Feedback
Table Of Contents
Symbols - A - B - D - E - I - L - M - O - P - R - S - T -
Index
Symbols
(*, G)
description 1-4
state creation 3-3
static groups 2-6
static groups on the OIF 2-6
(S, G)
description 1-3
IGMPv3 snooping 4-3
state creation 3-3
static groups 2-6
static groups on the OIF 2-6
A
Anycast-RP
configuring an Anycast-RP set 3-21
description 3-6
MSDP (Note) 5-2
Any Source Multicast. See ASM mode
ASM mode
configuring 3-15
configuring shared trees only 3-23
description 3-2
join-prune messages 3-3
autonomous systems
MSDP 5-2
Auto-RP
candidate RP configuration steps 3-20
candidate RPs, configuring 3-19
configuring 3-19
description 3-5
mapping agent configuration steps 3-20
mapping agents
configuring 3-19
configuring route maps 3-28
RP-Announce messages 3-5
RP-Discovery messages 3-5
B
BGP
autonomous systems
MSDP 5-2
MSDP 5-2
BSRs
candidate BSR configuration steps 3-17
candidate BSRs
configuring 3-16
description 3-4
candidate RP configuration steps 3-17
candidate-RP messages
description 3-4
candidate RPs, configuring 3-17
configuring 3-16
description 3-4
messages
description 3-4
enabling listen and forward 3-5
route maps, configuring 3-28
RP configuration steps 3-17
D
documentation
related documents i-xiii
DRs
description 3-7
PIM domains 1-6
priority and PIM hello message 3-2
SSM mode 3-25
E
ECMP 3-2
equal-cost multipathing 3-2
I
IGMP
all-hosts multicast group 2-2
configuration, example 2-14
description 2-1
enabling 2-1
IGMPv3
changes from IGMPv2 2-2
description 2-3
SSM 2-3
licensing requirements 2-4
parameters
configuring 2-5
default settings 2-5
PIM domains 1-6
queriers
description 2-3
designated 2-2
TTL 2-3
version, default (IGMPv2) 2-2
versions, description 2-2
IGMP commands
hardware profile multicast prefer-source-tree 3-25
iip igmp enforce-router-alert 2-13
ip igmp access-group 2-10
ip igmp flush-routes 2-13
ip igmp group-timeout 2-10
ip igmp immediate-leave 2-10
ip igmp join-group 2-9
ip igmp last-member-query-count 2-10
ip igmp last-member-query-response-time 2-10
ip igmp querier-timeout 2-9
ip igmp query-interval 2-10
ip igmp query-max-response-time 2-10
ip igmp query-timeout 2-9
ip igmp report-link-local-groups 2-10
ip igmp report-policy 2-10
ip igmp robustness-variable 2-9
ip igmp ssm-translate 2-12
ip igmp startup-query-count 2-9
ip igmp startup-query-interval 2-9
ip igmp static-oif 2-9
ip igmp version 2-8
IGMP configuration
access groups 2-7
example 2-14
group membership timeout 2-2, 2-7
immediate leave 2-7
last member query count 2-7
last member query response interval 2-7
member query response interval 2-4
number of query messages 2-3
parameters 2-5
parameters, default settings 2-5
querier timeout 2-6
query interval 2-7
query maximum response time 2-3
query max response time 2-6
report link local multicast groups 2-7
report policy 2-7
reports for link local addresses 2-4
startup query count 2-6
startup query interval 2-6
static multicast groups 2-6
Static multicast groups on OIF 2-6
version 2-6
IGMP membership reports
IGMPv3 suppression 2-3
initiating receipt of multicast data 2-2
SSM translation 2-11
suppressing 2-3
IGMP queriers
description 2-3
designated 2-2
TTL 2-3
IGMP show commands
show ip igmp groups 2-13
show ip igmp interface 2-13
show ip igmp local-groups 2-13
show ip igmp route 2-13
show running-configuration igmp 2-13
show startup-configuration igmp 2-13
IGMP snooping
configuration, example 4-8
description 4-1
licensing requirements 4-4
membership report suppression 4-2
parameters, configuring 4-5
parameters, default settings 4-4
prerequisites 4-4
proprietary features 4-2
querier, description 4-3
