
Recommended Action No action is required.
Error Message MCECTEST-5-MCECTEST_ENABLED: MCECTEST EnabledExplanation MCECTEST Service enabled.
Recommended Action No action is required.
MCECTEST-6
Error Message MCECTEST-6-INTERNAL_INFO: [chars]Explanation MCECTEST got an internal information[chars].
Recommended Action No action is required.
MCM Messages
This section contains the MCM messages.
MCM-5
Error Message MCM-5-MCM_SDB_UPDATE_FAILED: sdb update failed with ret_val [dec]Explanation SDB updated failed for MCM.
Recommended Action No action is required.
MFDM Messages
This section contains the MFDM messages.
MFDM-2
Error Message MFDM-2-INTERNAL_ERROR: MFDM-[chars] Internal error : show system internal mfdm errors for more informationExplanation MFDM PD hit a internal error. show system internal mfdm errors for futher analysis.
Recommended Action No action is required.
MODULE Messages
This section contains the MODULE messages.
MODULE-2
Error Message MODULE-2-LCM_PRE_UPGRADE_GENERAL_FAIL: Pre upgrade message fails seq [dec]Explanation Pre upgrade message failed.
Recommended Action No action is required.
Error Message MODULE-2-LCM_UPGRADE_DONE_GENERAL_FAIL: Upgrade done message fails SAP [chars]Explanation Upgrade ready message failed.
Recommended Action No action is required.
Error Message MODULE-2-LCM_UPGRADE_OVER_FAIL: Upgrade over message returned [dec] [hex] for SAP [dec]Explanation Upgrade done message failed.
Recommended Action No action is required.
Error Message MODULE-2-LCM_UPGRADE_READY_FAIL: Upgrade ready message returned [dec] [hex] for SAP [dec]Explanation Upgrade ready message failed.
Recommended Action No action is required.
Error Message MODULE-2-LCM_UPGRADE_READY_GENERAL_FAIL: Upgrade ready message fails SAP [chars]Explanation Upgrade ready message failed.
Recommended Action No action is required.
Error Message MODULE-2-MOD_DIAG_FAIL: Module [dec] (serial: [chars]) reported failure [chars] due to [chars] in device [dec] (device error [hex])Explanation The module in slot [decimal digit] reported a failure in the runtime diagnostic. Module manager is going to power cycle the module.
Recommended Action Collect information about the module by issuing the command 'show module internal all module [decimal digit]'.
Error Message MODULE-2-MOD_DNLD_FAIL: Image download failed for module [dec] (serial: [chars])Explanation Module [decimal digit] failed to download a new image from the supervisor.
Recommended Action Collect information about the module by issuing the command 'show module internal all module [decimal digit]'.
Error Message MODULE-2-MOD_FAIL: Initialization of module [dec] (serial: [chars]) failedExplanation Module [decimal digit] reported a failure during the initialization phase and will be powered down.
Recommended Action Collect information about the module by issuing the commands 'show module_internal all module <module number>'.
Error Message MODULE-2-MOD_MAJORSWFAIL: Module [dec] (serial: [chars]) reported a critical failure in service [chars]Explanation A critical failure in service [string] happened at module [decimal digit] is going to reset the module [decimal digit].
Recommended Action Collect information about the module by issuing the command 'show module internal all module [decimal digit]'.
Error Message MODULE-2-MOD_MINORSWFAIL: Module [dec] (serial: [chars]) reported a failure in service [chars]Explanation A non-critical failure in service [string] happened at module [decimal digit] is not going to reset the module [decimal digit].
Recommended Action Collect information about the module by issuing the command 'show module internal all module [decimal digit]'.
Error Message MODULE-2-MOD_NOT_ALIVE: Module [dec] not responding... resetting (serial: [chars])Explanation Module [decimal digit] is not replying to the hello message: module manager is then going to reset the module.
Recommended Action No action is required.
Error Message MODULE-2-MOD_REGFAILED: Registration failed for module [dec]Explanation Module [decimal digit] sent the registration message notifying a failure.
Recommended Action Collect module internal information by issuing the command 'show module internal all module [decimal digit]'.
Error Message MODULE-2-MOD_SOMEPORTS_FAILED: Module [dec] (serial: [chars]) reported failure on ports [dec]/[dec]-[dec]/[dec] ([chars]) due to [chars] in device [dec] (error [hex])Explanation Module [decimal digit] reported a failure in the runtime diagnostic due to failure in some of the ports.
Recommended Action Collect information about the module by issuing the command 'show module internal all module [decimal digit]'.
Error Message MODULE-2-MOD_UNKNOWN: Module type [[dec]] in slot [dec] is not supportedExplanation The software card id of module [decimal digit] is not supported by the supervisor.
Recommended Action Collect information about the module by issuing the commands 'show module internal all module [decimal digit]'.
Error Message MODULE-2-XBAR_DIAG_FAIL: Xbar [dec] (serial: [chars]) reported failure [chars] due to [chars] in device [dec] (device error [hex])Explanation The xbar in slot [decimal digit] reported a failure in the runtime diagnostic. Module manager is going to power cycle the module.
Recommended Action Collect information about the module by issuing the command 'show module internal all xbar [decimal digit]'.
Error Message MODULE-2-XBAR_FAIL: Initialization of xbar [dec] (serial: [chars]) failedExplanation Xbar [decimal digit] reported a failure during the initialization phase and will be powered down.
Recommended Action Collect information about the module by issuing the commands 'show module_internal all xbar <module number>'.
