Table Of Contents

New and Changed Information

New and Changed Information

---

This chapter lists new and changed content by release, and where it is located in this document.

Content	Description	Changed in Release	Where Documented
Enable NetFlow feature	You can enable/disable the NetFlow feature.	4.2(1)SV1(4)	"Configuring NetFlow"
Add port profile as Local SPAN source	You can specify a port profile as a source for Local SPAN monitor traffic.	4.2(1)SV1(4)	"Configuring Local SPAN and ERSPAN"
Add port profile as ERSPAN source	You can specify a port profile as a source for ERSPAN monitor traffic.	4.2(1)SV1(4)	"Configuring Local SPAN and ERSPAN"
Hardware iSCSI Multipath	You can use a hardware iSCSI adapter for multipathing.	4.2(1)SV1(4)	"Configuring iSCSI Multipath"
SNMP MIBs added	List of supported MIBs.	4.2(1)SV1(4)	"MIBs"
Network Analysis Module (NAM)	NAM support for NetFlow data sources	4.0(4)SV1(3)	"Configuring NetFlow"
	NAM support for ERSPAN data sources	4.0(4)SV1(3)	"Configuring Local SPAN and ERSPAN"
ERSPAN Type-III header	The ERSPAN Type-III extended format header frame enhances support for network management, intrusion detection, and lawful intercept.	4.0(4)SV1(3)	"Configuring Local SPAN and ERSPAN"
Layer 3 Control	Allows a VSM to be Layer 3 accessible and control hosts that reside in a separate Layer 2 network.	4.0(4)SV1(2)	"Configuring the Domain"
iSCSI Multipath	Allows multiple routes between a server and its storage devices.	4.0(4)SV1(2)	"Configuring iSCSI Multipath"
Recommended Reading	Lists reading recommended before configuring the Cisco Nexus 1000V.	4.0(4)SV1(2)	"Preface"
Configuration Limits	Lists the configuration limits for the Cisco Nexus 1000V.	4.0(4)SV1(2)