Contents

Verifying the Port Profile Configuration

This chapter contains the following sections:

Verifying the Port Profile Configuration
Feature History for Port Profile Verification

Verifying the Port Profile Configuration

Use one of the following commands to verify the configuration:

show port-profile [brief | expand-interface | usage] [name profile-name]
show port-profile-role [name port-profile-role-name]
show running-config port-profile [profile-name]
show port-profile-role users
show port-profile sync-status [interface if-name]
show port-profile virtual usage [name profile-name]
show running-config port-profile [prof-name]

For detailed information about the command output, see the Cisco Nexus 1000V Command Reference.

show port profile

switch# show port-profile
port-profile UpLinkProfile1
  description:
  type: vethernet
  status: disabled
  capability l3control: no
  pinning control-vlan: -
  pinning packet-vlan: -
  system vlans: none
  port-group:
  max ports: 32
  inherit:
  config attributes:
    channel-group auto mode on mac-pinning
  evaluated config attributes:
    channel-group auto mode on mac-pinning
  assigned interfaces:
port-profile UpLinkProfile2
  description:
  type: vethernet
  status: disabled
  capability l3control: no
  pinning control-vlan: -
  pinning packet-vlan: -
  system vlans: none
  port-group:
  max ports: 32
  inherit:
  config attributes:
    channel-group auto mode on sub-group cdp
  evaluated config attributes:
    channel-group auto mode on sub-group cdp
  assigned interfaces:
port-profile UpLinkProfile3
  description:
  type: vethernet
  status: disabled
  capability l3control: no
  pinning control-vlan: -
  pinning packet-vlan: -
  system vlans: none
  port-group:
  max ports: 32
  inherit:
  config attributes:
    channel-group auto mode on sub-group manual
  evaluated config attributes:
    channel-group auto mode on sub-group manual
  assigned interfaces:
switch#

show port-profile name UpLinkProfile

switch# show port-profile name UpLinkProfile3
port-profile UpLinkProfile3
  description:
  type: vethernet
  status: disabled
  capability l3control: no
  pinning control-vlan: -
  pinning packet-vlan: -
  system vlans: none
  port-group:
  max ports: 32
  inherit:
  config attributes:
    channel-group auto mode on sub-group manual
  evaluated config attributes:
    channel-group auto mode on sub-group manual
  assigned interfaces:
switch#

show port-profile brief

switch# show port-profile brief
--------------------------------------------------------------------------------
Port                                    Profile  Remote Conf  Eval  Child Child
Profile                                 State    Mgmt   Items Items Intfs Profs
--------------------------------------------------------------------------------
UplinkProfile1                          enabled  vmware     3     3     1     0
UplinkProfile2                          enabled  vmware     3     3     2     0
Ubuntu-Profile                          enabled  vmware     3     3     1     0
switch#

show port-profile virtual usage

switch# show port-profile virtual usage
-------------------------------------------------------------------------------
Port Profile               Port        Adapter        Owner
-------------------------------------------------------------------------------
n1kv-uplink0               Po1
                           Eth3/2      vmnic1         localhost.
                           Eth3/3      vmnic2         localhost.
vlan1767                   Veth7       Net Adapter 1  all-tool-7
                           Veth8       Net Adapter 1  all-tool-8
aipc1765                   Veth4       Net Adapter 1  bl-h-s
inband1766                 Veth6       Net Adapter 3  bl-h-s
mgmt1764                   Veth5       Net Adapter 2  bl-h-s
vpc-mac-uplink             Po7
                           Eth5/2      vmnic1         localhost.
                           Eth5/3      vmnic2         localhost.
ch-vpc-mac-uplink          Po2
                           Po3
                           Eth4/2      vmnic1         VDANIKLNCOS
                           Eth4/3      vmnic2         VDANIKLNCOS
ch-aipc1765                Veth1       Net Adapter 1  bl-h-p
ch-mgmt1764                Veth2       Net Adapter 2  bl-h-p
ch-inband1766              Veth3       Net Adapter 3  bl-h-p
switch#

show port-profile expand-interface name UplinkProfile1

switch# show port-profile expand-interface name UplinkProfile1
port-profile UplinkProfile1
Ethernet2/2
    switchport mode trunk
    switchport trunk allowed vlan 110-119
    no shutdown
switch#

show port-profile expand-interface

switch# show port-profile expand-interface
port-profile UplinkProfile1
Ethernet2/2
    switchport mode trunk
    switchport trunk allowed vlan 110-119
    no shutdown

port-profile UplinkProfile2
Ethernet2/3
    switchport mode trunk
    switchport trunk allowed vlan 117
    no shutdown
Ethernet2/4
    switchport mode trunk
    switchport trunk allowed vlan 117
    no shutdown

port-profile Ubuntu-Profile
Vethernet439
    switchport mode access
    switchport access vlan 118
    no shutdown
switch#

show port-profile sync-status

switch# show port-profile sync-status interface ethernet 3/2
Ethernet3/2
 port-profile: uplink
 interface status: quarantine
 sync status: out of sync
 cached commands:
 errors:
    command cache overrun
 recovery steps:
    bring interface online
switch#

show running-config port-profile

switch# show running-config port-profile
port-profile type ethernet UplinkProfile1
  description "Profile for critical system ports"
  vmware port-group
  switchport mode access
  switchport access vlan 113
  switchport trunk native vlan 113
  channel-group auto mode on
  no shutdown
port-profile type vethernet UplinkProfile2
  vmware port-group
  vmware max-ports 5
  switchport mode trunk
  switchport trunk native vlan 112
  channel-group auto mode on sub-group cdp
  no shutdown
switch#

show port-profile-role

switch# show port-profile-role name adminUser

Name: adminUser
Description: adminOnly
Users:
    hdbaar (user)
Assigned port-profiles:
    allaccess2
switch#

show port-profile-role users

switch# show port-profile-role users
Groups:
  Administrators
  TestGroupB
Users:
  dbaar
  fgreen
  suchen
  mariofr
switch#

Feature History for Port Profile Verification

Feature Name	Releases	Feature Information
show port-profile-role users	4.2(1)SV1(4)	This command output shows the available users and groups.
show port-profile-role	4.2(1)SV1(4)	This command output shows the configuration for port profile roles.
show running-config port-profile	4.0(4)SV1(2)	This command output shows the configuration for port profiles.
show running-config	4.0(4)SV1(2)	This command output has the following changes: Shows the port profile type (Ethernet or vEthernet). Optionally, you can display running configurations for all port profiles or a specific port profile.
show port-profile name	4.0(4)SV1(2)	This command output shows the port profile type, pinning, and channel-group configuration. The uplink capability is removed from the output of this command since port profiles used as uplinks are now configured as Ethernet type instead.
Port Profile verification	4.0(4)SV1(1)	This feature was introduced.