Error Message MODULE-2-XBAR_SOMEPORTS_FAILED: Xbar [dec] (serial: [chars]) reported failure on ports [dec]/[dec]-[dec]/[dec] ([chars]) due to [chars] in device [dec] (error [hex])Explanation Xbar [decimal digit] reported a failure in the runtime diagnostic due to failure in some of the ports.
Recommended Action Collect information about the module by issuing the command 'show module internal all xbar [decimal digit]'.
Error Message MODULE-2-XBAR_UNKNOWN: Xbar type [[dec]] in slot [dec] is not supportedExplanation The software card id of xbar [decimal digit] is not supported by the supervisor.
Recommended Action Collect information about the module by issuing the commands 'show module internal all xbar [decimal digit]'.
MODULE-3
Error Message MODULE-3-MOD_SRG_NOT_COMPATIBLE: Module [dec] (serial: [chars]) firmware is not compatible with supervisor, downloading new imageExplanation The software version of module [decimal digit] is not supported by the supervisor.
Recommended Action Collect information about the module by issuing the command 'show module internal all module [decimal digit]'.
MODULE-4
Error Message MODULE-4-MOD_WARNING: Module [dec] (serial: [chars]) reported warning [chars] due to [chars] in device [dec] (device error [hex])Explanation Module [decimal digit] reported a warning in the runtime diagnostic due to failure in some of the ports.
Recommended Action Collect information about the module by issuing the command 'show module internal all module [decimal digit]'.
Error Message MODULE-4-XBAR_WARNING: Xbar [dec] (serial: [chars]) reported warnings on ports [dec]/[dec]-[dec]/[dec] ([chars]) due to [chars] in device [dec] (device error [hex])Explanation Xbar [decimal digit] reported a warning in the runtime diagnostic due to failure in some of the ports.
Recommended Action Collect information about the module by issuing the command 'show module internal all xbar [decimal digit]'.
MODULE-5
Error Message MODULE-5-ACTIVE_SUP_OK: Supervisor [dec] is active (serial: [chars])Explanation Module [decimal digit] is ready to be configured and be able to switch traffic.
Recommended Action No action is required.
Error Message MODULE-5-MOD_OK: Module [dec] is online (serial: [chars])Explanation Module [decimal digit] is ready to be configured and be able to switch traffic.
Recommended Action No action is required.
Error Message MODULE-5-MOD_REINIT: Re-initializing module [dec] (serial: [chars])Explanation Module [decimal digit] reported a failure during the initialization phase and will be rebooted.
Recommended Action Collect information about the module by issuing the commands 'show module_internal all module <module number>'.
Error Message MODULE-5-MOD_RESTART: Module [dec] is restarting after image downloadExplanation Module [decimal digit] completed image download and is restarting.
Recommended Action No action is required.
Error Message MODULE-5-MOD_STARTUP_CFG_MISMATCH: The startup configuration cannot be applied to a different module type for module [dec] (serial: [chars]). [chars] module is replacing [chars].Explanation The startup configuration for module [decimal digit] contains information about a different type of module instead of containing information about the current one.
Recommended Action No action is required.
Error Message MODULE-5-STANDBY_SUP_OK: Supervisor [dec] is standbyExplanation Module [decimal digit] is ready to be configured and be able to switch traffic.
Recommended Action No action is required.
Error Message MODULE-5-XBAR_OK: Xbar [dec] is online (serial: [chars])Explanation Xbar [decimal digit] is ready to be configured and be able to switch traffic.
Recommended Action No action is required.
Error Message MODULE-5-XBAR_REINIT: Re-initializing xbar [dec] (serial: [chars])Explanation Xbar [decimal digit] reported a failure during the initialization phase and will be rebooted.
Recommended Action Collect information about the module by issuing the commands 'show module_internal all xbar <module number>'.
MODULE-6
Error Message MODULE-6-MOD_PURGE_CONFIG: Purging the configuration for module [dec]Explanation Notification is being sent to remove the module configurations.
Recommended Action No action is required.
Error Message MODULE-6-MOD_REG_OK: Registration succeeded for module [dec]Explanation Module [decimal digit] sent a successful registration message.
Recommended Action No action is required.
MONITOR Messages
This section contains the MONITOR messages.
MONITOR-6
Error Message MONITOR-6-ETH_SPAN_SESSION_CREATED: Session [dec] createdExplanation A new span session has been created.
Recommended Action No action is required.
Error Message MONITOR-6-ETH_SPAN_SESSION_DELETED: Session [dec] deletedExplanation Session has been deleted.
Recommended Action No action is required.
Error Message MONITOR-6-ETH_SPAN_SESSION_DOWN: Session [dec] is down. Reason [chars]Explanation Session is down, no further traffic will be spanned.
Recommended Action No action is required.
Error Message MONITOR-6-ETH_SPAN_SESSION_ERROR: Session [dec] is having error. Reason [chars]Explanation The session is experiencing a problem.
Recommended Action Delete the session and try to reconfigure it.
Error Message MONITOR-6-ETH_SPAN_SESSION_UP: Session [dec] is up.Explanation Session is up now. You can monitor Spanned traffic at the destination ports.
Recommended Action No action is required.
NFM Messages
This section contains the NFM messages.
NFM-2
Error Message NFM-2-COMMIT_FAIL: Commit failed: client [hex], [chars]Explanation The DDB commit failed.
Recommended Action No action is required.
