FCIP Profiles

Item     Description
IP Address

The Internet address for this entity.

TcpPort

A TCP port other than the FCIP well-known port on which the FCIP entity listens for new TCP connection requests.

SACK

Whether the TCP Selective Acknowledgement Option is enabled to allow the receiver end to acknowledge multiple lost frames in a single ACK, enabling faster recovery.

KeepAliveTimeout

The TCP Keep alive timeout for all links within this entity.

MinReTxTimeout

The TCP minimum retransmit timeout for all the links on this entity.

MaxReTx

The Maximum number of times that the same item of data will be retransmitted over a TCP connection. If delivery is not acknowledged after this number of retransmissions then the connection is terminated.

SendBufSize

The aggregate TCP send window for all TCP connections on all Links within this entity. This value is used for Egress Flow Control. When the aggregate of the data queued on all connections within this entity reaches this value, the sender is flow controlled.

MaxBandwidth

This is an estimate of the Bandwidth of the network pipe used for the B-D product computation, which lets us derive the TCP receive window to advertise.

MinAvailBandwidth

The minimum available bandwidth for the TCP connections on the Links within this entity.

Est Round Trip Time

This is an estimate of the round trip delay of the network pipe used for the B-D product computation, which lets us derive the TCP receive window to advertise.

PMTUEnable

The path MTU discovery.

ResetTimeout

The time interval for which the discovered pathMTU is valid, before MSS reverts back to the negotiated TCP value.

CWM Enable

If true, congestion window monitoring is enabled.

CWM Burst Size

The maximum burst sent after a tcp sender idle period.