Table Of Contents

New and Changed Information

New and Changed Information

---

This section lists the new and changed information in this document by release, and where it is located.

Feature	Description	Changed in Release	Where Documented
Flexible Network Uplink	Configuring flexible network uplink type.	4.2(1)SP1(4)	Chapter 3 "Configuring the Network Uplinks"
Native VLAN	Assigns native VLAN to a port channel.	4.2(1)SP1(4)	Chapter 3 "Configuring the Network Uplinks"
Shutting down port channel interfaces	Shuts down ports or port channel interfaces.	4.2(1)SP1(4)	Chapter 3 "Configuring the Network Uplinks"
OVA support for VSB	Create a VSB using an OVA file.	4.2(1)SP1(4)	Chapter 4 "Configuring Virtual Service Blades"
Migrating OVA	Export an OVA from ESX and import it into Cisco Nexus 1010 product family as a VSB.	4.2(1)SP1(4)	Migrating OVA to Cisco Nexus 1010 Product Family
Migrating a VSB	Migrates a VSB from Cisco Nexus 1010 to Cisco Nexus 1010-X	4.2(1)SP1(3)	Chapter 7 "Migrating a VSB to Cisco Nexus 1010-X"
Backing up and restoring a VSB	Create a backup copy of a VSB, store it remotely, and re-import it to restore a VSB.	4.2(1)SP1(3)	Chapter 6 "VSB Backup and Recovery"
CDP	New command show network cdp neighbors	4.2(1)SP1(3)	Chapter 4 "Configuring Virtual Service Blades"
Configuration Limits	Up to 6 VSMs and 3 VSGs can be configured.	4.2(1)SP1(3)	"Cisco Nexus 1010 Configuration Limits"
Escape sequence	Escape sequence changed from `$' to `^\' (CTRL + \).	4.2(1)SP1(2)	Chapter 4 "Configuring Virtual Service Blades"