Error Message NFM-2-DDB_FAILURE: DDB failure: [chars]Explanation A DDB has generated failure.
Recommended Action No action is required.
Error Message NFM-2-EXITING: Exit reason: [chars]Explanation The NFM service process has exited due to [char]. The process has probably been restarted automatically.
Recommended Action No action is required.
Error Message NFM-2-INIT_FAIL: NFM Service Init failed: [chars]Explanation NFM Service initialization failed. [chars] explains the reason for the failure.
Recommended Action No action is required.
Error Message NFM-2-MALLOC_ERROR: Function [chars]: Size [dec] bytesExplanation The NFM service could not allocate enough memory.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NFM-2-PSS_ERROR: [chars]: PSS ret. val=[dec]Explanation The NFM service encountered an error while operating on a persistent storage database.
Recommended Action No action is required.
Error Message NFM-2-VERIFY_FAIL: Verify failed - Client [hex], Reason: [chars], Interface: [chars]Explanation The DDB Verify failed.
Recommended Action No action is required.
NFM-3
Error Message NFM-3-DDB_ERROR: DDB error: [chars]Explanation The DDB has generated an error.
Recommended Action No action is required.
Error Message NFM-3-FEATURE_MANAGER_ERROR: [chars]: An error occurred processing a Feature Manager msg - error [chars]Explanation An error occurred while processing a message from FEATURE Manager.
Recommended Action No action is required.
Error Message NFM-3-HANDLE_IN_USE: [chars]: name: [chars]Explanation The NFM service encountered a handle that was in use while reading a persistent storage database.
Recommended Action No action is required.
Error Message NFM-3-INVALID_HANDLE: [chars]: handle =[hex]Explanation The NFM service encountered an invalid handle in a persistent storage database.
Recommended Action No action is required.
Error Message NFM-3-MONITOR_NOT_FOUND: Monitor with handle [hex] from source [hex]Explanation An Export Msg from a Linecard contained an invalid Monitor handle.
Recommended Action No action is required.
Error Message NFM-3-MTS_ERROR: NFM encountered the following MTS error: [chars]Explanation NFM Service encountered an MTS error. [chars] specifies the context where the error occurred.
Recommended Action No action is required.
Error Message NFM-3-NFM_DDB_ERROR: DDB error: [chars]Explanation The DDB has generated an error.
Recommended Action No action is required.
Error Message NFM-3-PSS_CORRUPTED: [chars] PSS found corruptedExplanation The NFM service has detected a corrupted file in its persistent information databases The database would be recreated.
Recommended Action No action is required.
Error Message NFM-3-VLAN_PARSE_ERROR: [chars]: An error occurred processing a VLAN Mgr Parse msg [hex]Explanation An error occurred while processing a message from VLAN Manager.
Recommended Action No action is required.
NFM-4
Error Message NFM-4-DDB_WARNING: DDB warning: [chars]Explanation The DDB has generated warning.
Recommended Action No action is required.
Error Message NFM-4-LICENSE_EXPIRED: The License has expired.Explanation The NFM service requires a License to run and exits when the License expires.
Recommended Action No action is required.
Error Message NFM-4-NFM_DDB_WARNING: DDB warning: [chars]Explanation The DDB has generated warning.
Recommended Action No action is required.
Error Message NFM-4-PSS_VERSION_MISMATCH: PSS [dec] Code [dec]Explanation There was a version mismatch between the NFM service and one of its persistent storage databases. The persistent information has been translated to the new format.
Recommended Action No action is required.
NFM-5
Error Message NFM-5-FEATURE_DISABLED: NetFlow Disabled.Explanation NetFlow Feature Disabled.
Recommended Action No action is required.
Error Message NFM-5-FEATURE_ENABLED: NetFlow Enabled.Explanation NetFlow Feature Enabled.
Recommended Action No action is required.
NFM-6
Error Message NFM-6-BECAME_ACTIVE: Became ACTIVE from standby modeExplanation The NFM service on the standby supervisor became active and it is ready to serve client requests.
Recommended Action No action is required.
Error Message NFM-6-BECAME_STDBY: Became STANDBY from active modeExplanation The NFM service became standby from active mode.
Recommended Action No action is required.
Error Message NFM-6-DDB_NOTIF: DDB notification: [chars]Explanation The DDB has generated a notification.
Recommended Action No action is required.
Error Message NFM-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system manager: Reason=[chars]Explanation The NFM service was unable to send heartbeats to the system manager.
Recommended Action No action is required.
Error Message NFM-6-NFM_DDB_NOTIF: DDB notification: [chars]Explanation The DDB has generated a notification.
Recommended Action No action is required.
Error Message NFM-6-SERVICE_UP: Initialized [chars]Explanation The NFM service is up and ready The service was initialized in [char] mode.
Recommended Action No action is required.
Error Message NFM-6-SRV_EXIT: NFM Service shutting down gracefullyExplanation NFM Service is shutting down gracefully.
Recommended Action No action is required.
Error Message NFM-6-SWITCH_OVER: Switching Over to other Sup.Explanation The NFM service has successfully switched over to the standby supervisor module.
Recommended Action No action is required.
NFM-7
Error Message NFM-7-DEBUG: [chars]Explanation Debug information is being sent to syslog.
Recommended Action No action is required.
NFP-SLOT# Messages
This section contains the NFP-SLOT# messages.
