Feature
|
Description
|
Changed in release
|
Where Documented
|
Port binding
|
You can configure a static port binding with the auto option.
|
4.2(1)SV1(4a)
|
"Configuring Port Binding for vEthernet Port Profiles"
|
Port binding
|
You can configure a port binding with the dynamic [auto] option.
|
4.2(1)SV1(4a)
|
"Configuring Port Binding for vEthernet Port Profiles"
|
Port channel
|
The Creating a Port Profile for a Port Channel chapter was moved into the Cisco Nexus 1000V Interface Configuration Guide, Release 4.2(1)SV1(4a).
|
4.2(1)SV1(4)
|
"Configuring Port Channels"
|
Port binding
|
You can configure port binding for vEthernet port profiles that affects how VMware port IDs are assigned.
|
4.2(1)SV1(4)
|
"Configuring Port Binding for vEthernet Port Profiles"
|
Restrict the visibility of Port Profiles
|
Restricts port profile visibility by user or user group.
|
4.2(1)SV1(4)
|
"Restricting Port Profile Visibility"
|
mtu command added
|
The mtu command replaces the system mtu command for uplink, Ethernet type port profiles.
|
4.2(1)SV1(4)
|
"Creating a System Port Profile"
|
system mtu command removed
|
The system mtu command is removed and replaced by the mtu command for port profiles.
|
4.2(1)SV1(4)
|
"Creating a System Port Profile"
|
show port-profile sync-status command added
|
Displays interfaces that are out of sync with the port profile.
|
4.2(1)SV1(4)
|
"Verifying the Port Profile Configuration"
|
show port-profile virtual usage command added
|
Displays the port profile usage by interface.
|
4.2(1)SV1(4)
|
"Verifying the Port Profile Configuration"
|
Atomic Inheritance
|
Port profile configuration applied to member interfaces.
|
4.2(1)SV1(4)
|
"Overview"
|
Port Profile Rollback
|
After configuration failure, a port profile and its member interfaces are rolled back to the last good configuration.
|
4.2(1)SV1(4)
|
"Overview"
|
Interface Quarantine
|
After a configuration failure, interfaces are shut down to maintain accurate configuration.
|
4.2(1)SV1(4)
|
"Overview"
|
show running-config port-profile
|
New command for displaying the port profile configuration.
|
4.0(4)SV1(2)
|
"Verifying the Port Profile Configuration"
|
Uplink port profile
|
Port profiles are not classified as uplink, but are, instead, configured as Ethernet or vEthernet.
|
4.0(4)SV1(2)
|
Cisco Nexus 1000V Interface Configuration Guide, Release 4.2(1)SV1(4a)
|
Configuration limits
|
Added configuration limits for vEthernet interfaces, vEthernet trunks, port profiles, system profiles, and PVLANs.
|
4.0(4)SV1(2)
|
|
Feedback