statistics 4-8
switch example 4-1
vPC statistics 4-8
IGMP snooping commands
ip igmp snooping 4-6
ip igmp snooping explicit-tracking 4-6
ip igmp snooping fast-leave 4-6
ip igmp snooping last-member-query-interval 4-6
ip igmp snooping link-local-groups-suppression 4-7
ip igmp snooping mrouter interface 4-7
ip igmp snooping querier 4-7
ip igmp snooping report-suppression 4-7
ip igmp snooping static-group 4-7
ip igmp snooping v3-report-suppression 4-7
IGMP snooping configuration
enabling 4-5
example 4-8
explicit tracking 4-5
fast leave 4-5
IGMPv3 report suppression 4-5
last member query interval 4-5
Link-local groups suppression 4-5
multicast routers 4-5
parameters
configuring 4-5
default settings 4-4
report suppression 4-5
snooping querier 4-5
static groups 4-5
IGMP snooping show commands
show ip igmp snooping 4-7
show ip igmp snooping explicit-tracking 4-8
show ip igmp snooping groups 4-7
show ip igmp snooping mroute 4-8
show ip igmp snooping querier 4-8
IGMPv3
changes from IGMPv2 2-2
description 2-3
SSM 2-3
interdomain multicast protocols
MSDP 1-8
SSM 1-8
Internet Group Management Protocol. See IGMP
L
licensing requirements, multicast 1-9
M
MFIB
description 1-9
flushing routes 3-32
MRIB and M6RIB
description 1-8
flushing routes 3-32
MSDP
Anycast-RP (Note) 5-2
configuration, example 5-16
description 5-1
full mesh, description 5-2
interdomain multicast protocol 1-8
licensing requirements 5-3
mesh groups, description 5-3
parameters, default settings 5-4
peering, steps to configure 5-4
peer-RPF flooding, description 5-3
peers, description 5-1
prerequisites 5-4
SA cache, description 5-3
SA messages, and PIM register messages 5-3
SA messages, description 5-1, 5-2
statistics
clearing 5-15
displaying 5-15
MSDP commands
feature msdp 5-6
ip msdp description 5-9
ip msdp flush-routes 5-14
ip msdp group-limit 5-11
ip msdp mesh-group 5-13
ip msdp originator-id 5-11
ip msdp password 5-9
ip msdp peer 5-7
ip msdp sa-interval 5-11
ip msdp sa-limit 5-9
ip msdp sa-policy 5-9
ip msdp shutdown 5-9
MSDP configuration
administrative shutdown 5-8
commands, cached (Note) 5-5
description field 5-8
enabling 5-5
example 5-16
group limit 5-10
MD5 password 5-8
mesh groups 5-12
originator interface name 5-10
parameters, default settings
peering, steps to configure 5-4
peers and peering relationship 5-6
restarting the MSDP process 5-13
SA messages
interval 5-10
limit 5-8
policy IN 5-8
policy OUT 5-8
MSDP show commands
show ip msdp 5-15
show ip msdp count 5-14
show ip msdp mesh-group 5-14
show ip msdp peer 5-14
show ip msdp policy statistics sa-policy 5-15
show ip msdp route 5-15
show ip msdp rpf 5-14
show ip msdp sa-cache 5-15
show ip msdp sources 5-14
show ip msdp summary 5-14
MSDP statistics commands
clear ip msdp peer 5-16
clear ip msdp policy statistics sa-policy 5-16
clear ip msdp route 5-16
clear ip msdp sa-cache 5-16
clear ip msdp statistics 5-16
multicast
administratively scoped IP, description 3-7
channel 1-1
description 1-1
distribution modes
ASM 3-2
SSM 3-2
forwarding 1-4
group 1-1
interdomain protocols
MSDP 1-8
SSM 1-8
IPv4 addresses 1-1
licensing requirements 1-9
protocols
IGMP 2-1
IGMP snooping 4-1
MSDP 5-1
PIM 1-5
restarting processes
MSDP 5-13
multicast distribution trees
description 1-2
PIM 1-5
SPTs, description 1-2
Multicast Forwarding Information Base. See MFIB
Multicast Routing Information Base. See MRIB
multicast routing table (MRT)
limit 3-24
Multicast Source Discovery Protocol. See MSDP
O
OIF
RPF check 1-4
P
PIM
configuration steps 3-10
configuring, description 3-9
dense mode 1-5
enabling 3-2
failure detection 3-3
guidelines and limitations 3-8