NFP-SLOT#-2
Error Message NFP-SLOT#-2-NF_ACL_ERR: [chars]([dec]): acl error. [chars]Explanation Acl error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NFP-SLOT#-2-NF_DDB_ERR: [chars]([dec]): ddb error. [chars]Explanation Ddb error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NFP-SLOT#-2-NF_ERR: [chars]([dec]): nfp error. [chars]Explanation Nfp error occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NFP-SLOT#-2-NF_FIB_ERR: [chars]([dec]): fib error. [chars]Explanation Fib error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NFP-SLOT#-2-NF_NDE_ERR: [chars]([dec]): nde error. [chars]Explanation Nde error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NFP-SLOT#-2-NF_NFM_ERR: [chars]([dec]): nfm error. [chars]Explanation Nfm error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NFP-SLOT#-2-NF_QOS_ERR: [chars]([dec]): qos error. [chars]Explanation Qos error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
NPC-SLOT# Messages
This section contains the NPC-SLOT# messages.
NPC-SLOT#-3
Error Message NPC-SLOT#-3-LOG_NPC_ERR: Nonrecoverable error: [chars]Explanation Errors which cause program to exit occurred.
Recommended Action No action is required.
NPC-SLOT#-4
Error Message NPC-SLOT#-4-LOG_NPC_WARNING: Serious error: [chars]Explanation Serious errors which affect all normal operations occurred.
Recommended Action No action is required.
NPC-SLOT#-5
Error Message NPC-SLOT#-5-LOG_NPC_DEBUG: Unexpected error: [chars]Explanation Unexpected errors which affect some normal operations occurred.
Recommended Action No action is required.
Error Message NPC-SLOT#-5-LOG_NPC_NVP_FSM: Illegal event received: [chars]Explanation Illegal event received in NPC_NVP FSM.
Recommended Action No action is required.
Error Message NPC-SLOT#-5-LOG_NPC_VSAN_FSM: Illegal event received: [chars]Explanation Illegal event received in NPC_VSAN FSM.
Recommended Action No action is required.
NPV Messages
This section contains the NPV messages.
NPV-2
Error Message NPV-2-CFS_PEER_LOST_WITHIN_SESSION: CFS peer with switch wwn [chars] was lost in the middle of an active CFS session. Abort the CFS session and re-enter the configuration changesExplanation Due to port flaps, link outages, switch restart etc. a CFS peer switch of NPV was lost. The current configuration changes would not be applied to this peer until the peer merges with this switch. The CFS merge may fail if the configuration at the lost peer conflicts with the changes made in this session. It is recommended that the user abort this CFS session using ivr abort command and then re-enter the configuration changes.
Recommended Action No action is required.
Error Message NPV-2-NPV_DISABLE_FAILED: NPV could not disabled : [chars] [chars]Explanation NPM could not be disabled due to the reason specified. Please try again.
Recommended Action No action is required.
Error Message NPV-2-NPV_ENABLE_FAILED: NPV could not enabled : [chars] [chars]Explanation NPM could not be enabled due to the reason specified. Please try again.
Recommended Action No action is required.
Error Message NPV-2-NPV_EXITED: NPV process exited in file [chars] at Line [chars]:[chars]Explanation NPM process encountered a critical error as specified, and so NPV process cannot continue.
Recommended Action No action is required.
NPV-3
Error Message NPV-3-ACL_UPDATE_FAILED: [chars]Explanation ACL update request initiated by the NPV process has failed.
Recommended Action No action is required.
Error Message NPV-3-CFS_INVALID_PAYLOAD_RECEIVED: NPV received invalid payload from CFSExplanation NPV process received invalid payload from CFS.
Recommended Action No action is required.
Error Message NPV-3-CLEAR_FAILED: [chars]Explanation An error occurred while clearing the lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NPV-3-COMMIT_FAILED: [chars]Explanation An error occurred while committing configuration. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NPV-3-COMMIT_PARTIALLY_FAILED: [chars]Explanation An error occurred while committing configuration. Configuration could not be committed on some switches. The reason for the failure : [chars]. Configuration can be inconsistent in the fabric.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NPV-3-COMMIT_REJECTED: [chars]Explanation Commit request received from remote switch is rejected. The reason for the failure: [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NPV-3-F_RJT_SENT: [chars]Explanation NPV process sent an F_RJT frame.
Recommended Action No action is required.
Error Message NPV-3-FC2_SEND_FAILED: [chars]Explanation NPV process could not send an FC2 message.
Recommended Action No action is required.
Error Message NPV-3-INTERNAL_ERROR: Internal error: [chars]Explanation NPV process encountered a generalerror thatdoes not fall in any of the categories. [chars] describes the error and its context.
Recommended Action No action is required.
Error Message NPV-3-LCP_PROGRAMMING_FAILED: [chars]Explanation LCP programming request initiated by the NPV process has failed.
Recommended Action No action is required.
Error Message NPV-3-LOCK_FAILED: [chars]Explanation An error occurred while acquiring the lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NPV-3-LS_RJT_RCVD: [chars]Explanation NPV process received an LS_RJT frame.
Recommended Action No action is required.
Error Message NPV-3-LS_RJT_SENT: [chars]Explanation NPV process sent an LS_RJT frame.
Recommended Action No action is required.
Error Message NPV-3-MALLOC_FAILED: [chars]Explanation NPV process could not allocate enough memory.
Recommended Action No action is required.
