Table Of Contents

F Commands

find

format

F Commands

---

This chapter describes the Cisco Nexus 1010 commands that begin with the letter F.

find

To find filenames beginning with a character string, use the find command.

find filename-prefix

Syntax Description

filename-prefix

First part or all of a filename. The filename prefix is case sensitive.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release	Modification
4.0(4)SP1(1)	This command was introduced.

Usage Guidelines

The find command searches all subdirectories under the current working directory. You can use the cd and pwd commands to navigate to the starting directory.

Examples

This example shows how to display filenames beginning with ospf:

switch# find ospf

/usr/bin/find: ./lost+found: Permission denied

./ospf-gr.cfg

./ospfgrconfig

./ospf-gr.conf

Related Commands

Command	Description
cd	Changes the current working directory.
pwd	Displays the name of the current working directory.

format

To format an external Flash device to erase the contents and restore it to its factory-shipped state, use the format command.

format filesystem:

Syntax Description

filesystem:

Name of the file system. The valid values are bootflash, logflash, slot0, usb1, or usb2.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release	Modification
4.0(4)SP1(1)	This command was introduced.

Examples

This example shows how to format an external Flash device:

switch# format slot0:

Related Commands

Command	Description
cd	Changes the current working directory.
dir	Displays the directory contents.
pwd	Displays the name of the current working directory.