licensing requirements 3-8
message filtering 3-29
parameters, default settings 3-9
refreshing state 3-3
statistics
clearing 3-34
displaying 3-34
PIM commands
feature pim 3-11
ip mroute 3-27
ip pim anycast-rp 3-22
ip pim auto-rp listen 3-13
ip pim auto-rp mapping-agent 3-20
ip pim auto-rp mapping-agent-policy 3-31
ip pim auto-rp rp-candidate 3-21
ip pim auto-rp rp-candidate-policy 3-31
ip pim border 3-15
ip pim bsr bsr-policy 3-31
ip pim bsr-candidate 3-18
ip pim bsr listen 3-13
ip pim bsr rp-candidate-policy 3-31
ip pim dr-priority 3-14
ip pim flush-routes 3-32
ip pim hello-authentication ah-md5 3-14
ip pim hello-interval 3-14
ip pim jp-policy 3-31
ip pim log-neighbor-changes 3-30
ip pim neighbor-policy 3-15
ip pim register-policy 3-31
ip pim register-rate-limit 3-14
ip pim rp-address 3-16
ip pim rp-candidate 3-18
ip pim send-rp-announce 3-21
ip pim send-rp-discovery 3-20
ip pim sparse-mode 3-14
ip pim ssm range 3-26
ip pim use-shared-tree-only 3-23
ip routing multicast holddown 3-14
PIM configuration
Auto-RP candidate RP policy (PIM only) 3-29
Auto-RP mapping agent policy (PIM only) 3-29
Auto-RP message action (PIM only) 3-11
BSR candidate RP policy 3-29
BSR message action 3-11
BSR policy 3-29
description 3-9
designated router priority 3-12
domain border 3-12
examples
ASM mode using BSR 3-35
ASM mode using PIM Anycast-RP 3-36
SSM mode 3-35
feature, enabling 3-10
flushing routes 3-32
hello authentication mode 3-12
hello interval 3-12
Initial holddown period 3-12
join-prune policy 3-30
logging neighbor changes 3-29
neighbor policy 3-12
parameters, default settings 3-9
PIM register policy 3-29
Register rate limit 3-11
sparse mode, enabling 3-12
sparse mode parameters 3-11
steps to configure 3-10
PIM domains
border parameter 3-7
description
PIM 1-6
MSDP (PIM) 5-1
PIM messages
Anycast-RP 3-6
authenticating hello with MD5 hash value 3-3
DR priority 3-2
filtering join-prune 3-3
hello, description 3-2
join and state creation 3-3, 3-4
join-prune, description 3-3
join-prune and join or prune (Note) 3-3
MSDP SA messages 5-3
register
description 3-7
filtering 3-7
MSDP 5-1
PIM show commands
show ip mroute 3-33
show ip pim group-range 3-33
show ip pim interface 3-33
show ip pim neighbor 3-33
show ip pim oif-list 3-33
show ip pim policy statistics 3-34
show ip pim route 3-33
show ip pim rp 3-33
show ip pim rp-hash 3-33
show ip pim vrf 3-33
show running-configuration pim 3-33
show startup-configuration pim 3-33
PIM statistics commands
clear ip pim interface statistics 3-34
clear ip pim policy statistics 3-34
clear ip pim statistics 3-34
Protocol Independent Multicast. See PIM 1-5
R
restarting multicast processes
MSDP 5-13
reverse path forwarding. See RPF
route maps
Auto-RP mapping agent configuration 3-28
BSR configuration 3-28
RP configuraion 3-28
RP-Announce messages, and Auto-RP 3-5
RP-Discovery messages, and Auto-RP 3-5
RPF
check 1-4
configuring routes 3-27
PIM 1-5
static multicast 1-7
RPs
address selection 3-4
Anycast-RP, description 3-6
Auto-RP, description 3-5
BSRs, description 3-4
default mode (ASM) 1-7
description 3-4
MSDP 5-1
PIM domains 1-6
route maps, configuring 3-28
selection process 3-5
static, description 3-4
static addresses, configuring 3-15
RP trees. See multicast distribution trees, shared
RPTs. See multicast distribution trees, shared
S
SPTs
description 1-2
SSM mode 3-3
SSM mapping. See SSM translation
SSM mode
configuring 3-25
DRs 3-25
group range, configuring 3-26
IGMPv3 2-3
interdomain multicast protocol 1-8
join-prune messages 3-3
SSM translation
description 2-11
IGMPv1 and IGMPv2 2-3
T
troubleshooting 4-1