Error Message NPV-3-MERGE_ACTIVATION_FAILED: [chars]Explanation An error occurred while activating merged configuration. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NPV-3-MERGE_FAILED: [chars]Explanation An error occurred while merging configuration. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message NPV-3-MTS_SEND_FAILED: [chars]Explanation NPV process could not send an MTS message.
Recommended Action No action is required.
Error Message NPV-3-NPIV_DISABLE_FAILED: [chars]Explanation NPIV feature could not be disabled.
Recommended Action No action is required.
Error Message NPV-3-NPV_CFS_IPV4_ENABLE_FAILED: CFS IPv4 distribution enable failed because [chars]Explanation NPV CFS distRIBution might not work. Try enabling it again on the command line. Make sure cfs distribution is enabled.
Recommended Action No action is required.
Error Message NPV-3-PORT_BRINGUP_FAILED: [chars]Explanation NPV process has failed to bring up the port.
Recommended Action No action is required.
Error Message NPV-3-PORT_REINIT_FAILED: [chars]Explanation Port reinit request initiated by the NPV process has failed.
Recommended Action No action is required.
Error Message NPV-3-UNEXPECTED_EVENT: [chars]Explanation NPV process has received an unexpected event in the current state.
Recommended Action No action is required.
Error Message NPV-3-UNLOCK_FAILED: [chars]Explanation An error occurred while releasing the lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
NPV-5
Error Message NPV-5-ASSERTION_FAILED: Unexpected assertion failure in File [chars] at Line [dec]Explanation An assertion failed in NPV code.
Recommended Action No action is required.
Error Message NPV-5-FLEXATTACH_VPWWN_AUTO_ASSIGNED: A virtual port WWN [chars] has been automatically assigned to interface [chars]Explanation The virtual port WWN will be used as port WWN for devices logging in on this interface.
Recommended Action No action is required.
Error Message NPV-5-FLEXATTACH_VPWWN_MANUALLY_ASSIGNED: A virtual port WWN [chars] has been manually assigned to interface [chars]Explanation The virtual port WWN will be used as port WWN for devices logging in on this interface.
Recommended Action No action is required.
Error Message NPV-5-FLEXATTACH_VPWWN_UNASSIGNED: The virtual port WWN has been unassigned from interface [chars]Explanation The physical port WWN will be used as port WWN for devices logging in on this interface.
Recommended Action No action is required.
Error Message NPV-5-FRAME_DISCARDED: [chars]Explanation NPV process discarded an FC2 frame.
Recommended Action No action is required.
Error Message NPV-5-NPV_LOAD_BALANCE_REINIT: Server ports reinitialized : [chars]Explanation Server ports are reinitialized to balance the loads on the external interfaces.
Recommended Action No action is required.
NPV-6
Error Message NPV-6-ABTS_SENT: [chars]Explanation NPV process sent an ABTS frame.
Recommended Action No action is required.
Error Message NPV-6-ELS_CMD_SENT_TO_CORE: [chars]Explanation NPV process sent an ELS frame to the core switch.
Recommended Action No action is required.
Error Message NPV-6-ELS_CMD_SENT_TO_SRV: [chars]Explanation NPV process sent an ELS frame to the server.
Recommended Action No action is required.
Error Message NPV-6-EXT_IF_SELECTED: [chars]Explanation NPV process has selected an external interface to forward either all frames received on a server interface or frames received from a specific port WWN.
Recommended Action No action is required.
Error Message NPV-6-FABRIC_PROXY_LOGO_SENT: [chars]Explanation NPV process sent a LOGO frame to the device as the corresponding external interface went down.
Recommended Action No action is required.
Error Message NPV-6-FDISC_RCVD: [chars]Explanation NPV process received an FDISC frame.
Recommended Action No action is required.
Error Message NPV-6-FDISC_SENT: [chars]Explanation NPV process sent an FDISC frame to the core switch.
Recommended Action No action is required.
Error Message NPV-6-FLOGI_RCVD: [chars]Explanation NPV process received an FLOGI frame.
Recommended Action No action is required.
Error Message NPV-6-INTERNAL_FLOGI_SENT: [chars]Explanation NPV process sent an internal FLOGI frame to the core switch on an external interface.
Recommended Action No action is required.
Error Message NPV-6-LOGO_RCVD: [chars]Explanation NPV process received a LOGO frame.
Recommended Action No action is required.
Error Message NPV-6-LOGO_SENT: [chars]Explanation NPV process sent a LOGO frame.
Recommended Action No action is required.
Error Message NPV-6-LS_ACC_RCVD: [chars]Explanation NPV process received an LS_ACC frame.
Recommended Action No action is required.
Error Message NPV-6-LS_ACC_SENT: [chars]Explanation NPV process sent an LS_ACC frame.
Recommended Action No action is required.
Error Message NPV-6-MTS_NOTIF_RCVD: [chars]Explanation NPV process received an MTS notification.
Recommended Action No action is required.
Error Message NPV-6-MTS_NOTIF_SENT: [chars]Explanation NPV process sent an MTS notification.
Recommended Action No action is required.
Error Message NPV-6-MTS_REQ_RCVD: [chars]Explanation NPV process received an MTS request.
Recommended Action No action is required.
Error Message NPV-6-MTS_REQ_SENT: [chars]Explanation NPV process sent an MTS request.
Recommended Action No action is required.
Error Message NPV-6-MTS_RESP_RCVD: [chars]Explanation NPV process received an MTS response.
Recommended Action No action is required.
Error Message NPV-6-MTS_RESP_SENT: [chars]Explanation NPV process sent an MTS response.
