Table Of Contents New and Changed Information New and Changed Information This chapter lists the information that is new or was changed in this document per release, and where it is located. Feature Description Changed in release Where Documented ACL Logging You can log statistics for flows that match the ACL permit or deny conditions to monitor the flows. 4.2(1)SV1 (5.1) Chapter 9 "Configuring an IP ACL" UUFB You can block unknown unicast packets from flooding the forwarding path. 4.2(1)SV1(4a) Chapter 16 "Blocking Unknown Unicast Flooding" DHCP Snooping Relay Agent (Option 82) You can configure DHCP to relay VSM MAC and port information in DHCP packets. 4.2(1)SV1(4) Chapter 12 "Configuring DHCP Snooping" DHCP Snooping binding table You can clear DHCP snooping binding table entries for an interface. 4.2(1)SV1(4) Chapter 12 "Configuring DHCP Snooping" Enable DHCP You can enable or disable DHCP globally using the feature DHCP command. 4.2(1)SV1(4) Chapter 12 "Configuring DHCP Snooping" Enable SSH server You can enable or disable the SSH server using the feature DHCP command. 4.2(1)SV1(4) Chapter 7 "Configuring SSH" Enable Telnet server You can enable or disable the Telnet server using the feature DHCP command. 4.2(1)SV1(4) Chapter 8 "Configuring Telnet" Disable HTTP Server Disabling the HTTP server for security purposes. 4.2(1)SV1(4) Chapter 15 "Disabling HTTP Server" VSD Virtual service domains (VSDs) allow you to classify and separate traffic for network services. 4.0(4)SV1(2) Chapter 3 "Configuring VSD" DHCP Snooping Dynamic Host Configuration Protocol (DHCP) snooping acts like a firewall between untrusted hosts and trusted DHCP servers. 4.0(4)SV1(2) Chapter 12 "Configuring DHCP Snooping" Dynamic ARP Inspection (DAI) Dynamic ARP inspection (DAI) provides IP communication within a Layer 2 broadcast domain by mapping an IP address to a MAC address. 4.0(4)SV1(2) Chapter 13 "Configuring Dynamic ARP Inspection" IP Source Guard IP Source Guard is a per-interface traffic permit filter for IP and MAC addresses. 4.0(4)SV1(2) Chapter 14 "Configuring IP Source Guard"
New and Changed Information
This chapter lists the information that is new or was changed in this document per release, and where it is located.
ACL Logging
You can log statistics for flows that match the ACL permit or deny conditions to monitor the flows.
4.2(1)SV1 (5.1)
Chapter 9 "Configuring an IP ACL"
UUFB
You can block unknown unicast packets from flooding the forwarding path.
4.2(1)SV1(4a)
Chapter 16 "Blocking Unknown Unicast Flooding"
DHCP Snooping Relay Agent (Option 82)
You can configure DHCP to relay VSM MAC and port information in DHCP packets.
4.2(1)SV1(4)
Chapter 12 "Configuring DHCP Snooping"
DHCP Snooping binding table
You can clear DHCP snooping binding table entries for an interface.
Enable DHCP
You can enable or disable DHCP globally using the feature DHCP command.
Enable SSH server
You can enable or disable the SSH server using the feature DHCP command.
Chapter 7 "Configuring SSH"
Enable Telnet server
You can enable or disable the Telnet server using the feature DHCP command.
Chapter 8 "Configuring Telnet"
Disable HTTP Server
Disabling the HTTP server for security purposes.
Chapter 15 "Disabling HTTP Server"
VSD
Virtual service domains (VSDs) allow you to classify and separate traffic for network services.
4.0(4)SV1(2)
Chapter 3 "Configuring VSD"
DHCP Snooping
Dynamic Host Configuration Protocol (DHCP) snooping acts like a firewall between untrusted hosts and trusted DHCP servers.
Dynamic ARP Inspection (DAI)
Dynamic ARP inspection (DAI) provides IP communication within a Layer 2 broadcast domain by mapping an IP address to a MAC address.
Chapter 13 "Configuring Dynamic ARP Inspection"
IP Source Guard
IP Source Guard is a per-interface traffic permit filter for IP and MAC addresses.
Chapter 14 "Configuring IP Source Guard"