Table Of Contents

New and Changed Information

New and Changed Information

---

This section describes the information in this document that is either new or has changed by release.

To find additional information about new features or command changes in a release, see the following:

•Release Notes.

•Command Reference.

Table 1 New and Changed Getting Started Information  

Feature	Description	Changed in Release	Where Documented
GUI Setup procedures	GUI application enhancements: •Migrates host, port groups, and PNICs. •Creates port profiles. •Migrates VSM to its own VEM. •Adds the host to the DVS.	4.0(4)SV1(3)	"Configuring the Software Using the GUI"
GUI Setup procedures	A new GUI application is added to set up the Cisco Nexus 1000V software.	4.0(4)SV1(2)	"Configuring the Software Using the GUI"
CLI Setup procedures	The procedures for setting up the Cisco Nexus 1000V using the CLI have been moved into this document from the Cisco Nexus 1000V Software Installation Guide, Release 4.0(4)SV1(3).	4.0(4)SV1(2)	"Configuring the Software Using the CLI"
Configuration Limits	Lists the Cisco Nexus 1000V configuration limits.	4.0(4)SV1(2)	Chapter 8, "Configuration Limits"
VSM Vmotion support	Support is added for Vmotion of the VSM VM.	4.0(4)SV1(2)	"Implementation Considerations"