Recommended Action No action is required.
Error Message NPV-6-NPIV_DISABLED: [chars]Explanation NPIV feature has been disabled.
Recommended Action No action is required.
Error Message NPV-6-NPIV_ENABLED: [chars]Explanation NPIV feature has been enabled.
Recommended Action No action is required.
Error Message NPV-6-NPV_ENABLE_DISABLE_IN_PROGRESS: [chars]Explanation NPV feature enable/disable is in progress. This sylog is printed at the beginning of various significannot phases.
Recommended Action No action is required.
Error Message NPV-6-NPV_LOAD_BALANCE_TIMER_START: (Re)starting automatic load balancing timer for [dec] secondsExplanation Timer started for upon external interface up or server interface down. When the timer goes off some of the server interfaces may be reinitialized to evenly distRIBute the server interfaces among the eligible external interfaces.
Recommended Action No action is required.
Error Message NPV-6-SERVER_PROXY_LOGO_SENT: [chars]Explanation NPV process sent a LOGO frame to the core switch as the server interface went down.
Recommended Action No action is required.
NPV-7
Error Message NPV-7-CFS_REQ_RCVD: [chars]Explanation CFS request is received. The WWN of the switch originated this request and the rr-token of the request are provided in the syslog message.
Recommended Action No action is required.
Error Message NPV-7-CFS_RESP_SENT: [chars]Explanation CFS response is sent. The rr-token of the corresponding request and the status are provided in the syslog message.
Recommended Action No action is required.
NTP Messages
This section contains the NTP messages.
NTP-2
Error Message NTP-2-NTP_SYSLOG_CRIT_ERR: : [chars]Explanation NTP syslog Critial Error : [chars].
Recommended Action No action is required.
Error Message NTP-2-NTP_SYSLOG_INIT_FAIL: : [chars] [chars]Explanation NTP Initialization Failed: [chars] [chars].
Recommended Action No action is required.
Error Message NTP-2-NTP_SYSLOG_NO_RESP_FROM_LC: from LC[dec] for [chars]Explanation NTP did not receive response from the line card for the request sent.
Recommended Action No action is required.
NTP-3
Error Message NTP-3-NTP_SYSLOG_ALLOC_FAIL: : [chars]Explanation NTP syslog allocation failed : [chars].
Recommended Action No action is required.
Error Message NTP-3-NTP_SYSLOG_ERR: : [chars]Explanation NTP syslog Error : [chars].
Recommended Action No action is required.
Error Message NTP-3-NTP_SYSLOG_ERR_EXT: : [chars] [chars]Explanation NTP syslog Error Exit : [chars] [dec].
Recommended Action No action is required.
Error Message NTP-3-NTP_SYSLOG_MTS_ERR: : [chars]Explanation NTP MTS Error : [chars].
Recommended Action No action is required.
NTP-6
Error Message NTP-6-NTP_SYSLOG_CREATED: : [chars]; Slot No: [dec]Explanation NTP syslog created : [chars] [chars].
Recommended Action No action is required.
Error Message NTP-6-NTP_SYSLOG_EXIT: : [chars]Explanation NTP syslog Exit : [chars].
Recommended Action No action is required.
Error Message NTP-6-NTP_SYSLOG_WARN: : [chars]Explanation NTP syslog Warning : [chars].
Recommended Action No action is required.
NVP Messages
This section contains the NVP messages.
NVP-6
Error Message NVP-6-NVP_INFO: [chars]Explanation NVP daemon informational message.
Recommended Action No action is required.
Error Message NVP-6-STARTING: deamon startedExplanation The NVP daemon successfully started.
Recommended Action No action is required.
NVP-SLOT# Messages
This section contains the NVP-SLOT# messages.
NVP-SLOT#-2
Error Message NVP-SLOT#-2-CPP_CATASTROPHIC_ERROR: ERROR: Component ([chars]) caused critical error please reboot SSMExplanation Component caused critical error.
Recommended Action Restart the line card.
OC_USD Messages
This section contains the OC_USD messages.
OC_USD-2
Error Message OC_USD-2-RF_CRC: [chars]Explanation Octopus received packets with CRC error from fabric.
Recommended Action No action is required.
ORI_MAC Messages
This section contains the ORI_MAC messages.
ORI_MAC-6
Error Message ORI_MAC-6-ORI_MAC_DEBUG_MSG: [chars]Explanation Debug log message.
Recommended Action No action is required.
OTM Messages
This section contains the OTM messages.
OTM-2
Error Message OTM-2-OTM_EEM_FAIL: OTM failed to register with EEMExplanation OTM process failed to register with eem, exiting now.
Recommended Action No action is required.
OTM-3
Error Message OTM-3-OTM_ERROR: [chars] [chars]Explanation [chars1][chars2].
Recommended Action No action is required.
OTM-5
Error Message OTM-5-OTM_OBJECT_STATUS: Status of tracking object [dec] changed to [chars]Explanation Status of tracking object [dec] changed to [chars].
Recommended Action No action is required.
OTM-6
Error Message OTM-6-OTM_EXITED: OTM process exitedExplanation OTM process is terminated.
Recommended Action No action is required.
Error Message OTM-6-OTM_OBJ_ADD: : Tracking object [dec] configured, status of the object [chars]Explanation Tracking Object [dec] configured, status of the object [chars].
Recommended Action No action is required.
Error Message OTM-6-OTM_OBJ_REM: : Tracking object [dec] removedExplanation Tracking Object [dec] removed.
Recommended Action No action is required.
Error Message OTM-6-OTM_STARTED: OTM process startedExplanation OTM process is up and running.
Recommended Action No action is required.
Error Message OTM-6-OTM_TRACK_START: Client started tracking object [dec]Explanation Client has started tracking object [dec].
Recommended Action No action is required.
Error Message OTM-6-OTM_TRACK_STOP: Client stopped tracking object [dec]Explanation Client has stopped tracking object [dec].
Recommended Action No action is required.
PHY_USD-SLOT# Messages
This section contains the PHY_USD-SLOT# messages.
PHY_USD-SLOT#-4
Error Message PHY_USD-SLOT#-4-LOG_PHY_ISSU_LINK_ST_CHNG: Port [dec]: link state during ISSUExplanation Port Link status changed while perfoming an In Service The system Upgrade. Disabling the port.
Recommended Action No action is required.
PIXM Messages
This section contains the PIXM messages.
PIXM-2
Error Message PIXM-2-PIXM_CRIT: [chars]Explanation PIXM or other application had critical error.
Recommended Action No action is required.
PIXM-3
Error Message PIXM-3-PIXM_ERR: [chars]Explanation PIXM or other application had some error.
Recommended Action No action is required.
Error Message PIXM-3-PIXM_FAILURE: PIXM / PIXMC ERROR, [chars]Explanation PIXMC or other application did not respond with a time limit or something bad happened.
Recommended Action No action is required.
Error Message PIXM-3-PIXM_SYSLOG_UPGRADE_OVER: [chars]Explanation PIXM received UPGRADE_OVER before receiving UPGRADE_READY for slot:[dec].
Recommended Action No action is required.
PIXM-4
Error Message PIXM-4-PIXM_SEND_FAILURE: PIXM SEND FAILURE, [chars]Explanation PIXM was not able to send to PIXMC or other application.
Recommended Action No action is required.
Error Message PIXM-4-PIXM_VDC_CLEANUP: VDC Cleanup, [chars]Explanation Application like PC, MD, Mcast should have cleaned up the LTL for VDC Graceful cleanup.
Recommended Action No action is required.
Error Message PIXM-4-PIXM_WARN: [chars]Explanation PIXM or other application had some mior issues.
Recommended Action No action is required.
PLATFORM Messages
This section contains the PLATFORM messages.
PLATFORM-0
Error Message PLATFORM-0-CHASSIS_CLKSW_MODULE_RESET: Modules reset due to clock switchExplanation Chassis clock source has switched and all Vegas line cards will be reset. The system will automatically continue using redundant clock module.
Recommended Action Refer to the platform document on clock modules.
Error Message PLATFORM-0-CHASSIS_CLKSWITCH: Hardware clock switched to redundant clock-[dec]Explanation Clock module on chassis deteted a failure and switched to redundant clock module.
Recommended Action Enter the 'show platform internal informationcommand' to collect more information.
Error Message PLATFORM-0-CHASSIS_CLKSWRESET: Switch reset due to clock switchExplanation Chassis clock source has failed and system will be reset. The system will automatically start using redundant clock module.
Recommended Action Refer to the platform document on clock modules.
Error Message PLATFORM-0-FAIL_REMOVED: Fan module removed. Fan[dec] has been absent for [dec] secondsExplanation Fan module is removed. This could lead to temperature alarms.
Recommended Action Replace the fan module as soon as possible.
Error Message PLATFORM-0-MOD_TEMPMAJALRM: [chars] reported Major temperature alarm. Sensor=[dec] Temperature=[dec] MajThreshold=[dec]Explanation Module in slot [decimal digit] exceeded major temperature threshold.
Recommended Action Enter a 'show env temperature' to collect more information.
Error Message PLATFORM-0-MOD_TEMPSHUTDOWN: [chars] powered down due to major temperature alarm for Sensor [dec].Explanation Module in slot [decimal digit] shutdown due to temperature exceeding major threshold.
Recommended Action Enter a 'show env temperature' to collect more information.
Error Message PLATFORM-0-PFM_EMERGENCY: [chars]Explanation Platform Emergency.
Recommended Action No action is required.
Error Message PLATFORM-0-SUP_SPROM_ERROR: Unable to read SPROM for Sup in slot [dec]Explanation The supervisor in slot [decimal digit] was not able to read its SPROM.
Recommended Action No action is required.
Error Message PLATFORM-0-SUP_WRONGSLOTNUM: Supervisor powered up in WRONG SLOT:[dec] (Serial number [chars])Explanation The supervisor is comming up in wrong slot [decimal digit].
Recommended Action No action is required.
Error Message PLATFORM-0-SYS_LC_DRIVER_LOAD_FAILED: Failed to load linecard module driversExplanation Failed to load drivers.
Recommended Action Image is possibly corrupt. Try to load a different image.
Error Message PLATFORM-0-SYS_RESET: [chars] System shutdown in [dec] secondsExplanation The system shutdown in [decimal digit] seconds.
Recommended Action Enter a 'show env temperature' to collect more information.
Error Message PLATFORM-0-SYS_SHUTDOWN: System shutdown in [dec] seconds due to major temperature alarmExplanation The system shutdown in [decimal digit] seconds due to temperature exceeding major threshold.
Recommended Action Enter a 'show env temperature' to collect more information.
Error Message PLATFORM-0-SYS_SHUTDOWN_FAN_REMOVAL: System shutdown in [dec] seconds due to fan removalExplanation The system shutdown in [decimal digit] seconds due to removal of fan module.
Recommended Action Enter a 'show env fan' to collect more information.
Error Message PLATFORM-0-SYS_SHUTDOWN_MDS9124_FAN_FAIL: System shutdown in [dec] seconds due to less than 4 fans operating.Explanation The system shutdown in [decimal digit] seconds due to less than 4 fans operating.
Recommended Action Enter a 'show env fan' to collect more information.
Error Message PLATFORM-0-SYS_SUP_DRIVER_LOAD_FAILED: Failed to load supervisor module driversExplanation Failed to load drivers.
Recommended Action Image is possibly corrupt. Try to load a different image.
Error Message PLATFORM-0-XBAR_CARD_CLK_FAIL: Xbar card in slot:[dec] (Serial number [chars]) encountered clock failureExplanation The xbar in slot [decimal digit] encountered clock failure.
Recommended Action No action is required.
Error Message PLATFORM-0-XBAR_CARD_INCOMPAT_CHASSIS: Xbar card in slot:[dec] (Part number [chars]) Incompatible with backplane chassis Part Num:[chars]Explanation The xbar in slot [decimal digit] is incompatible with backplane chassis.
Recommended Action No action is required.
Error Message PLATFORM-0-XBAR_WRONGSLOTNUM: Xbar powered up in WRONG SLOT:[dec] (Serial number [chars])Explanation The xbar in slot [decimal digit] powered up in wrong slot.
Recommended Action No action is required.
PLATFORM-1
Error Message PLATFORM-1-FABRIC_SWITCH_FAN_FAIL: Less than 4 required fans operating.Explanation Fan module has failed leaving less than 4 total fans operating. Fan needs to be replaced. This can lead to overheating and temperature alarms.
Recommended Action Enter the 'show platform internal informationcommand' to collect more information.
Error Message PLATFORM-1-FAN_FAIL: Fan module FailedExplanation Fan module has failed and needs to be replaced. This can lead to overheating and temperature alarms.
Recommended Action Enter the 'show platform internal informationcommand' to collect more information.
Error Message PLATFORM-1-PFM_ALERT: [chars]Explanation Platform Alert.
Recommended Action No action is required.
Error Message PLATFORM-1-XBAR_PWRDENY: Xbar [dec] can not be powered up due to insufficient power (Serial number [chars])Explanation Available power in power supplies is not sufficient to power up the xbar.
Recommended Action You can verify available power and current usage using command 'show env power'. Refer to power supply document on how to increase power supply capacity.
PLATFORM-2
Error Message PLATFORM-2-9134_FAN_FAIL: Fan module [dec] FailedExplanation Fan module has failed and needs to be replaced. This can lead to overheating and temperature alarms.
Recommended Action Enter the 'show platform internal informationcommand' to collect more information.
Error Message PLATFORM-2-9134_FAN_OK: Fan module [dec] okExplanation Fan module is ok.
Recommended Action No action is required.
Error Message PLATFORM-2-CASA_FAN_FAIL: Fan module [dec] FailedExplanation Fan module has failed and needs to be replaced. This can lead to overheating and temperature alarms.
Recommended Action Enter the 'show platform internal informationcommand' to collect more information.
Error Message PLATFORM-2-CASA_FAN_OK: Fan module [dec] okExplanation Fan module is ok.
Recommended Action No action is required.
Error Message PLATFORM-2-CHASSIS_CLKMODFAULTY: Chassis clock module [dec] faultyExplanation Clock module on chassis is faulty or has been removed.
Recommended Action Enter the 'show platform internal informationcommand' to collect more information.
Error Message PLATFORM-2-CHASSIS_CLKMODOK: Chassis clock module [dec] okExplanation Clock module on chassis is functioning properly.
Recommended Action No action is required.
Error Message PLATFORM-2-CHASSIS_CLKSRC: Current chassis clock source is clock-[dec]Explanation The current chassis clock source is [decimal digit].
Recommended Action No action is required.
Error Message PLATFORM-2-FAN_OK: Fan module okExplanation Fan module is ok.
Recommended Action No action is required.
Error Message PLATFORM-2-FAN_REMOVED: Fan module [dec] (Serial number [chars]) [chars] removedExplanation Fan module is removed.
Recommended Action No action is required.
Error Message PLATFORM-2-FANLET_FAN_FAIL: Failed Fanlets for Fan [dec] ([chars] fan) : [chars]Explanation The specified fanlets have failed. This can lead to overheating and temperature alarms.
Recommended Action Enter the 'show platform internal informationcommand' to collect more information.
Error Message PLATFORM-2-FANMOD_FAN_FAIL: Fan module [dec] ([chars] fan) Failed/RemovedExplanation Fan module has failed and needs to be replaced. This can lead to overheating and temperature alarms.
Recommended Action Enter the 'show platform internal informationcommand' to collect more information.
Error Message PLATFORM-2-FANMOD_FAN_OK: Fan module [dec] ([chars] fan) okExplanation Fan module is ok.
Recommended Action No action is required.
Error Message PLATFORM-2-MEMORY_ALERT: Memory Status Alert : [chars]Explanation Memory alert event received.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message PLATFORM-2-MOD_ALL_PWRDN_NOXBAR: All modules powered down due to non-availability of xbar modulesExplanation All modules in switch are powered down because all xbar modules are offline.
Recommended Action Enter a 'show module', 'show